Find Parts That Fit Your Vehicle

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Genuine BMW M Performance - Corporate Logo
T#:348832
Part#: 25117527259
In Stock
$ 185.09 USD
Free Shipping
$ 185.09 USD
Free Shipping

The performance shifter adds about a 20% reduction in shifter travel, helping to make the shifter seem tighter and much sportier.

Fits the following vehicles:

2000-2006 E46 BMW M3

Show More Show Less
Racing Dynamics - Corporate Logo
T#:31423729
Part#: 1221982020
Ships in 5 Business Days
$ 175.00 USD
Free Shipping on orders $49 and up
Ina - Corporate Logo
T#:19646
Part#: 21517521360
Ships in 1 Business Day
$ 74.38

This product was last offered at the strikethrough price on
07-03-2026

$ 73.53 USD
Free Shipping on orders $49 and up
$ 73.53 USD
Free Shipping on orders $49 and up
CLUTCH CLUTCH RELEASE BEARING

OS Giken - Corporate Logo
T#:200230
Part#: MN024-HA
In Stock
$ 1,650.00 USD
Free Shipping
$ 1,650.00 USD
Free Shipping
If your MINI is only for competition use - autocross, time trial, or racing - this OS Giken LSD may be a better option than the standard 1.5-way unit. This race-spec LSD was developed over several seasons of competitive autocross. It uses a new high pressure ring for quicker response time and faster lockup. This makes it ideal for quick transitions and rapid on/off throttle motions typically encountered on the track. It's a one-way lockup so the car stays predictable under braking and gives the driver more feedback. For street use we prefer the normal 1.5-way setup because it's more progressive during lockup.

The biggest shortcoming of any MINI is not the lack of power - it's being able to put all of its useable power to the ground! The Cooper S is basically a one-wheel drive car and sending 200+ hp through that one tire does not live up to its full potential. A limited-slip differential is essential to any highly-tuned FWD car. The OS Giken Super-Lock is one of the most advanced clutch-type differentials on the market, and a favorite of autocrossers and road racers. The OS LSD for the MINI features ten clutch discs for a smooth and progressive lockup. By putting all of your available power to the ground you're at an instant advantage over the stock open-type differential. You'll be able to power through corners and on rough surfaces instead of uselessly spinning a wheel. Understeer is reduced by giving more bite to the tire that has the most traction. With an LSD in your MINI Cooper S you'll wonder why it wasn't first on your list to begin with (or why MINI/BMW left it out in the first place...).

The MNI OS Giken LSD uses a special 80W250 fluid that must be purchased separately.

This item fits the following BMWs:
2002-2006 R53 MINI MINI Cooper S (6MT manual transmission only)
2007-2013 R56 MINI MINI Cooper S (6MT manual transmission only)
Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:402424
Part#: 33108659989
In Stock
2% off MSRP $ 3,370.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,310.99 USD
Free Shipping
2% off MSRP
$ 3,370.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,310.99 USD
Free Shipping
Ensure your getting all the power you can to the road with this LSD from BMW Performance
OS Giken - Corporate Logo
T#:34382136
Part#: BM237HAKT
Ships in 2 Business Days
$ 2,100.00 USD
Free Shipping on orders $49 and up
Upgrade to a better performing LSD, includes tune.

OS Giken - Corporate Logo
T#:1387
Part#: BM237-HA
Ships in 2 Business Days
$ 1,950.00 USD
Free Shipping
$ 1,950.00 USD
Free Shipping
The M Dynamic limited slip unit on the M3 is designed to be a pure street car differential. It's simply not up to the rigors of professional or amateur racing. The OS Giken Super Lock LSD is giant step up in from a stock M3 lsd unit. It's ready for the extreme conditions of racing, offers 100% progressive locking capability, and is able to do this while operating smoothly and quietly. It's use of advanced technologies that make it perfect for both street cars AND pro race cars... and everything in between. We're excited to be carrying the OS Giken LSD unit in our performance catalog, as we've been using them in our own Championship winning M3 race cars.

OS Giken incorporated revolutionary new ideas when developing the their own limited slip diff, utilizing their accumulated racing knowledge and experience and over 4 years of development. Their design uses an unprecedented number of friction plates (up to 28 total!) for better locking force, better engagement/disengagement, and less generated heat. The end result of their efforts is the OS Giken's OS Super Lock LSD which offers incredible durability and reliability on street and track driven BMWs. The use of highest quality materials, precise machining, forged gears and sound engineering makes this LSD durable and reliable enough for road racing performance (which we can personally vouch for!). This is such a great design, in that it can be used in any situation -- whether it's for a street car, or a 100% Professional race car. Zero break-in required. Super smooth and quiet engagement, and 100% progressive locking capability. Professional installation is recommended.

This Limited Slip Differential Unit fits the following BMWs:
2001-2006 E46 M3 coupe & convertible
2008-2013 E9X M3 coupe & convertible
1991-1995 E34 M5 sedan
1999-2003 E39 M5 sedan
2006-2008 E85 Z4M Z4 M Coupe, Z4 M Roadster
Show More Show Less
OS Giken - Corporate Logo
T#:2209
Part#: BM533-BF6EA
Ships in 2 Business Days
$ 999.99 USD
Free Shipping
$ 999.99 USD
Free Shipping
This kit includes parts needed to overhaul the OS Giken E90/E92 M3 Grand Am legal clutch kit, including clutch discs (2), center plates, and cover bolts (all). As used in the Grand Am KONI Challenge GS class V8 M3s, including both Turner Motorsport E92 M3 race cars.
Show More Show Less

OS Giken - Corporate Logo
T#:2193
Part#: BM533-EB
Ships in 2 Business Days
$ 90.00 USD
Free Shipping
$ 90.00 USD
Free Shipping
This rugged tool simulates the input shaft of the 2008-2013 E9X M3 transmission, for easy installation of the OS Giken racing clutch kit. This tool is simply a must if you will be installing a clutch into the newer V8 model M3. This is a OS Giken part but can be used for other E9X M3 clutch kits where a more durable metal tool is called for.
Show More Show Less

Atlantic Automotive Engineering - Corporate Logo
T#:42705796
Part#: GBA-59281KT
Ships in 3 Business Days
$ 2,563.99 USD
Free Shipping on orders $49 and up
$ 2,563.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less
OS Giken - Corporate Logo
T#:338592
Part#: BM533-BF6
Ships in 2 Business Days
Starting at $ 2,150.00 USD
Free Shipping
Starting at $ 2,150.00 USD
Free Shipping
This racing flywheel and clutch kit is made by renowned drivetrain specialist OS Giken. Complete fly wheel & clutch setup as used on our own TMS E92 M3 race cars. This setup is ideal for both endurance racing or high horsepower applications that have very limited street use but require more clamping power than stock. It has been approved for use in the GRAND AM Continential Challenge GS race class, approved by GRAND AM rules and regulations.

Includes flywheel, clutch discs (2 disc clutch), center plate, pressure plate, aluminum cover, 360 degree housing (for clutch assembly), cover bolts, flywheel bolts, throw-out bearing, and release sleave assembly. Weighs 5% less than the stock E90/E92 M3 flywheel and clutch setup. This setup is intended for racing use only (not for daily driven street cars.) We recommend using the OS Giken clutch alignment tool during installation (sold separately).
Show More Show Less
OS Giken - Corporate Logo
T#:30164597
Part#: MN023-BJ5
Back Ordered
$ 1,920.00 USD
Free Shipping
$ 1,920.00 USD
Free Shipping

MINI R Chassis OS Giken Clutch Kit - STR Series enhances performance and durability for your BMW or MINI. This high-performance clutch kit from OS Giken is designed specifically for MINI R chassis models, offering improved torque capacity and durability. With its STR series design, it ensures smooth engagement and precise control, perfect for both street and track applications. Engineered with high-quality materials, this clutch kit provides reliable performance under demanding conditions.

  • Enhances performance and durability
  • Designed specifically for MINI R chassis models
  • Improved torque capacity for enhanced power transfer
  • STR series design ensures smooth engagement
  • Suitable for both street and track use

Upgrade your BMW or MINI R chassis with the MINI R Chassis OS Giken Clutch Kit - STR Series for superior clutch performance and reliability.

Show More Show Less


INA Clutch Pilot Bearing
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:399014
Part#: 034105313A
In Stock
$ 8.15

This product was last offered at the strikethrough price on
06-16-2026

$ 6.99 USD
Free Shipping on orders $49 and up
$ 6.99 USD
Free Shipping on orders $49 and up
Whenever you replace your clutch, you want to be sure that every single part that can be serviced while disassembled is new and in great shape. This saves you time down the road if a small component not serviced in a clutch change fails. This is a perfect replacement for your clutch pilot bearing with the same outside and inside diameter. A great way to be sure that everything installed during your clutch change works in harmony.
Show More Show Less
Vaico - Corporate Logo
T#:44529449
Part#: 24118612901KIT
In Stock
$ 425.99

This product was last offered at the strikethrough price on
05-02-2026

$ 374.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 425.99

This product was last offered at the strikethrough price on
05-02-2026

$ 374.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
This Automatic Transmission Service Kit for your ZF 8HP transmission is a great choice to ensure your transmission is properly cared for, ensuring many more years of smooth and reliable operation. Transmission fluid can break down over time and filters can clog, leading to poor fluid flow, which can cause starvation of sensitive components and accelerated wear and tear. Replacing the fluid and filter regularly will make sure that internal transmission components are properly lubricated and cooled, helping to extend the lifespan of your transmission.
Show More Show Less
OS Giken - Corporate Logo
T#:54388400
Part#: MN023-AJ60K
Ships in 5 Business Days
New Item
$ 150.00 USD
Free Shipping
$ 150.00 USD
Free Shipping
Throw out bearing for OS Giken clutches

Atlantic Automotive Engineering - Corporate Logo
T#:42705795
Part#: GBA-59251KT
Ships in 3 Business Days
$ 2,563.99 USD
Free Shipping on orders $49 and up
$ 2,563.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less

Atlantic Automotive Engineering - Corporate Logo
T#:42705799
Part#: GBA-59251MKT
Ships in 3 Business Days
$ 3,519.99 USD
Free Shipping on orders $49 and up
$ 3,519.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less
Atlantic Automotive Engineering - Corporate Logo
T#:42705797
Part#: GBA-59260KT
Ships in 3 Business Days
$ 2,563.99 USD
Free Shipping on orders $49 and up
$ 2,563.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less

Atlantic Automotive Engineering - Corporate Logo
T#:42705800
Part#: GBA-59260MKT
Ships in 3 Business Days
$ 3,519.99 USD
Free Shipping on orders $49 and up
$ 3,519.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less
OS Giken - Corporate Logo
T#:23383349
Part#: MN023-AQ6
Ships in 3 Business Days
$ 1,680.00 USD
Free Shipping
$ 1,680.00 USD
Free Shipping
Introducing the Mini Grand Touring Clutch, a revolutionary addition to the clutch lineup. This clutch incorporates cutting-edge technology from our Racing Multi-plate Clutches, enhanced further by our exclusive "floating pressure system." Say goodbye to rough and noisy drives - experience a seamless and chatter-free driving sensation. The Mini Grand Touring Clutch is offered in both single and twin plate configurations, with options for soft or hard clutch covers to cater to various engine outputs. Achieve a maximum torque of 315 FT/LBS with this innovative clutch.
  • Incorporates advanced "floating pressure system" for a smooth driving experience
  • Retains technology from Racing Multi-plate Clutches
  • Available in single and twin plate configurations
  • Options for soft or hard clutch covers to suit engine output
Show More Show Less

Atlantic Automotive Engineering - Corporate Logo
T#:42705801
Part#: GBA-59280MKT
Ships in 3 Business Days
$ 3,519.99 USD
Free Shipping on orders $49 and up
$ 3,519.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less

Atlantic Automotive Engineering - Corporate Logo
T#:42705802
Part#: GBA-59281MKT
Ships in 3 Business Days
$ 3,519.99 USD
Free Shipping on orders $49 and up
$ 3,519.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less
JM Turbo Coopers - Corporate Logo
T#:26238503
Part#: 03-655S
Ships in 10 Business Days
$ 1,128.99 USD
Free Shipping on orders $49 and up

JMTC MINI Cooper S Solid Flywheel Conversion Clutch Kit

Upgrade your Mini's clutch system with JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit. This kit offers a direct replacement for the OEM dual mass flywheel and clutch set, providing enhanced durability and performance.

Key Benefits:

  • Direct replacement for OEM dual mass flywheel and clutch set
  • Solid single mass flywheel ensures durability and reliability
  • Interchangeable with OEM clutch sets and components
  • Steel surface can be refinished for extended use
  • Thicker friction surface area for better heat absorption and distribution
  • Resistant to catastrophic failure
  • Made with Clutchtex Kevlar and Miba Ceramics for extended life
  • Includes clutch disc, centering tool, pressure plate, release bearing, and bolts
  • No break-in period for ceramic clutch, while Kevlar clutch may take up to 1000 miles
  • Installation kit and new master clutch cylinder recommended for optimal performance and longevity

Upgrade your Mini's clutch system today with JMTC's reliable and performance-driven clutch kit.

Show More Show Less


OS Giken - Corporate Logo
T#:34382134
Part#: LSD-TUNE
Ships in 2 Business Days
$ 150.00 USD
Free Shipping
$ 150.00 USD
Free Shipping
OS Giken - Corporate Logo
T#:54388380
Part#: MN021-BJ5
Ships in 2 Business Days
New Item
$ 1,920.00 USD
Free Shipping
$ 1,920.00 USD
Free Shipping
Upgrade your drivetrain and experience the perfect balance of track performance and street drivability.
Racing Dynamics - Corporate Logo
T#:26238484
Part#: 1221956030
In Stock
$ 145.00 USD
Free Shipping on orders $49 and up

Enhance the shifting experience of your Mini Cooper S Gen 3 with this quick shift kit. Crafted with precision CNC machining from billet aluminum, this kit reduces shift travel by approximately 40%, providing smoother and quicker gear changes. With its large adjustment range, drivers can customize the shift lever travel to suit their driving preferences. Adjustment can be easily done from inside the car using a 16 mm wrench. The kit includes a convenient removal tool to assist in removing the OEM shifter.

  • Precision CNC machined from billet aluminum
  • Reduces shift travel by approximately 40%
  • Large adjustment range for personalized shift lever travel
  • Easy adjustment from inside the car
  • Includes removal tool for OEM shifter
Show More Show Less

Mahle - Corporate Logo
T#:641672
Part#: 17217559962
Ships on Aug 28, 2026
$ 69.35 USD
Free Shipping
$ 69.35 USD
Free Shipping
The thermostat is used in the automatic transmission cooler system.

KMAC - Corporate Logo
T#:28803229
Part#: 195416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping on orders $49 and up

Upgrade your Mini with the MINI F Chassis K-MAC Stage 3 Full Race - Front Adjustable Camber/Caster Plates.

These adjustable camber/caster plates offer precise control over camber and caster settings, allowing for optimized performance on the track. Crafted with high-quality materials, they ensure durability and reliability even under racing conditions. With easy adjustability and precise engineering, they provide enhanced handling and cornering capabilities, giving you a competitive edge on the race circuit.

Benefits:

  • Precise control over camber and caster settings
  • Optimized performance on the track
  • High-quality materials for durability and reliability
  • Easy adjustability
  • Enhanced handling and cornering capabilities
  • Competitive edge on the race circuit
Show More Show Less
Vaico Automatic Transmission Oil Pan Kit - F22 F30 F10 G30 F06 F01 G1...
We Price Match - Give Us A Call or Chat! For GA8HP70, GA8HP76, GA8HP75, GA8HP51, GA8HP50, or GA8HP45Z automatic transmissions - Does not fit GA8P Hybrid Transmissions
Vaico - Corporate Logo
T#:21374103
Part#: 24115A13115
Special Order: No Guaranteed ETA
$ 135.99

This product was last offered at the strikethrough price on
02-19-2026

$ 131.99 USD
Free Shipping on orders $49 and up
$ 131.99 USD
Free Shipping on orders $49 and up
GA8HP 8 speed automatic transmission. Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.
Show More Show Less

OS Giken - Corporate Logo
T#:22756718
Part#: MN023-AJ6
Back Ordered
$ 1,490.00 USD
Free Shipping
$ 1,490.00 USD
Free Shipping

Upgrade Your Clutch for Spirited Driving with STR Clutch

Elevate your driving experience with the STR Clutch, perfect for those who enjoy spirited driving and require a balance between street and occasional race performance. While it may differ from a Factory Dual Mass Clutch, the STR Clutch comes in single and twin plate configurations, paired with a unique clutch cover to maintain a factory clutch pedal feel. This ensures a race-ready clutch that's also easy to handle in everyday driving situations.

Key Features:

  • Available in single and twin plate configurations
  • Unique clutch cover for a factory-like pedal feel
  • Suitable for spirited driving and occasional racing
  • Dampened Single Plate with Soft Diaphragm
  • Release Assembly included
  • Maximum capacity: 285 FT/LBS TORQUE

Upgrade your clutch and enjoy the performance and versatility of the STR Clutch.

Show More Show Less
Vaico - Corporate Logo
T#:6181672
Part#: 26117589747
Special Order: No Guaranteed ETA
$ 303.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping
Center driveshaft support including the bearing pressed into rubber mount.

Atlantic Automotive Engineering - Corporate Logo
T#:42705798
Part#: GBA-59280KT
Ships in 3 Business Days
$ 2,563.99 USD
Free Shipping on orders $49 and up
$ 2,563.99 USD
Free Shipping on orders $49 and up
These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.
Show More Show Less

Ina - Corporate Logo
T#:41965073
Part#: HK3512
Back Ordered
$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
This OEM INA needle bearing replaces BMW part number 24111218008, which stabilizes the rear output flange of ZF 4HP22/24 transmissions.