This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.
To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.
Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.
Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.
Key Features:
Cast aluminum construction offers superior strength and resilience over the OE plastic pan
Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating
Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance
Hard coat anodized finish provides exceptional corrosion resistance and longevity
Integrated magnets collect metallic debris, protecting transmission internals
Installation:
Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The ZF S5D 320Z 5-speed transmission is known for its robust design, exceptional durability, and impressive power-handling capability. Unfortunately, as these transmissions age, shifter-related issues have become increasingly common. Problems such as difficulty selecting gears, a sticky shifter, or a decline in shift quality are often the result of worn detent springs, pins, and bushings. These components are essential for precise gear engagement and proper shifter centering, making their replacement a critical step in maintaining optimal performance.
Replacing detents requires specialized tools known as "drifts," which are notoriously hard to find. Fortunately, we've developed a complete Detent Tool Kit, featuring five precision-engineered drifts designed for exact fitment in the ZF transmission's detent bores. This toolset makes detent replacement straightforward and minimizes the risk of damage to internal transmission components.
Features
Complete Tool Kit: Includes five precision-machined drifts specifically designed for the ZF 5-speed transmission’s detent bores and caps. Hassle-Free Detent Replacement: Simplifies the process of removing and installing detents with professional-grade precision. Protects Your Investment: Reduces the risk of damaging internal transmission components during service. Durable Construction: Made from heavy-duty 1045 steel for exceptional strength and long-lasting reliability.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Engineered in-house, our torque plate is designed to provide a robust and uniform clamping surface between the flywheel and crankshaft across a range of BMW engine applications. Compatible with both factory and Turner performance flywheels, it helps prevent surface galling and ensures consistent torque distribution during installation.
Features:
Prevents galling and wear at the crankshaft-to-flywheel interface under high clamping loads
Promotes even load distribution for improved fastener integrity and long-term reliability
Compatible with a variety of BMW flywheel setups, including OEM and aftermarket configurations
Design:
Precision-machined from cold rolled steel for high strength and dimensional accuracy
Heat treated to 32 HRC for increased surface hardness and wear resistance
Clear zinc anodized for enhanced corrosion protection
Laser-etched Turner logo
Ideal for performance builds and drivetrain refreshes, this torque plate is a critical component for maintaining proper flywheel installation and maximizing long-term durability across multiple BMW platforms.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Lightweight flywheel for quicker, effortless revs that improve throttle response and free up lost horsepower. Tested and approved by our engineering team at Turner Motorsport. Tested in early, late, ETA and IS model E30s for confirmed fitment.
Introducing our Turner Flywheel: an ingenious blend of lightweight design, rich features, and remarkable strength! Crafted from 4140 HT Steel, this flywheel is precision-machined from a solid piece, ensuring unmatched durability. By strategically trimming excess weight from its original design, we've achieved a significant reduction in weight, giving new life to your M20 engine. With upgraded efficiency, your M20 can now swiftly spin to high RPMs, unleashing the full power and prowess of this formidable engine. Our flywheel features a ring gear profile compatible with all starters, alongside a reference tab tailored for early cars equipped with bellhousing-mounted sensor crank position detection.
Do you have an early model transmission with the crank sensors on the bellhousing? Maybe you have a late 325is with the crank sensor on the front of the engine, or maybe you have a 1988 super ETA. No matter which E30 model you have, our flywheel is the perfect choice for you.
During the engineering process we encountered the full spectrum of M20 and flywheel combinations. Early cars with bellhousing crank sensors, late cars with front mounting crank sensors and even a super ETA. On this adventure we found both early and late single mass flywheels and even the dual mass that we thought for sure was just a myth. At first we were hesitant that we could make one flywheel to fit them all but with the persistence of our engineering team(fleet of E30 enthusiasts) we can proudly say our M20 flywheel does in fact fit all engine and transmission applications you can think of.
Features and benefits:
Fits early and late models with M20
Fits shallow and deep bellhousing transmissions
Ring gear suited for both starters (P# 12411726504 + 12411361874)
Heavier than other lightweight flywheels, lighter than OEM, its like the Goldie Locks of flywheels - its just right
Reference pin for bellhousing crank sensor
Strong Single-Piece 4140 HT Steel construction
Designed to be used with factory and OE clutches
Weight Comparisons:
Factory single mass flywheel EARLY (11221705046) - 23.69 lbs.
Factory single mass flywheel LATE (11221706573) - 18.74 lbs.
Dual mass flywheel (21211225979) - 27.56 lbs.
Turner flywheel - 14 lbs.
What you need:
Short bellhousing transmissions (I/IS) - Throw-out bearing P# 21517521471
Tall bellhousing transmission (ETA) - Throw-out bearing P# 21511204525
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.
For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.
WHY UPGRADE?
Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.
Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.
FEATURES & BENEFITS
Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN
6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:
Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
The factory BMW S65 dual-mass flywheel is engineered with comfort in mind, catering to the luxury-oriented expectations of the brand’s driving experience. Its design focuses on dampening drivetrain vibrations, smoothing out gear transitions, and minimizing harshness during operation. However, this refinement costs valuable performance. The dual-mass flywheel adds a substantial 27 lbs of rotational mass to the drivetrain, which significantly hinders throttle response and makes rev-matching feel sluggish and disconnected. Moreover, dual-mass flywheels are notorious for being a weak link in modified or high-performance builds and can prove costly to replace when they inevitably fail.
Our Single-Mass Lightweight Flywheel Conversion addresses all of these shortcomings with a purpose-built, lightweight, single-mass design that prioritizes performance. Weighing in at only 19 lbs., this design significantly reduces rotational mass, allowing your S65 to achieve its true motorsport potential!
Features & Benefits:
Precision machined from 4140 HT heat-treated chromoly steel for exceptional toughness, even wear properties, and increased durability.
Material quality promotes even wear across the entire friction surface, prolonging component lifespan.
Heat treated to HRC 28-32, tempered to relieve stress and improve dimensional stability.
Hardness improves component wear characteristics.
Black oxide coated for corrosion resistance on non-friction surfaces.
Precision balanced to exceed OEM specification (G16 spec to 175g-mm).
Specifically designed to work with S65 OE-architecture clutches.
Optimized step height maximizes clutch clamp load and offers a prolonged service life.
Performance:
8 lbs. lighter than the factory BMW flywheel!
OEM Dual-Mass: 27 lbs.
Turner Motorsport Single-Mass: 19 lbs.
Faster revs
Improved throttle response and acceleration
Allows for a more engaging driving experience and delivers a feeling of direct connection
Installation:
Flywheel Hardware: For added peace of mind, apply Blue or Orange Loctite when installing factory flywheel bolts that do not come with pre-applied threadlocker.
This product was last offered at the strikethrough price on
05-07-2026
Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.
Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.
Features & Benefits:
Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:
Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:
Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
BMW E30 325i/iS DSSR (187mm) - Turner Motorsport is the ultimate solution to eliminate shifter slop, providing tighter and crisper shifts for your BMW. Developed in collaboration with Rennline, this Dual Shear Selector Rod (DSSR) is designed to significantly reduce flexibility in the selector rod, ensuring a more precise and responsive shifting experience. Whether you're using the stock shifter or a Turner short shift kit, this DSSR will enhance the accuracy of your gear selections with minimal effort.
Does not include a new selector rod joint.
Benefits:
Enhanced Shift Precision: Reduces play and deflection in the linkage, delivering a more positive feel in the shifter.
High-Quality Construction: Crafted from 303 stainless steel for superior corrosion resistance and long-lasting durability.
Compatible Design: Fits BMW E30 325i/iS models with selector rod part 25111221657 and selector joint part 25117580281.
Improved Performance: Works seamlessly with both stock and Turner Motorsport short shifters.
Complete Kit: Includes necessary hardware for easy installation and optimal performance.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Used when retrofitting an OEM or aftermarket CSL intake on a vehicle with SMG transmission.
Its no secret the CSL intake plenum is the pivotal upgrade for your S54. If you are fortunate enough to have an SMG equipped vehicle you are going to need a bracket to relocate the expansion tank. Our Turner motorsport bracket fits perfectly with the engine bay to facilitate the installation of your genuine or Turner branded CSL intake plenum.
Design:
Direct fit, perfect OEM replacement
304SS sheet metal design, engineered to be simpler and cheaper than its formed OE counterpart
Reverse engineered with FARO laser scanning and Solidworks CAD technology
Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.
Since 2004, GSP has been a trailblazer in the North American axle industry. With an extensive range of applications, a wide SKU count, and a track record of introducing the latest applications ahead of the competition, GSP is the go-to choice. In 2010, GSP expanded into hub assemblies and swiftly earned the trust of the industry, becoming the most reliable brand.
When it comes to your hub assembly, axle shaft, and loaded strut needs, you can have full confidence in GSP's expertise.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
3/1991-1995 E34 BMW 525i 530i 535i 540i
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il
3/1992-1999 E31 BMW 840ci 850ci 850csi
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
E30 BMW M3
E28 BMW 524td 528e 533i 535i 535is M5
E24 BMW 633CSi 635CSi M6
Upgrade your MINI's clutch system with this comprehensive Performance Clutch Installation Kit, featuring an aluminum flywheel for enhanced performance. Designed for stage one clutch upgrades, the FX300 (Stage 3) kit offers a high-performance street system with 70% more holding capacity than stock. Enjoy smoother shifts and improved durability with the heavy-duty reinforced pressure plate and Hi-Leverage™ pressure ring design. The kit includes a sprung hub/cushioned disc and a steel-backed fiber friction-lined disc for optimal performance.
Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.
FX250 (Stage II)
All Clutch Masters clutch kits come complete with:
This clutch kit does not include a flywheel. Requires use of single mass flywheel
Fitment in following BMWs:This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission *Door Buster Special - New Product*
Enhance your Mini's performance with the comprehensive Performance Clutch Installation Kit, designed for a stage one clutch upgrade, featuring an Aluminum Flywheel. The FX400 (Stage 4) kit offers a high-performance street system, equipped with a Heavy-Duty reinforced pressure plate, Hi-Leverage™ pressure ring design, and a Sprung hub/cushioned disc. With 70% more holding capacity over stock, this kit ensures exceptional performance.
Elevate your BMW's performance with the Performance Clutch Installation Kit, comprising a clutch pressure plate and friction disc stage one clutch upgrade. Designed specifically for use with FW-635-AL or FW-635-SF, this FX100 (Stage I) kit is engineered to deliver a high-performance street system, boasting a remarkable 70% increase in holding capacity compared to the stock setup. The kit features a heavy-duty reinforced pressure plate ensuring enhanced performance, coupled with the innovative Hi-Leverage™ pressure ring design for superior functionality. The inclusion of a sprung hub/cushioned disc and steel-backed organic friction material guarantees durability and exceptional performance.
Upgrade your Mini's clutch system with the Performance Clutch Installation Kit, ideal for stage one clutch upgrades. This kit includes everything you need for installation, featuring the FX400 (Stage 2) clutch. Benefits include:
This comprehensive performance clutch installation kit is your ticket to an exciting stage one clutch upgrade. It's equipped with an aluminum flywheel, providing all the essential components for enhancing your car's performance.
The FX300 (Stage 3) clutch system is designed for high-performance street driving. With a holding capacity that's 70% greater than stock clutches, thanks to the heavy-duty reinforced pressure plate, it's perfect for enthusiasts seeking a performance boost. Clutch Masters' unique Hi-Leverage™ pressure ring design ensures top-tier performance and durability.
The sprung hub/cushioned disc and steel-backed Segmented Kevlar disc contribute to its robustness, making it suitable for demanding driving conditions.
With every Clutch Masters clutch kit, you receive vital components, including the pressure plate, clutch disc, throw-out bearing (when applicable), pilot bearing or bushing (when applicable), and an alignment tool.
Upgrade your vehicle's clutch system and experience a new level of performance with the FX300 Stage 3 Clutch Installation Kit.
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.
This item fits the following BMWs:
E39 BMW 525i 528i 530i 540i
E52 BMW Z8
This product was last offered at the strikethrough price on
07-24-2026
Enhance the performance of your MINI Cooper S with the Lightweight Aluminum Flywheel (11lbs.) FW-801-AL R52 R53. Crafted to perfection, this clutch master lightweight flywheel is designed specifically for MINI Cooper S models, providing improved functionality and responsiveness. Weighing just 11lbs., it offers a lightweight yet durable solution for optimizing your vehicle's performance.
MINI R50 R52 Stage 1 MINI Cooper Clutch Kit - FX100 03056-HD00 provides an ideal upgrade for those seeking enhanced performance and durability. This Stage 1 clutch kit includes everything necessary for a significant improvement over the stock clutch. The FX100 features a dampened disc version designed for high performance on the street.
Please note that this kit does not include a flywheel.
Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.
FX200 (Stage 2)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed kevlar friction material
