Find Parts That Fit Your Vehicle

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Throw Out Bearing (Sachs) for Most BMWs (see list)
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:371823
Part#: 21517521471
In Stock
$ 50.99 USD
Free Shipping on orders $49 and up
Standard Throwout Bearing. Works with stock clutch/pressure plate or HD setup. Note: When you buy a standard clutch kit from us, it includes the throw-out bearing. This part is also known by a few other part#'s, including BMW Part# 21 51 1 223 366 (21511223366), BMW Part# 21 51 2 226 729 (21512226729), and Sachs part# 3151231031.

This throw out bearing fits most BMWs including:
1975-1983  E21 3 Series  - all including 320i, 323i
1975-1989  E24 6 series  including 630csi, 633csi, 635csi & E24 M6
1982-1988  E28 5 Series  (all) including 528e, 533i, 535i & E28 M5
1984-1991  E30 3 series  (all) including 318i, 318is, 325, 325e, 325es, 325i, 325is, 325ix & E30 M3
1988-1994  E32 7 Series  6 cylinder (735i, 735iL)
1989-1995  E34 5 Series  6 cylinder (525i & 535i)
1992-1999  E36 3 Series  (all) including 318i, 318is, 318ti, 325i, 325is, 323is, 328i, 328is, and E36 M3
1997-2003  E39 5 Series  6 cylinder, including 528i, 525i & 530i
1999-2005  E46 3 Series  with 5 speed, including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330Ci & 330xi (**no ZHP 6 speed)
2000-2006  X5  6 cylinder / X5 3.0
1996-2002  Z3 Roadster/Coupe  including Z3 1.9, 2.3, 2.5, 2.8 and 3.0
Show More Show Less
Clutch Slave Cylinder - E46 (Incl M3-non SMG), X3, Z4 and MZ4 ...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:1309
Part#: 21526766279
In Stock
$ 58.13

This product was last offered at the strikethrough price on
03-06-2026

$ 48.99 USD
Free Shipping on orders $49 and up
$ 48.99 USD
Free Shipping on orders $49 and up
This is a replacement clutch slave cylinder, made by a high quality OEM manufacturer. Replaces 21526785966 and 21526775922.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 - Not for SMG
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
GSP North America - Corporate Logo
T#:389719
Part#: NCV27503
In Stock
$ 164.99 USD
Free Shipping
$ 164.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E36 BMW M3

Show More Show Less

GSP North America - Corporate Logo
T#:389693
Part#: NCV27526
In Stock
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E24 BMW 633CSi M6

E28 BMW 524td 528e 533i 535i 535is M5

E34 BMW 530i 535i 540i M5

Show More Show Less

Sachs Clutch Kit - E46 M3
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:4208
Part#: 21212282667
In Stock
$ 467.75 USD
Free Shipping on orders $49 and up
E46 M3 Sachs OEM Clutch Kit. Disc, Pressure Plate and Throw-out bearing. Fits manual gearbox and SMG. While you are replacing the clutch you will have easy access to many parts that are not normally easy to get to. It is a perfect time to replace those items with minimal extra labor. Below are a list of some of the items that you may want to replace.

Optional items:
Exhaust Gaskets & Hardware:
  • 11627830668 - exhaust seal ring x 2
  • 11621318568 - bolts x 4
  • 18301317898 - nuts x 4
    Transmission Seals:
  • 23127501580 - shift shaft seal
  • 23121222769 - output seal
  • 23127501328 - input seal
    Additional Clutch Parts:
  • 21511223328 - clutch pivot pin
  • 11211720310 - pilot bearing
  • 21207548052 - pressure plate bolts x 6

    Fitment:
    2001-2006 E46 M3 manual coupe, convertible
    2001-2006 E46 M3 SMG coupe, convertible
    2003-2006 E46 M3 CSL (SMG)
  • Show More Show Less
    GSP North America - Corporate Logo
    T#:389698
    Part#: NCV27527
    Ships in 2 Business Days
    $ 104.99 USD
    Free Shipping
    $ 104.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E34 BMW 525i 525iT 530i 535i

    Show More Show Less

    Clutch Kit - E30 325i/is 1987-1991, E34 525i 1989-1990
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:1665
    Part#: 21211223102
    In Stock
    $ 261.99 USD
    Free Shipping
    $ 261.99 USD
    Free Shipping
    Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW.

    This item fits the following BMWs:
    1987-1991 E30 BMW 325i 325ic 325is
    1989-1990 E34 BMW 525i
    Show More Show Less
    DKM Stage 3 Performance Twin Disc Clutch Kit w/ 8-Bolt Single Mass Fl...
    For vehicles with a production date up to 01/2009
    DKM - Corporate Logo
    T#:583963
    Part#: MS-006-075
    In Stock
    $ 1,299.99 USD
    $ 1,299.99 USD

    Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life.

    Tracking your vehicle is all fun and games until you start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much-improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention.

    Kit Contents:
    Pressure Plate
    Two Organic Discs
    Steel Single Mass Flywheel
    Pilot Bearing/Bushing and Throw-out Bearing (when applicable)
    Alignment Tool

    Show More Show Less

    GSP North America - Corporate Logo
    T#:389705
    Part#: NCV27522
    In Stock
    $ 90.99 USD
    Free Shipping
    $ 90.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E46 BMW 325xi 330xi

    Show More Show Less

    DKM - Corporate Logo
    T#:393279
    Part#: MA-006-005
    Ships on Oct 26, 2026
    $ 749.99 USD
    $ 749.99 USD

    Looking to upgrade your stock clutch to something a little more beefy?  The performance clutch kits from DKM are a great option to help get power to the wheels without breaking the bank. Working with Competition Clutch, DKM clutch discs and plates are constructed using quality materials to obtain greater strength and heat tolerance than OE clutches, helping to prevent wear and tear while still giving you increased toque capacity for quicker shifts and more power management.

    Stage 1 Kits are best for moderately modified vehicles that want to add a single mass flywheel for quicker revs and a sportier engagement, without adversely affecting the clutch pedal's feel. *This is a 10 Spline clutch kit.*

    This Stage 1 performance clutch kit includes the following items:

    • Pressure Plate
    • Sprung Organic Disc
    • Iron Single Mass Flywheel
    • Pilot Bearing/Bushing and Throw-out Bearing
    • Alignment Tool

       

    **For vehicles with 5-speed transmission only.

    Show More Show Less
    GSP North America - Corporate Logo
    T#:389709
    Part#: NCV27523
    In Stock
    $ 117.99 USD
    Free Shipping
    $ 117.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E46 BMW 325xi 330xi

    Show More Show Less
    JB Racing - Corporate Logo
    T#:3771
    Part#: 520-010-240
    Ships in 9 Business Days
    $ 602.00 USD
    Free Shipping
    $ 602.00 USD
    Free Shipping
    As Used on Project E36 M3
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

    Stock Flywheel Weight = 25.5lbs
    JB Flywheel Weight = 10.0lbs

    This item fits the following BMWs:
    1995-1999 E36 BMW M3
    1998-2002 Z3 BMW Z3 M Roadster M Coupe
    Show More Show Less


    Clutch Release Bearing
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:28803208
    Part#: 21511204525
    In Stock
    $ 101.99

    This product was last offered at the strikethrough price on
    03-17-2026

    $ 69.99 USD
    Free Shipping on orders $49 and up
    $ 69.99 USD
    Free Shipping on orders $49 and up
    Clutch Slave Cylinder
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:14353722
    Part#: 21522282055
    In Stock
    $ 48.99 USD
    Free Shipping on orders $49 and up
    GSP North America - Corporate Logo
    T#:27238720
    Part#: NCV27043
    In Stock
    $ 131.99 USD
    Free Shipping on orders $49 and up
    GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional
    Show More Show Less

    Sachs Clutch Kit - E28, E30, E34, E36
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:370557
    Part#: 21211223546
    Ships in 5 Business Days
    $ 193.99 USD
    Free Shipping on orders $49 and up
    Replace your worn or slipping clutch to restore drivability

    Sachs - Corporate Logo
    T#:374821
    Part#: 21212226428
    In Stock
    $ 336.99 USD
    Free Shipping
    $ 336.99 USD
    Free Shipping
    240mm clutch kit
    HD/Perf Street Sprung
    Must be used with ACT Flywheel 601010 or 601015
    ACT - Corporate Logo
    T#:567299
    Part#: BM9-HDSS
    In Stock
    $ 897.00 USD
    Free Shipping
    $ 897.00 USD
    Free Shipping
    This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.
    Show More Show Less

    GSP North America - Corporate Logo
    T#:389676
    Part#: NCV27990
    Ships in 2 Business Days
    $ 111.99 USD
    Free Shipping
    $ 111.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E82/88 BMW 128i

    E46 BMW 323i 323is 325Ci 325i 325xi 328CI 328i 

    E36 BMW 323is 328i 328is 

    Z3 BMW 1.9 2.3i 2.5i 2.8 3.0i

    Z4 BMW 2.5i 3.0i

    Show More Show Less
    JB Racing - Corporate Logo
    T#:3769
    Part#: 520-040-215
    Back Ordered
    11% off MSRP $ 765.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 679.00 USD
    Free Shipping
    11% off MSRP
    $ 765.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 679.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    Stock Flywheel Weight = 27.0lbs
    JB Flywheel Weight = 9.0lbs

    This item fits the following BMWs:
    1989-1992 E30 BMW 318i 318is 318ic
    1992-1997 E36 BMW 318i 318is 318ti 318ic
    1996-1997 Z3 BMW Z3 1.9
    Show More Show Less

    JB Racing - Corporate Logo
    T#:2801
    Part#: 520-200-240
    In Stock
    $ 714.00 USD
    Free Shipping
    $ 714.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

    Stock Flywheel Weight = 24-31.0lbs
    JB Flywheel Weight = 12.0lbs

    This item fits the following BMWs:
    2006-2010 E60 BMW - 525i, 528i, 530i
    2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
    2007-2013 E82 BMW - 125i, 128i
    2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
    2009-later E89 BMW - Z4 3.0i
    Show More Show Less

    JB Racing - Corporate Logo
    T#:302739
    Part#: 520-180-240
    Ships in 8 Business Days
    $ 602.00 USD
    Free Shipping
    $ 602.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

    Stock Flywheel Weight = 25.0lbs
    JB Flywheel Weight = 10.0lbs

    This item fits the following BMWs:
    2001-2006  E46 BMW  M3 (6-speed manual only, not for SMG)
    Show More Show Less
    GSP North America - Corporate Logo
    T#:22591964
    Part#: NCV27005
    In Stock
    $ 151.99 USD
    Free Shipping on orders $49 and up

    Choose GSP for Your Hub Assembly, Axle Shaft, and Loaded Strut Needs

    Since 2004, GSP has been a trailblazer in the North American axle industry. With an extensive range of applications, a wide SKU count, and a track record of introducing the latest applications ahead of the competition, GSP is the go-to choice. In 2010, GSP expanded into hub assemblies and swiftly earned the trust of the industry, becoming the most reliable brand.

    When it comes to your hub assembly, axle shaft, and loaded strut needs, you can have full confidence in GSP's expertise.

    Key Features:

    • Superior quality based on long term development through ISO/TS16949 certifications
    • The strictest quality control standards to ensure the best end result to the customer
    • Constructed of high-quality materials for a superior product at a low price
    • Designed for application-specific needs
    • Consistently driving to offer the broadest catalog
    Show More Show Less
    JB Racing - Corporate Logo
    T#:4227
    Part#: 520-140-240
    In Stock
    $ 602.00 USD
    Free Shipping
    $ 602.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

    Stock Flywheel Weight = 25.0lbs
    JB Flywheel Weight = 10.0lbs

    This item fits the following BMWs:
    1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
    2001-2005 E46 BMW 325xi 330xi
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    Show More Show Less


    GSP North America - Corporate Logo
    T#:27238721
    Part#: NCV27044
    In Stock
    $ 144.99 USD
    Free Shipping on orders $49 and up
    GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional
    Show More Show Less
    JB Racing - Corporate Logo
    T#:3474
    Part#: 520-190-240
    Ships in 4 Business Days
    $ 672.00 USD
    Free Shipping
    $ 672.00 USD
    Free Shipping
    This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

    Stock Flywheel Weight = 25.0lbs
    JB Flywheel Weight = 10.5lbs

    This item fits the following BMWs:
    2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)
    Show More Show Less
    JB Racing - Corporate Logo
    T#:385699
    Part#: 520-060-228
    Ships on Sep 1, 2026
    $ 581.00 USD
    Free Shipping
    $ 581.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

    Stock Flywheel Weight = 18.0lbs
    JB Flywheel Weight = 8.0lbs

    This item fits the following BMWs:
    1984-1991  E30 BMW  325i 325ic 325is (with single-mass flywheel)
    1989-1990  E34 BMW  525i (with single-mass flywheel)
    Show More Show Less

    Clutch Slave Cylinder
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:14353727
    Part#: 21526795713
    In Stock
    $ 82.99 USD
    Free Shipping on orders $49 and up

    JB Racing - Corporate Logo
    T#:3772
    Part#: 520-090-240
    Ships in 7 Business Days
    $ 581.00 USD
    Free Shipping
    $ 581.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

    Stock Flywheel Weight = 16.0lbs
    JB Flywheel Weight = 8.0lbs

    This item fits the following BMWs:
    1991-1995 E34 BMW M5
    Show More Show Less
    JB Racing - Corporate Logo
    T#:3647
    Part#: 520-110-215
    Ships in 2 Business Days
    $ 581.00 USD
    Free Shipping
    $ 581.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    Stock Flywheel Weight = 16.5lbs
    JB Flywheel Weight = 8lbs

    This item fits the following BMWs:
    1974-1976 2002 BMW 2002
    1977-1983 E21 BMW 320i
    1984-1985 E30 BMW 318i
    Show More Show Less

    JB Racing - Corporate Logo
    T#:3768
    Part#: 520-050-228
    Ships in 4 Business Days
    $ 630.00 USD
    Free Shipping
    $ 630.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    The JB flywheel includes ignition trigger wheel.

    Stock Flywheel Weight = 19.5lbs
    JB Flywheel Weight = 8.0lbs

    This item fits the following BMWs:
    1987-1991 E30 BMW M3
    Show More Show Less
    Goodridge - Corporate Logo
    T#:26471480
    Part#: 31003-CLU
    In Stock at Vendor
    $ 31.99 USD
    Free Shipping on orders $49 and up

    Enhance your driving experience with Goodridge's stainless steel braided replacement hose

    Designed to provide superior pedal feel and durability. Say goodbye to mushy and inconsistent pedal feel caused by traditional rubber hoses. Here's why you need this upgrade:

    • Firm and consistent pedal feel
    • Resistant to pressure-induced expansion
    • Direct connection to your vehicle's clutch hydraulic system
    • Guaranteed quality and fitment from a trusted aftermarket brand
    • Durability tested to prevent sudden failure

    Upgrade your clutch hydraulic system today with Goodridge's stainless clutch line.

    Show More Show Less

    Clutch Kit - SMG Transmission
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:374524
    Part#: 21212283089
    Ships in 1-2 days
    $ 989.99 USD
    Free Shipping
    $ 989.99 USD
    Free Shipping
    Clutch kit contains a clutch friction disc, pressure plate, and release (throw out) bearing. Inspect your flywheel for wear and damage prior to reinstallation. High mileage flywheels warrant replacement due to possibly of failure in dual-mass components. For vehicles with SMG transmission only.
    Show More Show Less

    DKM - Corporate Logo
    T#:17970622
    Part#: MB-006-005
    In Stock
    $ 999.99 USD
    $ 999.99 USD
    Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and a longer clutch life. For aggressive street use and moderate track use, the MB Clutch Kit is a performance clutch kit that upgrades you to a single Single Mass Flywheel and provides up to 80% increase in torque capacity over the MA series clutch kits. Allowing for quicker revs, this Kit will give your car a little pep while retaining factory-like pedal feel. Kit Contents: Pressure Plate Sprung Organic Disc Iron Single Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool For vehicles with 5-speed transmission only. Select your vehicle for additional fitment information. **Due to the nature of lightened single-mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
    Show More Show Less
    JB Racing - Corporate Logo
    T#:1339
    Part#: 520-150-240
    In Stock
    $ 903.00 USD
    Free Shipping
    $ 903.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    Stock Flywheel Weight = 33.0lbs
    JB Flywheel Weight = 13.0lbs

    This item fits the following BMWs:
    1997-2003 E39 BMW 540i
    Show More Show Less
    ACT - Corporate Logo
    T#:29002055
    Part#: 601170
    In Stock at Vendor
    $ 830.00 USD
    Free Shipping on orders $49 and up

    The ACT Streetlite flywheel offers the following benefits:

    Noticeably improved engine response and acceleration: Experience a significant boost in engine performance and acceleration with this component. OE to mild gear rattle: Expect only minimal gear rattle, from Original Equipment (OE) standards to a mild level, ensuring a smoother drive. Heat-treated forging for strength and toughness: Crafted using heat-treated forging, this part guarantees enhanced strength and durability. Induction-hardened ring gears for maximum life: The ring gears undergo induction hardening, providing maximum lifespan and reliability. One-piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc: The one-piece design reduces potential failure points and ensures uniform and efficient heat transfer from the clutch disc, preventing issues like warped inserts or loose ring gears. Recommended for street and race use: This component is ideal for both everyday street driving and competitive racing environments.

    Forged, CNC machined, and dynamically computer balanced for smooth high RPM reliability: Expertly forged, CNC machined, and dynamically balanced via computer to ensure smooth and reliable performance at high RPMs.

    Show More Show Less


    BMW N52 3.0L Dual Mass Flywheel
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:14386743
    Part#: 21207573785
    Ships in 2 Business Days
    $ 709.99 USD
    Free Shipping on orders $49 and up

    BMW N52 3.0L Dual Mass Flywheel

    Optimize your BMW's performance with the BMW N52 3.0L Dual Mass Flywheel. This dual mass flywheel is engineered to meet the highest standards of quality and reliability, ensuring smooth and efficient power transmission for your BMW.

    • Genuine BMW part guarantees compatibility and performance
    • Designed specifically for BMW N52 3.0L engines
    • Reduces engine vibrations for smoother operation
    • Improves clutch engagement and drivability
    • Durable construction for long-lasting durability
    Show More Show Less
    GSP North America - Corporate Logo
    T#:389683
    Part#: 274125
    Ships in 2 Business Days
    $ 72.99 USD
    Free Shipping on orders $49 and up

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible 
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 
    3/1991-1995 E34 BMW 525i 530i 535i 540i 
    11/1991-1994 E32 BMW 735i 735il 740o 740il 750il 
    3/1992-1999 E31 BMW 840ci 850ci 850csi 
    1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

    Show More Show Less
    GSP North America - Corporate Logo
    T#:389675
    Part#: 274210
    Ships in 2 Business Days
    $ 105.99 USD
    Free Shipping
    $ 105.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E39 BMW 525i 528i 530i 

    E60 BMW 525i 525xi 528i 528i xDrive 530i 530xi 535i 535xi 545i 550i 

    E63 BMW 645Ci 650i

    Show More Show Less

    GSP North America - Corporate Logo
    T#:389682
    Part#: 274094
    Ships in 2 Business Days
    $ 62.99 USD
    Free Shipping on orders $49 and up

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E30 BMW M3

    E28 BMW 524td 528e 533i 535i 535is M5

    E24 BMW 633CSi 635CSi M6

    Show More Show Less

    GSP North America - Corporate Logo
    T#:1196237
    Part#: 270010
    Ships in 2 Business Days
    $ 115.99 USD
    Free Shipping
    $ 115.99 USD
    Free Shipping
    Replace your worn wheel hub assembly with this assembly
    Clutch Kit - E36 328i / 328is, E39 528i 1997, Z3 2.8 97-98
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:4185
    Part#: 21211223602
    In Stock at Vendor
    $ 364.99

    This product was last offered at the strikethrough price on
    03-05-2026

    $ 333.99 USD
    Free Shipping
    $ 333.99 USD
    Free Shipping
    This OEM Sachs clutch kit includes the clutch disc, pressure plate and throw out bearing.

    This item fits the following BMWs:
    1992-1998 E36 BMW 328i 328is 328ic
    1997 E39 BMW 528i
    1997-1998 Z3 BMW Z3 2.8
    Show More Show Less

    GSP North America - Corporate Logo
    T#:389692
    Part#: NCV27528
    Ships in 2 Business Days
    $ 156.99 USD
    Free Shipping
    $ 156.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E32 BMW 735i 735iL 740i 740iL

    Show More Show Less

    GSP North America - Corporate Logo
    T#:389707
    Part#: NCV27504
    Ships in 2 Business Days
    $ 180.99 USD
    Free Shipping
    $ 180.99 USD
    Free Shipping

    Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

     

    This item fits the following BMWs: 

    E39 BMW 540i M5

    Show More Show Less

    JB Racing - Corporate Logo
    T#:3770
    Part#: 520-080-240
    Ships in 8 Business Days
    $ 630.00 USD
    Free Shipping
    $ 630.00 USD
    Free Shipping
    Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

    Stock Flywheel Weight = 22.0lbs
    JB Flywheel Weight = 8.5lbs

    This flywheel includes the ignition trigger wheel.

    This item fits the following BMWs:
    1982-1987 E23 BMW 733i 735i
    1982-1989 E24 BMW 633csi 635csi M6
    1985-1988 E28 BMW 535i 535is M5
    Show More Show Less
    Sachs Clutch Kit - E36 M3 95
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:3777
    Part#: 21212227536
    In Stock at Vendor
    $ 573.80

    This product was last offered at the strikethrough price on
    04-09-2026

    $ 511.23 USD
    Free Shipping
    $ 511.23 USD
    Free Shipping
    The best clutch that we have found for your 1995 M3 is the same as what's in your car. Manufactured in Germany and includes a clutch disc, pressure plate, and throw-out bearing.

    Optional items:
    Exhaust Gaskets & Hardware:
  • 18301716888 - exhaust gasket x 2
  • 18301737774 - nuts x 6
    Transmission Seals:
  • 23121282394 - shift shaft seal
  • 23111224799 - output seal
  • 23211224820 - input seal
    Additional Clutch Parts:
  • 21511223328 - clutch pivot pin
  • 11211720310 - pilot bearing
  • 07119906045 - pressure plate bolts x 6

    This item fits the following BMWs:
    1995 E36 BMW M3 with S50 engine
  • Show More Show Less
    ACT - Corporate Logo
    T#:567303
    Part#: 601010
    In Stock at Vendor
    $ 748.00 USD
    Free Shipping
    $ 748.00 USD
    Free Shipping
    This Streetlite flywheel is considerably lighter than stock and is the most durable flywheel offering from ACT. This is preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts. Noticeably improved engine response and acceleration, OE to mild gear rattle LifeHeat-treated forging for strength and toughness, induction-hardened ring gears for maximum life One-piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears CNC machined and dynamically computer balanced for smooth high RPM reliability
    Show More Show Less


    ACT - Corporate Logo
    T#:567293
    Part#: BM9-XTSS
    In Stock at Vendor
    $ 949.00 USD
    Free Shipping
    $ 949.00 USD
    Free Shipping
    ### **BM9-XTSS Clutch Kit – Engineered for Peak Performance** The **BM9-XTSS Clutch Kit** is designed for enthusiasts who demand maximum performance and durability. Featuring an **ACT Xtreme pressure plate**, this kit delivers **higher clamp load, reduced deflection, and extended clutch life**—ideal for spirited street driving and track use. Each diaphragm undergoes a **four-stage heat-treatment process**, ensuring superior strength and longevity. **Precision cover stampings** enhance rigidity, providing a significant upgrade over stock components. Paired with **ACT’s Performance Street Disc**, this kit utilizes **steel-backed organic friction material** with **high copper content** for **better heat dissipation and burst strength**. Its **reduced marcel design** allows for **quicker, smoother shifts**, perfectly complementing the Xtreme pressure plate. Expect **quiet operation, enhanced durability, and long-term reliability**, making it a top choice for performance-driven drivers. ### **Key Features:** - **Pedal Feel:** Moderate to heavy effort, smooth engagement, and minimal gear rattle. - **Extended Lifespan:** ACT’s exclusive diaphragm design ensures longer-lasting friction material. - **Precision Engineering:** Optimized for **heat resistance, fade reduction, and maximum durability**. Upgrade your drivetrain with confidence—the **ACT BM9-XTSS Clutch Kit** is built to handle the pressure. 🚗💨
    Show More Show Less
    OEM Sachs Clutch Kit - E30 M3
    2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
    Sachs - Corporate Logo
    T#:3853
    Part#: 21202226141
    Ships in 5 Business Days
    $ 627.01

    This product was last offered at the strikethrough price on
    08-13-2026

    $ 462.99 USD
    Free Shipping
    $ 462.99 USD
    Free Shipping
    If you are doing a clutch job on an E30 M3, and want to use the stock parts, this is the kit you need. The kit includes clutch Disc, pressure plate, and throw-out bearing. SACHS is the OEM supplier for BMW.This kit fits all 1988-1991 M3 (E30).
    Show More Show Less