The Powerflex Black Series Shifter Arm Rear Bushing for BMW 3 Series, 5 Series, and Z Series is a high-performance upgrade, engineered for those seeking superior precision and durability in their vehicle’s shifting mechanism. Part of the Powerflex Black Series, this bushing is designed specifically for track and high-performance use, delivering exceptional stability under extreme conditions.
This rear shifter arm bushing upgrade is perfect for drivers who want the best in control, performance, and long-term durability, making it an essential component for serious driving and racing applications.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2001 - 2006 E46 M3
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex BMW Shifter Carrier Arm Bushings - Oval (Pack of 2) are a premium upgrade for BMW enthusiasts seeking enhanced precision and reliability in their gear shifts. These bushings replace the OEM rubber bushings, which can degrade over time, leading to loose or vague shifting.
This set of two bushings is a perfect upgrade for drivers looking for crisper, more controlled shifting in their BMW, making it an essential component for both performance and c
The Powerflex Black Series Rear Diff Front Mount Insert for the BMW F22 (2 Series), F30 (3 Series), and F32 (4 Series) is a robust and high-performance bushing designed for motorsport and aggressive driving. It's part of Powerflex’s Black Series line, which prioritizes precision and control by using a stiffer polyurethane material to enhance the vehicle's dynamics.
Material and Hardness: Made from 95A durometer polyurethane, the Black Series is much firmer than standard bushings, designed specifically for track use. This stiff material drastically reduces unwanted movement in the differential mount.
Enhanced Driving Precision: By reducing flex in the front differential mount, this insert enhances throttle response, reduces wheel hop, and sharpens the overall feel of the drivetrain. This results in better power transfer and improved handling during aggressive acceleration, hard cornering, and rapid gear changes.
Durability: Unlike OEM rubber mounts, which can degrade over time due to exposure to heat, oil, and general wear and tear, Powerflex’s polyurethane inserts are built to withstand harsher conditions, offering greater longevity and reliability.
Simplified Installation: The insert is designed to fit into the existing OEM mount, making installation relatively straightforward without requiring complete replacement of the differential mount. This makes it an efficient and cost-effective performance upgrade.
Performance Trade-off: While the Black Series offers a significant performance boost, it can also slightly increase noise, vibration, and harshness (NVH) inside the cabin. This is a typical trade-off for stiffer, track-oriented mounts.
This insert is popular among BMW enthusiasts who want to upgrade their car’s handling for track days or spirited driving, making the rear-end of the car feel more planted and controlled.
For the BMW E60 (5 Series) and E63 (6 Series), upgrading to Powerflex rear differential rear bushings is an essential modification for enhancing the vehicle's performance, handling, and longevity. These bushings play a critical role in connecting the rear differential to the chassis, and their quality directly impacts the driving experience.
Premium Polyurethane Material: Powerflex bushings are crafted from high-grade polyurethane, offering superior durability and resistance to wear compared to stock rubber bushings. This material is less susceptible to degradation from heat, oil, and road grime, ensuring consistent performance over time.
Enhanced Differential Stability: Stiffer bushings help to reduce unwanted movement and flex in the rear differential, which is crucial for optimal power transfer to the rear wheels. This results in improved stability and better handling characteristics during acceleration and cornering.
Improved Handling Dynamics: By minimizing differential movement, Powerflex bushings maintain proper alignment and enhance the overall handling precision of the vehicle. This results in more responsive steering and improved cornering performance, providing a more engaging driving experience.
Reduced Noise, Vibration, and Harshness (NVH): While these bushings are firmer than the factory rubber components, they are designed to minimize NVH. This means you can enjoy improved performance without a significant increase in cabin noise or discomfort, making them suitable for both daily driving and spirited performance use.
Longevity and Reliability: Powerflex bushings are designed to withstand the rigors of performance driving without deteriorating over time. This durability translates to fewer replacements and reduced maintenance, making them a cost-effective upgrade in the long run.
Direct Fit Replacement: These bushings are engineered to directly replace the factory bushings without modification. This simplifies the installation process, though some technical knowledge and tools may be required to ensure proper fitment.
Professional Installation Recommended: Given the importance of the rear differential in the overall drivetrain, professional installation is advised. This ensures that the bushings are installed correctly and that the differential is properly aligned.
Performance Drivers: If you’re looking to enhance your BMW's handling and responsiveness, especially during spirited driving or track events, these bushings will provide a noticeable improvement in performance and stability.
Preventive Maintenance: Upgrading to Powerflex bushings is a proactive measure to ensure the longevity of your differential and related components. If you're noticing signs of wear or if your car is regularly subjected to high-performance conditions, these bushings are a worthwhile investment.
In conclusion, Powerflex rear differential rear bushings for the BMW E60 and E63 are a vital upgrade for enthusiasts seeking enhanced performance and durability. These bushings improve handling precision, increase stability, and contribute to a more engaging driving experience, making them an excellent choice for both everyday driving and high-performance applications.
4o
BMW Shifter Carrier Arm Bushings - Round are essential for enhancing shifting precision and feel in your BMW’s manual transmission. These 90A urethane bushings from Turner Motorsport replace the stock rubber bushings, which tend to wear out quickly, resulting in sloppy shifting. Designed to fit at the front of the shifter carrier arm, these bushings securely attach the carrier to the transmission, providing a stiffer connection that minimizes excessive play without increasing vibration. This upgrade is perfect for enthusiasts seeking a more responsive shifting experience.
These bushings are compatible with various BMW models, including the E30, E36, E46, E28, E34, E39, E24, and Z1 Roadster, and serve as a direct replacement for BMW part #25117519669. Installation is simple when the shifter carrier is removed from the vehicle.
This product was last offered at the strikethrough price on
06-01-2026
This product was last offered at the strikethrough price on
06-01-2026
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. *Door Buster Special - New Product*
MINI Gen 1 Gearbox Mount Bushing Insert - Race is designed to enhance engine and gearbox stability in MINI Gen 1 Cooper S and JCW models. This polyurethane insert replaces the factory voids, improving throttle response and gear changes by reducing engine and gearbox movement under acceleration and gear shifts.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex Rear Diff Front Mount Bushing (Race) for BMW E34 5 Series and E32 7 Series is a premium upgrade designed for enhanced drivetrain stability and performance. Here’s another description:
Race-Grade Polyurethane: Part of Powerflex’s Race Series, this bushing is crafted from a super-stiff polyurethane compound, designed to eliminate the excessive movement found in factory rubber bushings. The Race Series is optimized for track and high-performance driving, where minimizing flex is crucial for precision handling.
Purpose: This bushing replaces the front mount of the rear differential, a critical point where unwanted flex can reduce performance. By stiffening this mount, the bushing ensures improved power transfer to the wheels and reduces drivetrain slop, making the car feel more connected and responsive.
Key Features:
Benefits:
Fitment: Tailored specifically for the BMW E34 (5 Series) and E32 (7 Series) models, this bushing replaces the front differential mount and offers a perfect fit, ensuring no compromises on installation or function.
In summary, the Powerflex Rear Diff Front Mount Bushing (Race Series) is an essential upgrade for BMW E34 and E32 owners looking for improved drivetrain rigidity, better handling, and longer-lasting components. Perfect for performance enthusiasts and track-goers, it enhances rear suspension control and reduces drivetrain movement for sharper, more precise driving experiences.
Upgrade your Mini with the PFF5-220 Lower Torque Mount Bracket & Bushing, designed to replace the softer OE mount prone to cracking and excessive engine movement. Ideal for standard or mildly tuned cars, this mount bracket is 300% stiffer than the worn OE mount, offering improved handling and gear shifting precision for fast road use. With CNC machined aluminum construction and various durometer bushing options, it reduces engine movement while enhancing on/off throttle balance. Easy to install with just two bolts, it eliminates the need for pressing out rubber. Expect a slight increase in NVH, particularly at idle.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i
MINI F54 to F57 Race Polyurethane Engine Support Bushing - Large is designed to improve engine stability and performance by reducing engine movement. Unlike OEM rubber bushings that prioritize comfort, these Powerflex polyurethane bushings are firmer and more durable, ensuring optimal engine retention and reduced engine slop.
Powerflex, Europe's top-selling suspension bushing manufacturer, utilizes state-of-the-art techniques to produce these exact-fit, premium performance bushings. Built to last longer than OEM rubber bushings, they enhance performance and provide a more engaging driving experience.
The Powerflex Rear Diff Mount Bushing for the BMW E21 offers a robust solution to support and stabilize the differential, replacing the standard rubber bushings with durable polyurethane. This upgrade minimizes unwanted differential movement, enhancing driving dynamics and responsiveness.
These bushings are popular among E21 owners who want a durable, performance-oriented solution that balances comfort and handling precision. Ideal for both spirited driving and daily use.
The BMW F10/F07 Rear Diff Rear Mount Bushing by Powerflex is a specialized upgrade designed to replace the OEM rubber bushings in the rear differential mount. Here's a breakdown of its key features and benefits:
Durability and Longevity: Made from high-quality polyurethane, these bushings are significantly more resistant to wear compared to the stock rubber, which tends to degrade over time due to heat, oils, and mechanical stress.
Enhanced Performance: The stiffer material reduces flex in the rear differential, ensuring more precise power transfer to the wheels. This results in better acceleration response, reduced wheel hop, and improved handling characteristics, especially during aggressive driving.
Reduced Differential Movement: The stock bushings can allow excessive differential movement under load, leading to a less stable rear end. The Powerflex bushings minimize this movement, enhancing the overall driving dynamics.
Balanced Comfort and Performance: While polyurethane bushings are firmer than rubber, Powerflex designs their bushings to maintain a balance between performance and comfort. This means less increase in vibration, noise, and harshness (NVH) compared to other aftermarket bushings, making them suitable for both daily driving and performance applications.
Custom Fit for BMW F10/F07: Specifically engineered for the BMW 5 Series (F10) and BMW 5 Series GT (F07), these bushings offer a precise fit, ensuring easy installation and compatibility with factory components.
Overall, the Powerflex Rear Diff Rear Mount Bushing is a go-to upgrade for those looking to improve their BMW’s rear-end stability, responsiveness, and durability without sacrificing too much comfort.
