The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.

Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.

The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.

Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.

Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.

Need replacement or additional bushings? See T#4799658 for replacement street bushings.

Don't neglect your motor mounts! Most stock BMW motor mounts are fluid filled and the stiffness of the mount depends on this fluid. But over time the fluid leaks out and the strength of the mount is greatly reduced. A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. As the engine is moving around it can contact other parts in the engine bay - usually cooling related. The mechanical fan can hit the radiator; the A/C compressor can hit a radiator hose, the exhaust will flex and may break. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

This mount is for the right/passenger's side.

This is a direct replacement for the factory motor mount for M62 V8 engines and M73N V12 engines. Manufactured by OE supplier Lemfoerder.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1997-2001 E38 BMW 740i 740il
1999-2001 E38 BMW 750il

This is the direct replacement wheel bearing and hub assembly to fit the front of the E39 Non-M. We sell the OE and OEM bearings so you get the highest quality part available. This is the hub with the bearing and it bolts to the carrier (new hardware is recommended). 

Replace your wheel bearings when you hear groaning or rumbling sounds from the front. These sounds increase in frequency as speed increases and will get louder as you turn the wheel (and put load on the worn side). Failing wheel bearings can also attribute to annoying 'pad knockback' on the track. 

Sold per bearing/hub. 

Fits the following BMW's:
1998 - 2004 E39 Touring 525i 528i 540i
1996 - 2004 E39 Sedan 525i 528i 530i 540i

Valeo Dual Mass Flywheel Conversion Kit for MINI Cooper S/JCW

Elevate your MINI's performance with the Valeo dual mass flywheel conversion kit. This comprehensive kit includes a solid flywheel, pressure plate, clutch disc, throw-out bearing, and more. Notably, it replaces the OE dual mass flywheel for enhanced performance.

If you're missing any hardware, don't worry. Valeo ensures your satisfaction by replacing missing items with your order number. They are also working on an improved box design to prevent damage during shipping.

Designed for the R53/R52 Cooper S/JCW with W11 engines (Supercharged Engines), this kit is not compatible with Gen 2 MINIs (R56) with N14/N18+ Turbo Engines. For an exclusive ECS Tuning kit with extra seals, explore ES3469345.

Upgrade to the single mass setup for cost-efficiency, serviceability, simplicity, and enhanced driveability. Valeo's conversion kit maintains clutch and flywheel weight for quiet and easy driving.

This kit includes a replacement flywheel, clutch disc, pressure plate, release bearing, and more. Please note that a lightened single mass flywheel may result in some "NVH" or "chatter" during operation, which can be influenced by accompanying modifications.

For complete install kits, discover ES3469345 and ES4067131, exclusively at ECS Tuning.

Installation Details:

• Flywheel bolts (M10x19.5): Tightening torque 90 Nm, Thread lock red.
• Pressure plate (M7x26): Tightening torque 20 Nm.

Motor mounts can fail over time, leading to excessive vibration being transferred to the body and engine movement. OEM Lemförder motor mounts are the perfect replacement to prevent vibrations and knocks from continuing.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!