Replace this tube whenever the bearing or clutch kit is replaced.

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

ARP Flywheel Bolts are a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best bolts we've found and we highly recommend them in any and all applications. 

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMW Engines: 
M20 2.5L

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

If your clutch switch is bad, it will prevent the car from starting and seem similar to a bad starter, you will turn the key and nothing will happen. Replace yours to start your vehicle again.

Genuine BMW Module, Clutch Switch
This item fits the following BMW Chassis:
E39 M5,E46 M3,E85 Z4M,E39,E46,E85 Z4,E86 Z4
 

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version. 

• FX100 (Stage I)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Sprung hub/cushioned disc

• Steel-backed organic friction material

BMW E46 E39 Z3 Z4 Lightweight Steel Flywheel is an exceptional performance upgrade designed to enhance your driving experience by providing quicker revs and reducing turbo lag. Engineered by Turner Motorsport, this flywheel is constructed from high-quality 6061-T6 billet aluminum with a high-carbon steel replaceable friction surface, ensuring durability and improved acceleration.

• Increased Acceleration: Reduced mass results in quicker engine revs and enhanced acceleration.
• High-Quality Materials: Made from 6061-T6 aircraft-grade billet aluminum for exceptional strength and performance.
• Durable Construction: Features a high-carbon steel replaceable friction surface and an OE steel ring gear secured by bolts.
• Lifetime Warranty: Comes with a limited lifetime warranty, underscoring its reliability and long-term performance.
• SFI Certification: Meets SFI Spec 1.1 or 1.2 standards, ensuring high-quality construction and safety.

This lightweight flywheel fits the following BMW models:

• 1999-2002 E46 BMW 323i, 323ci, 325i, 325ci, 328i, 328ci, 330i, 330ci (with 5-speed manual transmission)
• 2001-2005 E46 BMW 325xi, 330xi
• 1997-2002 Z3 BMW Z3 2.3, Z3 2.5i, Z3 2.8, Z3 3.0i

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

• Reduced mass equals increased acceleration
• CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
• CM uses an OE steel ring gear secured by bolts
• CM offers a limited lifetime warranty
• CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission 

BMW E39 540i Stage 2 Clutch Kit is designed to enhance the performance and reliability of your BMW's clutch system. Ideal for enthusiasts looking to upgrade from the stock setup, this Stage 2 clutch kit delivers superior holding power and durability.

• Increased Holding Capacity: Provides 70% more holding power compared to stock, accommodating higher torque and demanding driving conditions.
• Heavy-Duty Construction: Features a reinforced pressure plate for added strength and longevity.
• Enhanced Durability: Includes a sprung organic/fiber tough disc, ensuring long-lasting performance and smooth engagement.
• Complete Kit: Comes with all necessary components, including a pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, alignment tool, and pressure plate bolts.
• Flywheel Compatibility: Designed to work with a single mass flywheel (flywheel not included).

Turner Motorsport recommends the BMW E39 540i Stage 2 Clutch Kit for those seeking improved clutch performance and durability.

Upgrade Your Clutch with the Performance Clutch Installation Kit

Elevate your vehicle's clutch performance with the all-inclusive Performance Clutch Installation Kit, tailor-made for a stage one clutch upgrade. This kit incorporates a sturdy steel flywheel and Clutch Masters' FX100 (Stage I) components.

• High-Performance Street System
• 70% Increased Holding Capacity Over Stock
• Heavy-Duty Reinforced Pressure Plate
• Hi-Leverage™ Pressure Ring Design
• Sprung Hub/Cushioned Disc
• Steel Backed Organic Friction Material

Experience improved clutch performance with the FX100, known for its robust design and enhanced holding capacity. This kit is perfect for street applications, providing reliable clutch performance. Included in the package are the Pressure Plate, Clutch Disc, Throw-out Bearing (if applicable), Pilot Bearing or Bushing (if applicable), and an Alignment Tool.

ARP Flywheel Bolts are a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best bolts we've found and we highly recommend them in any and all applications. 

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMW Engines: 
S14 2.3L

Genuine BMW electric motor that powers the SMG Pump.

Genuine BMW Set Of Electric Motors
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63