Team MFactory Chromoly-Nitride Racing Flywheel - 21lb - N54 8 Bolt ...

T#:583625

Part#: MF-TRS-09E92

In Stock

$ 489.95 USD

Add to Wish List

Qty

$ 489.95 USD

Add to Wish List

Achieve increased throttle response and acceleration with the MFactory range of single-piece Lightweight Flywheels!

Diamond Cut to exacting tolerances from Forged Chromium-Molybdenum Steel
Perfect fitment & finish ensures hassle-free installation

Designed using leading-edge Solidworks 3D CAD & Cosmos FEA software
Advanced Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors!

Precision Balanced to over 12000rpm
Ensures the utmost reliability from our Lightweight Flywheels, which are specifically designed to reduce weight and inertia for improved engine response and acceleration

Specifications

Made from imported Japanese SAE 4140 Steel
Forged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness
Proprietary Nitride surface treatment for increased surface hardness

Show More Show Less

Chromoly-Nitride Racing Flywheel - Team MFactory

T#:2914103

Part#: MF-TRS-09E92A

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

21LB steel single mass flywheel

Chromoly-Nitride Racing Flywheel - 8 Bolt E82 / E92

T#:9545201

Part#: MF-TRS-09E92DCT

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

BMW Lightweight Flywheels

Crafted with precision from Forged Chromium-Molybdenum Steel
Perfect fitment and finish for hassle-free installation
Utilizes leading-edge Solidworks 3D CAD and Cosmos FEA software for design
Advanced geometry minimizes drivetrain losses, offering 1-2% more power to the ground
Precision balanced to exceed 12,000rpm for utmost reliability
Made from imported Japanese SAE 4140 Steel
Forged, double-tempered, and super sub-zero treated for unsurpassed toughness
Proprietary Nitride surface treatment enhances surface hardness

Show More Show Less

E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel

T#:3771

Part#: 520-010-240

Ships in 10 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Team MFactory Chromoly-Nitride Racing Flywheel - 6-Bolt

For vehicles with DTC transmission only

T#:12118971

Part#: MF-TRS-09E92ADCT

In Stock

$ 515.99 USD

Add to Wish List

Qty

$ 515.99 USD

Add to Wish List

Achieve increased throttle response and acceleration with the MFactory range of single-piece Lightweight Flywheels Diamond Cut to exacting tolerances from Forged Chromium-Molybdenum Steel Perfect fitment & finish ensures hassle-free installation Designed using leading-edge Solidworks 3D CAD & Cosmos FEA software Advanced Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over competitors! Precision Balanced to over 12000rpm Ensures the utmost reliability from our Lightweight Flywheels, which are specifically designed to reduce weight and inertia for improved engine response and acceleration Specifications Made from imported Japanese SAE 4140 Steel Forged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness Proprietary Nitride surface treatment for increased surface hardness

Show More Show Less

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

T#:3769

Part#: 520-040-215

Back Ordered

11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Qty

11% off MSRP

$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9

Show More Show Less

Clutch Masters Clutch Pedal Bushing And Pin Kit - G8X M2/M3/M4 & MK5 ...

T#:22328087

Part#: CM-340-CPBK

Ships in 7 Business Days

$ 107.99 USD

Add to Wish List

Qty

$ 107.99 USD

Add to Wish List

This clutch pedal bushing kit for the BWW G80 M3, G82 M4, G87 M2, and the MK5 Toyota Supra replaces all of the factory plastic bushings that wear out, warp, and are just an overall sloppy and poor design, with the highest quality CNC machined billet pieces. Clutch Masters' kit includes two stainless steel bushings that replace the factory plastic bushings for the clutch pedal pivot point as well as a stainless steel clutch pedal pin that replaces the factory plastic pin. Also included in the kit are two billet aluminum pins that replace the factory plastic pins that hold the clutch master cylinder in place. Clutch Masters did a thorough article on the benefits of this kit and why you might be running into troubles with your factory setup that you can read here: https://clutchmasters.com/n-44-bmw-g80-m3-g82-m4-g87-m2-mk5-toyota-supra-6-speed-manual-clutch.html

Show More Show Less

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

E46 M3 6MT JB Racing Lightweight Aluminum Flywheel

T#:302739

Part#: 520-180-240

Ships in 9 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
2001-2006 E46 BMW M3 (6-speed manual only, not for SMG)

Show More Show Less

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:211063

Part#: SB533H-2

In Stock

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

Tuning your N54/N55 with all of the bolt-on upgrades? Don't allow your clutch or flywheel let you down! The stock clutch is fine for a stock car or just a simple software upgrade. But anything more and it quickly becomes the weak link (especially with drag races or hard launches). The 135i/335i/535i/Z4 35i SPEC Stage 2+ clutch kit is perfect for owners who want a performance clutch that works great with simple bolt-on modifications and will have a minimum of downsides or trade-offs. SPEC has spent considerable time and effort on the 335i models to produce a performance clutch and flywheel package that holds up to track and drag strip demands but is also easy to live with for daily driving. This clutch kit is meant to be used only with a SPEC flywheel. Features: The flywheel has a peak torque rating of 545ft-lbs Limitations of the stock flywheel are eliminated Self-adjusting, like the factory design, and the engagement point can be adjusted Sprung hub clutch to be used with the single-mass flywheel with near-stock levels of noise, vibration, and refinement **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

SPEC Clutches Twin disc SS-Trim Clutch Kit - E60 M5, E63 E64 M6 SMG ...

T#:341298

Part#: SB60SST

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

When adding performance-enhancing modifications to your vehicle, you need a way to get the power to the wheels. The SPEC clutch kit is perfect for preventing premature wear and slippage during heavy acceleration. This kit is designed to hold up to 710 ft. lbs. For vehicles with SMG transmission only

Show More Show Less

SPEC Clutch Super Twin Performance Clutch Kit - w/ Organic Trim - BMW...

T#:3457425

Part#: SB55SST

Back Ordered

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

SPEC Super Twin multi-disc clutch and flywheel kits are designed for street and track use in vehicles with extreme horsepower and torque (700 to 1500 lbs.-ft.). They offer near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation, and maintenance-free operation. With their all-billet construction, these assemblies are smooth and quiet. Super Twins are constructed with aircraft-grade aluminum and high-carbon billet steel milled to industry-leading .001 in. tolerances for perfect balance and actuation. Friction is provided by dampened, full-faced, carbon-graphite discs. Additional features of SPEC Super Twin multi-disc clutch and flywheel kits: Organic, fiber, and full-metallic versions are also available Flywheel and track-spec hardware are included in each kit *Rebuildable by SPEC or the end-user *Ideal for all types of use, including: street, drag racing, drifting, road racing, time-attack, pulling, and rally

Show More Show Less

E46 323/325/328/330 5-speed, Z3 2.3/2.8/3.0 JB Racing Lightweight Alu...

T#:4227

Part#: 520-140-240

In Stock

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

F-Chassis B58 SPEC Billet Aluminum Flywheel

T#:7036582

Part#: SBB58A-2

In Stock

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

SPEC Billet Aluminum Single Mass Flywheel - E9X 335i, E82/88 135i, E6...

T#:387322

Part#: SB53A-2

In Stock

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration.

BMW E46 E39 Z3 Z4 Lightweight steel flywheel

T#:559369

Part#: FW-219-SF

In Stock

$ 566.99 USD

Add to Wish List

Qty

$ 566.99 USD

Add to Wish List

BMW E46 E39 Z3 Z4 Lightweight Steel Flywheel is an exceptional performance upgrade designed to enhance your driving experience by providing quicker revs and reducing turbo lag. Engineered by Turner Motorsport, this flywheel is constructed from high-quality 6061-T6 billet aluminum with a high-carbon steel replaceable friction surface, ensuring durability and improved acceleration.

Increased Acceleration: Reduced mass results in quicker engine revs and enhanced acceleration.
High-Quality Materials: Made from 6061-T6 aircraft-grade billet aluminum for exceptional strength and performance.
Durable Construction: Features a high-carbon steel replaceable friction surface and an OE steel ring gear secured by bolts.
Lifetime Warranty: Comes with a limited lifetime warranty, underscoring its reliability and long-term performance.
SFI Certification: Meets SFI Spec 1.1 or 1.2 standards, ensuring high-quality construction and safety.

This lightweight flywheel fits the following BMW models:

1999-2002 E46 BMW 323i, 323ci, 325i, 325ci, 328i, 328ci, 330i, 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi, 330xi
1997-2002 Z3 BMW Z3 2.3, Z3 2.5i, Z3 2.8, Z3 3.0i

Show More Show Less

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

T#:597416

Part#: SB55S-2

Back Ordered

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Clutch Masters Stage 1 Clutch Kit - FX100

For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)

T#:567239

Part#: 03005-HD00-D

In Stock

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed organic friction material

Show More Show Less

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:397226

Part#: SB531-2

Ships in 4 Business Days

10% off MSRP $ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

T#:567160

Part#: FW-CM3-AL

Ships in 3 Business Days

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

Reduced mass equals increased acceleration
CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
CM uses an OE steel ring gear secured by bolts
CM offers a limited lifetime warranty
CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission

Show More Show Less

Spec 12-16 BMW 335i (F30) Stage 2+ Clutch Kit

T#:597413

Part#: SB553H-2

In Stock at Vendor

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

2002, E21 320i, E30 318i (M10) JB Racing Lightweight Aluminum Flywhee...

T#:3647

Part#: 520-110-215

Ships in 3 Business Days

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i

Show More Show Less

SPEC Stage 2+ Performance Clutch Kit - E46 M3 6MT

T#:340444

Part#: SB663H

Ships in 3 Business Days

Starting at $ 869.00 USD

Add to Wish List

Starting at $ 869.00 USD

Add to Wish List

The SPEC Stage 2 clutch is a premium, no compromises heavy-duty clutch upgrade for the 2001-2006 E46 M3 (manual transmission). Where the stock clutch is well-known for premature wear when driven hard and the factory dual mass flywheel is a known failure point, the SPEC clutch delivers with an over-engineered, performance-oriented clutch solution. The single carbon-Kevlar clutch is rated at 545 ft-lbs, more than enough for the naturally-aspirated S54 engines. A heavy-duty pressure plate and throw-out bearing complete the package.

The stock clutch in the S54 cars is not a terrible clutch and it is not under-rated (it's the same clutch disc used in the E39 M5). Our tuned M3 street and race cars have used the stock clutch with almost 400hp with only the occassional slip. But if the clutch is not grabbing like you want it to, or your tuning plans will include forced induction, a heavy-duty clutch is what will be needed. The SPEC Stage 2 clutch consists of a carbon-Kevlar friction material paired with a heavy-duty pressure plate. The clutch is stronger and grabs harder than the factory clutch. It has a much more robust feel and engagement. And with this specification the clutch will never be a weak point. The SPEC clutch is designed to work with the stock dual mass flywheel or the SPEC single-mass flywheel (steel or aluminum).

The real weak point in the driveline is in the flywheel. The stock dual-mass flywheel has rubber damper discs inside that will wear out over time. Heat and aggressive driving will accelerate their wear. Even if the clutch contact surface is not showing wear the inner rubber linings most likely are. On most clutch replacements we strongly advise getting a new flywheel at the same time to avoid duplicating the work. You can use the SPEC clutch with the stock or SPEC flywheel. Both the SPEC steel and aluminum flywheels are lighter than stock and will be single-mass. There will be a lot more noise and 'gearbox chatter' with the aluminum but the tradeoff is a much better acceleration and quicker revving. For daily driver commuting you will probably be happiest with the stock flywheel. For the ultimate in sports car feel use the aluminum. For the best of both worlds select the SPEC steel flywheel. It will not fail like the dual mass design but still has enough mass to dampen most engine vibrations.

SPEC Clutch is one of the premier clutch and flywheel suppliers to the tuner market. They are often found on the most highly tuned import and domestic vehicles. They are recent players in the German car community with a special focus on the newer turbo BMW models with high torque output. SPEC has been proven time after time to provide superior performance, drivability, and longevity to the most hardcare enthusiasts around the globe.

E46 M3 SPEC Clutch Kit contents:
+ carbon-Kevlar clutch disc
+ heavy-duty pressure plate
+ heavy duty billet throw-out bearing

This item fits the following BMWs:
2001-2006 E46 BMW M3 with 6 speed manual transmission

Show More Show Less

E30 M3 JB Racing Lightweight Aluminum Flywheel

T#:3768

Part#: 520-050-228

Ships in 5 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

Clutch Masters Stage 3+ FX350 Clutch And Flywheel Kit

T#:567274

Part#: 03CM2-HDFF-AK

Ships in 4 Business Days

$ 1,193.99 USD

Add to Wish List

Qty

$ 1,193.99 USD

Add to Wish List

The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style.

The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.

Show More Show Less

BMW N54 N55 B58 SPEC Stage 2 Performance Clutch Kit (for SPEC single-...

T#:341710

Part#: SB532-2

In Stock

$ 790.99 USD

Add to Wish List

Qty

$ 790.99 USD

Add to Wish List

SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.

Kit includes:

Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel

Show More Show Less

BMW E39 540i Stage 2 Clutch Kit - Clutch Masters

T#:568021

Part#: 03CM6-HD0F-X

In Stock

$ 733.99 USD

Add to Wish List

Qty

$ 733.99 USD

Add to Wish List

BMW E39 540i Stage 2 Clutch Kit is designed to enhance the performance and reliability of your BMW's clutch system. Ideal for enthusiasts looking to upgrade from the stock setup, this Stage 2 clutch kit delivers superior holding power and durability.

Increased Holding Capacity: Provides 70% more holding power compared to stock, accommodating higher torque and demanding driving conditions.
Heavy-Duty Construction: Features a reinforced pressure plate for added strength and longevity.
Enhanced Durability: Includes a sprung organic/fiber tough disc, ensuring long-lasting performance and smooth engagement.
Complete Kit: Comes with all necessary components, including a pressure plate, clutch disc, throw-out bearing, pilot bearing or bushing, alignment tool, and pressure plate bolts.
Flywheel Compatibility: Designed to work with a single mass flywheel (flywheel not included).

Turner Motorsport recommends the BMW E39 540i Stage 2 Clutch Kit for those seeking improved clutch performance and durability.

Show More Show Less

MINI Cooper S Clutch Kit - FX100 - Stage 1

T#:600127

Part#: 03635-HD00-SK

In Stock

9% off MSRP $ 1,485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,350.00 USD

Add to Wish List

Qty

9% off MSRP

$ 1,485.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,350.00 USD

Add to Wish List

Upgrade Your Clutch with the Performance Clutch Installation Kit

Elevate your vehicle's clutch performance with the all-inclusive Performance Clutch Installation Kit, tailor-made for a stage one clutch upgrade. This kit incorporates a sturdy steel flywheel and Clutch Masters' FX100 (Stage I) components.

High-Performance Street System
70% Increased Holding Capacity Over Stock
Heavy-Duty Reinforced Pressure Plate
Hi-Leverage™ Pressure Ring Design
Sprung Hub/Cushioned Disc
Steel Backed Organic Friction Material

Experience improved clutch performance with the FX100, known for its robust design and enhanced holding capacity. This kit is perfect for street applications, providing reliable clutch performance. Included in the package are the Pressure Plate, Clutch Disc, Throw-out Bearing (if applicable), Pilot Bearing or Bushing (if applicable), and an Alignment Tool.

Show More Show Less

BMW F8X M3 M4 Stage 1 Clutch Kit - FX100 - Organic

T#:21407060

Part#: 03795-HD00-R

Ships in 1-2 days

10% off MSRP $ 1,300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,175.00 USD

Add to Wish List

Qty

10% off MSRP

$ 1,300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,175.00 USD

Add to Wish List

Upgraded clutch plate with organic rigid disc designed to be used with OEM flywheel. 70% Increased Holding Capacity The FX100 System uses the Power Plus I Heavy-Duty Pressure Plate with a steel backed organic friction material disc. This clutch is engineered for street driven vehicles and is specifically designed for extended wear and additional clamping force for the enthusiast who has added minor bolt-ons such as an exhaust and or intake system, up to 50hp NO2, or other non-forced induction external bolt ons. It features only slightly increased pedal pressure over factory, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation. Heavy-Duty Disc Steel Backed Organic Friction Material Marcel Spring Wafer OEM or better Release Bearing Pilot Bearing (when applicable) Alignment Tool Instruction Card Decals *Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.

Show More Show Less

E39 540i 97-03 JB Racing Lightweight Aluminum Flywheel

T#:1339

Part#: 520-150-240

In Stock

$ 903.00 USD

Add to Wish List

Qty

$ 903.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 33.0lbs
JB Flywheel Weight = 13.0lbs

This item fits the following BMWs:
1997-2003 E39 BMW 540i

Show More Show Less

E24 633/635CSi/M6, E28 535i/M5 JB Racing Lightweight Aluminum Flywhee...

T#:3770

Part#: 520-080-240

Ships in 9 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 22.0lbs
JB Flywheel Weight = 8.5lbs

This flywheel includes the ignition trigger wheel.

This item fits the following BMWs:
1982-1987 E23 BMW 733i 735i
1982-1989 E24 BMW 633csi 635csi M6
1985-1988 E28 BMW 535i 535is M5

Show More Show Less

Stage 1 Clutch And Flywheel Kit E46 / E60 / E83

T#:583001

Part#: 03CM3-HD00-SK

Ships in 3 Business Days

9% off MSRP $ 1,212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,099.99 USD

Add to Wish List

Qty

9% off MSRP

$ 1,212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,099.99 USD

Add to Wish List

Enhance your vehicle's performance with the FX100 (Stage I) Performance Clutch Installation Kit, a comprehensive package perfect for a stage one clutch upgrade. This kit comprises all essentials, including a new single mass flywheel, and is designed with a dampened disc version for optimal functionality. Key features of the FX100 (Stage I) kit include:

High-performance street system for improved functionality
Increased holding capacity by 70% over stock for enhanced power transmission
Heavy-duty reinforced pressure plate for added durability
Hi-Leverage™ pressure ring design for optimal performance
Sprung hub/cushioned disc for smoother engagement
Steel-backed organic friction material for reliable grip
Single-mass steel flywheel, ensuring robustness and efficiency

Show More Show Less

Clutch Masters FX250 Stage 2 Clutch Kit

T#:567208

Part#: 03010-HD0F

Ships in 4 Business Days

$ 546.99 USD

Add to Wish List

Qty

$ 546.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel.

Show More Show Less

Stage 3+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:209171

Part#: SB533F-2

In Stock

$ 979.00 USD

Add to Wish List

Qty

$ 979.00 USD

Add to Wish List

The Stage 3+ is for cars making serious levels of boost and torque. If you have upgraded turbos or a single-turbo conversion, or have checked off the list of full bolt-ons, this will be a very capable clutch for you. This clutch is designed to work only with a SPEC single-mass flywheel and avoid the pitfalls of the stock OEM flywheel. The stock dual mass flywheel uses springs and rubber to isolate vibrations from the engine and transmission. However, on high mileage or abused flywheels the rubber can break down and the springs will become weak. A worn dual mass flywheel limits the amount of torque you can put out. It will affect clutch engagement, shifts, and power delivery. In some cases a total flywheel failure can rip apart the flywheel, clutch, and even transmission housing. With the SPEC single-mass flywheel the limitations of the stock flywheel are eliminated. The SPEC flywheel is a single mass design (no internal springs or rubber to fail) and is offered in a steel or aluminum material. The steel will better dampen vibration than the aluminum so it's the better choice for street use. The aluminum will have greater vibration and noise (gearbox rattle) that may not be acceptable for everyone. The clutch in this Stage 3+ kit is a sprung hub design so SPEC has done all they can to minimize the noise and vibration. It's also self-adjusting, like the factory design, and the engagement point can be adjusted. For use with SPEC Billet Flywheel (E-Chassis cars) or (F-Chassis cars)

Show More Show Less

Stage 1 Clutch Kit - FX100

T#:567161

Part#: 03CM3-HD00-X

Ships in 6 Business Days

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

FX100 (Stage I)
High performance street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Hi-Leverage™ pressure ring design
Sprung hub/cushioned disc
Steel-backed organic friction material

Fitment in following BMWs:This item fits the following BMWs:
2003-2005 E46 BMW 330i 330ci only for 6-speed manual transmission

Show More Show Less

Spec Aluminum Single Mass Flywheel - E9X 335 (01/2009+)

Designed for use with SPEC SB53X-2 clutch kits

T#:342330

Part#: SB53A-3

Back Ordered

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration.

Stage 2 Clutch Kit - FX250 - Fiber Tough/Organic

T#:21407061

Part#: 03795-HD0F-D

Back Ordered

$ 1,291.99 USD

Add to Wish List

Qty

$ 1,291.99 USD

Add to Wish List

Upgraded clutch plate with Fiber Tough/steel backed organic dampened disc designed to be used with aftermarket single mass flywheels. 110% Increased Holding Capacity The FX250 System uses the Power Plus I Heavy-Duty Pressure Plate and utilizes a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar without compromising the street friendly characteristics exhibited in the FX100 and FX200 series. Heavy-Duty Hybrid Disc with Fiber Tough Material on Pressure Plate side and Steel Backed Organic Friction Material on the Flywheel Side Fiber Tough and Steel Backed Organic Friction Material Heavy-Duty Sprung Hub (when applicable) Marcel Spring Wafer OEM or better Release Bearing Pilot Bearing (when applicable) Alignment Tool Instruction Card Decals *Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.

Show More Show Less

Clutch Masters FX250 Stage 2 Clutch Kit

T#:567404

Part#: 03148-HD0F-D

Ships in 9 Business Days

$ 1,291.99 USD

Add to Wish List

Qty

$ 1,291.99 USD

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool
Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel

Show More Show Less

JB Racing Lightweight Aluminum Flywheel - E39 M5

T#:16606

Part#: 520-160-240

Ships in 9 Business Days

$ 903.00 USD

Add to Wish List

Qty

$ 903.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 40.0lbs
JB Flywheel Weight = 13.0lbs

This item fits the following BMWs:
1999-2003 E39 BMW M5

Show More Show Less

Clutch Masters Lightweight aluminum flywheel

T#:559367

Part#: FW-228-AL

Ships on Sep 9, 2026

$ 847.99 USD

Add to Wish List

Qty

$ 847.99 USD

Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

Reduced mass equals increased acceleration
CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
CM uses an OE steel ring gear secured by bolts
CM offers a limited lifetime warranty
CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

Show More Show Less

Stage 2 Clutch Kit - MINI Cooper S

T#:599441

Part#: 03635HD0FAK

In Stock

9% off MSRP $ 1,534.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,399.99 USD

Add to Wish List

Qty

9% off MSRP

$ 1,534.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,399.99 USD

Add to Wish List

Rev up your vehicle's performance with this comprehensive clutch installation kit designed for a stage one clutch upgrade. The kit includes an aluminum flywheel, making it a complete package for enhancing your car's performance.

The FX200 (Stage 2) clutch system boasts high-performance capabilities for street driving. It offers a holding capacity that's 70% greater than stock clutches, thanks to the heavy-duty reinforced pressure plate. With Clutch Masters' unique Hi-Leverage™ pressure ring design, this system ensures top-tier performance.

The sprung hub/cushioned disc and steel-backed Organic/Fiber Tough disc further contribute to its durability and performance.

All Clutch Masters clutch kits come with the essential components, including the pressure plate, clutch disc, throw-out bearing (when applicable), pilot bearing or bushing (when applicable), and an alignment tool.

Show More Show Less

Clutch Masters Lightweight aluminum flywheel

T#:559233

Part#: FW-033-AL

Ships in 9 Business Days

$ 658.99 USD

Add to Wish List

Qty

$ 658.99 USD

Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

Reduced mass equals increased acceleration
CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
CM uses an OE steel ring gear secured by bolts
CM offers a limited lifetime warranty
CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

Show More Show Less

Clutch Masters FX250 Stage 2 Clutch and flywheel Kit

T#:567095

Part#: 03CM1-HD0F-AK

In Stock

$ 1,143.99

This product was last offered at the strikethrough price on
07-28-2026

$ 1,059.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,143.99

This product was last offered at the strikethrough price on
07-28-2026

$ 1,059.99 USD

Limited Qty Sale

Add to Wish List

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

Extra long life street system
Holding capacity 70% over stock
Heavy-Duty reinforced pressure plate
Rigid organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing
Pilot Bearing or Bushing
Alignment Tool

Fitment in following BMWs:
E46 BMW - Non-M submodels, For vehicles with 5 speed transmissions only. Fits 325i/Ci models with a production date up to 03/2003.
Z3 BMW - Non-M submodels, ACT recommends upgrading to the E36 M3 Slave cylinder for best clutch operation.

Show More Show Less

Clutch Masters Stage 3+ FX350 Clutch Kit

For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)

T#:567252

Part#: 03005-HDFF-D

In Stock

$ 671.99 USD

Add to Wish List

Qty

$ 671.99 USD

Add to Wish List

*Does not include flywheel. Requires use of single mass flywheel The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs. * Heavy-Duty Segmented Fiber-Tough Disc Steel Backed Segmented Fiber-Tough Friction Material Heavy-Duty Sprung Hub (when applicable) Marcel Spring Wafer OEM or better Release Bearing Pilot Bearing (when applicable) Alignment Tool Instruction Card Decals *Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Clutch Kits & Parts

Sub-Categories

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

Upgrade Your Clutch with the Performance Clutch Installation Kit

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results