Engineered in-house, our torque plate is designed to provide a robust and uniform clamping surface between the flywheel and crankshaft across a range of BMW engine applications. Compatible with both factory and Turner performance flywheels, it helps prevent surface galling and ensures consistent torque distribution during installation.

Features:

Prevents galling and wear at the crankshaft-to-flywheel interface under high clamping loads
Promotes even load distribution for improved fastener integrity and long-term reliability
Compatible with a variety of BMW flywheel setups, including OEM and aftermarket configurations
Design:

Precision-machined from cold rolled steel for high strength and dimensional accuracy
Heat treated to 32 HRC for increased surface hardness and wear resistance
Clear zinc anodized for enhanced corrosion protection
Laser-etched Turner logo
Ideal for performance builds and drivetrain refreshes, this torque plate is a critical component for maintaining proper flywheel installation and maximizing long-term durability across multiple BMW platforms.

Lightweight flywheel for quicker, effortless revs that improve throttle response and free up lost horsepower. Tested and approved by our engineering team at Turner Motorsport. Tested in early, late, ETA and IS model E30s for confirmed fitment.

Introducing our Turner Flywheel: an ingenious blend of lightweight design, rich features, and remarkable strength! Crafted from 4140 HT Steel, this flywheel is precision-machined from a solid piece, ensuring unmatched durability. By strategically trimming excess weight from its original design, we've achieved a significant reduction in weight, giving new life to your M20 engine. With upgraded efficiency, your M20 can now swiftly spin to high RPMs, unleashing the full power and prowess of this formidable engine. Our flywheel features a ring gear profile compatible with all starters, alongside a reference tab tailored for early cars equipped with bellhousing-mounted sensor crank position detection.

Do you have an early model transmission with the crank sensors on the bellhousing? Maybe you have a late 325is with the crank sensor on the front of the engine, or maybe you have a 1988 super ETA. No matter which E30 model you have, our flywheel is the perfect choice for you.

During the engineering process we encountered the full spectrum of M20 and flywheel combinations. Early cars with bellhousing crank sensors, late cars with front mounting crank sensors and even a super ETA. On this adventure we found both early and late single mass flywheels and even the dual mass that we thought for sure was just a myth. At first we were hesitant that we could make one flywheel to fit them all but with the persistence of our engineering team(fleet of E30 enthusiasts) we can proudly say our M20 flywheel does in fact fit all engine and transmission applications you can think of.

Features and benefits:

Fits early and late models with M20
Fits shallow and deep bellhousing transmissions
Ring gear suited for both starters (P# 12411726504 + 12411361874)
Heavier than other lightweight flywheels, lighter than OEM, its like the Goldie Locks of flywheels - its just right
Reference pin for bellhousing crank sensor
Strong Single-Piece 4140 HT Steel construction
Designed to be used with factory and OE clutches
Weight Comparisons:

​Factory single mass flywheel EARLY (11221705046) - 23.69 lbs.
Factory single mass flywheel LATE (11221706573) - 18.74 lbs.
Dual mass flywheel (21211225979) - 27.56 lbs.
Turner flywheel - 14 lbs.
What you need:

Short bellhousing transmissions (I/IS) - Throw-out bearing P# 21517521471
Tall bellhousing transmission (ETA) - Throw-out bearing P# 21511204525

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel 

Fitment in following BMWs:This item fits the following BMWs: 
2003-2005 E46 BMW 330i 330ci  only for 6-speed manual transmission  *Door Buster Special - New Product*

Elevate your BMW's performance with the Performance Clutch Installation Kit, comprising a clutch pressure plate and friction disc stage one clutch upgrade. Designed specifically for use with FW-635-AL or FW-635-SF, this FX100 (Stage I) kit is engineered to deliver a high-performance street system, boasting a remarkable 70% increase in holding capacity compared to the stock setup. The kit features a heavy-duty reinforced pressure plate ensuring enhanced performance, coupled with the innovative Hi-Leverage™ pressure ring design for superior functionality. The inclusion of a sprung hub/cushioned disc and steel-backed organic friction material guarantees durability and exceptional performance.

Benefits:

• 70% increased holding capacity over stock
• Heavy-duty reinforced pressure plate for enhanced performance
• Hi-Leverage™ pressure ring design for superior functionality
• Durable steel-backed organic friction material

This comprehensive performance clutch installation kit is your ticket to an exciting stage one clutch upgrade. It's equipped with an aluminum flywheel, providing all the essential components for enhancing your car's performance.

The FX300 (Stage 3) clutch system is designed for high-performance street driving. With a holding capacity that's 70% greater than stock clutches, thanks to the heavy-duty reinforced pressure plate, it's perfect for enthusiasts seeking a performance boost. Clutch Masters' unique Hi-Leverage™ pressure ring design ensures top-tier performance and durability.

The sprung hub/cushioned disc and steel-backed Segmented Kevlar disc contribute to its robustness, making it suitable for demanding driving conditions.

With every Clutch Masters clutch kit, you receive vital components, including the pressure plate, clutch disc, throw-out bearing (when applicable), pilot bearing or bushing (when applicable), and an alignment tool.

Upgrade your vehicle's clutch system and experience a new level of performance with the FX300 Stage 3 Clutch Installation Kit.

Enhance the performance of your MINI Cooper S with the Lightweight Aluminum Flywheel (11lbs.) FW-801-AL R52 R53. Crafted to perfection, this clutch master lightweight flywheel is designed specifically for MINI Cooper S models, providing improved functionality and responsiveness. Weighing just 11lbs., it offers a lightweight yet durable solution for optimizing your vehicle's performance.

• Lightweight aluminum flywheel designed for MINI Cooper S
• Compatible with R52 and R53 models
• Weighs only 11lbs. for enhanced performance
• Crafted for improved functionality and responsiveness

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit features a Heavy Duty pressure plate and a Performance Street Rigid clutch disc.

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the Performance Street Rigid clutch disc. This disc is an unsprung, rigid disk that is suited for aggressive street and moderate racing applications. The disc pad features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but due to its rigid nature, may suffer from slightly increased spline wear over time.

Clutch Kit Specs:

• Torque Rating: 440 ft/lbs
• 45% torque capacity increase over stock!
• Type of Disc: Street
• 26-count spline
• Spline Size: 1-3/8" inch
• Disc Weight: 2.3 lbs
• Pressure Plate Weight: 10.2 lbs
• 1 year Warranty from retail purchase date!

Turner Motorsport presents the MS Twin Disc Clutch Kit (MS-006-005) by DKM®, an exceptional clutch solution designed for BMW applications. Engineered to handle 100 to 200% more torque capacity, this twin disc kit features sprung organic discs, providing increased contact surface for higher torque capacity and an extended lifecycle. The kit includes a pressure plate, organic discs, steel flywheel, pilot bearing/bushing, throw-out bearing, and alignment tool for a comprehensive clutch upgrade.

• High Torque Capacity: Holds 100 to 200% more torque to the wheels.
• Durable Construction: Sprung organic discs for longevity and increased contact surface.
• Complete Kit: Includes pressure plate, discs, steel flywheel, pilot bearing/bushing, throw-out bearing, and alignment tool.
• CNC Machined Components: Ensures precision and reliability.
• Powerful Performance: Rated for upwards of 650 ft/lbs of torque.
• Billet Steel Flywheels: Enhances strength and durability.
• Practicable Pedal Feel: Offers sport-inspired performance without sacrificing pedal feel.
• Factory-Like Engagement: Maintains a close-to-factory engagement.
• Street Capable: Ideal for high horsepower street applications.

Upgrade your BMW's clutch performance with the MS Twin Disc Clutch Kit from Turner Motorsport.

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

• FX200 (Stage 2)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Sprung hub/cushioned disc

• Steel-backed kevlar friction material

This performance clutch installation kit is specially designed for a stage one clutch upgrade, providing a comprehensive set of components essential for optimized performance.

Key Features:

• FX100 (Stage I) Clutch: Perfect for high-performance street use
• Increased Holding Capacity: Up to 70% over stock
• Heavy-Duty Reinforced Pressure Plate: Ensures exceptional durability
• Hi-Leverage™ Pressure Ring Design: Enhances overall clutch performance
• Sprung Hub/Cushioned Disc: Offers smooth and controlled engagement
• Steel Backed Organic Friction Material: Dampened disc specifically designed for single mass flywheel

All Clutch Masters clutch kits contain essential components such as a pressure plate, clutch disc, throw-out bearing (if applicable), pilot bearing or bushing (if applicable), and alignment tool.

MINI R55 to R61 Release Bearing is an essential component for maintaining the smooth operation of your vehicle's clutch system. This high-quality release bearing ensures reliable performance and longevity, making it a crucial part for any MINI owner looking to maintain or repair their clutch system.

• Enhanced Durability: Designed to withstand the pressures of clutch engagement and disengagement, ensuring a longer lifespan.
• Smooth Operation: Provides a smooth and consistent release of the clutch, improving overall driving comfort.
• Precision Engineering: Manufactured to meet or exceed OEM specifications, guaranteeing a perfect fit and reliable performance.
• Easy Installation: Engineered for straightforward installation, reducing downtime and making the replacement process simpler.

This release bearing is ideal for replacing worn or faulty bearings to restore optimal clutch performance in MINI R55 to R61 models.

Upgrade your Mini with the MINI R Chassis Stage 4 S Clutch Kit - FX400 03635-HDC6-SK, designed for enthusiasts seeking enhanced performance and durability. This high-performance clutch kit offers superior handling of increased torque and horsepower, making it ideal for both street and track use. Engineered with advanced friction materials, it provides exceptional durability and heat resistance under extreme conditions. The Stage 4 S Clutch Kit ensures precise engagement and improved pedal feel, delivering a responsive driving experience that meets the demands of aggressive driving styles.

• Designed for increased torque and horsepower
• Superior handling and durability
• Advanced friction materials for heat resistance
• Precise engagement and improved pedal feel
• Ideal for street and track enthusiasts

Enhance your Mini's performance with the Stage 4 S Clutch Kit for reliable and responsive driving.

MINI F Chassis 2.0L Stage 1 Clutch Kit - FX100

A high-performance upgrade designed to enhance the driving experience of your Mini F Chassis 2.0L model. Engineered for improved clutch engagement and durability, this Stage 1 clutch kit provides increased torque capacity and smoother shifting. Its FX100 friction material ensures reliable performance under high-stress driving conditions, while the included pressure plate and release bearing guarantee a complete clutch replacement. With easy installation and superior performance, this clutch kit is perfect for enthusiasts seeking enhanced driving dynamics.

• High-performance upgrade for Mini F Chassis 2.0L model
• Improved clutch engagement and durability
• Increased torque capacity for smoother shifting
• FX100 friction material for reliable performance
• Easy installation and superior driving dynamics

MINI R56 Stage 4 MINI Clutch Kit - FX400 03635-HDCL-SK is a high-performance upgrade designed to enhance the clutch system in the MINI R56. This Stage 4 clutch kit by Clutch Masters offers a significant increase in holding capacity, providing 70% more clamping force than the stock clutch. It features a heavy-duty reinforced pressure plate and a Hi-Leverage™ pressure ring design for improved performance and durability. The sprung disc and steel-backed ceramic lining deliver exceptional engagement and longevity, making it an ideal choice for high-performance street driving.

• 70% increased holding capacity over stock for superior performance
• Heavy-duty reinforced pressure plate for enhanced durability
• Hi-Leverage™ pressure ring design for improved clamping force
• Sprung disc and steel-backed ceramic lining for reliable engagement
• Ideal for high-performance street driving