Flywheel Bolts - Set Of 8

T#:30430704

Part#: 11227805885FWKT

In Stock

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Genuine BMW hex bolt. M12X1,5X28

Be sure to replace your hardware with any flywheel removal service such as the rear main seal or clutch and flywheel.

Clutch Release Fork Lever - E36 E46 E39 E60 Z3 Z4

T#:13226

Part#: 21511223302

In Stock

8% off MSRP $ 37.12

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.98 USD

Add to Wish List

Qty

8% off MSRP

$ 37.12

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.98 USD

Add to Wish List

This is the factory clutch release fork for many BMW models with manual transmissions. The throw out bearing rides on the clutch release fork. While replacing other clutch components it may be a good idea to replace the forkalong with the throw out bearing.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2001-2006 E46 BMW M3
1991-1995 E34 BMW 525i 530i 540i
1997-2003 E39 BMW 525i 528i 530i M5
2004-2005 E60 BMW 525i 530i
2004-3/2007 E60 BMW 545i 550i
2004-2010 E60 BMW M5 - only for SMG
2004-3/2007 E63 BMW 645ci 650i
2004-3/2007 E60 BMW M6 - only for SMG
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
2006-2008 E85 BMW Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Genuine BMW Clutch Hose from Reservoir to Master Cylinder - F22,F30,F...

T#:177309

Part#: 35006857512

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Genuine BMW Hose - 7.5X13.5
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

BMS Billet Clutch Delay Valve (CDV) Delete - E8X/E9X

T#:2513299

Part#: BMWCLUTCHVAVLE

Ships in 1 Business Day

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.

Benefits:

Replaces factory clutch delay valve for improved performance
Quicker shifts and improved 0-60 times
Longer clutch life
Easy installation with factory-like connections
Made in the USA

Show More Show Less

BMW Clutch Stop - Bavarian Autosport

T#:1777897

Part#: B2300001KT

In Stock

Sale - Save 20% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

BMW Clutch Stop

Improve your shifting experience with the BMW Clutch Stop. This adjustable clutch stop is designed to install beneath the clutch pedal, allowing you to set the precise stopping point just after the clutch disengages. Once adjusted, you can achieve consistent, smooth, and efficient shifts every time, saving valuable time and effort.

Benefits:

Enhances shifting precision and consistency
Saves time with smooth and fast shifts
Adjustable design allows for personalized settings

Upgrade your BMW's shifting performance with the BMW Clutch Stop for a more enjoyable driving experience.

Show More Show Less

N54 Manual Transmission Complete Bellhousing Bolt Kit

T#:24876317

Part#: 23001222891KT

In Stock

$ 120.99 USD

Add to Wish List

Qty

$ 120.99 USD

Add to Wish List

Flywheel Bolt - Pack Of 8

T#:385641

Part#: 11222243051X8KT

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Most flywheel bolts are single-use only. They stretch when tightened. New mounting bolts are required with any flywheel swap. This is a set of 8 OE BMW M12x1.5x50mm flywheel bolts to help complete the job.

Replaces BMW #11221730533.

Show More Show Less

Genuine BMW Throwout Bearing Guide Tube

T#:22686

Part#: 23111224845

In Stock

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Replace this tube whenever the bearing or clutch kit is replaced.

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5

Show More Show Less

Genuine BMW Clutch Line

T#:49208

Part#: 21526765790

In Stock

5% off MSRP $ 51.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Qty

5% off MSRP

$ 51.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Genuine BMW Pipe
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E83 X3,E89 Z4,E90,E92,E93

Genuine BMW Hydraulic Clutch Line - E39 525i 528i 530i 540i M5 ...

T#:7553

Part#: 21526751171

Ships in 3 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Genuine BMW Connecting Line
This item fits the following BMW Chassis:
E39 M5,E39

Genuine BMW Clutch Slave Cylinder - Multiple BMWs

T#:49238

Part#: 21526785964

In Stock

3% off MSRP $ 113.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD

Add to Wish List

Qty

3% off MSRP

$ 113.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD

Add to Wish List

On vehicles that have hydraulic clutches, the slave cylinder transmits pedal movements to the clutch pack. The hydraulic aspect of this system makes clutch engagement much more comfortable. Like any hydraulic system though, the corrosive brake fluid can wear out seals and cause leaking and failure. If this is the case on your car, the best solution for repair is replacing the defective part.

Show More Show Less

Genuine BMW Clutch Line - E46, E83 X3 M54

T#:25149

Part#: 21526774274

In Stock

$ 63.22 USD

Add to Wish List

Qty

$ 63.22 USD

Add to Wish List

Genuine BMW Pipe
This item fits the following BMW Chassis:
E46 M3,E46,E83 X3

Genuine BMW Clutch Kit 6 Speed Manual Transmission - 21207603248 - E9...

T#:48901

Part#: 21207603248

In Stock

34% off MSRP $ 772.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD

Add to Wish List

Qty

34% off MSRP

$ 772.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD

Add to Wish List

This Genuine BMW OE replacement clutch kit from BMW comes stock for the 335is, 550i, and 650i. A lot of our customers install this as an upgrade for the 135i 335i and 535i!

Includes:

Clutch friction disc
Throwout/release bearing
Clutch fork lever
Pressure plate
Pressure plate bolts

Genuine BMW Clutch Kit for your 6 Speed Manual Transmission vehicle -
This item fits the following BMW Chassis:
E92,E93,F10,F12,F13

Show More Show Less

DKM Stage 3 Performance Twin Disc Clutch Kit w/ 8-Bolt Single Mass Fl...

For vehicles with a production date up to 01/2009

T#:583963

Part#: MS-006-075

In Stock

$ 1,299.99 USD

Add to Wish List

Qty

$ 1,299.99 USD

Add to Wish List

Working in collaboration with Competition Clutch, the up and coming German automotive performance company DKM has released a new line of high quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life.

Tracking your vehicle is all fun and games until you start burning through clutches as fast as you can afford to replace them. To end this cycle, the MS Twin Disc Clutch Kit is designed to hold up to 100 to 200% more torque capacity and provide you with a much-improved clutch life span. The two organic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention.

Kit Contents:
Pressure Plate
Two Organic Discs
Steel Single Mass Flywheel
Pilot Bearing/Bushing and Throw-out Bearing (when applicable)
Alignment Tool

Show More Show Less

Genuine BMW Clutch Release/Throw-out Bearing

T#:367982

Part#: 21511223582

In Stock

8% off MSRP $ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Qty

8% off MSRP

$ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Ensure smooth clutch operation in your BMW with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing. This crucial component, situated between the clutch pressure plate and release fork lever, is essential for optimal performance. When renewing your clutch, don't overlook the importance of replacing this genuine BMW bearing.

Key Benefits:

Genuine BMW quality guarantees a perfect fit.
Prevents clutch-related issues for reliable performance.

Upgrade your BMW's clutch system with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing.

Show More Show Less

Genuine BMW Clutch Master Cylinder Reservoir - E23 733i, E23 735i, E3...

T#:49080

Part#: 21521117729

Ships on Aug 24, 2026

$ 27.58 USD

Add to Wish List

Qty

$ 27.58 USD

Add to Wish List

Genuine BMW Expansion Tank
This item fits the following BMW Chassis:
E34 M5,E34

Hydraulic Clutch Line

T#:401562

Part#: 21526864475

In Stock

3% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Qty

3% off MSRP

$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Genuine BMW - Hydraulic Clutch Line

Genuine BMW Clutch Fork Lever

T#:15227

Part#: 21517564027

Ships in 1-2 days

16% off MSRP $ 116.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.13 USD

Add to Wish List

Qty

16% off MSRP

$ 116.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.13 USD

Add to Wish List

Genuine BMW Release Module
This item fits the following BMW Chassis:
E82 1M Coupe,E63,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW Clutch Fork Lever - Multiple BMWs

T#:367981

Part#: 21511204229

In Stock

5% off MSRP $ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

5% off MSRP

$ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

This is the factory clutch release fork for many BMW models with manual transmissions. The throw out bearing rides on the clutch release fork. While replacing other clutch components it may be a good idea to replace the fork along with the throw out bearing.

Show More Show Less

DKM Stage 1 Single-Mass Flywheel and Performance Clutch Kit - E34 E36...

T#:393279

Part#: MA-006-005

Ships on Nov 17, 2026

$ 749.99 USD

Add to Wish List

Qty

$ 749.99 USD

Add to Wish List

Looking to upgrade your stock clutch to something a little more beefy? The performance clutch kits from DKM are a great option to help get power to the wheels without breaking the bank. Working with Competition Clutch, DKM clutch discs and plates are constructed using quality materials to obtain greater strength and heat tolerance than OE clutches, helping to prevent wear and tear while still giving you increased toque capacity for quicker shifts and more power management.

Stage 1 Kits are best for moderately modified vehicles that want to add a single mass flywheel for quicker revs and a sportier engagement, without adversely affecting the clutch pedal's feel. *This is a 10 Spline clutch kit.*

This Stage 1 performance clutch kit includes the following items:

Pressure Plate
Sprung Organic Disc
Iron Single Mass Flywheel
Pilot Bearing/Bushing and Throw-out Bearing
Alignment Tool

**For vehicles with 5-speed transmission only.

Show More Show Less

E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel

T#:3771

Part#: 520-010-240

Ships in 9 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Genuine BMW clutch line - E36 M44 1.9L, E36 M52 2.8L, E36 M52 2.5L, E...

T#:49144

Part#: 21521164394

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Genuine BMW Plug-In Pipe
This item fits the following BMW Chassis:
E36 M3,E36

Genuine BMW Pilot Bearing

T#:360764

Part#: 21207536792

In Stock

6% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

6% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Clutch Slave Cylinder - E60 M5, E63 M6 w SMG transmission

T#:49734

Part#: 23017838938

In Stock

2% off MSRP $ 603.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 592.99 USD

Add to Wish List

Qty

2% off MSRP

$ 603.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 592.99 USD

Add to Wish List

This is a Genuine BMW clutch slave cylinder for E60 M5 and E63 MN6 with the SMG II GS7S47BG transmission. The slave draws fluid from the brake reservoir and applies it to the clutch fork/throw-out bearing. A bad slave cylinder could leave you stranded.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6

Show More Show Less

Single Mass Flywheel Conversion Kit - N14 Engines

We Price Match - Give Us A Call or Chat!

T#:39599347

Part#: 874013

In Stock

$ 563.99

This product was last offered at the strikethrough price on
06-30-2026

$ 465.00 USD

Add to Wish List

Qty

$ 465.00 USD

Add to Wish List

Genuine BMW Module, Clutch Switch - 61319122700 - E39 M5,E46 M3,E85 ...

The popular brown switch is no longer available

T#:16213

Part#: 61319122700

In Stock

$ 99.67 USD

Add to Wish List

Qty

$ 99.67 USD

Add to Wish List

If your clutch switch is bad, it will prevent the car from starting and seem similar to a bad starter, you will turn the key and nothing will happen. Replace yours to start your vehicle again.

Genuine BMW Module, Clutch Switch
This item fits the following BMW Chassis:
E39 M5,E46 M3,E85 Z4M,E39,E46,E85 Z4,E86 Z4

Show More Show Less

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

T#:3769

Part#: 520-040-215

Back Ordered

11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Qty

11% off MSRP

$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9

Show More Show Less

MODULE, CLUTCH SWITCH

T#:574113

Part#: 35426876898

In Stock

2% off MSRP $ 80.55

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.64 USD

Add to Wish List

Qty

2% off MSRP

$ 80.55

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.64 USD

Add to Wish List

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

Clutch Pedal Arm - E30,E30 M3

T#:25239

Part#: 35311154737

In Stock

7% off MSRP $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Limited Qty Sale

Add to Wish List

Replace your sloppy and squeaky clutch pedal with this Genuine BMW clutch pedal.

This item fits the following BMWs:
1984-1985 E30 BMW 318i
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix M3
1982-1988 E28 BMW 528e 533i 535i 535is M5

Show More Show Less

Genuine BMW Clutch Line

T#:7552

Part#: 21522282355

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Genuine BMW Screw Pipe
This item fits the following BMW Chassis:
E36 M3,E36

E46 M3 6MT JB Racing Lightweight Aluminum Flywheel

T#:302739

Part#: 520-180-240

Ships in 8 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
2001-2006 E46 BMW M3 (6-speed manual only, not for SMG)

Show More Show Less

Sachs Performance Pressure Plate - E36 Z3 M3 3.2L

T#:302269

Part#: 883082999792

In Stock

$ 430.99 USD

Add to Wish List

Qty

$ 430.99 USD

Add to Wish List

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

SPEC Clutches Twin disc SS-Trim Clutch Kit - E60 M5, E63 E64 M6 SMG ...

T#:341298

Part#: SB60SST

Ships in 3 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

When adding performance-enhancing modifications to your vehicle, you need a way to get the power to the wheels. The SPEC clutch kit is perfect for preventing premature wear and slippage during heavy acceleration. This kit is designed to hold up to 710 ft. lbs. For vehicles with SMG transmission only

Show More Show Less

SPEC Clutch Super Twin Performance Clutch Kit - w/ Organic Trim - BMW...

T#:3457425

Part#: SB55SST

In Stock

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

SPEC Super Twin multi-disc clutch and flywheel kits are designed for street and track use in vehicles with extreme horsepower and torque (700 to 1500 lbs.-ft.). They offer near-stock drivability, tremendous life expectancy, a no shimming/setup bolt-in installation, and maintenance-free operation. With their all-billet construction, these assemblies are smooth and quiet. Super Twins are constructed with aircraft-grade aluminum and high-carbon billet steel milled to industry-leading .001 in. tolerances for perfect balance and actuation. Friction is provided by dampened, full-faced, carbon-graphite discs. Additional features of SPEC Super Twin multi-disc clutch and flywheel kits: Organic, fiber, and full-metallic versions are also available Flywheel and track-spec hardware are included in each kit *Rebuildable by SPEC or the end-user *Ideal for all types of use, including: street, drag racing, drifting, road racing, time-attack, pulling, and rally

Show More Show Less

Genuine BMW Clutch Slave Cylinder

T#:49244

Part#: 21526795713

Ships in 1-2 days

4% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD

Add to Wish List

Qty

4% off MSRP

$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD

Add to Wish List

Genuine BMW Output Cylinder Clutch - D=22,20Mm
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36,F80 M3,F82 M4,F83

Genuine BMW SMG Pump Supply Hose - E46 M3

T#:20741

Part#: 21532282255

Ships in 2 Business Days

3% off MSRP $ 37.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD

Add to Wish List

Qty

3% off MSRP

$ 37.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD

Add to Wish List

Genuine BMW Connecting Line
This item fits the following BMW Chassis:
E46 M3,E46

Genuine BMW Clutch line - E34 525i

T#:64610

Part#: 35311158873

Ships in 1-2 days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Genuine BMW Pipe -
This item fits the following BMW Chassis:
E34

Genuine BMW Clutch Slave Cylinder

T#:367994

Part#: 21526775924

Ships in 2 Business Days

15% off MSRP $ 223.56

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 190.39 USD

Add to Wish List

Qty

15% off MSRP

$ 223.56

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 190.39 USD

Add to Wish List

Sachs Performance Throw-out Bearing - E12 E23 E24 E3 E30 E32 E36 E34 ...

T#:393810

Part#: 053151231031

In Stock

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

Improved bearing from Sachs Performance that is designed for a performance oriented clutch system. Resists wear and damage from increased spring pressure and higher engagement RPM's.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Performance equivalent of BMW part #'s:

1 207 275
1 208 423
1 223 168
1 223 366
1 225 203

Show More Show Less

Clutch Pedal Arm - E36, Z3

T#:20902

Part#: 35311158659

In Stock

8% off MSRP $ 73.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.73 USD

Add to Wish List

Qty

8% off MSRP

$ 73.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.73 USD

Add to Wish List

Replace your sloppy and squeaky clutch pedal with this Genuine BMW clutch pedal. The E36 clutch pedal is notorious for becoming sloppy with lots of left/right movement and for being squeaky. Often replacing just the bushings will not solve the issue. We recommend replacing the clutch pedal arm and installing upgraded clutch arm bushings.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Genuine BMW Clutch Hydraulic Pipe

T#:20739

Part#: 21526751466

In Stock

6% off MSRP $ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD

Limited Qty Sale

Add to Wish List

Qty

6% off MSRP

$ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Pipe -
This item fits the following BMW Chassis:
E39,E53 X5

F-Chassis B58 SPEC Billet Aluminum Flywheel

T#:7036582

Part#: SBB58A-2

In Stock

$ 749.00 USD

Add to Wish List

Qty

$ 749.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

E46 323/325/328/330 5-speed, Z3 2.3/2.8/3.0 JB Racing Lightweight Alu...

T#:4227

Part#: 520-140-240

In Stock

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

Stage 1 Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:397226

Part#: SB531-2

Ships in 3 Business Days

10% off MSRP $ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Qty

10% off MSRP

$ 759.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 683.99 USD

Add to Wish List

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

When it's time to replace your car's clutch, you face a crucial decision: upgrade or stick with stock? In many cases, upgrading is the preferred choice, especially when you pair the right clutch with a single mass flywheel. The secret to achieving the perfect blend of performance and driving experience lies in selecting a sprung hub clutch. This option allows you to enjoy the advantages of a single mass flywheel while eliminating issues like noise, vibration, and harshness (NVH), ensuring an outstanding driving performance.

Show More Show Less

Stage 2+ Performance Clutch Kit (for SPEC single-mass flywheel) ...

T#:211063

Part#: SB533H-2

In Stock

$ 839.00 USD

Add to Wish List

Qty

$ 839.00 USD

Add to Wish List

Tuning your N54/N55 with all of the bolt-on upgrades? Don't allow your clutch or flywheel let you down! The stock clutch is fine for a stock car or just a simple software upgrade. But anything more and it quickly becomes the weak link (especially with drag races or hard launches). The 135i/335i/535i/Z4 35i SPEC Stage 2+ clutch kit is perfect for owners who want a performance clutch that works great with simple bolt-on modifications and will have a minimum of downsides or trade-offs. SPEC has spent considerable time and effort on the 335i models to produce a performance clutch and flywheel package that holds up to track and drag strip demands but is also easy to live with for daily driving. This clutch kit is meant to be used only with a SPEC flywheel. Features: The flywheel has a peak torque rating of 545ft-lbs Limitations of the stock flywheel are eliminated Self-adjusting, like the factory design, and the engagement point can be adjusted Sprung hub clutch to be used with the single-mass flywheel with near-stock levels of noise, vibration, and refinement **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**

Show More Show Less

SPEC Single Mass Steel Flywheel - BMW E9X 335 2007-2009 (up to 1/2009...

T#:341709

Part#: SB53S-2

Ships in 3 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.

Show More Show Less

Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55

T#:597416

Part#: SB55S-2

Back Ordered

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

JB Racing Single Mass Lightweight Aluminum Flywheel - 6-speed - E46 3...

T#:3474

Part#: 520-190-240

Ships in 4 Business Days

$ 672.00 USD

Add to Wish List

Qty

$ 672.00 USD

Add to Wish List

This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.5lbs

This item fits the following BMWs:
2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)

Show More Show Less

Genuine BMW Throwout Bearing Guide Tube

T#:49868

Part#: 23117531354

Ships in 1-2 days

2% off MSRP $ 84.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD

Add to Wish List

Qty

2% off MSRP

$ 84.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD

Add to Wish List

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E85 Z4M,E46,E53 X5,E83 X3,E85 Z4,E86 Z4,E90,E92

Project Cars

SELECT YOUR BMW

BMW Performance Clutch Kits & Parts

Sub-Categories

Benefits:

BMW Clutch Stop

Benefits:

Key Benefits:

Enhance Your Car's Performance with the Perfect Clutch-Flywheel Combination

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results