Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
ARP Flywheel Bolts are a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best bolts we've found and we highly recommend them in any and all applications.
ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.
This item fits the following BMW Engines:
M20 2.5L
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
When it's time to replace your car's clutch, you face a crucial decision: upgrade or stick with stock? In many cases, upgrading is the preferred choice, especially when you pair the right clutch with a single mass flywheel. The secret to achieving the perfect blend of performance and driving experience lies in selecting a sprung hub clutch. This option allows you to enjoy the advantages of a single mass flywheel while eliminating issues like noise, vibration, and harshness (NVH), ensuring an outstanding driving performance.
SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding drivability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.
Kit includes:
Pressure plate
Clutch disc
Pilot bearing
Clutch Release Bearing
Clutch Alignment Tool
Clutch fork
Designed to be used with billet single mass flywheel
This product was last offered at the strikethrough price on
06-08-2026
This product was last offered at the strikethrough price on
06-08-2026
BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel offers a significant performance upgrade by replacing the heavy stock steel flywheel with a much lighter aluminum version. This JB Racing flywheel is designed to deliver faster acceleration, improved throttle response, and enhanced overall performance for your BMW.
The modern stock flywheels are burdened with additional components meant to dampen vibrations, which unfortunately adds unnecessary weight. The JB Racing aluminum flywheel, weighing just 10.0 lbs compared to the stock 25.0 lbs, eliminates this excess mass, allowing more power to reach the wheels and reducing the energy wasted on spinning the flywheel. Engine builders prioritize lightweight flywheels when optimizing race engines for maximum efficiency, and the difference is especially noticeable in how quickly the engine revs and reaches its power band.
This JB Racing lightweight flywheel is a direct replacement for the stock flywheel and is compatible with the factory BMW organic clutch. This compatibility ensures that you can use standard replacement clutches, making maintenance simple and cost-effective. The flywheel can also be resurfaced for a fresh contact surface, so there’s no need to buy a new one when it’s time to replace the clutch.
While single-mass aluminum flywheels like this one may result in slightly more noise and vibration compared to dual-mass designs, this can be managed with heavier transmission oil and sprung hub clutches, such as the Sachs Performance clutch available through Turner Motorsport.
Vehicle Compatibility:
| #SB533H-2 Variant | Use | Comments |
| "Sport" SPEC steel flywheel | daily driving; occassional drag strip | Use this with the SPEC steel single-mass flywheel. The clutch will be stiffer than the factory design but it will grab harder and stay connected with far less chance of slippage. The engagement point is changed but most drivers adjust within the first 100 miles. The failure-prone dual-mass flywheel is eliminated and a steel single-mass is used instead. Expect more noise and vibration from the steel but better reliability and slightly better performance. |
| "Super Sport" SPEC aluminum flywheel | more drag strip than street | Use this with the SPEC aluminum single-mass flywheel. The clutch will be stiffer than the factory design but it will grab harder and stay connected with far less chance of slippage. The engagement point is changed but most drivers adjust within the first 100 miles. The failure-prone dual-mass flywheel is eliminated and a lightweight aluminum single-mass is used instead. Expect a lot more noise and vibration with aluminum ("gearbox rattle") but better reliability and better performance. The engine will rev a lot faster too. |
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
ARP Flywheel Bolts are a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated, ensuring complete heat penetration, to increase the clamping load up to 200,000 psi. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best bolts we've found and we highly recommend them in any and all applications.
ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.
This item fits the following BMW Engines:
S14 2.3L
Upgrade your vehicle's performance with the SPEC clutch kit, engineered to efficiently transfer power to the wheels during high-performance driving scenarios. Prevent premature wear and slippage with this kit, offering a torque capacity of up to 456ft.lbs. When combined with the SPEC lightweight aluminum flywheel, experience rapid and efficient engagement.
Designed for a variety of applications including street, drag, autocross, road racing, pulling, rallye, and drift, this kit bridges the gap between stage 2 and stage 3, delivering enhanced drivability and engagement quality.
Experience increased acceleration, reduced turbo lag, improved mid-range torque, and decreased parasitic drag for increased crank efficiency with the SPEC clutch kit. Compatible with vehicles manufactured between 2006-2009.
SPEC's Stage 2 clutch features a full faced pure Kevlar disc complete with steel backing. This lining offers outstanding driveability like the Stage 1 kit, with an increased torque capacity and a longer life. The hub is double sprung with built-in spring reliefs for flexibility, along with a heat treatment for added strength and durability. This clutch is best served in any situation from daily driven on the street, to drag or autocross racing events.
Kit includes:
Pressure plate
Clutch disc
Pilot bearing
Clutch Release bearing
Clutch Alignment tool
Clutch fork
Designed to be used with a stock dual mass flywheel or any billet single mass designed for a factory style clutch.
Upgrade your BMW's performance with this stage 3+ clutch kit, boasting a carbon semi-metallic full-faced material for unmatched life, friction coefficient, and drivability. The double-sprung hub enhances flexibility with spring cover relieves, while heat-treated components in both hubs ensure strength and durability. Ideal for various driving scenarios, including street, drag, drift, autocross, road racing, pulling, rallye, and more.
