BMW Performance Clutch Kits & Parts

Throw Out Bearing (Sachs) for Most BMWs (see list)

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:371823

Part#: 21517521471

In Stock

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

Standard Throwout Bearing. Works with stock clutch/pressure plate or HD setup. Note: When you buy a standard clutch kit from us, it includes the throw-out bearing. This part is also known by a few other part#'s, including BMW Part# 21 51 1 223 366 (21511223366), BMW Part# 21 51 2 226 729 (21512226729), and Sachs part# 3151231031.

This throw out bearing fits most BMWs including:
1975-1983 E21 3 Series - all including 320i, 323i
1975-1989 E24 6 series including 630csi, 633csi, 635csi & E24 M6
1982-1988 E28 5 Series (all) including 528e, 533i, 535i & E28 M5
1984-1991 E30 3 series (all) including 318i, 318is, 325, 325e, 325es, 325i, 325is, 325ix & E30 M3
1988-1994 E32 7 Series 6 cylinder (735i, 735iL)
1989-1995 E34 5 Series 6 cylinder (525i & 535i)
1992-1999 E36 3 Series (all) including 318i, 318is, 318ti, 325i, 325is, 323is, 328i, 328is, and E36 M3
1997-2003 E39 5 Series 6 cylinder, including 528i, 525i & 530i
1999-2005 E46 3 Series with 5 speed, including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330Ci & 330xi (**no ZHP 6 speed)
2000-2006 X5 6 cylinder / X5 3.0
1996-2002 Z3 Roadster/Coupe including Z3 1.9, 2.3, 2.5, 2.8 and 3.0

Show More Show Less

Flywheel Bolts - Set Of 8

T#:30430704

Part#: 11227805885FWKT

In Stock

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

Genuine BMW hex bolt. M12X1,5X28

Be sure to replace your hardware with any flywheel removal service such as the rear main seal or clutch and flywheel.

Genuine BMW Clutch Hose from Reservoir to Master Cylinder - F22,F30,F...

T#:177309

Part#: 35006857512

In Stock

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Genuine BMW Hose - 7.5X13.5
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Clutch Release Fork Lever - E36 E46 E39 E60 Z3 Z4

T#:13226

Part#: 21511223302

In Stock

8% off MSRP $ 37.12

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.98 USD

Add to Wish List

Qty

8% off MSRP

$ 37.12

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.98 USD

Add to Wish List

This is the factory clutch release fork for many BMW models with manual transmissions. The throw out bearing rides on the clutch release fork. While replacing other clutch components it may be a good idea to replace the forkalong with the throw out bearing.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2001-2006 E46 BMW M3
1991-1995 E34 BMW 525i 530i 540i
1997-2003 E39 BMW 525i 528i 530i M5
2004-2005 E60 BMW 525i 530i
2004-3/2007 E60 BMW 545i 550i
2004-2010 E60 BMW M5 - only for SMG
2004-3/2007 E63 BMW 645ci 650i
2004-3/2007 E60 BMW M6 - only for SMG
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
2006-2008 E85 BMW Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Clutch Slave Cylinder - E46 (Incl M3-non SMG), X3, Z4 and MZ4 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:1309

Part#: 21526766279

In Stock

$ 58.13

This product was last offered at the strikethrough price on
03-06-2026

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

This is a replacement clutch slave cylinder, made by a high quality OEM manufacturer. Replaces 21526785966 and 21526775922.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 - Not for SMG
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

BMS Billet Clutch Delay Valve (CDV) Delete - E8X/E9X

T#:2513299

Part#: BMWCLUTCHVAVLE

Ships in 2 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.

Benefits:

Replaces factory clutch delay valve for improved performance
Quicker shifts and improved 0-60 times
Longer clutch life
Easy installation with factory-like connections
Made in the USA

Show More Show Less

BMW Clutch Stop - Bavarian Autosport

T#:1777897

Part#: B2300001KT

In Stock

Sale - Save 20% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

Qty

Sale - Save 20%

$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD

Add to Wish List

BMW Clutch Stop

Improve your shifting experience with the BMW Clutch Stop. This adjustable clutch stop is designed to install beneath the clutch pedal, allowing you to set the precise stopping point just after the clutch disengages. Once adjusted, you can achieve consistent, smooth, and efficient shifts every time, saving valuable time and effort.

Benefits:

Enhances shifting precision and consistency
Saves time with smooth and fast shifts
Adjustable design allows for personalized settings

Upgrade your BMW's shifting performance with the BMW Clutch Stop for a more enjoyable driving experience.

Show More Show Less

N54 Manual Transmission Complete Bellhousing Bolt Kit

T#:24876317

Part#: 23001222891KT

In Stock

$ 120.99 USD

Add to Wish List

Qty

$ 120.99 USD

Add to Wish List

Genuine BMW Throwout Bearing Guide Tube

T#:22686

Part#: 23111224845

In Stock

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Replace this tube whenever the bearing or clutch kit is replaced.

Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5

Show More Show Less

Genuine BMW Clutch Line

T#:49208

Part#: 21526765790

In Stock

5% off MSRP $ 51.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Qty

5% off MSRP

$ 51.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD

Add to Wish List

Genuine BMW Pipe
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E83 X3,E89 Z4,E90,E92,E93

Flywheel Bolt - Pack Of 8

T#:385641

Part#: 11222243051X8KT

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Most flywheel bolts are single-use only. They stretch when tightened. New mounting bolts are required with any flywheel swap. This is a set of 8 OE BMW M12x1.5x50mm flywheel bolts to help complete the job.

Replaces BMW #11221730533.

Show More Show Less

Genuine BMW Hydraulic Clutch Line - E39 525i 528i 530i 540i M5 ...

T#:7553

Part#: 21526751171

In Stock

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Genuine BMW Connecting Line
This item fits the following BMW Chassis:
E39 M5,E39

Genuine BMW Clutch Slave Cylinder - Multiple BMWs

T#:49238

Part#: 21526785964

In Stock

3% off MSRP $ 113.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD

Add to Wish List

Qty

3% off MSRP

$ 113.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD

Add to Wish List

On vehicles that have hydraulic clutches, the slave cylinder transmits pedal movements to the clutch pack. The hydraulic aspect of this system makes clutch engagement much more comfortable. Like any hydraulic system though, the corrosive brake fluid can wear out seals and cause leaking and failure. If this is the case on your car, the best solution for repair is replacing the defective part.

Show More Show Less

Genuine BMW Clutch Line - E46, E83 X3 M54

T#:25149

Part#: 21526774274

In Stock

$ 63.22 USD

Add to Wish List

Qty

$ 63.22 USD

Add to Wish List

Genuine BMW Pipe
This item fits the following BMW Chassis:
E46 M3,E46,E83 X3

Sachs Clutch Kit - E46 M3

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:4208

Part#: 21212282667

In Stock

$ 467.75 USD

Add to Wish List

Qty

$ 467.75 USD

Add to Wish List

E46 M3 Sachs OEM Clutch Kit. Disc, Pressure Plate and Throw-out bearing. Fits manual gearbox and SMG. While you are replacing the clutch you will have easy access to many parts that are not normally easy to get to. It is a perfect time to replace those items with minimal extra labor. Below are a list of some of the items that you may want to replace.

Optional items:
Exhaust Gaskets & Hardware:

11627830668 - exhaust seal ring x 2

11621318568 - bolts x 4

18301317898 - nuts x 4
Transmission Seals:

23127501580 - shift shaft seal

23121222769 - output seal

23127501328 - input seal
Additional Clutch Parts:

21511223328 - clutch pivot pin

11211720310 - pilot bearing

21207548052 - pressure plate bolts x 6

Fitment:
2001-2006 E46 M3 manual coupe, convertible
2001-2006 E46 M3 SMG coupe, convertible
2003-2006 E46 M3 CSL (SMG)

Show More Show Less

Genuine BMW Clutch Kit 6 Speed Manual Transmission - 21207603248 - E9...

T#:48901

Part#: 21207603248

In Stock

34% off MSRP $ 772.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD

Add to Wish List

Qty

34% off MSRP

$ 772.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD

Add to Wish List

This Genuine BMW OE replacement clutch kit from BMW comes stock for the 335is, 550i, and 650i. A lot of our customers install this as an upgrade for the 135i 335i and 535i!

Includes:

Clutch friction disc
Throwout/release bearing
Clutch fork lever
Pressure plate
Pressure plate bolts

Genuine BMW Clutch Kit for your 6 Speed Manual Transmission vehicle -
This item fits the following BMW Chassis:
E92,E93,F10,F12,F13

Show More Show Less

Clutch Kit - E30 325i/is 1987-1991, E34 525i 1989-1990

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:1665

Part#: 21211223102

In Stock

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW.

This item fits the following BMWs:
1987-1991 E30 BMW 325i 325ic 325is
1989-1990 E34 BMW 525i

Show More Show Less

Genuine BMW Clutch Release/Throw-out Bearing

T#:367982

Part#: 21511223582

In Stock

8% off MSRP $ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Qty

8% off MSRP

$ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD

Add to Wish List

Ensure smooth clutch operation in your BMW with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing. This crucial component, situated between the clutch pressure plate and release fork lever, is essential for optimal performance. When renewing your clutch, don't overlook the importance of replacing this genuine BMW bearing.

Key Benefits:

Genuine BMW quality guarantees a perfect fit.
Prevents clutch-related issues for reliable performance.

Upgrade your BMW's clutch system with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing.

Show More Show Less

Genuine BMW Clutch Master Cylinder Reservoir - E23 733i, E23 735i, E3...

T#:49080

Part#: 21521117729

In Stock

$ 27.58 USD

Add to Wish List

Qty

$ 27.58 USD

Add to Wish List

Genuine BMW Expansion Tank
This item fits the following BMW Chassis:
E34 M5,E34

Genuine BMW Clutch Fork Lever - Multiple BMWs

T#:367981

Part#: 21511204229

In Stock

5% off MSRP $ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

5% off MSRP

$ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

This is the factory clutch release fork for many BMW models with manual transmissions. The throw out bearing rides on the clutch release fork. While replacing other clutch components it may be a good idea to replace the fork along with the throw out bearing.

Show More Show Less

Hydraulic Clutch Line

T#:401562

Part#: 21526864475

In Stock

3% off MSRP $ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Qty

3% off MSRP

$ 67.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Genuine BMW - Hydraulic Clutch Line

E36 M3, MZ3 JB Racing Lightweight Aluminum Flywheel

T#:3771

Part#: 520-010-240

Ships in 10 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe

Show More Show Less

Genuine BMW Clutch Fork Lever

T#:15227

Part#: 21517564027

In Stock

16% off MSRP $ 116.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.13 USD

Add to Wish List

Qty

16% off MSRP

$ 116.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 97.13 USD

Add to Wish List

Genuine BMW Release Module
This item fits the following BMW Chassis:
E82 1M Coupe,E63,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW clutch line - E36 M44 1.9L, E36 M52 2.8L, E36 M52 2.5L, E...

T#:49144

Part#: 21521164394

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Genuine BMW Plug-In Pipe
This item fits the following BMW Chassis:
E36 M3,E36

Sachs Clutch Kit - E24, E28, E34

T#:374821

Part#: 21212226428

In Stock

$ 336.99 USD

Add to Wish List

Qty

$ 336.99 USD

Add to Wish List

240mm clutch kit

Clutch Release Bearing

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:28803208

Part#: 21511204525

In Stock

$ 101.99

This product was last offered at the strikethrough price on
03-17-2026

$ 63.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 101.99

This product was last offered at the strikethrough price on
03-17-2026

$ 63.99 USD

Limited Qty Sale

Add to Wish List

Clutch Slave Cylinder

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:14353722

Part#: 21522282055

In Stock

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Genuine BMW Pilot Bearing

T#:360764

Part#: 21207536792

In Stock

6% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

6% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Clutch Slave Cylinder - E60 M5, E63 M6 w SMG transmission

T#:49734

Part#: 23017838938

In Stock

2% off MSRP $ 603.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 592.99 USD

Add to Wish List

Qty

2% off MSRP

$ 603.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 592.99 USD

Add to Wish List

This is a Genuine BMW clutch slave cylinder for E60 M5 and E63 MN6 with the SMG II GS7S47BG transmission. The slave draws fluid from the brake reservoir and applies it to the clutch fork/throw-out bearing. A bad slave cylinder could leave you stranded.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6

Show More Show Less

Sachs Clutch Kit - E28, E30, E34, E36

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:370557

Part#: 21211223546

Ships in 6 Business Days

$ 193.99 USD

Add to Wish List

Qty

$ 193.99 USD

Add to Wish List

Replace your worn or slipping clutch to restore drivability

E30 318i/is, E36 318i, Z3 1.9 JB Racing Lightweight Aluminum Flywheel...

T#:3769

Part#: 520-040-215

Back Ordered

11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Qty

11% off MSRP

$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9

Show More Show Less

Genuine BMW Clutch line - E34 525i

T#:64610

Part#: 35311158873

Ships in 4 Business Days

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Genuine BMW Pipe -
This item fits the following BMW Chassis:
E34

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

MODULE, CLUTCH SWITCH

T#:574113

Part#: 35426876898

In Stock

2% off MSRP $ 80.55

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.64 USD

Add to Wish List

Qty

2% off MSRP

$ 80.55

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.64 USD

Add to Wish List

Clutch Pedal Arm - E30,E30 M3

T#:25239

Part#: 35311154737

In Stock

7% off MSRP $ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 143.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD

Limited Qty Sale

Add to Wish List

Replace your sloppy and squeaky clutch pedal with this Genuine BMW clutch pedal.

This item fits the following BMWs:
1984-1985 E30 BMW 318i
1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix M3
1982-1988 E28 BMW 528e 533i 535i 535is M5

Show More Show Less

Genuine BMW Clutch Line

T#:7552

Part#: 21522282355

Ships in 4 Business Days

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Genuine BMW Screw Pipe
This item fits the following BMW Chassis:
E36 M3,E36

Genuine BMW Module, Clutch Switch - 61319122700 - E39 M5,E46 M3,E85 ...

The popular brown switch is no longer available

T#:16213

Part#: 61319122700

In Stock

$ 99.67 USD

Add to Wish List

Qty

$ 99.67 USD

Add to Wish List

If your clutch switch is bad, it will prevent the car from starting and seem similar to a bad starter, you will turn the key and nothing will happen. Replace yours to start your vehicle again.

Genuine BMW Module, Clutch Switch
This item fits the following BMW Chassis:
E39 M5,E46 M3,E85 Z4M,E39,E46,E85 Z4,E86 Z4

Show More Show Less

E46 M3 6MT JB Racing Lightweight Aluminum Flywheel

T#:302739

Part#: 520-180-240

Ships in 9 Business Days

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
2001-2006 E46 BMW M3 (6-speed manual only, not for SMG)

Show More Show Less

Genuine BMW Clutch Slave Cylinder

T#:49244

Part#: 21526795713

Ships in 1-2 days

4% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD

Add to Wish List

Qty

4% off MSRP

$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD

Add to Wish List

Genuine BMW Output Cylinder Clutch - D=22,20Mm
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36,F80 M3,F82 M4,F83

Genuine BMW Clutch Release/Throw-out Bearing - E30 M3, E34 M5, Z3 M C...

T#:19645

Part#: 21512226729

Ships in 1-2 days

6% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD

Add to Wish List

Qty

6% off MSRP

$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD

Add to Wish List

Genuine BMW Clutch Release Bearing - H=25mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36

Genuine BMW SMG Pump Supply Hose - E46 M3

T#:20741

Part#: 21532282255

Ships in 3 Business Days

3% off MSRP $ 37.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD

Add to Wish List

Qty

3% off MSRP

$ 37.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD

Add to Wish List

Genuine BMW Connecting Line
This item fits the following BMW Chassis:
E46 M3,E46

Genuine BMW Clutch Master Cylinder - E46 E9X E82 E39 and more ...

T#:367993

Part#: 21526773670

In Stock

9% off MSRP $ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.99 USD

Add to Wish List

Qty

9% off MSRP

$ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.99 USD

Add to Wish List

A leaking master cylinder often feels like a failing clutch or a problematic transmission

Genuine BMW Clutch Slave Cylinder

T#:367994

Part#: 21526775924

In Stock

7% off MSRP $ 190.39

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD

Limited Qty Sale

Add to Wish List

Qty

7% off MSRP

$ 190.39

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD

Limited Qty Sale

Add to Wish List

Clutch Pedal Arm - E36, Z3

T#:20902

Part#: 35311158659

Ships in 1-2 days

8% off MSRP $ 73.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.73 USD

Add to Wish List

Qty

8% off MSRP

$ 73.96

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.73 USD

Add to Wish List

Replace your sloppy and squeaky clutch pedal with this Genuine BMW clutch pedal. The E36 clutch pedal is notorious for becoming sloppy with lots of left/right movement and for being squeaky. Often replacing just the bushings will not solve the issue. We recommend replacing the clutch pedal arm and installing upgraded clutch arm bushings.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Genuine BMW Clutch Hydraulic Pipe

T#:20739

Part#: 21526751466

In Stock

6% off MSRP $ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD

Limited Qty Sale

Add to Wish List

Qty

6% off MSRP

$ 50.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Pipe -
This item fits the following BMW Chassis:
E39,E53 X5

E46 323/325/328/330 5-speed, Z3 2.3/2.8/3.0 JB Racing Lightweight Alu...

T#:4227

Part#: 520-140-240

In Stock

$ 602.00 USD

Add to Wish List

Qty

$ 602.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i

Show More Show Less

E30 M3 JB Racing Lightweight Aluminum Flywheel

T#:3768

Part#: 520-050-228

Ships in 5 Business Days

$ 630.00 USD

Add to Wish List

Qty

$ 630.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

JB Racing Single Mass Lightweight Aluminum Flywheel - 6-speed - E46 3...

T#:3474

Part#: 520-190-240

Ships in 3 Business Days

$ 672.00 USD

Add to Wish List

Qty

$ 672.00 USD

Add to Wish List

This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.5lbs

This item fits the following BMWs:
2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)

Show More Show Less

Genuine BMW Clutch Pedal Compression Spring

T#:15990

Part#: 35006769442

Ships in 3 Business Days

5% off MSRP $ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Qty

5% off MSRP

$ 21.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 20.99 USD

Add to Wish List

Genuine BMW Compression Spring Reinforced -
This item fits the following BMW Chassis:
E63,E90,E92,E93,F06,F10,F12,F13,F80 M3,F82 M4,F83

E30 325i, E34 525i (M20) JB Racing Lightweight Aluminum Flywheel (Rep...

T#:385699

Part#: 520-060-228

Ships on Aug 31, 2026

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991 E30 BMW 325i 325ic 325is (with single-mass flywheel)
1989-1990 E34 BMW 525i (with single-mass flywheel)

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Clutch Kits & Parts

Sub-Categories

Benefits:

BMW Clutch Stop

Benefits:

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results