Showing 11948 results for ""

Sort By:

Cometic - Corporate Logo
T#:26738395
Part#: C4329-080
Back Ordered
$ 262.99 USD
Free Shipping on orders $49 and up
Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.
Show More Show Less
Bootmod3 - Corporate Logo
T#:33746522
Part#: BM3FFKTF55
Ships in 10 Business Days
$ 599.00 USD
Free Shipping on orders $49 and up

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

  • Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
  • 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! 
  • Fully reversible/removable and back to stock without a trace in minutes
  • Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
  • All connecting points sealed with fuel safe Viton o-rings
  • Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
  • CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
  • Power/CANBus 4-wire plug and play harness
    • 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
    • 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
  • Continental Flex Fuel sensor 3-wire harness
  • Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
  • Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
  • -6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

Show More Show Less
Engine Mount - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:586749
Part#: 22116754608
Ships in 3 Business Days
$ 61.99

This product was last offered at the strikethrough price on
06-08-2026

$ 49.99 USD
Free Shipping on orders $49 and up
$ 49.99 USD
Free Shipping on orders $49 and up

Water Pump Pulley
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:638798
Part#: 11517840403
Ships in 1 Business Day
$ 57.99 USD
Free Shipping on orders $49 and up

Valve Cover Gasket Set
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:589155
Part#: 11127582245
Ships in 1 Business Day
$ 17.49 USD
Free Shipping on orders $49 and up
Fuel-It! - Corporate Logo
T#:403509
Part#: BMW-S1LPFP-CK
Ships in 1 Business Day
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
This is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP.

Elring - Corporate Logo
T#:2691320
Part#: 11129059249
Ships in 1 Business Day
$ 145.99

This product was last offered at the strikethrough price on
05-07-2026

$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
This gasket set covers all of the gaskets, seals, and o-rings you find around the cylinder head. This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars, this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.
Show More Show Less
5150 Autosport - Corporate Logo
T#:23416526
Part#: FER-HPVSK-N55
Ships in 3 Business Days
$ 1,049.99 USD
Free Shipping on orders $49 and up
Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:577943
Part#: E36HS
Ships in 4 Business Days
$ 18.99 USD
Free Shipping on orders $49 and up
Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.
Show More Show Less

ATE - Corporate Logo
T#:1195919
Part#: 34351182270
Ships in 1 Business Day
$ 108.99 USD
Free Shipping on orders $49 and up
$ 108.99 USD
Free Shipping on orders $49 and up
Leaking or malfunctioning oil pressure switches can be disastrous
Elring Intake Manifold Gasket - N62 4.4L 4.8L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:363008
Part#: 11617521181
Ships in 2 Business Days
$ 15.59 USD
Free Shipping on orders $49 and up

Seals the connection between the intake manifold and the head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N62 4.4L 4.8L

Show More Show Less
Arc Terminator - Corporate Logo
T#:26471614
Part#: AT232F22BLA40MB5
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less


Braille - Corporate Logo
T#:36947237
Part#: B48-H6-L3
Ships in 4 Business Days
$ 398.99 USD
$ 398.99 USD
Intake Seal
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:639328
Part#: 13718596850
In Stock
$ 9.99

This product was last offered at the strikethrough price on
07-13-2026

$ 9.59 USD
Free Shipping on orders $49 and up
$ 9.59 USD
Free Shipping on orders $49 and up
O-ring gasket for air intake between charge pipe and intercooler.
OEM Febi Eccentric Shaft - BMW N55 S55 3.0L
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:31522948
Part#: 11377589883F
Ships in 2 Business Days
$ 1,014.99

This product was last offered at the strikethrough price on
05-04-2026

$ 910.74 USD
Free Shipping on orders $49 and up
$ 910.74 USD
Free Shipping on orders $49 and up
The eccentric shaft is an important component of BMW's Valvetronic system, a form of variable valve lift control. If the teeth on the gear or the lobes have worn out, this can result in improper valve lift, decreased or abnormal performance, and even damage to cylinder head components. Replace your eccentric shaft with this high-quality part from OEM Febi to restore performance and eliminate valve lift issues without the marked-up price of a Genuine BMW eccentric shaft.
Show More Show Less

Garrett - Corporate Logo
T#:396932
Part#: 11657646092
Ships in 2 Business Days
$ 1,307.99 USD
Free Shipping
$ 1,307.99 USD
Free Shipping
Upgrade Your BMW with Garrett Turbochargers

Garrett offers a comprehensive range of turbochargers suitable for various diesel and gasoline light vehicle engines, covering power units from 0.6 liters to 6.7 liters and everything in between. For heavy vehicles and off-highway equipment, Garrett's product lineup caters to engines with power ratings from 60hp to a formidable 4000hp. With Garrett's advanced technologies and innovations, major global automakers have integrated their products into nearly 100 million vehicles. The company continually launches approximately 100 new applications every year, spanning gas, diesel, natural gas, electric, and fuel cell powertrains.

Signs of a failing turbocharger include abnormal oil consumption, smoking, increased turbo lag, failure to maintain boost, or the vehicle entering "limp mode." To revive your BMW's performance, it's essential to replace any malfunctioning turbocharger.

Show More Show Less

Arc Terminator - Corporate Logo
T#:26471605
Part#: AT234F22BLA40MN2
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less
AGA Tools - Corporate Logo
T#:5175740
Part#: AGA-11-9-900-K
Ships in 7 Business Days
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
A must have for a timing job.

Accessory Belt
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:593938
Part#: 11287848606
Ships on Nov 4, 2026
$ 10.99 USD
Free Shipping on orders $49 and up
Pure Turbos - Corporate Logo
T#:46444175
Part#: N55PURE600EWG
In Stock
$ 2,589.00 USD
$ 2,589.00 USD
Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Elring O-Ring - E39
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:596434
Part#: 11137830114
Ships on Sep 24, 2026
$ 15.01

This product was last offered at the strikethrough price on
08-11-2026

$ 6.11 USD
Free Shipping on orders $49 and up
$ 6.11 USD
Free Shipping on orders $49 and up
39.34X2.62MM

Weistec - Corporate Logo
T#:22690729
Part#: 01-555-01793-6
Ships in 5 Business Days
$ 179.00 USD
Free Shipping on orders $49 and up
Direct replacement/bolt in for the S55 engines. CNC machined 6061 aluminum Anodized in Black
Eventuri - Corporate Logo
T#:32118904
Part#: EVE-X56M-CHG
Ships in 2 Business Days
$ 695.00 USD
Free Shipping on orders $49 and up
$ 695.00 USD
Free Shipping on orders $49 and up
Presenting the perfect addition to our X5M, XM intake system to optimize the flow path all the way to the turbos. Our carbon inlets have a larger volume than the stock inlets by maintaining a larger diameter all the way to the turbos. The stock inlets narrow down immediately after the connection to the intake which creates a restriction especially at higher boost levels. We have alleviated this restriction and also designed the curvature to be as smooth as possible allowing the turbos to function with reduced resistance. Made from prepreg carbon fiber with CNC machined flanges, the inlets also provide an aesthetic improvement to the engine bay. Benefits of the inlets are apparent with tuned vehicles where the boost pressure is higher and therefore the flow demand form the turbos is greater. This is where the larger volume of the carbon inlets help provide that extra flow. The performance gains are produced from providing the turbos with a less resistive flow path which allows them to reach peak boost sooner in the RPM range. When comparing to the stock inlets the differences are clear to see. Where the stock tubes narrow down immediately after the connection to the intakes, our tubes maintain a larger diameter and the reduction to the stock turbos is achieved with an internal radius on the machined flanges. This allows for larger volume whilst maintaining a smooth flow path. One of the drawbacks of the oversized inlets was the more aggressive reduction in size to match the stock turbos which created some flow constraints. NOTE: Some photos show our optional F9X X5M / X6M / G09 XM / G0X M60i Intake system available separately. Each inlet inlet set consists of: Prepreg Carbon Inlet Pair CNC Machined Turbo Flanges CNC Machined Breather Valve Assembly Compatible Models: F95 X5M Pre-LCI F96 X6M Pre-LCI G09 XM Pre-LCI G05 X5 M60i Pre-LCI G06 X6 M60i Pre-LCI G07 X7 M60i Pre-LCI ** This item is not eligible for return **
Show More Show Less
Rein - Return Hose
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:17771593
Part#: 11537615492
Ships in 1 Business Day
$ 45.99 USD
Free Shipping on orders $49 and up
Replace leaking or faulty hoses with Rein premium hoses to restore your vehicle to safe and optimal performance levels.


VTT Billet N54/N55 Vacuum/Boost Adapter - Dual Barb Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:600099
Part#: N5455VACADAP-DB
Ships in 1 Business Day
$ 68.99 USD
Free Shipping
$ 68.99 USD
Free Shipping
The Vacuum Boost Adapter from Vargas Turbos Tehcnologies is an easy way to get a boost source with out having to make irreversible changes to your intake manifold! These go inline to the throttle body and provide a full boost/vacuum signal from the manifold. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold.
Show More Show Less
OEM Rein Oil Separator Vent Hose - E60/1 E90/1 N52
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:402020
Part#: 11617522933
Ships in 1 Business Day
$ 19.99 USD
Free Shipping on orders $49 and up
If your BMW has a damaged vent hose, be sure to replace it to restore functionality of this rather important emissions system.
Victor Reinz - Corporate Logo
T#:362666
Part#: 13547522361
In Stock
$ 10.99

This product was last offered at the strikethrough price on
08-13-2026

$ 7.47 USD
Free Shipping on orders $49 and up
$ 7.47 USD
Free Shipping on orders $49 and up
Should be replaced any time the throttle body is removed

Corteco - Corporate Logo
T#:556322
Part#: 22116855456
Ships in 2 Business Days
$ 113.99

This product was last offered at the strikethrough price on
03-10-2026

$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Reduce driveline vibrations with a new motor mount

Valve Cover Gasket Kit - BMW N20
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:30164647
Part#: 11127507217KT2
Ships in 1 Business Day
$ 73.99 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Vacuum Pump Seal Valvetronic Actuator Seal HPFP Screws (2) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less
Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:638811
Part#: VTT-B58-VACCUM
Ships in 10 Business Days
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.
Show More Show Less

VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
Ships in 2 Business Days
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
Ships in 1 Business Day
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

DeatschWerks - Corporate Logo
T#:6091457
Part#: 9-1052
In Stock at Vendor
$ 21.00 USD
Free Shipping on orders $49 and up
Ensure a leak-free and professional installation with the DeatschWerks 9-1052 hardware kit.

Walker - Corporate Logo
T#:31324163
Part#: 11787645875
Ships in 1 Business Day
$ 101.99

This product was last offered at the strikethrough price on
04-14-2026

$ 91.99 USD
Free Shipping on orders $49 and up
$ 91.99 USD
Free Shipping on orders $49 and up
The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.
Show More Show Less
Elring - Corporate Logo
T#:596412
Part#: 11127567765
Ships in 1-2 days
$ 137.10

This product was last offered at the strikethrough price on
08-11-2026

$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
Just a head gasket, not a set
Advanced Auto Fabrication - Corporate Logo
T#:7608876
Part#: 116205
Ships in 1 Business Day
$ 25.00 USD
Free Shipping on orders $49 and up
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's M20 oil level block off plate for the E30 eliminates the OEM oil level sensor. On the M20 there is an oil level sensor on the oil pan that can be deleted in dedicated motorsports cars. This will allow you to remove a small bit of weight by getting rid of the oil level sender and associated wiring which goes all the way up to the overhead panel. By deleting the plug what you are also doing is eliminating another point of failure and clutter in the engine bay. Includes: Oil level block off plate Two locking nuts Two washers Shown on pan for reference.
Show More Show Less


CTS - Corporate Logo
T#:5788187
Part#: CTS-IT-825
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
CTS Turbo is proud to release the S63TU/N63TU 4.4L intake which is a complete replacement for the OEM system. The design intent was to create the largest, highest flowing intake on the market. Features a massive 6' velocity stack air filter and a 3' aluminum intake pipe that connects perfectly to the turbo inlet. An extra turbo heatshield is included in order to keep air intake temperatures as low as possible. Without any extra tuning, peak power gains range from 12 to 20HP (fuel and elevation dependent). All of the components included in the CTS air intake system work flawlessly together to provide increased horsepower and torque throughout the entire power band and an aggressive race-inspired sound. Features: Massive velocity stack reusable air filter 3' smooth air intake pipe Black powder coat for OEM look Great sound and power increase Affordable price without sacrificing quality
Show More Show Less
Meistersatz - Corporate Logo
T#:360224
Part#: 11421719855
Ships in 1 Business Day
$ 5.99 USD
Free Shipping on orders $49 and up
This is the replacement for the troublesome oil filter profile gasket on the M50, S50US, M52, S52, M52TU, M54, and S54 engines. The housing is separate from the engine block and in between there is this small profile gasket. The gasket shrinks over time which allows oil to seep out. In our own service shop, it's one of the most common service jobs we perform. 

One of the other common leak points is the VAN0S oil line and its seals. Since the line comes out with the oil filter housing anyway you might as well replace the line itself or at least the seals. 

On S54 engines (E46 M3, MZ3, Z4 M) there is a flanged head bolt going into the cylinder head, behind the thermostat cover. This holds the left side timing chain guide rail in place and if it's loose or falls out you could have a very serious engine failure to deal with. Make sure to check this bolt while you're replacing the oil filter housing seal. You only need to make sure it's tight. But if it's come loose you may want to replace the seal ring and use a small touch of oil-resistant thread sealer. 
Show More Show Less
OEM INA Timing Chain Guide Rail - BMW M10 M30
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:35998449
Part#: 11311253236
Back Ordered
$ 19.99 USD
Free Shipping on orders $49 and up

INA- Timing Chain Guide Rail offers exceptional performance and durability for your vehicle’s engine system, ensuring precise timing chain alignment and extended longevity. Designed to meet OEM specifications, this guide rail is a must-have for maintaining engine reliability and efficiency. Available through Turner Motorsport, this part is ideal for enthusiasts and professionals seeking high-quality replacement components.

Key Features:

Manufactured by INA, a trusted leader in automotive components

Ensures optimal timing chain alignment for smoother engine operation

High-quality materials provide resistance to wear and tear

Compatible with various vehicle makes and models for versatile use

Ideal for restoring factory performance and preventing costly engine damage

Show More Show Less

Race German - Corporate Logo
T#:6843926
Part#: RGSVNSDK
Ships in 3 Business Days
$ 101.99 USD
Free Shipping
$ 101.99 USD
Free Shipping
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers Anti Rattle Bushing Set (1 Bushing + 2 Bearings) OEM Vanos Sealing Gasket *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit does not include the modified sockets.
Show More Show Less

MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 1 Business Day
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less
AFE - Corporate Logo
T#:28171497
Part#: 77-92001
Ships in 3 Business Days
$ 52.00 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life
Show More Show Less

Braille - Corporate Logo
T#:558046
Part#: G30
Ships on Sep 10, 2026
$ 522.99 USD
Free Shipping on orders $49 and up
The G30 lithium battery from Braille is designed for the Import Tuner market (4 and 6 cylinder) for track use and has enough power for small black V8 race cars and hot rods with light electrical demands/accessories and standard compression. The G30 comes in the popular ETX 30 Group size, just like the B3121 AGM, so it is small and light enough to mount in a variety of locations. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1.
Show More Show Less
Victor Reinz - Corporate Logo
T#:593012
Part#: 13547563377
Ships in 1 Business Day
$ 11.99 USD
Free Shipping on orders $49 and up
Seals the throttle body to the intake manifold

ARP - Corporate Logo
T#:1105898
Part#: 201-4701
In Stock
20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
20% off MSRP
$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.
Show More Show Less

Fuel Injector Clinic - Corporate Logo
T#:6924325
Part#: IS802-0775H
Ships in 1 Business Day
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Show More Show Less
OEM Elring Cylinder Head Bolt Set - N20/26 2.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2602240
Part#: 11122212157
Ships in 1 Business Day
$ 75.99

This product was last offered at the strikethrough price on
05-07-2026

$ 73.99 USD
Free Shipping on orders $49 and up
$ 73.99 USD
Free Shipping on orders $49 and up
If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.
Bosch - Corporate Logo
T#:7266
Part#: 13627568421
Ships in 2 Business Days
$ 127.99

This product was last offered at the strikethrough price on
08-13-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping

Knock sensors detect pings in the engine and adjust ignition timing to restore perfect operation. Faulty knock sensors will throw engine codes or even lead to engine damage. Replace your sensor with a reliable, high quality Bosch sensor to ensure proper engine ignition timing.

Bosch # 13627568421 OEM replacement for BMW part # 13627568421, 12141709317, and 12141435502.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


Genuine BMW - Corporate Logo
T#:6617
Part#: 11127547058
Ships in 1-2 days
1% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.99 USD
Free Shipping
1% off MSRP
$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 123.99 USD
Free Shipping


Genuine BMW Repair Kit, Pressure Regulating Valve
This item fits the following BMW Chassis:
E53 48IS,E53 X5,E63,E65,E70 X5 X5

Fits BMW Engines including:
N62,N62N

Show More Show Less
Hose - From Oil Separator to Oil Dipstick Tube - E46 E39
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:2879
Part#: 11157532629
In Stock at Vendor
$ 11.99

This product was last offered at the strikethrough price on
03-26-2026

$ 10.99 USD
Free Shipping on orders $49 and up
$ 10.99 USD
Free Shipping on orders $49 and up
This is the updated hose that goes from the Crankcase Oil Separator Valve to the oil dipstick tube. This tube tends to get plugged with oil sludge and becomes brittle and cracks. It fits E46 323i 323ci 325i (M54) 325ci (M54) 325xi 328i 328ci 330i 330ci 330xi - E39 525i 530i - E60 525i 530i 2004-2005 - X3 2.5i 3.0i 2004-2006 - Z3 2.5i 3.0i - Z4 2.5i 3.0i 2003-2006.
In german, Rein means Pure. In the automotive industry the Rein name has quickly come to represent quality. With fitments for some of the world’s finest automobiles including BMW and Mini and guaranteed OE quality, Rein is a name you can trust.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi Only for cars with M54 engine
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 525i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2001-2002 Z3 BMW Z3 2.5i Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
Show More Show Less