Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
In Stock
New Item
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less
AFE - Corporate Logo
T#:48401495
Part#: 77-92013-MC
In Stock
Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.
Show More Show Less
AFE - Corporate Logo
T#:28171498
Part#: 77-92001-MC
In Stock
Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life
Show More Show Less

AFE - Corporate Logo
T#:28171497
Part#: 77-92001
Ships in 3 Business Days
Sale - Save 5% $ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 4 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Schrick - Corporate Logo
T#:1259
Part#: TMS1259
In Stock
Sale - Save 5% $ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD
Free Shipping
Sale - Save 5%
$ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD
Free Shipping
E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Schrick - Corporate Logo
T#:554296
Part#: 0284E1840-0V1
In Stock
Sale - Save 15% $ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD
Free Shipping
Sale - Save 15%
$ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD
Free Shipping
Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 122 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0,25
Show More Show Less
Fuel-It! - Corporate Logo
T#:403279
Part#: FILPFPK3
Back Ordered
Starting at $ 1,154.83 USD
Free Shipping on orders $49 and up
Starting at $ 1,154.83 USD
Free Shipping on orders $49 and up
This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
Sale - Save 1% $ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,536.90 USD
Free Shipping
Sale - Save 1%
$ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,536.90 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less

AFE - Corporate Logo
T#:557622
Part#: 44-LF022-MB
In Stock
Sale - Save 5% $ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD
Free Shipping on orders $49 and up
Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.
Show More Show Less
AFE - Corporate Logo
T#:557623
Part#: 44-LF029-MB
Ships in 3 Business Days
Sale - Save 5% $ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD
Free Shipping on orders $49 and up

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less
Fuel-It! - Corporate Logo
T#:403280
Part#: FILPFPK4
Ships in 2 Business Days
Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping
Sale - Save 3%
$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD
Free Shipping

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

    • A custom anodized billet fitting for the pump output and stock fuel line connection.
    • Our custom billet aluminum anodized bracket for the pump and float assembly
    • Two cotter pins to secure your float assembly
    • A new E85 compatible Walbro 450 pump
    • Spare vent tube clip
    • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

    • A complete plug and play solution by simply adding the secondary module
    • Our custom billet aluminum fitting to run both pumps in parallel
    • A new E85 compatible Walbro 450 pump
    • Wiring harness for the secondary pump
    • Spare vent tube clip
    • A new Walbro filter
  • Recommended accessories:
    • Lock Ring Removal Tool
    • Hobb's switch 
       
  • NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
Schrick - Corporate Logo
T#:338215
Part#: TMS11749
Ships on Dec 2, 2026
Sale - Save 15% $ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD
Free Shipping
Sale - Save 15%
$ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD
Free Shipping
E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Fuel-It! - Corporate Logo
T#:403273
Part#: FILPFPK2
Back Ordered
Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
Sale - Save 2%
$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD
Free Shipping
*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping
Show More Show Less

Fuel-It! - Corporate Logo
T#:403295
Part#: FILPFPK5
Back Ordered
Sale - Save 2% $ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
Sale - Save 2%
$ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your weak stock LPFP assembly with a high-flow E85-certified one. Standard Kit Includes: A brand new OEM LPFP bucket that is upgraded with a new Walbro 450 or 525 pump and filter. A new E85 compatible Walbro 450 pump (F90000274) that flows 50% more fuel than stock Optional A new E85 compatible Walbro 525 pump (F90000285) that flows 65% more fuel than stock NOTE: Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible. Have the system checked by your BMW center as soon as possible." As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored. If you have any questions about this please feel free to contact us. Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced. If this is a concern for you check out our Stage 3 fuel pump upgrade kits that retain the stock LPFP and add a secondary pump.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.
AFE - Corporate Logo
T#:394579
Part#: 44-LF029
In Stock
Sale - Save 7% $ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD
Free Shipping on orders $49 and up

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:51778123
Part#: VTT-S58-SINGLE-H
In Stock
New Item
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.
Vargas Turbo Technologies - Corporate Logo
T#:51778141
Part#: VTT-N54-OFA
In Stock
New Item
$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD
Limited Qty Sale
Free Shipping
$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD
Limited Qty Sale
Free Shipping
The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

Schrick - Corporate Logo
T#:338222
Part#: TMS3572
Ships on Dec 2, 2026
Sale - Save 28% $ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD
Free Shipping
Sale - Save 28%
$ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD
Free Shipping
E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Fuel-It! - Corporate Logo
T#:21242701
Part#: FFK-N5XB
In Stock
Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD
Free Shipping on orders $49 and up
This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
AFE - Corporate Logo
T#:48401494
Part#: 77-92013
Ships in 3 Business Days
Sale - Save 5% $ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD
Free Shipping on orders $49 and up
Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.
Show More Show Less
AFE - Corporate Logo
T#:211085
Part#: 79-13003
Ships in 3 Business Days
Sale - Save 5% $ 479.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 455.05 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 479.00

This product was last offered at the strikethrough price on
08-03-2026

$ 455.05 USD
Free Shipping on orders $49 and up
Looking to put some style under the hood of your BMW M2 Competition/M3/M4? aFe's hand-crafted, dry carbon fiber engine cover will set you apart from the rest. It is no shock that this race-inspired material is a favorite of BMW drivers from around the world. This cover features 2x2 twill weave carbon fiber with a matte finish, while the underside has been smoothed to ensure a high-quality all-around finish. Hassle-free Installation: Reuses OE factory grommets for an easy install.
Show More Show Less


AFE - Corporate Logo
T#:30164620
Part#: 46-60222
Ships in 3 Business Days
Sale - Save 5% $ 1,684.00

This product was last offered at the strikethrough price on
08-03-2026

$ 1,599.80 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 1,684.00

This product was last offered at the strikethrough price on
08-03-2026

$ 1,599.80 USD
Free Shipping on orders $49 and up

Enhance the performance of your MINI with the BladeRunner GT Series Turbocharger designed for the MINI N14 and N18 engines. This turbocharger from BladeRunner offers significant improvements in power and reliability, making it an ideal choice for enthusiasts seeking enhanced performance without compromising on durability.

  • Increased horsepower and torque output.
  • Improved turbo response and throttle response.
  • Enhanced durability and reliability.
  • Direct-fit replacement for easy installation.

Upgrade your MINI N14 or N18 engine with the BladeRunner GT Series Turbocharger and experience a new level of performance.

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7292057
Part#: VTT-N54-B58-CNV
Ships in 10 Business Days
Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD
Free Shipping on orders $49 and up
VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.
Show More Show Less
AFE - Corporate Logo
T#:372894
Part#: 44-LF022
In Stock
Sale - Save 7% $ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD
Free Shipping
Sale - Save 7%
$ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD
Free Shipping

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

    Show More Show Less

    Vargas Turbo Technologies - Corporate Logo
    T#:51918869
    Part#: VTT-INSERT-6
    Ships in 10 Business Days
    New Item
    $ 474.99 USD
    Free Shipping
    $ 474.99 USD
    Free Shipping
    The Vargas Billet Motor Mount Insert Kit is for BMW owners who want to eliminate the factory engine movement without the vibrations of a solid mount.

    Vargas Turbo Technologies - Corporate Logo
    T#:51918873
    Part#: VTT-INSERT-7
    Ships in 10 Business Days
    New Item
    $ 474.99 USD
    Free Shipping
    $ 474.99 USD
    Free Shipping
    The VTT F8X S55 kit offers a comprehensive refresh by providing brand-new OEM mounts equipped with VTT’s signature billet inserts.
    Vargas Turbo Technologies - Corporate Logo
    T#:52270288
    Part#: OCC1DUADRAVAL
    Ships in 10 Business Days
    New Item
    $ 53.99 USD
    Free Shipping
    $ 53.99 USD
    Free Shipping
    Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.

    Vargas Turbo Technologies - Corporate Logo
    T#:51918877
    Part#: VTT-N54CBRAW
    Ships in 10 Business Days
    New Item
    $ 112.99 USD
    Free Shipping
    $ 112.99 USD
    Free Shipping
    Upgrade your N54 engine bay with the VTT Stock Style Coil Hold-Down Kit, the ultimate marriage of form and function.
    Vargas Turbo Technologies - Corporate Logo
    T#:52094591
    Part#: VTT-FAB-062
    Ships in 10 Business Days
    New Item
    $ 53.99 USD
    Free Shipping
    $ 53.99 USD
    Free Shipping
    If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

    Vargas Turbo Technologies - Corporate Logo
    T#:51918876
    Part#: VTT-N54CBGOLD
    Ships in 10 Business Days
    New Item
    $ 112.99 USD
    Free Shipping
    $ 112.99 USD
    Free Shipping
    Upgrade your N54 engine bay with the VTT Stock Style Coil Hold Down Kit in Billet Gold.

    Vargas Turbo Technologies - Corporate Logo
    T#:51778130
    Part#: VTT-BMW-DAMPER-B
    Ships in 10 Business Days
    New Item
    $ 157.99 USD
    Free Shipping
    $ 157.99 USD
    Free Shipping
    Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.
    Vargas Turbo Technologies - Corporate Logo
    T#:52094552
    Part#: VTT-DCS-EWG-W-AC
    Ships in 10 Business Days
    New Item
    $ 1,049.99 USD
    Free Shipping
    $ 1,049.99 USD
    Free Shipping
    the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.
    Vargas Turbo Technologies - Corporate Logo
    T#:52270289
    Part#: OCC2SCSP
    Ships in 10 Business Days
    New Item
    $ 311.99 USD
    Free Shipping
    $ 311.99 USD
    Free Shipping
    This VTT Modular Catch Can kit is the ultimate solution for N54 owners looking to improve their engine’s health without overcomplicating their setup.


    Vargas Turbo Technologies - Corporate Logo
    T#:52270290
    Part#: OC16OADAPSC
    Ships in 10 Business Days
    New Item
    $ 64.99 USD
    Free Shipping
    $ 64.99 USD
    Free Shipping
    Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
    Vargas Turbo Technologies - Corporate Logo
    T#:51813338
    Part#: VTT-N54-CAO
    Ships in 10 Business Days
    New Item
    $ 31.99 USD
    Free Shipping
    $ 31.99 USD
    Free Shipping
    Engineered for high-performance BMW builds, the Vargas Coolant Adapter replaces the weak factory plastic neck located at the front of the cylinder head.
    Vargas Turbo Technologies - Corporate Logo
    T#:51778119
    Part#: VTT-G8X-OILCOOLE
    Ships in 10 Business Days
    New Item
    $ 109.00 USD
    Free Shipping
    $ 109.00 USD
    Free Shipping
    The VTT G8X Billet Oil Cooler Adapter Fittings are the essential building blocks for any custom S58 oiling project.

    Vargas Turbo Technologies - Corporate Logo
    T#:51672722
    Part#: VTT-G8X-SOLID-MO
    Ships in 10 Business Days
    New Item
    $ 524.99 USD
    Free Shipping
    $ 524.99 USD
    Free Shipping
    The VTT Billet Solid Engine Mounts are the ultimate solution for G8X owners looking to extract every ounce of performance from their S58-powered machines.

    Vargas Turbo Technologies - Corporate Logo
    T#:52270283
    Part#: N54-FRBPLUS
    Ships in 10 Business Days
    New Item
    $ 3,479.99 USD
    Free Shipping
    $ 3,479.99 USD
    Free Shipping
    The Vargas N54 F-RB+ kit is a ground-up re-engineering of the iconic "GC" line, focusing on thermal efficiency and structural longevity.
    Vargas Turbo Technologies - Corporate Logo
    T#:51918850
    Part#: VTT-HFCCG8X16
    Ships in 10 Business Days
    New Item
    $ 649.00 USD
    Free Shipping
    $ 649.00 USD
    Free Shipping
    The Vargas G8X High-Flow -16 Catch Can System is a ground-up solution specifically engineered for high-horsepower BMW G80 M3, G82/G83 M4, and G87 M2 builds.

    Vargas Turbo Technologies - Corporate Logo
    T#:51778135
    Part#: VTT-OCC-1-DUALCA
    Ships in 10 Business Days
    New Item
    $ 270.99 USD
    Free Shipping
    $ 270.99 USD
    Free Shipping
    If you want to take the guesswork out of plumbing a complex PCV system, the VTT "Ready-to-Install" Dual Catch Can Kit is the definitive answer.
    Vargas Turbo Technologies - Corporate Logo
    T#:52270238
    Part#: VTT-F90-GC+
    Ships in 10 Business Days
    New Item
    $ 6,299.99 USD
    Free Shipping
    $ 6,299.99 USD
    Free Shipping
    The VTT GC+ Turbocharger Upgrade is the ultimate solution for BMW F9X owners looking to push the absolute limits of the S63TU4 engine.

    Vargas Turbo Technologies - Corporate Logo
    T#:51672717
    Part#: VTT-MAP-HARNESS
    Ships in 10 Business Days
    New Item
    $ 59.99 USD
    Free Shipping
    $ 59.99 USD
    Free Shipping
    As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

    Vargas Turbo Technologies - Corporate Logo
    T#:49822558
    Part#: VTTB58CHECK
    Ships in 10 Business Days
    New Item
    $ 69.99 USD
    Free Shipping
    $ 69.99 USD
    Free Shipping
    The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
    Show More Show Less
    Vargas Turbo Technologies - Corporate Logo
    T#:51778127
    Part#: VTT-S55-GCMAX
    Ships in 10 Business Days
    New Item
    $ 5,249.99 USD
    Free Shipping
    $ 5,249.99 USD
    Free Shipping
    Vargas Turbo Technologies has completely overhauled the S55 turbocharger architecture with the GC-MAX kit, focusing on internal aerodynamics and thermal durability.
    Vargas Turbo Technologies - Corporate Logo
    T#:52094592
    Part#: VTT-FAB-063
    Ships in 10 Business Days
    New Item
    $ 53.99 USD
    Free Shipping
    $ 53.99 USD
    Free Shipping
    Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.


    Black Forest Industries - Corporate Logo
    T#:50934267
    Part#: BFI-BMW-E9X-M1
    Ships on Sep 4, 2026
    New Item
    $ 302.99 USD
    Free Shipping on orders $49 and up
    These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.
    Vargas Turbo Technologies - Corporate Logo
    T#:52164907
    Part#: S58INTPBLK
    Ships in 10 Business Days
    New Item
    $ 444.99 USD
    Free Shipping
    $ 444.99 USD
    Free Shipping
    Upgrade your S58’s reliability and power with the VTT Silicone Inlet Pipe Kit.