BMW Engine Parts

SCORCHER High-Performance Ignition Coil - Set Of 6 - BMW N52 N54 N55 ...

T#:48401495

Part#: 77-92013-MC

In Stock

Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.

Show More Show Less

aFe Power SCORCHER High-Performance Ignition Coil - 6 Pack - BMW M54 ...

T#:28171498

Part#: 77-92001-MC

In Stock

Sale - Save 5% $ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Qty

Sale - Save 5%

$ 262.00

This product was last offered at the strikethrough price on
08-03-2026

$ 248.90 USD

Add to Wish List

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life

Show More Show Less

aFe Power SCORCHER High-Performance Ignition Coil - BMW M54 S54 ...

T#:28171497

Part#: 77-92001

Ships in 3 Business Days

Sale - Save 5% $ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD

Add to Wish List

Qty

Sale - Save 5%

$ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD

Add to Wish List

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. Premium Direct Replacement Up to 20% More Spark Energy Increase Horsepower & Torque Improved Drivability & Smoother Idle Easier Cold Starts Longer Coil Life

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5m...

T#:1259

Part#: TMS1259

In Stock

Sale - Save 5% $ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,775.98

This product was last offered at the strikethrough price on
07-07-2026

$ 1,687.18 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW US S50 6 Cyl. 284-Degree - Intake Camshaft

T#:554296

Part#: 0284E1840-0V1

In Stock

Sale - Save 15% $ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,727.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,468.79 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 284 Duration Intake @ 1mm - 253 Intake Peak Timing - 122 Cam Lobe Lift Intake - 11, 9 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Clearance Intake - 0,25

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Pro GUARD D2 Oil Filter 4 Pack - M50 M52 M54

T#:557622

Part#: 44-LF022-MB

In Stock

Sale - Save 5% $ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD

Add to Wish List

Qty

Sale - Save 5%

$ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD

Add to Wish List

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

aFe Pro GUARD D2 Oil Filter 4 Pack - N54/55 BMW Engine

T#:557623

Part#: 44-LF029-MB

Ships in 3 Business Days

Sale - Save 5% $ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD

Add to Wish List

Qty

Sale - Save 5%

$ 54.00

This product was last offered at the strikethrough price on
08-03-2026

$ 51.30 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Aug 31, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

Red B58 BMW Coil Upgrade Adapter Kit - N55

T#:57086690

Part#: BMSN55CUAK-R

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Bucketless - N54/55 E-Series ...

T#:403280

Part#: FILPFPK4

Ships in 2 Business Days

Sale - Save 3% $ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

Sale - Save 3%

$ 552.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 537.83 USD

Add to Wish List

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.

The Stage 2 bucketless kit includes the following:

- A custom anodized billet fitting for the pump output and stock fuel line connection.
- Our custom billet aluminum anodized bracket for the pump and float assembly
- Two cotter pins to secure your float assembly
- A new E85 compatible Walbro 450 pump
- Spare vent tube clip
- A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

- A complete plug and play solution by simply adding the secondary module
- Our custom billet aluminum fitting to run both pumps in parallel
- A new E85 compatible Walbro 450 pump
- Wiring harness for the secondary pump
- Spare vent tube clip
- A new Walbro filter

Recommended accessories:
- Lock Ring Removal Tool
- Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N55

T#:49857415

Part#: BMSN55CUAK

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity. Why Upgrade: While the N55 is a reliable platform, factory coils can struggle under high boost, heat, and load. B58 coils deliver stronger, more consistent spark, and this adapter kit ensures a clean, OEM-quality integration. Features & Benefits: Direct-fit adapter harness & mounts for straightforward B58 coil installation Plug-and-play design — no cutting, splicing, or permanent modifications Secure coil seating & alignment for consistent performance and reliability Improved ignition stability under high-load or tuned conditions, helping reduce misfires Applications: Stage 1–3 N55 builds, turbo upgrades, ethanol blends, track use, and aggressive daily driving Drivers looking to eliminate heat- and boost-related ignition issues Anyone seeking an OEM+ quality coil upgrade without a messy DIY install Result: A clean, professional installation that modernizes your ignition system and delivers reliable spark performance under all conditions. If you provide the kit’s brand/part number and whether your valve cover is stock or aftermarket, I can refine this description for precise fitment and application.

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5m...

T#:338215

Part#: TMS11749

Ships on Dec 2, 2026

Sale - Save 15% $ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD

Add to Wish List

Sale - Save 15%

$ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD

Add to Wish List

E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N54/55 E-Series ...

T#:403273

Part#: FILPFPK2

Back Ordered

Sale - Save 2% $ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

Sale - Save 2%

$ 699.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 684.84 USD

Add to Wish List

*NORTH AMERICAN VEHICLES ONLY* If your current Low-Pressure Fuel Pump (LPFP) is struggling to keep up, is old and tired, or you need an E85-compatible pump assembly, this is the upgrade for you! This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85-certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs. All three options include the following: A complete plug-and-play solution by simply replacing your stock bucket A new E85-compatible Walbro 450 pump A new Walbro filter A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Flow testing prior to shipping

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 2 - N55 F-Series ...

T#:403295

Part#: FILPFPK5

Back Ordered

Sale - Save 2% $ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD

Add to Wish List

Sale - Save 2%

$ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD

Add to Wish List

This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your weak stock LPFP assembly with a high-flow E85-certified one. Standard Kit Includes: A brand new OEM LPFP bucket that is upgraded with a new Walbro 450 or 525 pump and filter. A new E85 compatible Walbro 450 pump (F90000274) that flows 50% more fuel than stock Optional A new E85 compatible Walbro 525 pump (F90000285) that flows 65% more fuel than stock NOTE: Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible. Have the system checked by your BMW center as soon as possible." As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored. If you have any questions about this please feel free to contact us. Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced. If this is a concern for you check out our Stage 3 fuel pump upgrade kits that retain the stock LPFP and add a secondary pump.

Show More Show Less

aFe Pro GUARD D2 Oil Filter - N54/55 BMW Engine

T#:394579

Part#: 44-LF029

In Stock

Sale - Save 7% $ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD

Add to Wish List

Qty

Sale - Save 7%

$ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD

Add to Wish List

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm...

T#:338222

Part#: TMS3572

Ships on Dec 2, 2026

Sale - Save 28% $ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD

Add to Wish List

Sale - Save 28%

$ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Fuel-It! Flex Fuel Kit - N54/N55 5 Series

T#:21242701

Part#: FFK-N5XB

In Stock

Sale - Save 4% $ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

Sale - Save 4%

$ 485.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 464.99 USD

Add to Wish List

This is a complete plug and play kit to install a Bluetooth ethanol sensor in your E-Series BMW. (Check compatibility for your platform below) This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgrade -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. This kit features a 0-5 volt analog output that integrates with the JB4, analog gauge, or any other ECU or tuner that supports 0-5 volt input. All of these kits utilize a custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated. *For the BMW N54 E-series JB4 platform connect the white wire to position #15 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *For the BMW N55 E-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

SCORCHER High-Performance Ignition Coil - BMW N52 N54 N55 S55 & More ...

T#:48401494

Part#: 77-92013

Ships in 3 Business Days

Sale - Save 5% $ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD

Add to Wish List

Qty

Sale - Save 5%

$ 52.00

This product was last offered at the strikethrough price on
08-03-2026

$ 49.40 USD

Add to Wish List

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils, a premium direct replacement for your factory coils. aFe's high-performance coils have a lower primary resistance than factory units, resulting in a high-energy spark that ensures complete combustion from idle to redline. Peak Output: Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of installation for optimal performance.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N54

T#:49857414

Part#: BMSN54CUAK

Ships on Aug 31, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Modernize your N54 ignition system with this N54 to B58 Coil Upgrade Adapter Kit, engineered to deliver an OEM-quality conversion for improved spark energy and consistency. Designed to pair B58-style pencil coils with the factory N54 engine harness, this kit provides a clean, reversible installation—no cutting, splicing, or guesswork required. Key Features & Benefits: Direct-fit adapter solution to run B58 coils on N54 applications Plug-and-play wiring integrates with the factory N54 harness for a factory-like install Secure coil positioning helps ensure proper seating and reliable long-term fitment Improved ignition stability under higher cylinder pressures—ideal for tuned, higher-boost setups Clean, serviceable conversion that maintains a tidy engine bay and simplifies future maintenance Ideal For: Stock to heavily modified N54 builds Vehicles running elevated boost, ethanol blends, or upgraded turbo systems Owners looking to reduce ignition-related misfires and improve combustion consistency under load If you share the brand/part number of the kit and which coils you’re pairing it with, I can tailor the write-up to match the exact components and fitment notes.

Show More Show Less

AFE Carbon Fiber Engine Cover - BMW F8X M2 M3 M4 S55 3.0L

T#:211085

Part#: 79-13003

Ships in 3 Business Days

Sale - Save 5% $ 479.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 455.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 479.00

This product was last offered at the strikethrough price on
08-03-2026

$ 455.05 USD

Add to Wish List

Looking to put some style under the hood of your BMW M2 Competition/M3/M4? aFe's hand-crafted, dry carbon fiber engine cover will set you apart from the rest. It is no shock that this race-inspired material is a favorite of BMW drivers from around the world. This cover features 2x2 twill weave carbon fiber with a matte finish, while the underside has been smoothed to ensure a high-quality all-around finish. Hassle-free Installation: Reuses OE factory grommets for an easy install.

Show More Show Less

MINI N14 N18 BladeRunner GT Series Turbocharger

T#:30164620

Part#: 46-60222

Ships in 3 Business Days

Sale - Save 5% $ 1,684.00

This product was last offered at the strikethrough price on
08-03-2026

$ 1,599.80 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,684.00

This product was last offered at the strikethrough price on
08-03-2026

$ 1,599.80 USD

Add to Wish List

Enhance the performance of your MINI with the BladeRunner GT Series Turbocharger designed for the MINI N14 and N18 engines. This turbocharger from BladeRunner offers significant improvements in power and reliability, making it an ideal choice for enthusiasts seeking enhanced performance without compromising on durability.

Increased horsepower and torque output.
Improved turbo response and throttle response.
Enhanced durability and reliability.
Direct-fit replacement for easy installation.

Upgrade your MINI N14 or N18 engine with the BladeRunner GT Series Turbocharger and experience a new level of performance.

Show More Show Less

aFe Pro GUARD D2 Oil Filter - M50 M52 M54

T#:372894

Part#: 44-LF022

In Stock

Sale - Save 7% $ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD

Add to Wish List

Qty

Sale - Save 7%

$ 16.00

This product was last offered at the strikethrough price on
08-03-2026

$ 14.80 USD

Add to Wish List

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

T#:50934267

Part#: BFI-BMW-E9X-M1

Ships on Sep 4, 2026

$ 302.99 USD

Add to Wish List

Qty

$ 302.99 USD

Add to Wish List

These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.

High Performance Engine Power Kit For Gen 1 MINI S

T#:50276469

Part#: 53-3M7702-10

Ships in 2 Business Days

$ 440.99 USD

Add to Wish List

Qty

$ 440.99 USD

Add to Wish List

Black Forest Industries Engine Mounts - Stage 1 - BMW F8X M2 / M3 / M...

T#:50934268

Part#: BFI-BMW-F8X-M1

Ships on Sep 4, 2026

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

By upgrading to a solid-core poly design, you eliminate the risk of fluid-filled mount failure while gaining a significantly more stable drivetrain platform.

BFI Transmission Mounts - Stage 1 - BMW E30 / E36 / E46 / E9X / Z3 / ...

T#:50934269

Part#: BFI-BMW-TRANS-01

Ships on Sep 4, 2026

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

This kit is a "must-have" for any E36, E46, or E9X owner looking to tighten up their drivetrain's foundation and ensure long-term mechanical reliability.

Black Forest Industries Engine Mounts - Stage 1 - BMW E30 / E36 / E46...

T#:50934264

Part#: BFI-BMW-90-01

Ships on Sep 4, 2026

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Eliminate the "drive-line slop" common in the E36 and E46 chassis with this Stage 1 Engine Mount kit.

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

T#:338217

Part#: TMS201495

Ships on Dec 2, 2026

Sale - Save 10% $ 3,804.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 3,424.49 USD

Add to Wish List

Sale - Save 10%

$ 3,804.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 3,424.49 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 280-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Dec 2, 2026

Sale - Save 10% $ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results