BMW Engine Parts

N54/N55 Low Temp Oil Thermostat Kit - 70c

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

Performance Oil Separator Kit - M52/S52

T#:51356040

Part#: 059015LA02KT2KT

Ships on Oct 5, 2026

Sale - Save 19% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

On M52/S52-equipped BMWs, the factory crankcase ventilation (CCV) system is a notorious weak link. Between brittle plastic corrugated hoses that crumble from heat soak and an internal cyclone diaphragm prone to tearing, a failing CCV leads to massive oil consumption, vacuum leaks, and that dreaded "howling" whistle.

This kit addresses these issues with all new components and hardware. Both oil separator hoses, the cyclone separator itself, the mounting grommet, and the retaining bolts are included. Servicing this system is guaranteed to restore performance lost as a result of worn CCV components.

Kit includes:

Cyclone Separator/Crankcase Pressure Regulator Valve High Performance Silicone Breather Hose Return Hose Mounting Grommet Hex Bolt (3)

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 4 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Bosch Starter Motor With Hardware

T#:56110332

Part#: SR0492NKT4

In Stock

$ 273.99

This product was last offered at the strikethrough price on
08-13-2026

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 2 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Sep 1, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

Red B58 BMW Coil Upgrade Adapter Kit - N55

T#:57086690

Part#: BMSN55CUAK-R

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N55

T#:49857415

Part#: BMSN55CUAK

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity. Why Upgrade: While the N55 is a reliable platform, factory coils can struggle under high boost, heat, and load. B58 coils deliver stronger, more consistent spark, and this adapter kit ensures a clean, OEM-quality integration. Features & Benefits: Direct-fit adapter harness & mounts for straightforward B58 coil installation Plug-and-play design — no cutting, splicing, or permanent modifications Secure coil seating & alignment for consistent performance and reliability Improved ignition stability under high-load or tuned conditions, helping reduce misfires Applications: Stage 1–3 N55 builds, turbo upgrades, ethanol blends, track use, and aggressive daily driving Drivers looking to eliminate heat- and boost-related ignition issues Anyone seeking an OEM+ quality coil upgrade without a messy DIY install Result: A clean, professional installation that modernizes your ignition system and delivers reliable spark performance under all conditions. If you provide the kit’s brand/part number and whether your valve cover is stock or aftermarket, I can refine this description for precise fitment and application.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships on Aug 31, 2026

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

S65 Timing Chain Kit - E90, E92, M3

T#:55353596

Part#: 11317838479KT2

Ships in 5 Business Days

$ 1,495.99 USD

Add to Wish List

Qty

$ 1,495.99 USD

Add to Wish List

Fuel Injector Replacement Kit - N52

T#:53044116

Part#: 13537531634RKT2

In Stock

Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Qty

Sale - Save 22%

$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

VANOS Rebuild Kit & Exhaust Hub Upgrade - E46 M3, Z3 M, Z4 M (S54) ...

T#:53608871

Part#: 11367832031KT5

Ships on Dec 24, 2026

Sale - Save 31% $ 703.99

This product was last offered at the strikethrough price on
05-30-2026

$ 484.10 USD

Add to Wish List

Qty

Sale - Save 31%

$ 703.99

This product was last offered at the strikethrough price on
05-30-2026

$ 484.10 USD

Add to Wish List

Take the guesswork out of S54 ownership. This all-inclusive kit targets the two most notorious failure points on the BMW S54 engine: broken exhaust hub tabs and degraded internal seals.

Turner Motorsport S54 VANOS Exhaust Hub Upgrade

The factory S54 exhaust hub is a ticking time bomb. Excessive play between the drive tabs and the oil pump disk creates a rhythmic rattling that eventually shears the tabs off, risking catastrophic engine failure.

While other kits require deep-engine surgery, our Turner Motorsport Hub Upgrade offers a "work smarter" approach.

Precision Engineering: Developed using 3D scanning and CAD modeling for a perfect, interference-free fit.

Superior Materials: Machined from high-strength 4340 steel and hardened to OEM specifications.

No Re-Timing Required: This bolt-on fix eliminates the failure point without the need to disassemble the VANOS unit or disturb engine timing, saving hours of labor.

ECS Tuning VANOS Seal Kit

The original BMW seals are made of Buna-N rubber, which quickly hardens and loses its sealing properties when exposed to synthetic oil and high heat. Our ECS engineering team has corrected this flaw.

Viton™ Upgrade: We utilize high-performance Viton O-rings for the internal seals, seal plate, and solenoid.

Chemical Resistance: These seals are designed to remain pliable and effective for the life of the engine, restoring lost low-end torque and smoothness.

ECS Tuning Rattle Repair Kit

Eliminate the dreaded "marbles in a can" sound. This kit addresses the axial play in the VANOS helical gears.

Hardened Steel: Our rings and washers are precision-ground to resist the wear and deformation that lead to engine rattle.

Silent Operation: Restores the refined sound and feel of your S54 across the entire RPM range.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Bremmen Aluminum Valve Cover Kit - N63 S63

T#:56978001

Part#: 11127588545KT2

In Stock

$ 619.99 USD

Add to Wish List

Qty

$ 619.99 USD

Add to Wish List

Maintaining proper crankcase ventilation and positive oil retention is crucial for the performance and longevity of BMW’s high-output twin-turbo 4.4L V8 engines. Extreme engine bay heat cycles cause original plastic covers to warp and internal PCV components to degrade, compromising engine seals and vacuum pressures.

Show More Show Less

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

T#:51778123

Part#: VTT-S58-SINGLE-H

In Stock

$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD

Limited Qty Sale

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

Vargas Oil Feed Adapter - BMW N54

T#:51778141

Part#: VTT-N54-OFA

In Stock

$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD

Limited Qty Sale

Add to Wish List

The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

VANOS Exhaust Hub Upgrade Kit - E46 M3, Z3 M, Z4 M (S54)

T#:53608869

Part#: 11367832031KT3

In Stock

Sale - Save 37% $ 410.99

This product was last offered at the strikethrough price on
05-30-2026

$ 257.29 USD

Add to Wish List

Qty

Sale - Save 37%

$ 410.99

This product was last offered at the strikethrough price on
05-30-2026

$ 257.29 USD

Add to Wish List

The factory VANOS exhaust hub on the S54 engine is known to develop excessive play where the drive tabs interface with the oil pump disk. Over time, this imprecise fitment causes a back-and-forth rattling motion that can result in the tabs shearing off inside the engine, risking catastrophic damage or complete engine failure. Unlike other aftermarket solutions that require full VANOS disassembly, retiming, or replacement of the oil pump disk, the Turner Motorsport S54 VANOS Hub Upgrade offers a smarter approach. Our bolt-on fix eliminates the common failure point without opening the VANOS unit or disturbing engine timing.

Our solution involves removing the worn tabs from your stock exhaust hub and installing our precision-fit replacement, which is precision-machined from 4340 steel and hardened to meet OEM specifications. Designed using 3D scanning and CAD modeling, the Turner Motorsport VANOS Exhaust Hub Upgrade provides a tight, interference-free fit into the oil pump disc, completely resolving the issue without unnecessary labor.

Features & Benefits:

Direct bolt-on solution for S54 VANOS oil pump drive tab failure, preventing potentially catastrophic damage to engine internals Precision-machined from high-strength 4340 steel and heat-treated to match OEM specifications Designed using 3D scanning and CAD modeling to ensure precise fitment within the OEM oil pump disc Engineered to eliminate the play that exists between the exhaust hub and oil pump disc from factory Backed by extensive real-world testing and our lifetime replacement program! Kit Contents:

Turner Motorsport Exhaust VANOS Hub Upgrade 4x Extended Length Hex Head Bolts (M6x30 Gr. 10.9) 8x OEM BMW VANOS Hub Hex Head Bolts (M6x25) 12x Fillister Head Torx Screw (M6x16) OEM Valve Cover Gasket OEM VANOS to Cylinder Head Gasket

Show More Show Less

Fuel Filter Kit - M57

T#:56291065

Part#: 13327811227KT2

In Stock

$ 55.42 USD

Add to Wish List

Qty

$ 55.42 USD

Add to Wish List

This fuel service kit pairs a high flow OEM replacement fuel filter with a fresh dampening ring and securing hex bolt. By replacing the filter and hardware together, you ensure fuel pressure stability

Rear Oxygen Sensor Set - N52, N54

T#:55353594

Part#: 11787545074/5KT2

In Stock

$ 366.99 USD

Add to Wish List

Qty

$ 366.99 USD

Add to Wish List

Sluggish oxygen sensors do a lot more than just light up your dashboard with an annoying Check Engine Light—they directly choke your BMW’s performance.

Turbocharger With Manifold And Gasket - F39, F48

T#:56291070

Part#: 11658626637KT4

In Stock

$ 1,317.99 USD

Add to Wish List

Qty

$ 1,317.99 USD

Add to Wish List

This kit pairs a precision-engineered Mitsubishi Turbocharger Assembly with an OEM Exhaust Manifold Gasket to ensure complete manifold to head sealing and peak efficiency

Bosch Oxygen Sensor Set - Pre and Post Catalytic Converter - N55 ...

T#:55857772

Part#: 11787589475KT2

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Extreme exhaust heat and carbon buildup degrade your factory oxygen sensors over time, sending lazy data to your DME and robbing you of performance.

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Performance Connecting Rod Bolt And Bearing Kit - S85

T#:55317700

Part#: S85RBKT2

In Stock

$ 1,103.00 USD

Add to Wish List

Qty

$ 1,103.00 USD

Add to Wish List

From the factory, the S85’s rod bearing clearances are notoriously tight. Over time, this lack of adequate oil clearance leads to premature wear, accelerated friction, and the looming threat of catastrophic engine failure.

Show More Show Less

King X-Series Bearings S65 Performance Rod Bearing Replacement Kit ...

T#:56218624

Part#: CR8066GPCXKT2

Ships in 2 Business Days

$ 976.99 USD

Add to Wish List

Qty

$ 976.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s X-series Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less

Mitsubishi Turbocharger With Manifold And Gasket - F39, F48 - B48 ...

T#:56254773

Part#: 11658626637KT3

In Stock

$ 1,317.99 USD

Add to Wish List

Qty

$ 1,317.99 USD

Add to Wish List

This turnkey replacement package pairs the genuine Mitsubishi OEM Turbocharger with a new Exhaust Manifold Gasket to restore instant boost delivery and leak free performance.

Genuine BMW Oil Pan Replacement Kit with Gasket and Hardware - N55 ...

T#:56038088

Part#: 11137600482KT5

In Stock

$ 267.72 USD

Add to Wish List

Qty

$ 267.72 USD

Add to Wish List

This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.

Show More Show Less

Turbo Oil Feed Line Kit - E70 M57 3.0L

T#:51883690

Part#: 11427808153KT

Ships in 3 Business Days

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

The oil feed lines for the M57's turbochargers are known to leak as they age, especially the J Line at the top of the engine due to its tight bend. This kit includes all three replacement oil feed lines, plus the banjo bolts and sealing washers needed to install them.

Show More Show Less

Turbos and Turbocharger Installation Kit - N54

T#:55317702

Part#: 13712247398KT5

In Stock

$ 1,869.05 USD

Add to Wish List

Qty

$ 1,869.05 USD

Add to Wish List

Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.

Show More Show Less

Front Oxygen Sensor Set - E9x, E82, E88, Z4

T#:55317713

Part#: BFR1/2O2SKT2

In Stock

$ 400.99

This product was last offered at the strikethrough price on
07-14-2026

$ 333.99 USD

Add to Wish List

Qty

$ 333.99 USD

Add to Wish List

Over time, that degradation robs your BMW of its crisp throttle response, tanks your fuel economy, and leaves you staring at a failed emissions ticket

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

T#:56110313

Part#: 11787558055KT

In Stock

$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.

Show More Show Less

King Bearings S65 Performance Rod Bearing Replacement Kit

T#:56218621

Part#: CR8066GPCKT2

Ships in 2 Business Days

$ 976.99 USD

Add to Wish List

Qty

$ 976.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less

S65 High Performance Rod Bearing And Bolt Set - E9x

T#:55857735

Part#: S65BABKT2

In Stock

$ 547.99 USD

Add to Wish List

Qty

$ 547.99 USD

Add to Wish List

We’ve packaged the ultimate preventative maintenance solution to keep your high-revving 4.0L V8 screaming all the way to its 8,400 RPM redline with peace of mind. This kit combines the industry's most trusted bearings with high-strength fasteners to eliminate the S65’s biggest Achilles' heel.

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Oil Filter Cap 2014-2019

T#:49822567

Part#: 11428575907

Ships in 3 Business Days

$ 29.99

This product was last offered at the strikethrough price on
05-08-2026

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N54

T#:49857414

Part#: BMSN54CUAK

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Modernize your N54 ignition system with this N54 to B58 Coil Upgrade Adapter Kit, engineered to deliver an OEM-quality conversion for improved spark energy and consistency. Designed to pair B58-style pencil coils with the factory N54 engine harness, this kit provides a clean, reversible installation—no cutting, splicing, or guesswork required. Key Features & Benefits: Direct-fit adapter solution to run B58 coils on N54 applications Plug-and-play wiring integrates with the factory N54 harness for a factory-like install Secure coil positioning helps ensure proper seating and reliable long-term fitment Improved ignition stability under higher cylinder pressures—ideal for tuned, higher-boost setups Clean, serviceable conversion that maintains a tidy engine bay and simplifies future maintenance Ideal For: Stock to heavily modified N54 builds Vehicles running elevated boost, ethanol blends, or upgraded turbo systems Owners looking to reduce ignition-related misfires and improve combustion consistency under load If you share the brand/part number of the kit and which coils you’re pairing it with, I can tailor the write-up to match the exact components and fitment notes.

Show More Show Less

Fuel pump and level sensor kit

T#:56471664

Part#: 16116768788KT2

Ships in 2 Business Days

$ 664.00 USD

Add to Wish List

Qty

$ 664.00 USD

Add to Wish List

This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.

Show More Show Less

Oil Separator kit - N63

T#:56291074

Part#: 11158636540KT2

Ships in 4 Business Days

$ 429.67 USD

Add to Wish List

Qty

$ 429.67 USD

Add to Wish List

If your BMW is burning oil, showing unmetered air faults, or suffering from degraded throttle response, a compromised breather system is usually the culprit. The N63 Crankcase Breather Package pairs Genuine BMW oil separators with OE tier Rein connecting pipes. Designed to restore factory level oil separation and sealed vacuum integrity across both cylinder banks

Show More Show Less

SNEED4SPEED MINI Cooper W11 Performance Engine - Super Sport 53SSCE ...

T#:54388498

Part#: 2028215

Ships in 2 Business Days

$ 8,295.00 USD

Add to Wish List

Qty

$ 8,295.00 USD

Add to Wish List

Rebuilt performance engines that are great for the street to track level

DRY Level 3 Timing Chain Kit (no fluids) - M62TU

T#:53149921

Part#: 11311435026NFKT

Ships in 1-2 days

Sale - Save 5% $ 1,070.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,020.67 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,070.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,020.67 USD

Add to Wish List

Vargas Billet Motor Mount Inserts - BMW F2X/F3X N55 & B58

T#:51918869

Part#: VTT-INSERT-6

Ships on Aug 31, 2026

$ 474.99 USD

Add to Wish List

Qty

$ 474.99 USD

Add to Wish List

The Vargas Billet Motor Mount Insert Kit is for BMW owners who want to eliminate the factory engine movement without the vibrations of a solid mount.

Vargas Billet Motor Mount Inserts - BMW F8X M3, M4

T#:51918873

Part#: VTT-INSERT-7

Ships on Aug 31, 2026

$ 474.99 USD

Add to Wish List

Qty

$ 474.99 USD

Add to Wish List

The VTT F8X S55 kit offers a comprehensive refresh by providing brand-new OEM mounts equipped with VTT’s signature billet inserts.

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...

T#:52270288

Part#: OCC1DUADRAVAL

Ships on Aug 31, 2026

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.

Vargas Coil Hold Down Kit - Clear Coat - BMW N54

T#:51918877

Part#: VTT-N54CBRAW

Ships on Aug 31, 2026

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

Upgrade your N54 engine bay with the VTT Stock Style Coil Hold-Down Kit, the ultimate marriage of form and function.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships on Aug 31, 2026

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.