BMW Engine Parts

BMW S65 4.0L Vanos Covers 7075 - QTY 4

T#:20749249

Part#: VTT-S65-VANOS-CO

In Stock

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

BMW S65 4.0L Vanos Covers 7075 provide a robust replacement for the factory plastic covers, which are known to fail over time. These high-performance Vanos covers snap on securely, offering a precise fit to eliminate vibration and prevent chafing of the engagement dogs.

High-Strength Construction: Machined from premium 7075 aluminum for superior durability and strength.
Corrosion Resistance: Anodized finish ensures long-lasting protection against corrosion.
Perfect Fitment: Designed for an exact fit to avoid issues such as vibration and chafing.
No Timing Tools Required: Easy installation with no need for engine timing tools.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

VTT S65 Billet Spark Plug Tubes

T#:29566613

Part#: VTT-S65-TUBE

Ships in 7 Business Days

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Tired of oil leaks from your plastic OEM S65 spark plug tubes? So were we, so we did something about it! VTT Anodized billet 6061 Aluminum S65 spark plug tubes. We took the OEM tubes and redesigned them. Then machined them out of billet 6061, anodized them in black, and added a US-made Viton O-ring with more surface area to ensure a leak-free connection for the life of your S65 that will not break down over time. These are the perfect to upgrade when doing a VC replacement, or upgrading to VTT Billet S65 VCs! These are available in sets of 8. Kit includes: 8 S65 Billet Spark Plug Tubes

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT N54 Crank Bolt Capture - N54

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Achilles Motorsport Upgraded Oil Pump Shaft Kit - BMW M54 M52TU ...

T#:1150773

Part#: 11-AM-UOPSK-M54

In Stock

$ 270.99 USD

Add to Wish List

Qty

$ 270.99 USD

Add to Wish List

The M54 engine has well-documented issues caused by harmonics. The extreme vibrations cause the weak oil pump shaft to shear off or the oil pump nut to come loose and fall off, all of which results in an instant loss of oil pressure. Achilles Motorsports decided to develop a solution to fix all of these known issues. Achilles takes their oil pump shafts to the extreme, using only the toughest materials and heat treatment processes to ensure optimum strength. The core of this kit is a hardened Chromoly shaft that is centerless ground to ensure absolute trueness. The shaft is engineered with an exclusive square key lock system that not only prevents the gear from ever spinning on the shaft but also adds strength to the area to which the gear mounts. Achilles Motorsports then replaced the pesky oil pump nut with an extended length bolt that is EDM drilled for safety wire to properly secure it for all conditions. Don't wait for your oil pump to fail and leave you stuck with costly engine repairs! Key Features: Hardened Chromoly centerless ground shaft EDM Drilled Bolt with a piece of safety wire included Grade 8 extended length hardware to secure the gear to the shaft Left hand threaded to prevent it from unexpectedly coming loose Exclusive Square key lock shaft and drive gear 100% serviceable & rebuildable without the need for grinding NOTE: Professional installation required! The shaft requires being pressed into the oil pump's inner rotor.

Show More Show Less

Achilles Motorsports Oil Pan Baffle Kit - BMW M52TU M54

T#:1150766

Part#: 11-AM-OPB-M54

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

SpecE46 Legal! The Achilles Motorsports Oil Pan Baffle was designed and manufactured to be used on racing, high-performance track, and street driven cars. Each baffle is precision laser cut from .090" heat-treated aluminum then hand-assembled and test fit to ensure accuracy and ease of installation. Achilles Motorsports' baffle design incorporates dual trap doors and a unique oil deflector that prevents oil from splashing out of the sump under hard braking. Together, these help minimize the sloshing of the oil inside the oil pan and keep oil accumulated around your pickup tube. The factory BMW oil pan doesn't do a very good job of keeping oil accumulated around the oil pick-up tube in high g-force situations. By keeping oil accumulated around the pickup tube you can eliminate the costly loss of oil pressure and potential damage to other vital engine parts commonly caused by high g-forces from hard acceleration and braking and high-speed cornering. Professional welding is required for installation! For use with BMW oil pan: 11131432703 During installation, while the oil pan is removed, we HIGHLY RECOMMEND upgrading your factory oil pump with the Achilles Motorsport Upgraded Oil Pump Shaft Kit (T#1150773). After numerous instances of sheered-off oil pump shafts and oil pump nuts coming loose, resulting in an instant loss of oil pressure, Achilles decided to come up with a solution - Don't let it happen to you!

Show More Show Less

Achilles Motorsports Oil Pan Baffle Kit - BMW M50 M52 S50 S52 ...

T#:1150765

Part#: 11-AM-OPB

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

The Achilles Motorsports Oil Pan Baffle was designed and manufactured to be used on racing, high-performance track, and street driven cars. Each baffle is precision laser cut from .090" heat-treated aluminum then hand-assembled and test fit to ensure accuracy and ease of installation. Achilles Motorsports' baffle design incorporates dual trap doors and a unique oil deflector that prevents oil from splashing out of the sump under hard braking. Together, these help minimize the sloshing of the oil inside the oil pan and keep oil accumulated around your pickup tube. The factory BMW oil pan doesn't do a very good job of keeping oil accumulated around the oil pick-up tube in high g-force situations. By keeping oil accumulated around the pickup tube you can eliminate the costly loss of oil pressure and potential damage to other vital engine parts commonly caused by high g-forces from hard acceleration and braking and high-speed cornering. Professional welding is required for installation! During installation, while the oil pan is removed, we HIGHLY RECOMMEND upgrading your factory oil pump with the Achilles Motorsport Upgraded Oil Pump Shaft Kit (T#1150772). After numerous instances of sheered-off oil pump shafts and oil pump nuts coming loose, resulting in an instant loss of oil pressure, Achilles decided to come up with a solution - Don't let it happen to you!

Show More Show Less

Slon Workshop E9X M3 (S65) Vanos Covers Kit

T#:35053681

Part#: SLON-E9XM-5VCK

In Stock

$ 390.00 USD

Add to Wish List

Qty

$ 390.00 USD

Add to Wish List

Enhance the durability of your BMW E9X M3 (S65) engine with the Slon Workshop Vanos Covers Kit. The OE plastic vanos cover is known for cracking and failure, posing a risk of plastic debris in the engine. Replace it with the IND Slon upgraded vanos covers for added peace of mind, preventing potential issues and ensuring the longevity of your engine.

Vanos Covers Kit for BMW E9X M3 (S65)
Upgraded design for enhanced durability
Prevents cracking and failure of the OE plastic vanos cover
Reduces the risk of plastic debris in the engine
Provides an extra level of peace of mind for engine safety

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Achilles Motorsport Upgraded Oil Pump Shaft Kit - BMW M50 M52 S50 S52...

T#:1150772

Part#: 11-AM-UOPSK

In Stock

$ 217.99 USD

Add to Wish List

Qty

$ 217.99 USD

Add to Wish List

The early M5X engines have well-documented issues caused by harmonics. The extreme vibrations cause the weak oil pump shaft to shear off or the oil pump nut to come loose and fall off, all of which results in an instant loss of oil pressure. Achilles Motorsports decided to develop a solution to fix all of these known issues. Achilles takes their oil pump shafts to the extreme, using only the toughest materials and heat treatment processes to ensure optimum strength. The core of this kit is a hardened Chromoly shaft that is centerless ground to ensure absolute trueness. The shaft is engineered with an exclusive square key lock system that not only prevents the gear from ever spinning on the shaft but also adds strength to the area to which the gear mounts. Achilles Motorsports then replaced the pesky oil pump nut with an extended length bolt that is EDM drilled for safety wire to properly secure it for all conditions. Don't wait for your oil pump to fail and leave you stuck with costly engine repairs! Key Features: Hardened Chromoly centerless ground shaft EDM Drilled Bolt with a piece of safety wire included Grade 8 extended length hardware to secure the gear to the shaft Left hand threaded to prevent it from unexpectedly coming loose Double-D keyed shaft and drive gear 100% serviceable & rebuildable without the need for grinding. NOTE: Professional installation required! The shaft requires being pressed into the oil pump's inner rotor.

Show More Show Less

Athena Cut Ring Head Gasket - 84.5mm - BMW M50 M52 (84mm Bore) ...

T#:26171655

Part#: ATH-HG-CR-M50-84

In Stock

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Upgrade your BMW engine's performance with the Athena Cut Ring Head Gasket. This gasket replaces BMW part # 11121726619 and 11121726617 and is specifically designed for M50 & M52 iron block inline 6-cylinder engines found in E34/E36 chassis. Standard OEM & MLS gaskets can only handle a certain amount of cylinder pressure before they start to leak, making the Athena Cut Ring Head Gasket the recommended choice for applications making 16+ psi. A compression leak passing the head gasket can cause a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena's gasket is crafted with premium quality reinforced M0115, an asbestos-free material that's original equipment approved and renowned for its superior quality. The AISI 304 stainless steel Cooper Rings bite into the aluminum head, providing maximum sealing capabilities around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2-bar boost. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Please be aware that the gasket should have a size that is 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Installation instructions: Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLS gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

VTT Gen-1 PCV CAP - B58

T#:4813265

Part#: VTT-B58-PCV-CAP

Back Ordered

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 6 Business Days

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

MINI R56 N14 CRYO Race Timing Chain Kit MINI S 2007-2010, JCW 2009-20...

T#:584196

Part#: 1828312C

In Stock

$ 239.99 USD

Add to Wish List

Qty

$ 239.99 USD

Add to Wish List

VTT N54 Turbocharger install kit

T#:398464

Part#: VTT-N54-INSTL

In Stock

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Achilles Motorsports Dual VANOS Elimination Kit - BMW M54 & M52TU ...

T#:1150771

Part#: 11-AM-VEK-M54

In Stock

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

Achilles Motorsports' Vanos Elimination kit includes the parts necessary to lock or eliminate your Dual Vanos system and give the engine builder the ability to take full advantage of the fine-tuning/degreeing associated with race specification camshafts. This helps ensure you get the maximum power, reliability, and horsepower from your engine. This kit is for Dual Vanos M54 & M52TU Engines

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x

T#:5309605

Part#: VTT-COIL-N5X-BLU

Ships in 4 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Clear - BMW...

T#:7530039

Part#: VACUUMCANRAW

Ships in 1 Business Day

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT Billet Power Steering Pulley - N54

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

5150 AutoSport S54 VANOS Hub

T#:35154980

Part#: 5150-VANOS

Back Ordered

$ 679.99 USD

Add to Wish List

Qty

$ 679.99 USD

Add to Wish List

R56-R61 N18/N12/N16 CRYO Race Timing Chain Kit MINI

T#:7718954

Part#: 1828313C

In Stock

$ 239.99 USD

Add to Wish List

Qty

$ 239.99 USD

Add to Wish List

Elevate the performance of your BMW MINI S 2011-2015/JCW 2013-2015, and MINI Cooper (NON S) 2007-2015 engines with the Cryogenic Hardened Race N18/N12/N16 Engine Timing Chain Set by Sneed4Speed. Specifically designed for high-performance track and race engines, this set includes a super-strength Cryogenic-hardened timing chain, heavy-duty plastic guides, and a high-strength tensioner. Engineered to withstand track and race conditions, these components also function effectively on the street. Standard equipment in Sneed4Speed Super Sport and Race engines, this set offers durability and reliability.

Cryogenic-hardened timing chain for enhanced strength
Heavy-duty plastic guides for durability
High-strength tensioner built for track and race use
Suitable for high-performance track and race engines
Compatible with street use

Show More Show Less

B58TU / B48TU One Way Crankcase Breather - G Chassis

For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)

T#:25606657

Part#: VTTB58BREATHERTU

In Stock

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

VTT Billet BMW Crankcase Breather - Screw In - BMW N54 N55 3.0L ...

FOR MODELS WITH VTT BILLET VALVE COVER ONLY

T#:38924625

Part#: VTT-CRANKBREATHE

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. This breather can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including most aftermarket oil catch can systems! The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

Vargas B58 Gen 1 One Way Crankcase Breather - F Chassis B58 3.0L ...

For Gen1 B58 Engines

T#:638800

Part#: VTT-B58-BREATHER

Ships in 3 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5″ tall from the valve cover oil cap area, and the filter is 2-3/4″ in diameter NOTE: NOT ALL THE B58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

BMW N55 Turbocharger install kit

T#:398463

Part#: VTT-N55-INSTL

Ships in 1 Business Day

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Achilles Motorsports E34 M50 Oil Pan Baffle Kit - E34 525i M50, E30 w...

For models with a 24v Swap (M5X, S5X engines) using the E34 525i M50 oil pan

T#:1150767

Part#: 11-AM-OPB-E34

In Stock

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

The best solution for 24v Swapped E30's using an M50, M52, S50, S52US, S54, or Euro S50 Engine with the E34 525i M50 oil pan! The Achilles Motorsports Oil Pan Baffle was designed and manufactured to be used on racing, high-performance track, and street driven cars. Each baffle is precision laser cut from .090" heat-treated aluminum then hand-assembled and test fit to ensure accuracy and ease of installation. Achilles Motorsports' baffle design incorporates dual trap doors and a unique oil deflector that prevents oil from splashing out of the sump under hard braking. Together, these help minimize the sloshing of the oil inside the oil pan and keep oil accumulated around your pickup tube. The factory BMW oil pan doesn't do a very good job of keeping oil accumulated around the oil pick-up tube in high g-force situations. By keeping oil accumulated around the pickup tube you can eliminate the costly loss of oil pressure and potential damage to other vital engine parts commonly caused by high g-forces from hard acceleration and braking and high-speed cornering. Professional welding is required for installation!

Show More Show Less

VTT Billet N54/N55 Vacuum/Boost Adapter - Basic Kit

T#:600097

Part#: N5455VACADAP-BK

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The Vacuum Boost Adapter from Vargas Turbos Tehcnologies is an easy way to get a boost source with out having to make irreversible changes to your intake manifold! These go inline to the throttle body and provide a full boost/vacuum signal from the manifold. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold.

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Black - BMW...

T#:7530037

Part#: VACUUMCANBLK

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

BMW N54 3.0L Wastegate Rattle Fix Repair Kit

T#:398014

Part#: VTT-N54-WF2

Ships on Aug 31, 2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

VTT N54 Waste Gate Repair Kit / Rattle Fix Tired of the annoying N54 Wastegate Rattle? Turbos still going strong, but can't deal with the embarrassing rattle anymore? We have the perfect kit for you. This kit comes with 1 set (both turbos) of Stainless Steel wear matched bushing, and flapper assembly, Wastegate arm, rod end, and Stainless steel 8mm C clip. These parts custom made for VTT upgrade the flapper assembly to a full 12.6MM or 1/2" flapper arm, and bushing compared to the stock 11.5mm. They also get rid of the 6mm rod end connection to a full 8mm connection with a stainless steel C clip. There is no better N54 Waste Gate upgrade on the market, and guess what? We also offer them for less than other upgrades which use the stock bushing size, rod end, and inferior materials. If you want to fix this right the first time, this is the kit for you! *Please note, assembly is required. This kit can only be installed with the turbos removed from the vehicle, and stock wastegate assembly removed from the housing. The new assemblies will need to be pressed in, then welded by a qualified welder. We offer no warranty, or returns for improperly installed wastegate assemblies.

Show More Show Less

Vargas S58 One Way Crankcase Breather - BMW S58 3.0L

T#:697896

Part#: VTT-S58-BREATHER

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW S58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all S58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter NOTE: NOT ALL THE S58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

T#:22196341

Part#: VTTS55CLCNV

In Stock

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 8 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Slon Workshop E9X M3 (S65) Vanos Covers Kit - Black Anodized ...

T#:15544970

Part#: E9XVANOSBA

Ships in 3 Business Days

$ 438.99 USD

Add to Wish List

Qty

$ 438.99 USD

Add to Wish List

The plastic OE vanos cover in your engine is commonly prone to cracking and failure leaving plastic pieces inside your engine and leading to catastrophic failure. Replace them with these IND Slon upgraded vanos covers to prevent further issues giving you and your engine an extra level of peace of mind.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Billet Check Valve - 10 Barb

T#:597641

Part#: VTT-CHECK-2

Ships in 2 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

Achilles Motorsports Performance Coated Rod Bearing Set - BMW M50 M52...

T#:1438265

Part#: 11-AM-RCRB-M50

Ships in 3 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Achilles Motorsports uses an extremely hi-tech Dry Film Lubricating process that will keep friction to a minimum allowing your engine to rev faster without worry while keeping oil temperature lower. Perfect for high-performance street, sprint, or endurance racing engines, this specialized coating protects vital engine bearings on dry engine starts and during extreme temperatures and high RPM operation. This specialized coating is the same process that is the choice of professional engine builders around the world, used on all NASCAR, ALMS, and Grand-Am engines. Achilles' bearings provide increased insurance against mechanical thermal breakdown compared to the OEM type bearing, showing much less wear during routine inspections. Note For high-performance and racing engines, we strongly recommend upgrading the OEM type connecting rod bolts to an ARP Connecting Rod Bolt Set to keep your bearing and caps tight even under the most extreme conditions, eliminating potential walk and bearing problems. As with all racing and performance bearings, professional installation is required. Please check all clearances as per the manufactures specifications.

Show More Show Less

Cryo Timing Chain Kit 2002-2008 W10 W11 Engine - R53 R52 R50 ...

T#:22723735

Part#: 1828212C

In Stock

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Enhance the performance of your MINI S 2002-2006 or convertible until 2008 with the Cryogenic Hardened Race W11/W10 Engine Timing Chain Set. Designed by Sneed4Speed for high-performance track and race engines, this kit is engineered to deliver exceptional strength and reliability.

Key Features:

Cryogenic Hardened Timing Chain: This super-strong chain is cryogenically hardened, ensuring it won't stretch like the stock chain.
Heavy-Duty Plastic Guides: The kit includes robust plastic guides for added durability.
Steel Gears: Steel gears provide reliable performance under high-stress conditions.
High-Strength Tensioner: The high-strength tensioner is designed for track and race use while still being street-compatible.

This timing chain set is a standard component in all Sneed4Speed Super Sport and Race engines. Elevate your MINI's performance on and off the track with this high-quality timing chain set.

Show More Show Less

Cometic Multi-layer Steel Head Gasket - B58

T#:25241786

Part#: COM-HG-B58G1

In Stock

$ 244.99

This product was last offered at the strikethrough price on
05-06-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 244.99

This product was last offered at the strikethrough price on
05-06-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Constructed with multiple layers of stainless steel and a proprietary coating, the MLX gasket offers superior sealing and load distribution capabilities. The coating is designed to withstand high temperatures and pressures, preventing gasket failure due to fatigue or stress. Additionally, the unique embossed sealing bead provides further sealing ability.

Show More Show Less

Ferrea High Performance Valve Spring Kit for BMW N55/S55

T#:23416526

Part#: FER-HPVSK-N55

Ships in 1-3 days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.

Show More Show Less

VTT Billet N54/N55 Vacuum/Boost Adapter - Dual Barb Kit

T#:600099

Part#: N5455VACADAP-DB

Ships in 1 Business Day

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The Vacuum Boost Adapter from Vargas Turbos Tehcnologies is an easy way to get a boost source with out having to make irreversible changes to your intake manifold! These go inline to the throttle body and provide a full boost/vacuum signal from the manifold. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold.

Show More Show Less

Sneed4Speed Street Series Piston Set Of 4 - N18 Stock Size 77mm ...

T#:7260311

Part#: 1828344

Ships in 2 Business Days

$ 425.00 USD

Add to Wish List

Qty

$ 425.00 USD

Add to Wish List

Sneed4Speed Street Series Cast Piston Set – N18 "STD" will be printed on the pistons. Please inspect before install. Built for MINI Cooper S (2011–2016) and JCW (2013–2016), this complete piston set is a direct-fit upgrade for your turbocharged N18 engine. Each kit includes pistons, wrist pins, and a full ring set pre-installed for easy assembly. Every piston comes with a 3-ring configuration: a top and second compression ring plus a multi-piece oil control ring (two thin rails with a wavy expander in between). The rings arrive already installed on the pistons, saving you setup time and ensuring proper fitment. Engineered from high-quality cast aluminum, these pistons are designed to safely handle 18–20 PSI of boost on a tuned setup—perfect for street-driven builds looking for reliable performance without stepping up to forged internals.

Show More Show Less