BMW Engine Parts

OEM Rein Oil Pan Bolt Set - M54 N52 N54 N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379282

Part#: 11132210959

In Stock

$ 44.89 USD

Add to Wish List

Qty

$ 44.89 USD

Add to Wish List

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Show More Show Less

BMW S65 4.0L Vanos Covers 7075 - QTY 4

T#:20749249

Part#: VTT-S65-VANOS-CO

In Stock

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

BMW S65 4.0L Vanos Covers 7075 provide a robust replacement for the factory plastic covers, which are known to fail over time. These high-performance Vanos covers snap on securely, offering a precise fit to eliminate vibration and prevent chafing of the engagement dogs.

High-Strength Construction: Machined from premium 7075 aluminum for superior durability and strength.
Corrosion Resistance: Anodized finish ensures long-lasting protection against corrosion.
Perfect Fitment: Designed for an exact fit to avoid issues such as vibration and chafing.
No Timing Tools Required: Easy installation with no need for engine timing tools.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

VTT S65 Billet Spark Plug Tubes

T#:29566613

Part#: VTT-S65-TUBE

Ships in 6 Business Days

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Tired of oil leaks from your plastic OEM S65 spark plug tubes? So were we, so we did something about it! VTT Anodized billet 6061 Aluminum S65 spark plug tubes. We took the OEM tubes and redesigned them. Then machined them out of billet 6061, anodized them in black, and added a US-made Viton O-ring with more surface area to ensure a leak-free connection for the life of your S65 that will not break down over time. These are the perfect to upgrade when doing a VC replacement, or upgrading to VTT Billet S65 VCs! These are available in sets of 8. Kit includes: 8 S65 Billet Spark Plug Tubes

Show More Show Less

Bav Auto Spark Plug Socket 12" x 5/8"

T#:580385

Part#: B8800072

In Stock

Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD

Add to Wish List

Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

AAE Remanufactured High Pressure Fuel Pump - BMW N54 N55 3.0L ...

T#:42200953

Part#: 13517616170RKT

Back Ordered

$ 816.99 USD

Add to Wish List

Qty

$ 816.99 USD

Add to Wish List

This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.

Show More Show Less

VTT N54 Crank Bolt Capture - N54

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Bav Auto Fuel Level Sensor & Fuel Pump Lock Ring Tool - BMW & MINI ...

T#:580400

Part#: B8800089

Ships on Sep 1, 2026

Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD

Add to Wish List

Used to remove fuel level and fuel pump lock rings properly to avoid damage.

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

BMW N54 3.0L Blow-By Vent Hose

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:594297

Part#: 11157553949

In Stock

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Bav Auto Crankshaft Front Oil Seal Removal / Installer Tool - N54, N5...

T#:580444

Part#: B8800139

Ships on Sep 1, 2026

Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Rein Piston Rings - Set - Single Piston - E36, Z3

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:591603

Part#: 11251405783

Back Ordered

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Replace your worn out piston rings with OE replacements - 86.415mm

Rein Oil Pan Gasket - E34, E36, E39, E46, E53, E60, E61, Z3

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:370783

Part#: 11131437237

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Metal / Rubber gasket

Bav Auto Fuel Injector Removal/Installation Tool - N55

T#:580388

Part#: B8800075

In Stock

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55

T#:580414

Part#: B8800107

Ships on Oct 19, 2026

Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Qty

Sale - Save 5%

$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD

Add to Wish List

Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.

Show More Show Less

Rein Alternator Mounting Screw Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:14795

Part#: 12310392568

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

BMW Set Of Alu. Screws Generator -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Rein Valve Cover Kit - N52

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:599640

Part#: 11127552281

In Stock

$ 355.99

This product was last offered at the strikethrough price on
06-19-2026

$ 312.99 USD

Add to Wish List

Qty

$ 312.99 USD

Add to Wish List

Enhance your BMW's performance with this comprehensive valve cover assembly, complete with a sealing gasket and engine cover mounts.

Key Benefits:
- Comprehensive valve cover assembly for BMW engines
- Includes sealing gasket for optimal performance
- Engine cover mounts ensure a secure fit
- Enhances overall engine efficiency and longevity

Show More Show Less

VTT Gen-1 PCV CAP - B58

T#:4813265

Part#: VTT-B58-PCV-CAP

Back Ordered

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve

Show More Show Less

OEM Rein Aluminum Oil Filter Housing And Heat Exchanger - BMW B46A B4...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:31059484

Part#: 11428596283

In Stock

$ 328.99 USD

Add to Wish List

Qty

$ 328.99 USD

Add to Wish List

The new upgraded Rein housing features full aluminum construction to eliminate many of the common causes for failure of the OE part, such as cracking or warping, and to ensure increased durability for a longer, problem-free service life. For easy installation, the oil filter cartridge and mounting hardware are included, as well as a pre-installed oil cooler. To ensure optimal performance, high-performance gasket materials are used throughout the assembly FEATURES & BENEFITS: Upgraded aluminum construction for increased durability and performance Pre-installed oil cooler for convenience Includes mounting hardware and oil filter cartridge High performance gasket materials used throughout the assembly

Show More Show Less

Bav Auto Fuel Injector Installer / Remover - N20/N55

T#:580389

Part#: B8800076

Ships on Oct 19, 2026

Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD

Add to Wish List

This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Rein Piston Rings - Set - Single Piston

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:592808

Part#: 11251247917

Ships in 3 Business Days

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Replace your worn out piston rings with OE replacements - 85.065mm

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Ferrea Performance Intake Valve - Stock Size

T#:583445

Part#: F1550P

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Rein Valve Cover - BMW N55

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:34114257

Part#: 11127570292

In Stock

$ 254.99 USD

Add to Wish List

Qty

$ 254.99 USD

Add to Wish List

Valve Cover by Rein is a crucial component designed to protect and seal the top of your BMW’s engine, ensuring optimal performance and preventing oil leaks. Engineered specifically for BMW engines, this high-quality valve cover provides a precise fit and exceptional durability. Available at Turner Motorsport, the Valve Cover by Rein offers long-lasting reliability, protecting critical engine components from damage while maintaining proper oil pressure.

Designed specifically for BMW engines for perfect fit and function
Prevents oil leaks, maintaining proper engine lubrication
Made from high-quality, durable materials for long-lasting performance
Direct-fit replacement ensures hassle-free installation
Protects critical engine components and improves engine efficiency
Helps maintain proper oil pressure for optimal engine performance

The Valve Cover VCE0101 by Rein from Turner Motorsport is the ideal solution for BMW owners seeking to protect their engine, prevent oil leaks, and ensure reliable performance.

Show More Show Less

SET OIL-FILTER ELEMENT

T#:573594

Part#: 11428593186

In Stock

4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

Qty

4% off MSRP

$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

Bav Auto Timing Chain Tensioner

T#:580357

Part#: B8800030

In Stock

Sale - Save 25% $ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 42.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.24 USD

Add to Wish List

Vital when servicing the timing system.

VTT N54 Turbocharger install kit

T#:398464

Part#: VTT-N54-INSTL

In Stock

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Bav Auto Media Blaster Kit - BMW N20 N54 N55

T#:582473

Part#: B1100008

Ships in 6 Business Days

Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Qty

Sale - Save 8%

$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x

T#:5309605

Part#: VTT-COIL-N5X-BLU

Ships in 10 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Clear - BMW...

T#:7530039

Part#: VACUUMCANRAW

Ships in 1 Business Day

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT Billet Power Steering Pulley - N54

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

Rein Crankcase Ventilation Return Pipe - E60, E90, Z4

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:402081

Part#: 11157567801

Ships in 3 Business Days

$ 81.38

This product was last offered at the strikethrough price on
08-13-2026

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

Located under intake manifold

Rein Piston Ring - Priced Per Piston - E28, E30, E34, E36

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379806

Part#: 11251713192

Ships in 2 Business Days

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

For use on stock pistons, will need 6 sets to replace all piston rings in the engine

Rein Piston Ring Set - Priced Per Piston

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:592811

Part#: 11251713178

Ships in 3 Business Days

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Replace your worn rings - 84.000mm

Rein Piston Ring Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379819

Part#: 11251437077

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Standard bore replacement piston rings

Rein - Crank Case Vent Hose - F10 M5, F12 M5, F13 M6

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:26404796

Part#: 11157843151

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Rein Crank Case Vent Hose is a high-quality replacement part designed to enhance the performance and longevity of your vehicle’s engine. Manufactured by Rein Automotive, this vent hose is built to withstand high pressures and temperatures, ensuring reliable crankcase ventilation. Engineered for a precise fit, it helps prevent harmful oil vapors from entering the intake manifold, improving overall engine efficiency. Available at Turner Motorsport, this vent hose is an ideal choice for drivers looking to maintain their vehicle’s performance and emissions standards.

Designed for optimal crankcase ventilation, improving engine performance
Reduces oil vapor contamination in the intake system, protecting engine components
Made with durable materials to resist wear from heat and pressure
Ensures precise fit and easy installation as a direct OEM replacement
Helps reduce harmful emissions, supporting cleaner engine operation

Turner Motorsport offers the Rein Crank Case Vent Hose as a dependable solution to keep your engine running smoothly while meeting emissions regulations.

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

Bav Auto Crankshaft Rear Oil Seal Removal / Installer Tool - N51, N52...

T#:580412

Part#: B8800104

In Stock

Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.

Rein Oil Pan Bolt Set - E70, E82, E83, E88, E90, E91, E92, E93 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:379283

Part#: 11130396707

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Oil pan bolts need to be replaced any time they are removed. Made in Germany!

Rein Coolant Pipe - Return Line - MINI N18

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:8014962

Part#: 11539845352

In Stock

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

This line connects the thermostat to the turbo and contains the connection for the line that runs to the coolant expansion tank. *Does not contain a coolant hose to connect to the bottom of the expansion tank. A critical line in the coolant system. Loop end on one side of the line for a hollow banjo bolt.

Show More Show Less

OEM Rein Cylinders 5-8 Crankcase Ventilation Connecting Pipe - E70/1 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:402034

Part#: 11157646087

In Stock

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Connects to the valve cover over cylinders 1-4. These pipes tend to crack after become brittle from numerous heating and cooling cycles. If this happens, OEM Rein pipes are a perfect replacement to restore a tight seal and prevent any check engine codes.

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

Rein Turbo Oil Pipe Line - Outlet - BMW B48 B46 Gen1

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:27638777

Part#: 11427617535

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Prevent oil leaks and ensure oil is properly drained from the turbo with a brand new oil drain pipe from Rein

BMW Power Steering Pully - 32427830838

T#:45757458

Part#: 32427830838

In Stock

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A new power steering pulley is key to keeping your steering system smooth and reliable. Over time, pulleys can warp, crack, or wear, causing belt slippage, whining noises, or even pump failure. Installing a fresh pulley restores correct belt alignment, eliminates noise, and maintains consistent hydraulic pressure for precise, effortless steering. Why choose a new pulley? Smooth operation – Ensures proper belt tension for dependable pump performance. Noise reduction – Eliminates squealing, whining, or vibration from worn pulleys. System protection – Protects the pump and steering components from damage. Install a new pulley and keep your steering system running quietly, efficiently, and confidently.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results