E9X M3 Performance Underdrive Pulley Kit

T#:593749

Part#: 10.00.011

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Fuel Pump

T#:384276

Part#: 16146758736

Back Ordered

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

Includes fuel pump sending unit

URO PCV Breather Hose Kit - E39, E46, E83

T#:592719

Part#: BMM54PCVKIT

In Stock

$ 117.99 USD

Add to Wish List

Qty

$ 117.99 USD

Add to Wish List

Comes with everything needed to refresh the PCV System!

Low Pressure Fuel Pump - N52 N54 N55 3.0L

T#:588782

Part#: 16147163298

In Stock

$ 158.99 USD

Add to Wish List

Qty

$ 158.99 USD

Add to Wish List

For BMW owners facing issues with their gas gauge or experiencing fuel pump failure, this replacement is the ideal solution.

Restores accurate gas gauge readings
Addresses fuel pump failure effectively
Direct replacement for seamless installation
Ensures reliable fuel level monitoring
Compatible with various BMW models

Ensure your BMW's fuel system stays in top condition with this reliable replacement, providing accurate gas gauge readings and resolving fuel pump issues.

Show More Show Less

URO Solenoid Valve - 11368605123 - N55 N63 S63

T#:2181335

Part#: 11368605123

In Stock

$ 109.24 USD

Add to Wish List

Qty

$ 109.24 USD

Add to Wish List

If your VANOS solenoid has failed, you could experience a poor running condition as well as a loss of power. Two required per car.

BMW E30 E36 M20 M42 Fuel Pump - Assembly

T#:375456

Part#: 16141184022

In Stock

$ 170.99 USD

Add to Wish List

Qty

$ 170.99 USD

Add to Wish List

Includes fuel pump and o-ring

Friction Wheel N12 N14 N16 N18 1.6L Engine

T#:591689

Part#: 11287598833

In Stock

$ 84.99 USD

Add to Wish List

Qty

$ 84.99 USD

Add to Wish List

Friction Wheel for MINI N12 N14 N16 N18 1.6L Engine - URO

Upgrade your MINI's engine with the Friction Wheel for N12 N14 N16 N18 1.6L engine from URO. This friction wheel serves as a vital link between two pulleys, driving the water pump for optimal engine performance. Over time, the bearings in this unit may begin to squeak and fail, making it essential to replace when changing the serpentine belt.

Benefits:

Ensures smooth operation of the water pump
Prevents squeaking bearings for quieter engine performance
Designed for compatibility with N12 N14 N16 N18 1.6L engines
Easy replacement during serpentine belt changes

Show More Show Less

MMX Crank Hub Capture Plate - Black - S55

T#:4552069

Part#: MMR20-1002

Ships in 7 Business Days

$ 187.99 USD

Add to Wish List

Qty

$ 187.99 USD

Add to Wish List

Anyone with a modified S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. This capture plate can be secured to the OEM crank bolt or to MMR's redesigned one-piece crank hub. *Installation recommended by a professional shop or technician.

Show More Show Less

MMR Baffled Sump Plate - N55

Does not fit xDrive Vehicles

T#:4565839

Part#: MMR20-0501

Ships in 3 Business Days

$ 565.00 USD

Add to Wish List

Qty

$ 565.00 USD

Add to Wish List

MMR's Performance sump baffle has been designed from the ground-up to provide effective oil control which both reduces surge and maintains a more constant oil pressure. The N55 engine is prone to oil starvation issues when driven hard on the road and especially when used on track. The T-6061 anodized MMR sump baffle features a total of 7 one-way oil control flaps and specific baffling that MMR has been tested over thousands of miles of track and road use. Unlike other solutions available that require a plate to be welded in, the MMR sump baffle is bolted into place making the addition of the baffle considerably easier and more accessible to install.

Show More Show Less

URO Front Oxygen Sensor - Bank 2 Pre-Cat - E82 E88 135i 1 M Coupe ...

T#:9126159

Part#: 11787558087

In Stock

$ 96.29 USD

Add to Wish List

Qty

$ 96.29 USD

Add to Wish List

This direct fit OEM Bosch oxygen sensor plugs directly into your factory connector. Fits N54 engine 1 series, 3 series and Z4. No cutting or splicing required. A new oxygen sensor can improve drivability and lengthen engine life.

Show More Show Less

DSC Pressure Sensor

T#:567281

Part#: 34521164458

In Stock

$ 152.99 USD

Add to Wish List

Qty

$ 152.99 USD

Add to Wish List

This sensor is attached to the brake master cylinder

Crankshaft Pulley

T#:591616

Part#: 11281735358

Ships in 1 Business Day

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

Reduces vibrations and connects accessories

URO Valve Cover Kit - E82 128i, E9X 328i, E60 528i, E70 X5 3.0si, E83...

T#:395230

Part#: 11127552281

Ships in 1 Business Day

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

All-in-one valve cover overhaul Preventative replacement saves time and trouble later on Includes new oil separator system Replace valve cover gaskets before a leak becomes worse Replace valve cover before it cracks For the 2007 model year BMW switched to a plastic valve cover on the N51 and N52 engines. As we have seen over time the plastic can crack which leads to oil leaks, vacuum leaks, poor running, and other issues. Unfortunately, it's not just the gasket that needs periodic replacement but the entire valve cover itself. This kit includes a new valve cover, gaskets, eccentric shaft seal, and hardware. The valve cover also incorporates the oil separator which is not a replaceable item on its own. So a complete valve cover replacement will tackle multiple problem areas at once. The valve cover is the same for N51 SULEV and N52 engines. Cracked Valve Cover. The plastic used for the N52 valve cover is thin and weak in certain spots. This makes it prone to hairline or larger cracks that will leak oil and cause vacuum leaks. You might also notice rough running, especially at idle. Often a technician will go looking for a failed ignition coil, spark plug, or failed vacuum hose on the engine. And without a fault code to assist in diagnosis this can often mean wasted time and money. A cracked valve cover is a new problem area that many techs don't think to check. Oil Separator/Crankcase Vent. BMW integrated the oil separator system into the valve cover on these later engines. An internal manifold creates a cyclone effect and centrifugal force separates vapor from the liquid oil. The liquid oil is supposed to drain through the valve cover and back to the oil pan while the remaining vapor is burned up during combustion. It's a very efficient and environmentally-friendly design with very few moving parts. Unfortunately it's not perfect and eventually the internal passageways will become clogged. This problem is made worse in cars that have short drive cycles, sit for long periods of time, do not have frequent oil changes, do not see regular runs to redline, and cars in freezing climates. If the engine never reaches optimal operating temp the oil remains in liquid form or becomes sludge. This is bad news for the entire engine, leading to fouled spark plugs, rough running and misfires and even premature failure of catalytic converters and oxygen sensors. Since the oil separator system in the valve cover is not available on its own, and cleaning it is nearly impossible, the complete replacement of the valve cover is the only option. Other oil vent tubes and vacuum hoses are also recommended to get replaced at the same time. Valve Cover Gaskets. As with any rubber part, failures occur when the rubber becomes dry and brittle. The pliable rubber no longer forms a seal between the cylinder head and valve cover where it will develop an oil leak. Valve cover gaskets that leak can allow oil to seep into the spark plug holes and contaminate ignition coil boots and plugs. That can lead to rough running and misfires. A new valve cover includes new gaskets. Eccentric Shaft Seal. The seal for the eccentric shaft sensor is a known spot for oil leaks. When the seal to the valve cover fails oil can end up in the sensor itself and ruin the sensor (an unecessary $300 expense). Usually a new seal (o-ring) will stop the leaks but sometimes the valve cover is at fault too. A new eccentric shaft seal is included. All new hardware is included to avoid re-using and over-tightening the original bolts (they have a very low torque rating). Replacement requires accessing the rear of the engine with a lot of the upper plastic shrouding removed. The vent hose on the valve cover should be replaced as it is almost always broken anyway (#11157559528). The metal fuel line must also be removed and disconnected from the fuel injectors. Professional installation is encouraged if you have never done this kind of work before. Serious DIY types should have a Bentley Service Manual to use which greatly explains the process. You may also want to combine this work with the oil filter housing gasket replacement. There is no maintenance or replacement interval for the N52 valve cover. However, we have seen cracks and other failures in the 50,000-90,000 mile range. Our best advice is to plan on a major top end overhaul around the 70-80,000 mile mark. There's no mechanical downside to replacing it as prevention and it will make the engine run better and last longer. This item fits the following BMWs: 2008-2012 E82 BMW 128i 2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan 2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon 2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe 2007-2013 E93 BMW 328i - Convertible 2008-2010 E60 BMW 528i 528xi 528i xDrive 2011 F10 BMW 528i 2007-2010 E83 BMW X3 3.0i X3 3.0si 2007-2008 E70 BMW X5 3.0si 2007-2008 E85 BMW Z4 3.0i Z4 3.0si 2009-2010 Z4 BMW Z4 sDrive30i

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

Fuel Pump

T#:384686

Part#: 16146752368

Back Ordered

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

Does not include level sensor or sending unit.

MMX Performance Billet Aluminum S65 VANOS Covers - E9X M3 S65 ...

T#:44529374

Part#: MMR03-2001

Ships in 2 Business Days

$ 514.99 USD

Add to Wish List

Qty

$ 514.99 USD

Add to Wish List

Replace your factory plastic VANOS covers with these Billet Aluminum covers from MMX Performance for long term peace of mind

URO Valley Pan With High Performance Gasket - M60 M62

T#:361970

Part#: 11141742042

In Stock

$ 72.75 USD

Add to Wish List

Qty

$ 72.75 USD

Add to Wish List

If your vehicle has started leaking coolant around the intake area and it is not the pipes, it is probably the valley pan.

This URO replacement has a high temperature and chemical resistant FKM Fluorocarbon Viton® rubber gasket to reduce the chance of leaks and increase the life of the gasket. This valley pan also features a gasket retention step to keep the gasket in place during installation and also reduce the chance of the gasket blowing out from pressure.

Show More Show Less

URO Valvetronic Camshaft Adjusting Unit - BMW N52 3.0L

T#:8677205

Part#: 11377548388

In Stock

$ 137.99 USD

Add to Wish List

Qty

$ 137.99 USD

Add to Wish List

This new Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this quality URO replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds 24-Month Unlimited Mileage Warranty

Show More Show Less

Uro Engine Oil Pan - E30 M20

T#:6795787

Part#: 11131720754

In Stock

$ 308.99 USD

Add to Wish List

Qty

$ 308.99 USD

Add to Wish List

Manufactured to OE dimensions for proper clearance and fitment guaranteed. High-strength construction ensures a warp-free seal between oil pan and engine block with a durable surface coating.

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

T#:45039725

Part#: MMR20-1004FK

Ships in 3 Business Days

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

Valve Cover - Left

T#:583194

Part#: 11127522159

Ships in 1 Business Day

$ 195.37 USD

Add to Wish List

Qty

$ 195.37 USD

Add to Wish List

Valve cover for N62 V8, left bank, Cylinders 5-8 Includes gaskets and bolts.

T#:373117

Part#: 16141182842

Ships in 1 Business Day

$ 116.99 USD

Add to Wish List

Qty

$ 116.99 USD

Add to Wish List

Includes O-Ring & fuel pump sending unit

MMX Oil Filter Housing - Black

T#:4552065

Part#: MMR03-0101-BL

Ships in 1 Business Day

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

URO Oxygen Sensor - Priced Each

T#:8741231

Part#: 11787576673

In Stock

$ 104.63 USD

Add to Wish List

Qty

$ 104.63 USD

Add to Wish List

MINI N18 Engine Valve Cover With PCV

T#:599579

Part#: 11127646552

In Stock

$ 195.45 USD

Add to Wish List

Qty

$ 195.45 USD

Add to Wish List

MINI N18 Engine Valve Cover With PCV addresses two common issues: check engine light codes and oily leaks from the top of the valve cover. This replacement valve cover features a black exterior without a front cover or MINI wings logo, effectively replacing damaged or cracked covers. It ensures that engine oil remains contained and prevents dirt from entering.

Dual Functionality: Resolves check engine light issues and prevents oil leaks from the valve cover.
Integrated PCV Valve: Helps prevent excessive oil consumption, carbon build-ups, and recurring check engine light problems.
Complete Kit: Includes valve cover gasket, spark plug tube seals, installation bolts, and oil cap with seal.
High-Quality Construction: An OES supplier part designed for reliable performance and a perfect fit.

Show More Show Less

URO Oil Separator Valve - BMW E60 E90 Z4 N52

T#:592960

Part#: 11617531423

In Stock

$ 57.12 USD

Add to Wish List

Qty

$ 57.12 USD

Add to Wish List

he crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate.

Show More Show Less

URO Fuel Pump Assembly - E46 Non-M

T#:373294

Part#: 16146766942

In Stock

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

A failing fuel pump has many potential symptoms, including:

hard starting cold or after a heat soak
an illuminated check engine light
engine misfire under load or when cold
stalling
no-start.

Show More Show Less

Part#: 11127563474

In Stock

$ 202.28 USD

Add to Wish List

Qty

$ 202.28 USD

Add to Wish List

Valve cover for N62 V8, right bank, Cylinders 1-4 Includes gasket and bolts.

Sneed4Speed R56 MINI Engine Rod Bearing - Standard Size - N14 / N16 /...

T#:14551946

Part#: NSRBS

In Stock

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

Sneed4Speed R56 Mini Engine Rod Bearing for N14, N16, N18 1.6L Engine

Upgrade your Mini's engine performance with Sneed4Speed's R56 Mini Engine Rod Bearing, tailored specifically for N14, N16, N18 1.6L engines. Crafted from top-grade materials, these bearings guarantee exceptional performance and durability.

Optimized for N14, N16, N18 1.6L engines
Enhances overall engine performance
Durable construction for long-lasting reliability
Precision engineering ensures a perfect fit

Show More Show Less

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

URO VVT Adjustment Unit - Exhaust Camshaft - BMW N52 N55 S55 3.0L ...

T#:7530051

Part#: 11367583208

In Stock

$ 201.99 USD

Add to Wish List

Qty

$ 201.99 USD

Add to Wish List

This timing chain camshaft gear controls the camshaft position and timing and is located toward the front of the engine. Located on the exhaust side of the engine at the front end of the exhaust camshaft. Sometimes changed when replacing the timing chain. T#34658 may also be required when servicing this part.

Show More Show Less

Passenger Side Fuel Sending Unit

T#:5471090

Part#: 16141152266

In Stock

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Fuel sending unit, found in your vehicle's fuel tank, on the side with the fuel pump.

N54 Valve Cover

T#:399428

Part#: 11127565284

In Stock

Sale - Save 20% $ 285.66

This product was last offered at the strikethrough price on
05-15-2026

$ 229.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 285.66

This product was last offered at the strikethrough price on
05-15-2026

$ 229.19 USD

Add to Wish List

With more than 4,000 European vehicle replacement parts, URO is no stranger to the market. Superior metal stock and extremely strict quality control are at the forefront of URO’s agenda and it shows as they become the OE supplier for more and more car companies every single day.

Show More Show Less

MINI R53 Valve Cover Without MINI Label

T#:600487

Part#: 11128658461

In Stock

$ 178.42

This product was last offered at the strikethrough price on
03-17-2026

$ 153.98 USD

Add to Wish List

Qty

$ 153.98 USD

Add to Wish List

MINI R53 Valve Cover Without MINI Label is an excellent replacement for the factory valve cover on your MINI. Featuring a sleek black exterior, this cover does not include the MINI logo, which is sold separately. It is designed to replace damaged or cracked valve covers, effectively keeping engine oil contained and preventing dirt from entering the engine.

Compatible Fit: Designed for R50, R52, and R53 Gen 1 engines, both supercharged and non-supercharged.
Complete Kit: Includes valve cover gasket, spark plug tube seals, and preloaded with valve cover screws and bolts.
Additional Components: Comes with an oil cap and seal for easy installation.
PCV Valve Compatibility: Suitable for screw-in style PCV valves (ES#18656); verify existing PCV valve type before purchasing.

This valve cover ensures a reliable seal and protection for your engine, maintaining optimal performance.

Show More Show Less

Spark Plug Wires Set

T#:591858

Part#: 12121720529

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Includes ignition coil wire and conduit

Part#: R56S4SROD

Ships in 9 Business Days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Sneed4Speed proudly presents their Forged H Beam Connecting Rods, tailored to fit R56, R55, R57, R58, R59, R60, and R61 MINIs equipped with the N14 and N18 engines. Crafted from resilient 4340 forged steel, these connecting rods are built to withstand the demands of high-performance engines, boasting a remarkable 700 horsepower rating. This makes them a superb choice for budget-conscious builders aiming to achieve significant power gains.

What sets these connecting rods apart is their direct fit and replacement design, ensuring a straightforward installation process for MINI enthusiasts. But that's not all – these rods come backed by an extraordinary 100-year warranty, providing unparalleled peace of mind to vehicle owners.

Furthermore, the kit includes high-quality chrome moly rod bolts, rated at an impressive 180,000 psi, capable of supporting up to 1000 horsepower. Elevate your MINI's performance and reliability with Sneed4Speed's Forged H Beam Connecting Rods.

Show More Show Less