BMW Engine Parts

CSF "No Limit" Billet Air-to-Air Competition Manifold - BMW G2X, G4X,...

Lead time may vary, call for availability.

T#:52375807

Part#: CSF8401B58

Ships in 3 Business Days

$ 3,995.00 USD

Add to Wish List

Qty

$ 3,995.00 USD

Add to Wish List

The CSF "No Limit" Billet Manifold brings world-record-setting technology to the BMW B58 (Gen 1 & 2) and Toyota GR Supra platforms.

CSF "No Limit" Billet Air-to-Air Competition Manifold - BMW F9X X3M/X...

Lead time may vary, call for availability.

T#:52375803

Part#: CSF8402S58

Ships in 3 Business Days

$ 3,995.00 USD

Add to Wish List

Qty

$ 3,995.00 USD

Add to Wish List

This "No Limit" manifold from CSF is engineered for extreme-duty drag racing and high-horsepower builds aiming to surpass the 1500 WHP mark.

Second Fuel Rail Kit for CSF B58 & S58 Air-to-Air Billet Manifolds ...

T#:56001929

Part#: CSF8404

Ships in 3 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Eliminate fuel starvation on your high boost S58 or B58 build with this track engineered, billet aluminum secondary port injection rail built to handle extreme fueling demands.

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

Supercharger Kit Level 1 - E46 328 '99-'02

For model years 1999-2002 ~ Call in to provide vin before purchase

T#:50899197

Part#: 12-016M438

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 with the Active Autowerke 328i Supercharger Kit. Engineered to work seamlessly with your factory ECU and 91 to 93 octane pump fuel, this system uses dyno developed software to precisely manage ignition timing, fueling, VANOS, and rev limits through the stock DME. The result is smooth, repeatable power delivery with OEM-like drivability and the ability to return the vehicle to stock if desired. A self contained oil cooling system keeps installation clean without interfering with the factory oil circuit. For E46 owners looking to approach M3 level performance without the full swap, this complete bolt-on solution delivers substantial gains with proven reliability. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum charge tubing Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete hardware and illustrated instructions 1 year warranty with tech support Performance Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost: 8.0 PSI

Show More Show Less

Supercharger Kit Level 1 - E46 3330i

For model years 1999-2002 ~ Call in to provide vin before purchase

T#:50899198

Part#: 12-016M430

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 330i with the Active Autowerke Supercharger Kit. Designed to deliver a significant horsepower increase without sacrificing daily usability, this system operates safely on 91 to 93 octane pump fuel and integrates directly with the factory ECU. Active Autowerke’s dyno developed calibration manages ignition timing, fueling, VANOS function, and rev limits through the stock DME for consistent, predictable results. Power delivery remains smooth and repeatable with OEM like drivability, and the system can be returned to stock configuration if needed. The included self contained oil cooling circuit keeps installation straightforward without modifying the factory oil system. For E46 owners seeking a complete, well engineered bolt on solution, this kit offers substantial, reliable gains. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount oil cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum tubing for improved flow Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete mounting hardware, plumbing, hoses, and clamps Illustrated installation manual and guide 1 year warranty with technical support Performance Specifications Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost Level: 8.0 PSI

Show More Show Less

Supercharger Kit Level 1 - E46 330 2003+

For model years 2003+ ~ Call in to provide vin before purchase

T#:50899201

Part#: 12-016M45

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 330i with the Active Autowerke Supercharger Kit. Designed to deliver a significant horsepower increase without sacrificing daily usability, this system operates safely on 91 to 93 octane pump fuel and integrates directly with the factory ECU. Active Autowerke’s dyno developed calibration manages ignition timing, fueling, VANOS function, and rev limits through the stock DME for consistent, predictable results. Power delivery remains smooth and repeatable with OEM like drivability, and the system can be returned to stock configuration if needed. The included self contained oil cooling circuit keeps installation straightforward without modifying the factory oil system. For E46 owners seeking a complete, well engineered bolt on solution, this kit offers substantial, reliable gains. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount oil cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum tubing for improved flow Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete mounting hardware, plumbing, hoses, and clamps Illustrated installation manual and guide 1 year warranty with technical support Performance Specifications Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost Level: 8.0 PSI

Show More Show Less

PRIMA Supercharger Kit (Non-Intercooled) - E46 M3

For SMG Transmissions Only ~ Call in to provide vin before purchase

T#:50899202

Part#: 12-021S

Ships in 10 Business Days

$ 8,906.00 USD

Add to Wish List

Qty

$ 8,906.00 USD

Add to Wish List

Co-developed with Frank Smith of TuningTechFS, the Active Autowerke PRIMA Supercharger Kit delivers a proven entry point into forced induction for the E46 M3. The system is engineered around efficiency, repeatability, and upgrade potential, with a baseline configuration that can grow beyond 500 WHP through available Level 1 and Level 2 packages. PRIMA focuses on clean, practical design. This is a fully bolt-on, non intercooled setup that installs without custom fabrication and can be reverted to stock if required. The modular architecture also allows straightforward progression to higher output configurations. As expected from Active Autowerke, the kit enhances overall performance while preserving the sharp throttle response and balanced character of the S54-powered M3. PRIMA Supercharger Kit Key Features Rotrex C38-92 supercharger assembly Active Autowerke GEN 9 intake manifold plenum Active Autowerke dual blow off valve configuration Active Autowerke green performance filter with cover Alpha N calibration with SIMON 4 interface included High capacity fuel injectors Colder heat range spark plugs Dedicated self contained oil cooling circuit Pre assembled hoses, clamps, and installation hardware Compatible with Level 1 and Level 2 upgrade paths Baseline Dynojet Results Boost: 5.8 PSI Stock Power: 285.4 WHP @ 7500 RPM Stock Torque: 232.36 lb ft @ 5250 RPM Supercharged Power: 426.69 WHP @ 8150 RPM Supercharged Torque: 297.99 lb ft @ 7200 RPM

Show More Show Less

Power Pulley DPK Belt Kit

For vehicles with production date from 6/2008

T#:50934275

Part#: 13-001D

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Free Up Real S65 Power — Engineered the Turner Way Your S65 is already making the power. This kit simply lets you keep more of it. The Active Autowerke Power Pulley Kit for the BMW E9X M3 reduces parasitic drag at the crankshaft, trimming rotational mass and freeing up horsepower that would otherwise be consumed by accessory drive load. The result is a measurable increase in rear-wheel output without sacrificing the balance, cooling capacity, or long-term durability expected from a properly engineered BMW upgrade. The crank pulley is CNC-machined from billet 6061 aluminum and finished with a hard-coat anodize for durability under sustained high-RPM operation. Unlike undersized pulleys that compromise system function, this design maintains proper operating characteristics while delivering real-world gains. Late-2007 production E9X M3 models transitioned to a double-sided (DPK) A/C belt configuration. Rather than forcing a workaround, Active Autowerke developed a proper DPK-compatible solution — including the correct matched belt. Applicable kits also include a spare DPK belt for added insurance. Dyno testing on a Mustang chassis dyno confirms gains of 10–12+ rear-wheel horsepower on an otherwise stock vehicle. Installation is fully reversible and requires no permanent modification. Product Highlights 10–12+ RWHP gain verified on stock S65 engines Complete bolt-on system CNC-machined 6061 billet aluminum crank pulley Hard-coat anodized finish for durability Includes correct replacement drive and A/C belts Spare DPK belt included where applicable Compatible with manual and DCT-equipped E9X M3 Reduces parasitic drag and rotational mass Designed to maintain proper operating temperatures Works in conjunction with Active Autowerke performance software Available for single-sided and double-sided (DPK) belt configurations Fitment Information Confirm whether your E9X M3 is equipped with a single-sided or double-sided (DPK) A/C belt prior to ordering to ensure correct application. A properly engineered solution for enthusiasts who want measurable gains while preserving OEM-level refinement and reliability.

Show More Show Less

E46 M3 Prima Plus + Supercharger With 600HP Upgrade Kit

For SMG Transmissions Only ~ Call in to provide vin before purchase

T#:50934251

Part#: V12-035S

Ships in 10 Business Days

$ 10,449.00 USD

Add to Wish List

Qty

$ 10,449.00 USD

Add to Wish List

As producer of one of the finest working supercharger systems for the BMW E46 M3, Active Autowerke is proud to introduce the PRIMA PLUS supercharger system capable of exceeding 500 WHP running on pump drawn 93 octane. The PRIMA PLUS is an upgrade kit to the existing PRIMA supercharger system designed to create MORE horsepower.

Show More Show Less

Rotrex C38 Supercharger Kit - Level 1 (OBD2)

For OBD2 vehicles w/ Automatic Transmission Only

T#:50899186

Part#: 12-003A

Ships in 10 Business Days

$ 8,074.00 USD

Add to Wish List

Qty

$ 8,074.00 USD

Add to Wish List

360HP/300TQ - a complete power solution for your M3!

Precision Raceworks High Flow Direct Injectors - BMW S58 & B58 Gen2 3...

T#:50521401

Part#: 201-0485

Ships in 9 Business Days

$ 2,099.00 USD

Add to Wish List

Qty

$ 2,099.00 USD

Add to Wish List

Precision Raceworks' upgraded S58/B58 Direct Injectors directly replace your factory injectors, offering 26% more fuel flow than stock S58 injectors and 60% more flow than stock B58 Gen 2 injectors

Precision Raceworks B58 Upgraded Hybrid Fuel Pump - Stage 2.5 - BMW G...

T#:50521412

Part#: 622-0298

Ships in 9 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

The Stage 2.5 bucketed/bucketless hybrid fuel pump kit includes all necessary components to quickly and easily upgrade your stock pump. This pump kit utilizes the OEM brushless pump in the bucket and adds a Walbro 525 (F90000285) fuel pump outside the bucket. Rated for 950whp on pump gas and 900 whp on 100% E85

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

CSF "No Limit" Billet Air-to-Air Competition Manifold - BMW G2X, G4X,...

CSF "No Limit" Billet Air-to-Air Competition Manifold - BMW F9X X3M/X...

Second Fuel Rail Kit for CSF B58 & S58 Air-to-Air Billet Manifolds ...

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Supercharger Kit Level 1 - E46 328 '99-'02

Supercharger Kit Level 1 - E46 3330i

Supercharger Kit Level 1 - E46 330 2003+

PRIMA Supercharger Kit (Non-Intercooled) - E46 M3

Power Pulley DPK Belt Kit

E46 M3 Prima Plus + Supercharger With 600HP Upgrade Kit

Rotrex C38 Supercharger Kit - Level 1 (OBD2)

Precision Raceworks High Flow Direct Injectors - BMW S58 & B58 Gen2 3...

Precision Raceworks B58 Upgraded Hybrid Fuel Pump - Stage 2.5 - BMW G...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results