Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:
VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/B58TU/B58TU2) & S58 3.0L
VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...
Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
In Stock
New Item
$ 29.99 USD
Free Shipping
Add to Wish List
$ 29.99 USD
Free Shipping
Add to Wish List
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less
Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5
Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 4 Business Days
New Item
$ 31.99 USD
Free Shipping
Add to Wish List
$ 31.99 USD
Free Shipping
Add to Wish List
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.
Blue Thermostat Caps (pair)
Blue Thermostat Caps (pair)
Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 2 Business Days
New Item
$ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 29.00 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A90 G2 B58
BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...
Burger Motorsports - Corporate Logo
T#:49822554
Part#: BMSB58OCCFCDV
Ships on Sep 1, 2026
New Item
$ 139.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 139.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design
Show More Show Less
Red B58 BMW Coil Upgrade Adapter Kit - N55
Red B58 BMW Coil Upgrade Adapter Kit - N55
Burger Motorsports - Corporate Logo
T#:57086690
Part#: BMSN55CUAK-R
Ships on Sep 1, 2026
New Item
$ 199.00 USD
Add to Wish List
$ 199.00 USD
Add to Wish List
Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.
Show More Show Less
Blue B58 BMW Coil Upgrade Adapter Kit - N55
Blue B58 BMW Coil Upgrade Adapter Kit - N55
Burger Motorsports - Corporate Logo
T#:49857415
Part#: BMSN55CUAK
Back Ordered
New Item
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity. Why Upgrade: While the N55 is a reliable platform, factory coils can struggle under high boost, heat, and load. B58 coils deliver stronger, more consistent spark, and this adapter kit ensures a clean, OEM-quality integration. Features & Benefits: Direct-fit adapter harness & mounts for straightforward B58 coil installation Plug-and-play design — no cutting, splicing, or permanent modifications Secure coil seating & alignment for consistent performance and reliability Improved ignition stability under high-load or tuned conditions, helping reduce misfires Applications: Stage 1–3 N55 builds, turbo upgrades, ethanol blends, track use, and aggressive daily driving Drivers looking to eliminate heat- and boost-related ignition issues Anyone seeking an OEM+ quality coil upgrade without a messy DIY install Result: A clean, professional installation that modernizes your ignition system and delivers reliable spark performance under all conditions. If you provide the kit’s brand/part number and whether your valve cover is stock or aftermarket, I can refine this description for precise fitment and application.
Show More Show Less
VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID
VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...
Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships on Aug 31, 2026
New Item
$ 37.99 USD
Free Shipping
Add to Wish List
$ 37.99 USD
Free Shipping
Add to Wish List
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.
Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, S55
Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...
Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
Add to Wish List
$ 59.99 USD
Free Shipping
Add to Wish List
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.
JB4PRO Flex Fuel Add On Harness - B58/S58
JB4PRO Flex Fuel Add On Harness - B58/S58
Burger Motorsports - Corporate Logo
T#:49822568
Part#: JB4PB58FFAOH
In Stock
New Item
$ 49.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.
Show More Show Less
Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58
Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...
Vargas Turbo Technologies - Corporate Logo
T#:51778123
Part#: VTT-S58-SINGLE-H
In Stock
New Item
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.
O-Ring - Priced Each
O-Ring - Priced Each
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Elring - Corporate Logo
T#:27838469
Part#: 11317507432
In Stock
Sale - Save 67% $ 2.99

This product was last offered at the strikethrough price on
05-15-2026

$ 0.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 67%
$ 2.99

This product was last offered at the strikethrough price on
05-15-2026

$ 0.99 USD
Free Shipping on orders $49 and up
Add to Wish List
KING Coated & Graded GPC Racing Connecting Rod Bearing Set - BMW S85 5.0L V10
KING Coated & Graded GPC Racing Connecting Rod Bearing Set - BMW S85 ...
NEW FROM KING - PRE-ORDER NOW! Expected ETA of Mid-April
King - Corporate Logo
T#:51110164
Part#: CR1057GPC-STDX
In Stock
New Item
13% off MSRP $ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 436.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
13% off MSRP
$ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 436.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!
Show More Show Less
Vargas Oil Feed Adapter - BMW N54
Vargas Oil Feed Adapter - BMW N54
Vargas Turbo Technologies - Corporate Logo
T#:51778141
Part#: VTT-N54-OFA
In Stock
New Item
$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.
King Racing - BMW S65 GPC Coated Rod Bearings (STD) - E9X M3
King Racing - BMW S65 GPC Coated Rod Bearings (STD) - E9X M3 ...
King - Corporate Logo
T#:51110167
Part#: CR8066GPC
In Stock
New Item
13% off MSRP $ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
13% off MSRP
$ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
GPC Coated standard rod bearing set for BMW E90, E92, and E93 M3 equipped with the S65 V8 engine. Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!
Show More Show Less
KING Coated & Graded GPC Racing Connecting Rod Bearing Set - Standard Size - BMW S85 5.0L V10
KING Coated & Graded GPC Racing Connecting Rod Bearing Set - Standard...
NEW FROM KING - PRE-ORDER NOW! Expected ETA of Mid-April
King - Corporate Logo
T#:51110163
Part#: CR1057GPC
In Stock
New Item
44% off MSRP $ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping on orders $49 and up
Add to Wish List
44% off MSRP
$ 885.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 499.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!
Show More Show Less
King Racing - BMW S65 GPC Coated Rod Bearings (STDX) - E9X M3
King Racing - BMW S65 GPC Coated Rod Bearings (STDX) - E9X M3 ...
King - Corporate Logo
T#:51110168
Part#: CR8066GPC-STDX
In Stock
New Item
13% off MSRP $ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
13% off MSRP
$ 708.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 356.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Add to Wish List
GPC Coated standard rod bearing set for BMW E90, E92, and E93 M3 equipped with the S65 V8 engine. Eliminate the S65 and S85 rod bearing clearance issues with King’s precision-graded GPC kits, the only solution engineered to handle a massive 17,000 PSI. By combining individually measured shells with a silver-based tri-metal structure and ceramic nano-coating, these bearings deliver the perfect oil clearances and extreme-load protection your M-Engine demands. Don’t just replace your bearings, upgrade to the industry’s highest standard of lubrication and high-RPM durability from King Engine Bearings!
Show More Show Less
Engine Valve Cover Gasket
Engine Valve Cover Gasket
Elring - Corporate Logo
T#:54852024
Part#: B46.360
In Stock
New Item
$ 48.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 48.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep your B46 engine running at peak efficiency and free of messy oil leaks with this premium replacement valve cover gasket from Elring.
Turbo & Intake Heat Shield - Gen2 B58
Turbo & Intake Heat Shield - Gen2 B58
Burger Motorsports - Corporate Logo
T#:49857413
Part#: BMSG2B58THS
Ships on Sep 1, 2026
New Item
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Turbo & Intake Heat Shield - Gen1 B58
Turbo & Intake Heat Shield - Gen1 B58
Burger Motorsports - Corporate Logo
T#:49857410
Part#: BMSB58THS
Ships on Sep 1, 2026
New Item
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 119.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Blue B58 BMW Coil Upgrade Adapter Kit - N54
Blue B58 BMW Coil Upgrade Adapter Kit - N54
Burger Motorsports - Corporate Logo
T#:49857414
Part#: BMSN54CUAK
Ships on Sep 1, 2026
New Item
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Modernize your N54 ignition system with this N54 to B58 Coil Upgrade Adapter Kit, engineered to deliver an OEM-quality conversion for improved spark energy and consistency. Designed to pair B58-style pencil coils with the factory N54 engine harness, this kit provides a clean, reversible installation—no cutting, splicing, or guesswork required. Key Features & Benefits: Direct-fit adapter solution to run B58 coils on N54 applications Plug-and-play wiring integrates with the factory N54 harness for a factory-like install Secure coil positioning helps ensure proper seating and reliable long-term fitment Improved ignition stability under higher cylinder pressures—ideal for tuned, higher-boost setups Clean, serviceable conversion that maintains a tidy engine bay and simplifies future maintenance Ideal For: Stock to heavily modified N54 builds Vehicles running elevated boost, ethanol blends, or upgraded turbo systems Owners looking to reduce ignition-related misfires and improve combustion consistency under load If you share the brand/part number of the kit and which coils you’re pairing it with, I can tailor the write-up to match the exact components and fitment notes.
Show More Show Less
Elring Actuator Gasket - R55, R56, R57, R58, R59, R60, R61
Elring Actuator Gasket - R55, R56, R57, R58, R59, R60, R61
Elring - Corporate Logo
T#:54388490
Part#: 11127560273
Ships in 2 Business Days
New Item
$ 7.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 7.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Leaky valvetronic actuator gaskets are a rite of passage for modern BMW owners, but they don't have to sideline your ultimate driving machine. When that factory seal gets brittle from track days and daily commutes alike, oil starts weeping down the valve cover, creating a mess and potentially fouling critical sensors.
Show More Show Less
Intensity Lithium-ION Battery - i34RX - 11.5lbs
Intensity Lithium-ION Battery - i34RX - 11.5lbs
Braille - Corporate Logo
T#:54388454
Part#: I34RX
Ships in 7 Business Days
New Item
$ 949.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 949.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Whether you're building a dedicated track weapon or upgrading your street machine for ultimate reliability, unsprung and upper-chassis weight is the enemy of performance. Positioned high up in the engine bay or rear corners, a heavy factory battery negatively impacts your car's center of gravity.
Show More Show Less
SNEED4SPEED MINI Cooper W11 Performance Engine - Super Sport 53SSCE
SNEED4SPEED MINI Cooper W11 Performance Engine - Super Sport 53SSCE ...
Sneed4Speed - Corporate Logo
T#:54388498
Part#: 2028215
Ships in 2 Business Days
New Item
$ 8,295.00 USD
Add to Wish List
$ 8,295.00 USD
Add to Wish List
Rebuilt performance engines that are great for the street to track level
Radium - Split-Flow Flex Fuel Sensor Adapter
Radium - Split-Flow Flex Fuel Sensor Adapter
Radium Engineering - Corporate Logo
T#:53290958
Part#: 20-0589
In Stock at Vendor
New Item
$ 99.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 99.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Vargas Billet Motor Mount Inserts - BMW F2X/F3X N55 & B58
Vargas Billet Motor Mount Inserts - BMW F2X/F3X N55 & B58
Vargas Turbo Technologies - Corporate Logo
T#:51918869
Part#: VTT-INSERT-6
Ships on Aug 31, 2026
New Item
$ 474.99 USD
Free Shipping
Add to Wish List
$ 474.99 USD
Free Shipping
Add to Wish List
The Vargas Billet Motor Mount Insert Kit is for BMW owners who want to eliminate the factory engine movement without the vibrations of a solid mount.
Vargas Billet Motor Mount Inserts - BMW F8X M3, M4
Vargas Billet Motor Mount Inserts - BMW F8X M3, M4
Vargas Turbo Technologies - Corporate Logo
T#:51918873
Part#: VTT-INSERT-7
Ships on Aug 31, 2026
New Item
$ 474.99 USD
Free Shipping
Add to Wish List
$ 474.99 USD
Free Shipping
Add to Wish List
The VTT F8X S55 kit offers a comprehensive refresh by providing brand-new OEM mounts equipped with VTT’s signature billet inserts.
VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ports
VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...
Vargas Turbo Technologies - Corporate Logo
T#:52270288
Part#: OCC1DUADRAVAL
Ships on Aug 31, 2026
New Item
$ 53.99 USD
Free Shipping
Add to Wish List
$ 53.99 USD
Free Shipping
Add to Wish List
Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.
Vargas Coil Hold Down Kit - Clear Coat - BMW N54
Vargas Coil Hold Down Kit - Clear Coat - BMW N54
Vargas Turbo Technologies - Corporate Logo
T#:51918877
Part#: VTT-N54CBRAW
Ships on Aug 31, 2026
New Item
$ 112.99 USD
Free Shipping
Add to Wish List
$ 112.99 USD
Free Shipping
Add to Wish List
Upgrade your N54 engine bay with the VTT Stock Style Coil Hold-Down Kit, the ultimate marriage of form and function.
Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, S55, S58
Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...
Vargas Turbo Technologies - Corporate Logo
T#:52094591
Part#: VTT-FAB-062
Ships on Aug 31, 2026
New Item
$ 53.99 USD
Free Shipping
Add to Wish List
$ 53.99 USD
Free Shipping
Add to Wish List
If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.
Vargas Coil Hold Down Kit - Gold - BMW N54
Vargas Coil Hold Down Kit - Gold - BMW N54
Vargas Turbo Technologies - Corporate Logo
T#:51918876
Part#: VTT-N54CBGOLD
Ships on Aug 31, 2026
New Item
$ 112.99 USD
Free Shipping
Add to Wish List
$ 112.99 USD
Free Shipping
Add to Wish List
Upgrade your N54 engine bay with the VTT Stock Style Coil Hold Down Kit in Billet Gold.
Vargas Crank/Vibration Damper Bolts - M10 x 1.5
Vargas Crank/Vibration Damper Bolts - M10 x 1.5
Vargas Turbo Technologies - Corporate Logo
T#:51778130
Part#: VTT-BMW-DAMPER-B
Ships on Aug 31, 2026
New Item
$ 157.99 USD
Free Shipping
Add to Wish List
$ 157.99 USD
Free Shipping
Add to Wish List
Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.
Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW
Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...
Vargas Turbo Technologies - Corporate Logo
T#:52094552
Part#: VTT-DCS-EWG-W-AC
Ships on Aug 31, 2026
New Item
$ 1,049.99 USD
Free Shipping
Add to Wish List
$ 1,049.99 USD
Free Shipping
Add to Wish List
the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.
Vargas Modular Catch Can Kit - Single Can, Stock PCV - BMW E9X, E8X N54
Vargas Modular Catch Can Kit - Single Can, Stock PCV - BMW E9X, E8X N...
Vargas Turbo Technologies - Corporate Logo
T#:52270289
Part#: OCC2SCSP
Ships on Aug 31, 2026
New Item
$ 311.99 USD
Free Shipping
Add to Wish List
$ 311.99 USD
Free Shipping
Add to Wish List
This VTT Modular Catch Can kit is the ultimate solution for N54 owners looking to improve their engine’s health without overcomplicating their setup.
VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU, B48, B46
VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...
Vargas Turbo Technologies - Corporate Logo
T#:52270290
Part#: OC16OADAPSC
Ships on Aug 31, 2026
New Item
$ 64.99 USD
Free Shipping
Add to Wish List
$ 64.99 USD
Free Shipping
Add to Wish List
Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.
Vargas Cylinder Head Outlet Coolant Adapter - BMW N54
Vargas Cylinder Head Outlet Coolant Adapter - BMW N54
Vargas Turbo Technologies - Corporate Logo
T#:51813338
Part#: VTT-N54-CAO
Ships on Aug 31, 2026
New Item
$ 31.99 USD
Free Shipping
Add to Wish List
$ 31.99 USD
Free Shipping
Add to Wish List
Engineered for high-performance BMW builds, the Vargas Coolant Adapter replaces the weak factory plastic neck located at the front of the cylinder head.
Vargas Billet Oil Cooler Adapter Fittings - BMW G80 M3, G82 M4, G83 M4, G87 M2.
Vargas Billet Oil Cooler Adapter Fittings - BMW G80 M3, G82 M4, G83 M...
Vargas Turbo Technologies - Corporate Logo
T#:51778119
Part#: VTT-G8X-OILCOOLE
Ships on Aug 31, 2026
New Item
$ 109.00 USD
Free Shipping
Add to Wish List
$ 109.00 USD
Free Shipping
Add to Wish List
The VTT G8X Billet Oil Cooler Adapter Fittings are the essential building blocks for any custom S58 oiling project.
Vargas Billet Solid Engine Mounts - BMW G8X M2/M3/M4
Vargas Billet Solid Engine Mounts - BMW G8X M2/M3/M4
Vargas Turbo Technologies - Corporate Logo
T#:51672722
Part#: VTT-G8X-SOLID-MO
Ships on Aug 31, 2026
New Item
$ 524.99 USD
Free Shipping
Add to Wish List
$ 524.99 USD
Free Shipping
Add to Wish List
The VTT Billet Solid Engine Mounts are the ultimate solution for G8X owners looking to extract every ounce of performance from their S58-powered machines.
VTT F-RB+ Turbocharger - BMW N54 335i LHD
VTT F-RB+ Turbocharger - BMW N54 335i LHD
Vargas Turbo Technologies - Corporate Logo
T#:52270283
Part#: N54-FRBPLUS
Ships on Aug 31, 2026
New Item
$ 3,479.99 USD
Free Shipping
Add to Wish List
$ 3,479.99 USD
Free Shipping
Add to Wish List
The Vargas N54 F-RB+ kit is a ground-up re-engineering of the iconic "GC" line, focusing on thermal efficiency and structural longevity.
Vargas High Flow Catch Can System - BMW G8X M2, M3, M4
Vargas High Flow Catch Can System - BMW G8X M2, M3, M4
Vargas Turbo Technologies - Corporate Logo
T#:51918850
Part#: VTT-HFCCG8X16
Ships on Aug 31, 2026
New Item
$ 649.00 USD
Free Shipping
Add to Wish List
$ 649.00 USD
Free Shipping
Add to Wish List
The Vargas G8X High-Flow -16 Catch Can System is a ground-up solution specifically engineered for high-horsepower BMW G80 M3, G82/G83 M4, and G87 M2 builds.
Vargas Modular Dual Catch Can/PCV - BMW N54
Vargas Modular Dual Catch Can/PCV - BMW N54
Vargas Turbo Technologies - Corporate Logo
T#:51778135
Part#: VTT-OCC-1-DUALCA
Ships on Aug 31, 2026
New Item
$ 270.99 USD
Free Shipping
Add to Wish List
$ 270.99 USD
Free Shipping
Add to Wish List
If you want to take the guesswork out of plumbing a complex PCV system, the VTT "Ready-to-Install" Dual Catch Can Kit is the definitive answer.
Vargas GC+ Turbocharger Upgrade - BMW F90 M5, F9X M8
Vargas GC+ Turbocharger Upgrade - BMW F90 M5, F9X M8
Vargas Turbo Technologies - Corporate Logo
T#:52270238
Part#: VTT-F90-GC+
Ships on Aug 31, 2026
New Item
$ 6,299.99 USD
Free Shipping
Add to Wish List
$ 6,299.99 USD
Free Shipping
Add to Wish List
The VTT GC+ Turbocharger Upgrade is the ultimate solution for BMW F9X owners looking to push the absolute limits of the S63TU4 engine.
Timing Cover Gasket
Timing Cover Gasket
Elring - Corporate Logo
T#:54388514
Part#: 11127566281
In Stock at Vendor
New Item
$ 8.99

This product was last offered at the strikethrough price on
06-16-2026

$ 7.03 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 7.03 USD
Free Shipping on orders $49 and up
Add to Wish List
Engineered for precision and reliability under demanding conditions. Whether you are maintaining a daily driven Ultimate Driving Machine or prepping your chassis for the next track day, maintaining proper engine sealing is critical to preventing vacuum leaks and oil pressure loss.
Show More Show Less
Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S63
Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...
Vargas Turbo Technologies - Corporate Logo
T#:51672717
Part#: VTT-MAP-HARNESS
Ships on Aug 31, 2026
New Item
$ 59.99 USD
Free Shipping
Add to Wish List
$ 59.99 USD
Free Shipping
Add to Wish List
As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.
VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/B58TU2)
VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...
Vargas Turbo Technologies - Corporate Logo
T#:49822558
Part#: VTTB58CHECK
Ships on Aug 31, 2026
New Item
$ 69.99 USD
Free Shipping
Add to Wish List
$ 69.99 USD
Free Shipping
Add to Wish List
The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
Show More Show Less
Vargas GCMAX Turbocharger Upgrade Kit - BMW F8X S55
Vargas GCMAX Turbocharger Upgrade Kit - BMW F8X S55
Vargas Turbo Technologies - Corporate Logo
T#:51778127
Part#: VTT-S55-GCMAX
Ships on Aug 31, 2026
New Item
$ 5,249.99 USD
Free Shipping
Add to Wish List
$ 5,249.99 USD
Free Shipping
Add to Wish List
Vargas Turbo Technologies has completely overhauled the S55 turbocharger architecture with the GC-MAX kit, focusing on internal aerodynamics and thermal durability.
Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT, GTX, G-Series
Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...
Vargas Turbo Technologies - Corporate Logo
T#:52094592
Part#: VTT-FAB-063
Ships on Aug 31, 2026
New Item
$ 53.99 USD
Free Shipping
Add to Wish List
$ 53.99 USD
Free Shipping
Add to Wish List
Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.
Vargas Silicone Inlet Pipes - Black - BMW G8X M2, M3, M4
Vargas Silicone Inlet Pipes - Black - BMW G8X M2, M3, M4
Vargas Turbo Technologies - Corporate Logo
T#:52164907
Part#: S58INTPBLK
Ships on Aug 31, 2026
New Item
$ 444.99 USD
Free Shipping
Add to Wish List
$ 444.99 USD
Free Shipping
Add to Wish List
Upgrade your S58’s reliability and power with the VTT Silicone Inlet Pipe Kit.
Vargas Billet Cylinder Head Outlet Adapter - Black - BMW N54/N55
Vargas Billet Cylinder Head Outlet Adapter - Black - BMW N54/N55 ...
Vargas Turbo Technologies - Corporate Logo
T#:51918879
Part#: VTT-COOLADBLK
Ships on Aug 31, 2026
New Item
$ 31.99 USD
Free Shipping
Add to Wish List
$ 31.99 USD
Free Shipping
Add to Wish List
The Vargas Billet Cylinder Head Outlet Adapter is the definitive solution for one of the most common failure points on the BMW N54 and N55 engines.
Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT/GTX40+
Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...
Vargas Turbo Technologies - Corporate Logo
T#:52129710
Part#: VTT-FAB-081
Ships on Aug 31, 2026
New Item
$ 59.99 USD
Free Shipping
Add to Wish List
$ 59.99 USD
Free Shipping
Add to Wish List
Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.
Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F9X S58
Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F...
Vargas Turbo Technologies - Corporate Logo
T#:52164930
Part#: S58PIBLORAIL
Ships on Aug 31, 2026
New Item
$ 222.99 USD
Free Shipping
Add to Wish List
$ 222.99 USD
Free Shipping
Add to Wish List
Maximize the versatility of your BMW S58 fuel system with the Vargas Turbo Technologies Port Injection Block Off Kit with Rail.

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping