BMW Engine Parts

BMW S65 4.0L Vanos Covers 7075 - QTY 4

T#:20749249

Part#: VTT-S65-VANOS-CO

In Stock

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

BMW S65 4.0L Vanos Covers 7075 provide a robust replacement for the factory plastic covers, which are known to fail over time. These high-performance Vanos covers snap on securely, offering a precise fit to eliminate vibration and prevent chafing of the engagement dogs.

High-Strength Construction: Machined from premium 7075 aluminum for superior durability and strength.
Corrosion Resistance: Anodized finish ensures long-lasting protection against corrosion.
Perfect Fitment: Designed for an exact fit to avoid issues such as vibration and chafing.
No Timing Tools Required: Easy installation with no need for engine timing tools.

Show More Show Less

Vitesco Fuel Injector With Seal Ring - Index 12 - BMW N54 N63 S63 ...

T#:30629652

Part#: 13538616079

In Stock

12% off MSRP $ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 495.99 USD

Add to Wish List

Qty

12% off MSRP

$ 560.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 495.99 USD

Add to Wish List

If you are experiencing a rough idle, misfire, or check engine light, this could be the problem. Earlier fuel injectors for the N54 have been a common failure item, this is the most up to date injector for the N54 engine. It is highly recommended to replace older injectors also if your car is modified or you plan to modify it. Important information to consider when replacing injectors: It is recommended to replace at least 3 injectors at a time, replacing all injectors in a cylinder bank, instead of mixing and matching. If ALL injectors in a bank are index 11 or greater, injectors may be replaced individually with a new injector. If your stock injectors are index 10 or less, all 3 injectors per bank must be replaced. For V8s, all four in that bank must be replaced. Vehicles with old injector 7585261 will need to inspect their existing injectors to determine if these can be replaced individually. Replacement also requires 13537564751 for each injector.

Show More Show Less

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

VTT S65 Billet Spark Plug Tubes

T#:29566613

Part#: VTT-S65-TUBE

Ships in 6 Business Days

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

Tired of oil leaks from your plastic OEM S65 spark plug tubes? So were we, so we did something about it! VTT Anodized billet 6061 Aluminum S65 spark plug tubes. We took the OEM tubes and redesigned them. Then machined them out of billet 6061, anodized them in black, and added a US-made Viton O-ring with more surface area to ensure a leak-free connection for the life of your S65 that will not break down over time. These are the perfect to upgrade when doing a VC replacement, or upgrading to VTT Billet S65 VCs! These are available in sets of 8. Kit includes: 8 S65 Billet Spark Plug Tubes

Show More Show Less

Supertech Upgraded Valve Stem Seal Kit - BMW S54 S52 S50 M54 M52 M50 ...

T#:641030

Part#: VS-VBM6-6CYLKT

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Includes a full set of polyacrylic intake and viton exhaust valve stem seals! Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT N54 Crank Bolt Capture - N54

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Supertech Performance Intake Valve - BMW M50 M52

T#:302459

Part#: BMIVN-1030

Ships in 8 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Supertech valves are some of the best on the market, made from one piece of forged stainless steel for the ultimate in strength and durability. Supertech valves go through a special heat treatment process that obtains the right amount of harness for each engine to ensure the ultimate valve for your performance motor. These valves are hardened black nitrided, which is most popular in European and Japanese motors.

Show More Show Less

Supertech Performance Exhaust Valve - BMW M50 M52

T#:640219

Part#: BMEVN-1030S

Ships in 8 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Supertech valves are some of the best on the market, made from one piece of forged stainless steel for the ultimate in strength and durability. Supertech valves go through a special heat treatment process that obtains the right amount of harness for each engine to ensure the ultimate valve for your performance motor. These valves are hardened black nitrided, which is most popular in European and Japanese motors.

Show More Show Less

Vitesco Technologies MAP Sensor - BMW N20 N26 S55 S63

T#:39059260

Part#: 13627843531

In Stock

$ 93.99

This product was last offered at the strikethrough price on
06-28-2026

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

This is a replacement Manifold Absolute Pressure sensor Located on the charge air cooler. The MAP controls the amount of fuel that goes through the injectors based on the pressure of air at the intake manifold. If your vehicle is giving you a MAP code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAP is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAP sensor likely needs to be replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.

Show More Show Less

VTT Gen-1 PCV CAP - B58

T#:4813265

Part#: VTT-B58-PCV-CAP

Back Ordered

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

MINI N14 N18 77.00mm Piston Ring Kit GNH7700

T#:594815

Part#: GNH7700

Back Ordered

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Enhance the performance of your MINI N14 or N18 engine with the MINI N14 N18 77.00mm Piston Ring Kit GNH7700. This high-quality piston ring kit is designed to provide optimal sealing and durability for your engine, ensuring smooth operation and reliable performance.

Specifically designed for MINI N14 and N18 engines
Features a diameter of 77.00mm for precise fitment
Ensures optimal sealing to prevent oil leakage and maintain compression
Durable construction for long-lasting performance and reliability

Show More Show Less

Supertech Single Groove Exhaust Valve - Priced Each

T#:21472889

Part#: BMEVI-1055S-HS

Ships in 4 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Single Groove sodium filled exhaust valves for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

Supertech Intake Valve - Priced Each

T#:18302506

Part#: MCIVN-1200S

Ships on Sep 3, 2026

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

MINI R56 N14 CRYO Race Timing Chain Kit MINI S 2007-2010, JCW 2009-20...

T#:584196

Part#: 1828312C

In Stock

$ 239.99 USD

Add to Wish List

Qty

$ 239.99 USD

Add to Wish List

VTT N54 Turbocharger install kit

T#:398464

Part#: VTT-N54-INSTL

In Stock

$ 244.99 USD

Add to Wish List

Qty

$ 244.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Vitesco Fuel Injector Replacement Kit - Index 12 - BMW N54

T#:33479594

Part#: 13538616079V1KT

In Stock

$ 3,089.99 USD

Add to Wish List

Qty

$ 3,089.99 USD

Add to Wish List

The N54 fuel injector (13538616079) is a high-precision component designed to deliver fuel efficiently to the engine, ensuring optimal combustion and performance. It plays a key role in maintaining the N54's power output and fuel economy. Regular maintenance or replacement is essential, as worn injectors can lead to misfires, rough idling, or reduced performance. Ideal for enthusiasts looking to keep their N54 engine running smoothly.

Show More Show Less

SuperTech Dual Valve Spring Upgrade Kit w/ Steel Retainers - 80lbs - ...

T#:26038568

Part#: SPRKH1000DBMST

In Stock

20% off MSRP $ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD

Add to Wish List

Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy, these valve springs offer exceptional performance and durability even at high RPMs. CAD engineering ensures that the wire stress levels remain within defined limits for long-lasting durability, even under extreme racing conditions. Advanced computer software allows Supertech to meticulously control harmonics, ensuring optimal performance. Manufactured with high-quality military-certified Steel, the retainers are CNC machined to provide a precise fit, guaranteeing longevity and reliability.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

T#:7530040

Part#: VACUUMCANBLUE

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x

T#:5309605

Part#: VTT-COIL-N5X-BLU

Ships in 10 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Clear - BMW...

T#:7530039

Part#: VACUUMCANRAW

Ships in 1 Business Day

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

VTT Billet Power Steering Pulley - N54

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

E36 M3, 325i, 328i Supertech High Performance Valve Spring Set ...

T#:1504

Part#: TMS1504

Ships in 5 Business Days

$ 766.99 USD

Add to Wish List

Qty

$ 766.99 USD

Add to Wish List

For M50, M52, M54 S50 and S52 engines, these valve springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for high performance and durability at high rpms, with better memory. These are extremely high quality, offered at the best price.

Computer designed to ensure that the wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme racing conditions. Computer software allows Supertech to make sure that the harmonics are well under control.

The retainers are manufactured with high quality military certified Titanium alloy, CNC machined for a tight fit that will ensure a long durability.

This item fits the following BMWs:
1993-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x

T#:5309610

Part#: VTT-COIL-N5X-RED

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

BMW N54 3.0L High Boost Head Gasket - Copper Ring

T#:21604315

Part#: HG-BMW-N54

Ships in 6 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

BMW N54 3.0L High Boost Head Gasket - Copper Ring is designed for high-performance applications where boosting power is essential. This copper ring head gasket ensures a reliable seal under extreme conditions, making it ideal for high boost N54 engine builds. The 1.5mm thickness and 86mm bore size provide a precise fit and optimal performance.

High-Boost Performance: Ideal for N54 engine builds requiring high boost levels.
Durable Material: Made from high-quality copper ring material for a robust seal.
Optimal Thickness: 1.5mm thickness ensures reliable performance under extreme conditions.
Precise Fit: 86mm bore size fits perfectly with the N54 engine specifications.
Enhanced Reliability: Designed to handle increased pressure and heat for better engine performance.

Upgrade your BMW N54 engine with this high boost copper ring head gasket to achieve exceptional reliability and performance.

Show More Show Less

BMW M42 M50 M52 M54 6mm Single Groove Valve Keeper - Set Of 24 ...

T#:21604313

Part#: KPR-6S-7-24

Ships in 6 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

BMW M42 M50 M52 M54 6mm Single Groove Valve Keeper is a precision-engineered component essential for securing valves in BMW engines. Turner Motorsport offers this high-quality valve keeper, designed to fit specific Supertech valves for enhanced performance and reliability.

Precision Fit: Designed specifically for BMW M42, M50, M52, and M54 engines, ensuring a perfect fit with 6.0mm single groove valves.
High-Quality Construction: Made from durable materials to withstand high-pressure conditions and provide long-lasting performance.
Enhanced Valve Security: Two keepers are required per valve to securely hold the valve in place, preventing movement and ensuring consistent engine performance.
Compatibility: Ideal for use with certain Supertech valves, providing a reliable solution for engine builds and upgrades.
Easy Installation: Simple to install with standard tools, offering a hassle-free upgrade or replacement option.

Show More Show Less

Supertech Valve Spring Kit - BMW S65 Engine

T#:4908057

Part#: ST-VSK-S65

Ships in 7 Business Days

$ 469.99 USD

Add to Wish List

Qty

$ 469.99 USD

Add to Wish List

Revitalize your BMW S65 engine's performance with Supertech Beehive Valve Springs – a reliable solution to the common issue of valve spring breakage. Designed as an economical yet high-quality alternative, these valve springs are the perfect complement to Stage 1 and Stage 2 cylinder heads.

Enhanced Durability: Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy.
High-Performance Design: Withstands high rpms for improved engine performance.
Better Memory: Ensures consistent performance under extreme conditions.
Precision Engineering: Computer-designed to manage wire stress levels and harmonics.
Complementary Upgrade: Ideal for use with Stage 1 and Stage 2 cylinder heads.

Upgrade your BMW S65 engine with Supertech Beehive Valve Springs for reliable and durable performance.

Show More Show Less

Fuel Pump - High Pressure

T#:38351603

Part#: 13517588879

In Stock

$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

R56-R61 N18/N12/N16 CRYO Race Timing Chain Kit MINI

T#:7718954

Part#: 1828313C

In Stock

$ 239.99 USD

Add to Wish List

Qty

$ 239.99 USD

Add to Wish List

Elevate the performance of your BMW MINI S 2011-2015/JCW 2013-2015, and MINI Cooper (NON S) 2007-2015 engines with the Cryogenic Hardened Race N18/N12/N16 Engine Timing Chain Set by Sneed4Speed. Specifically designed for high-performance track and race engines, this set includes a super-strength Cryogenic-hardened timing chain, heavy-duty plastic guides, and a high-strength tensioner. Engineered to withstand track and race conditions, these components also function effectively on the street. Standard equipment in Sneed4Speed Super Sport and Race engines, this set offers durability and reliability.

Cryogenic-hardened timing chain for enhanced strength
Heavy-duty plastic guides for durability
High-strength tensioner built for track and race use
Suitable for high-performance track and race engines
Compatible with street use

Show More Show Less

W11 77.50mm Piston Ring Kit GNH7750

T#:23284068

Part#: GNH7750

Ships on Sep 9, 2026

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Experience top-tier performance with Supertech Piston Rings, meticulously crafted in Japan using advanced technology. Engineered for high-performance applications, these piston rings are specifically designed to optimize engine performance in BMW vehicles.

Manufactured in Japan with cutting-edge technology for superior quality
Specifically designed for high-performance applications
Ideal for ensuring peak engine performance in BMW vehicles
Four sets required for a complete engine overhaul

Show More Show Less

Vitesco Mass Air Flow Sensor - N55, N52

T#:33512934

Part#: 13627593624

In Stock

$ 210.99 USD

Add to Wish List

Qty

$ 210.99 USD

Add to Wish List

The MAF of your vehicle decides the quantity of fuel that is fed to the injectors according to the volume of air coming through the intake.

Vargas B58 Gen 1 One Way Crankcase Breather - F Chassis B58 3.0L ...

For Gen1 B58 Engines

T#:638800

Part#: VTT-B58-BREATHER

Ships in 1-2 days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5″ tall from the valve cover oil cap area, and the filter is 2-3/4″ in diameter NOTE: NOT ALL THE B58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

B58TU / B48TU One Way Crankcase Breather - G Chassis

For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)

T#:25606657

Part#: VTTB58BREATHERTU

In Stock

$ 128.99 USD

Add to Wish List

Qty

$ 128.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

BMW N55 Turbocharger install kit

T#:398463

Part#: VTT-N55-INSTL

Ships in 1 Business Day

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

VTT Billet BMW Crankcase Breather - Screw In - BMW N54 N55 3.0L ...

FOR MODELS WITH VTT BILLET VALVE COVER ONLY

T#:38924625

Part#: VTT-CRANKBREATHE

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. This breather can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including most aftermarket oil catch can systems! The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

5mm Single Groove Valve Keeper - Set Of 24

T#:21604314

Part#: KPR-5.0-7S-24

In Stock

$ 72.99

This product was last offered at the strikethrough price on
08-13-2026

$ 67.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 72.99

This product was last offered at the strikethrough price on
08-13-2026

$ 67.99 USD

Limited Qty Sale

Add to Wish List

Two required per valve, for use with certain supertech valves 5.0mm single groove

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

VTT Billet N54/N55 Vacuum/Boost Adapter - Basic Kit

T#:600097

Part#: N5455VACADAP-BK

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The Vacuum Boost Adapter from Vargas Turbos Tehcnologies is an easy way to get a boost source with out having to make irreversible changes to your intake manifold! These go inline to the throttle body and provide a full boost/vacuum signal from the manifold. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold.

Show More Show Less

Supertech High Performance Valve Spring Set - E36 M3, 325i, 328i - Ti...

T#:302460

Part#: SPRK-H1000DBM

Ships in 5 Business Days

$ 787.99 USD

Add to Wish List

Qty

$ 787.99 USD

Add to Wish List

Supertech Spring / Retainer kits are precision matched sets for a complete valvetrain overhaul. Developed for the performance enthusiast that wants the best the industry has to offer, Supertech Spring / Retainer kits are second to none in terms of performance, quality and value.

Show More Show Less

Supertech Exhaust Valve - Priced Each

T#:18302505

Part#: MCEVI-1200-HS

Ships in 6 Business Days

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Black - BMW...

T#:7530037

Part#: VACUUMCANBLK

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

BMW N54 3.0L Wastegate Rattle Fix Repair Kit

T#:398014

Part#: VTT-N54-WF2

Ships on Sep 1, 2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

VTT N54 Waste Gate Repair Kit / Rattle Fix Tired of the annoying N54 Wastegate Rattle? Turbos still going strong, but can't deal with the embarrassing rattle anymore? We have the perfect kit for you. This kit comes with 1 set (both turbos) of Stainless Steel wear matched bushing, and flapper assembly, Wastegate arm, rod end, and Stainless steel 8mm C clip. These parts custom made for VTT upgrade the flapper assembly to a full 12.6MM or 1/2" flapper arm, and bushing compared to the stock 11.5mm. They also get rid of the 6mm rod end connection to a full 8mm connection with a stainless steel C clip. There is no better N54 Waste Gate upgrade on the market, and guess what? We also offer them for less than other upgrades which use the stock bushing size, rod end, and inferior materials. If you want to fix this right the first time, this is the kit for you! *Please note, assembly is required. This kit can only be installed with the turbos removed from the vehicle, and stock wastegate assembly removed from the housing. The new assemblies will need to be pressed in, then welded by a qualified welder. We offer no warranty, or returns for improperly installed wastegate assemblies.

Show More Show Less

Vargas S58 One Way Crankcase Breather - BMW S58 3.0L

T#:697896

Part#: VTT-S58-BREATHER

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW S58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all S58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter NOTE: NOT ALL THE S58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results