Find Parts That Fit Your Vehicle

Turbos

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!
Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
CTS - Corporate Logo
T#:50899212
Part#: HW-446
Ships in 7 Business Days
New Item
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.
Show More Show Less

Forge - Corporate Logo
T#:589672
Part#: FMTUBL4
Ships in 4 Business Days
$ 187.99 USD
Free Shipping on orders $49 and up
**The turbo blanket can change color hue due to production batches ** It has not been installed or run prior. The Forge Motorsport FMTUBL4 has been specifically designed for the MINI R55-R61 Cooper S/JCW stock turbo charger. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The stock MINI heat shield is inadequate and can result in warping the standard air scoop located in the bonnet. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500 °f of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket. It can also change color due to heat cycles.
Show More Show Less

CTS - Corporate Logo
T#:5788138
Part#: CTS-TR-0300
Back Ordered
$ 1,499.99 USD
Free Shipping
$ 1,499.99 USD
Free Shipping
If you looking to get the best daily-driven power and torque out of your N54, this is the kit for you! CTS Turbo is proud to announce their standard Stage 2 500 BMW N54 turbocharger kit. Using larger wheels than stock these turbos are good for 550-600hp, with a good low-end torque and excellent boost response, without sacrificing the top end. Features: 6-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2″ compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2 turbos is required No core required, complete new units
Show More Show Less
CTS - Corporate Logo
T#:23615499
Part#: CTS-HS-160
Back Ordered
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping

Protect your Mini with the Turbo Heat Shield, an essential accessory to prevent hood paint discoloration, scoop warping, and underhood heat damage caused by excessive turbocharger heat. Additionally, it enhances the underhood appearance of your MINI. This metal plate mounts to factory points using supplied hardware, effectively reducing the amount of heat that bypasses the factory shield. While not encasing the turbocharger entirely, it serves as a secondary defense, complementing the factory-installed heat shield that isn't fully effective in preventing long-term hood paint and scoop damage.

  • Prevents hood paint discoloration and scoop warping
  • Guards against underhood heat damage caused by excessive turbocharger heat
  • Enhances underhood appearance
  • Mounts to factory points with supplied hardware
  • Acts as a secondary defense in addition to the factory heat shield
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38655170
Part#: BMS-BOVA-G3B58
Back Ordered
$ 99.00 USD
Free Shipping on orders $49 and up
$ 99.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:23880741
Part#: N54STCCPBO
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.
Show More Show Less

CTS - Corporate Logo
T#:27105124
Part#: CTS-TR-0058
Ships in 7 Business Days
$ 3,899.99 USD
Free Shipping
$ 3,899.99 USD
Free Shipping
CTS Turbo is excited to introduce our latest Stage 2+ kit engineered specifically for the BMW S58 platform. Drawing upon our extensive expertise and successful track record in turbo projects, this advanced kit integrates cutting-edge technology to elevate performance while seamlessly preserving factory fitment. Through meticulous transient flow analysis and flow bench testing, our engineers have optimized the twin-scroll turbine housing to enhance performance without compromising stock fitment, location, or the utilization of stock wastegates. This allows for the compatibility with any stock-fitment downpipes, intakes, and charge pipes, resulting in an impressive power output ranging from 825whp to 900whp. Installation is straightforward, enabling the direct transfer of factory wastegates, high-performance downpipes, intake, and charge pipes, with no custom parts required. Moreover, all factory installation hardware and gaskets are retained. Gone are the days of dealing with cores; each turbocharger is delivered brand new, eliminating the inconvenience of core exchanges. Constructed with 316 stainless steel exhaust housings and wastegate components, our turbochargers are VSR balanced to exceed OE tolerances, incorporating upgraded heavy-duty bearings and thrust washers for enhanced durability. Designed to efficiently move significant air at lower boost levels, our turbochargers ensure potent power delivery without compromising reliability by risking turbo over-speeding. Enthusiasts seeking additional performance gains can seamlessly integrate larger turbo inlets with this setup. Key Features: - Brand new turbocharger, eliminating the need for core exchanges - Constructed with 316 stainless steel exhaust housings and wastegate components - VSR balanced to surpass OE tolerances - Includes wire-reinforced silicone turbo inlet - Compatible with factory installation hardware (not included) - Compatible with factory wastegate actuators (not included; original actuators can be used) Fitment: - G80 BMW M3/M3 Competition S58 - G82 BMW M4/M4 Competition S58 - G87 BMW M2 S58 - F97 BMW X3M/X3M Competition - F98 BMW X4M/X4M Competition
Show More Show Less

Forge - Corporate Logo
T#:23449715
Part#: FMR56RDH
Back Ordered
$ 184.99 USD
Free Shipping on orders $49 and up
Elevate your 2007 onwards MINI Cooper S with the Intercooler Resonator delete hose, expertly crafted to replace the OEM hoses and sound resonator. Forge's innovative design enhances torque and horsepower, offering a smoother bore to reduce resistance. When combined with additional modifications such as tuned software or exhaust upgrades, this hose delivers enhanced acceleration. Choose from red, blue, or black options for a durable, stealthy installation capable of withstanding high temperatures and pressures.
Show More Show Less
Forge - Corporate Logo
T#:22756715
Part#: FMICB051
In Stock
$ 78.99 USD
Free Shipping on orders $49 and up
Forge presents a high-quality in-car boost controller, designed to cater to enthusiasts looking to precisely adjust their boost levels from within the comfort of their vehicle. This controller is suitable for use with any turbocharged vehicle equipped with either an internal or external wastegate, provided it operates using vacuum/boost control. Please note that this product includes the controller valve only and does not include lines or connections.
Show More Show Less
CTS - Corporate Logo
T#:8138615
Part#: CTS-TR-1550-82
Ships in 7 Business Days
$ 2,599.99 USD
Free Shipping
$ 2,599.99 USD
Free Shipping
CTS is proud to announce the release of a premium ball-bearing turbo kit with stainless steel exhaust housing for the F2x and F3x BMW platforms equipped with N55 EWG engine. CTS utilized transient flow analysis backed by flow bench testing to optimize turbine housing for a GTX3582R while maintaining stock fitment, stock location, and using the stock waste gate (this is not a stock turbo with a bigger compressor wheel). This allows one to run any stock fitment exhaust downpipe, intake and charge pipe. The result is a factory-location big turbo that is capable of producing over 800hp with supporting mods. You can simply transfer your factory wastegate, your high performance downpipe, intake and charge pipe during the install. No custom parts are needed! Product Details: Complete brand new turbocharger; no need for core to be sent it or purchased GTX3582R-style Gen2 ceramic ball-bearing CHRA (dual ball-bearing) Billet 11 blade compressor wheel Proprietary stainless steel turbine housing, flow matched to the turbocharger VSR Balanced to exceed OE tolerances Oil and water fittings included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuator (not included, use your original wastegate actuator) **BIG TURBO SOFTWARE TUNING IS REQUIRED, FUELING UPGRADES ARE RECOMMENDED.
Show More Show Less


Forge - Corporate Logo
T#:586966
Part#: FMBP3
Ships in 3 Business Days
$ 626.99 USD
Free Shipping on orders $49 and up
BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.
Show More Show Less
CTS - Corporate Logo
T#:23185032
Part#: CTSIT900
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

  • Designed for use with TiAL Q atmospheric blowoff valve
  • Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
  • CNC machined MAP sensor flange for seamless OEM installation
  • Includes 4-ply silicone connectors and stainless steel clamps for secure fit
  • Features two water-methanol bungs and laser-etched CTS Turbo logo
  • Enhances boost holding capacity and provides an aggressive aftermarket sound
Show More Show Less
CTS - Corporate Logo
T#:5802147
Part#: CTS-F20-F30-RACE
Ships in 7 Business Days
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
CTS Turbo is proud to announce their performance intercooler for N20 and N55 powered BMWs. This unique stepped-core design allows for maximum surface area, which optimizes cooling efficiency. Featuring a high-density core and cast aluminum end tanks, this intercooler is just what you need to keep your engine happy and add more power. If you’re interested in maintaining the sleeper look, rest assured this kit is a snap to install and no bumper trimming is required at all. Core size: 21.5' long x 3'/6' thick x 11'/6' tall, HP rating up to 800hp+
Show More Show Less

CTS - Corporate Logo
T#:46031873
Part#: TR-1057
Ships in 7 Business Days
$ 2,099.99 USD
Free Shipping
$ 2,099.99 USD
Free Shipping
BMW B58 Gen1 hybrid turbo designed to deliver maximum performance while maintaining OEM fitment and reliability. Built for enthusiasts looking to extract more power from their B58, this hybrid turbo provides increased airflow and efficiency for higher horsepower and torque gains, supporting 700whp+ with the proper supporting modifications.
Show More Show Less

CTS - Corporate Logo
T#:40072451
Part#: CTSIT900KT
Ships in 7 Business Days
$ 489.99 USD
Free Shipping on orders $49 and up
Dealing with cracked plastic charge pipes or inconsistent boost? This is the upgrade your N54 was built for.
CTS - Corporate Logo
T#:587601
Part#: CTS-F20-F30-DF
Ships in 7 Business Days
$ 449.99 USD
Free Shipping
$ 449.99 USD
Free Shipping
Step up to a more efficient intercooler that will provide better flow and less weight.

CTS - Corporate Logo
T#:5788142
Part#: CTS-TR-0300-RS
Back Ordered
$ 1,699.99 USD
Free Shipping
$ 1,699.99 USD
Free Shipping
CTS Turbo is proud to announce their standard Stage 2+ 700 BMW N54 turbocharger kit. This is the perfect upgrade for those wanting to get the most out of their engine before moving completely to single turbos! Using larger wheels than stock these turbos are good for 600-700hp, with extremely noticeable mid-high range RPM performance. Features: GTX Gen2 11-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2" compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2+ turbos is required No core required, complete new units
Show More Show Less
Forge - Corporate Logo
T#:384539
Part#: FMBH335D
Special Order: No Guaranteed ETA
$ 223.99 USD
Free Shipping on orders $49 and up

Because of where the stock boost hose is located - often leaks go unnoticed. Replace your stock hose that is prone to failure with this 4ply Fluorosilicone hose that is better suited to handle the pressures, temperatures, and withstand total failure caused by oil. Couplers are CNC machined. Following instructions is necessary - if installed incorrectly, the hose will seem too short for its application.

This product fits the following BMWs:
2006-2012 E90 335d

Show More Show Less

Burger Motorsports - Corporate Logo
T#:23880740
Part#: N54STCOCF
Back Ordered
$ 25.00 USD
Free Shipping on orders $49 and up
$ 25.00 USD
Free Shipping on orders $49 and up
Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.
Show More Show Less

Forge - Corporate Logo
T#:31622619
Part#: FMBV050
Ships in 3 Business Days
$ 46.99 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:49857413
Part#: BMSG2B58THS
Ships on Aug 31, 2026
New Item
$ 119.00 USD
Free Shipping on orders $49 and up
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
Forge - Corporate Logo
T#:27638804
Part#: FMICB051 POLISH
Ships in 5 Business Days
$ 69.99 USD
Free Shipping on orders $49 and up


CTS - Corporate Logo
T#:50899213
Part#: HS-360
Ships in 7 Business Days
New Item
15% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD
Free Shipping
15% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD
Free Shipping
Reduces radiant heat from the turbocharger and improves overall performance. Made from high-quality steel, this heat shield provides superior thermal protection, helping to lower intake air temperatures (IATs) and safeguard surrounding components from excessive heat.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:49857410
Part#: BMSB58THS
Ships on Aug 31, 2026
New Item
$ 119.00 USD
Free Shipping on orders $49 and up
Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance
Show More Show Less
CTS - Corporate Logo
T#:20946760
Part#: CTS-TR-0055
Ships in 7 Business Days
$ 3,199.00 USD
Free Shipping
$ 3,199.00 USD
Free Shipping
CTS Turbo is excited to announce the release of our latest Stage 2+ aka the “RS” turbocharger set, designed specifically for the BMW S55 platform. This kit builds on the success and knowledge of the previous turbo projects we have made and incorporates new technology to optimize performance and maintain factory fitment. Our engineers utilized transient flow analysis and flow bench testing to optimize the twin-scroll turbine housing while maintaining stock fitment, stock location, and stock wastegates. This allows for the use of any stock fitment downpipes, intakes, and charge pipes. The result is an impressive 808whp on a built engine with supporting mods. You can simply transfer your factory wastegates, high-performance downpipes, intake, and charge pipes during the installation. No custom parts are needed and all factory installation hardware and gaskets are used! The kit features complete brand-new turbochargers and large inlet pipes. No need for cores to be sent in or purchased. Each turbocharger is VSR balanced to exceed OE tolerances with upgraded heavy-duty bearings and thrust washers. We supply reinforced silicone inlets, that are compatible with any intake system. These inlets will not collapse or deform under vacuum. Our turbochargers are designed to move a lot of air at lower boost levels, which means you can make some serious power without over-speeding the turbos, which means reliable performance. Optimal boost levels are 24-25psi with approximately 85-88% WGDC. This must be confirmed by your tuner and adjusted, depending on your build. Features: Complete brand new turbocharger; no need for core to be sent it or purchased Bolt-on journal bearing CHRA with HD bearings, turbine shaft diameter increased by 0.5mm and thrust surface increased by 2mm Billet 8 blade compressor wheel, 47.4mm inducer, 58mm exducer with 63.10mm extended tip design 9 blade Mar-M 246 Superalloy turbine wheel, 52mm inducer, 45.6mm exducer, high-flow 316 stainless steel exhaust housings and wastegate components VSR Balanced to exceed OE tolerances Wire-reinforced silicone turbo inlet included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuators (not included, use your original wastegate actuators) Fitment: 2015 – 2020 BMW M3 and BMW M4 with S55 engine (F80, F82, F83) 2018 – 2021 BMW M2C and BMW M2CS with S55 engine (F87) NOTE: Installation and tuning must be performed by a qualified professional. Wastegate actuators MUST be calibrated using ISTA+ software before tuning.
Show More Show Less


CTS - Corporate Logo
T#:23185030
Part#: CTSIT910
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
The kit offers an OEM like fit, with an aggressive aftermarket sound.
CTS - Corporate Logo
T#:23185024
Part#: CTS-BV-0015
Ships in 7 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping

CTS - Corporate Logo
T#:44326104
Part#: TR-1059
Special Order: No Guaranteed ETA
$ 2,599.99 USD
Free Shipping
$ 2,599.99 USD
Free Shipping
Supra owners can transform their BMW B58 engine into a true performance powerhouse, combining cutting-edge turbo technology with the quality and dependability that dedicated drivers demand.