Turbos

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 230i/330i/430i B46/B48 ...

T#:50899212

Part#: HW-446

Ships in 7 Business Days

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Billet Boost Tap

T#:54388425

Part#: TS-BT-F56

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Specifically designed for the Gen3 engine to add a port for vacuum / boost reference

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

CTS Turbo B58 Turbo Heat Shield - BMW F-series/G-series B58 (B58A/B58...

T#:50899213

Part#: HS-360

Ships in 7 Business Days

15% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Qty

15% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 127.99 USD

Add to Wish List

Reduces radiant heat from the turbocharger and improves overall performance. Made from high-quality steel, this heat shield provides superior thermal protection, helping to lower intake air temperatures (IATs) and safeguard surrounding components from excessive heat.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Aug 31, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

VTT F-RB+ Turbocharger - BMW N54 335i LHD

T#:52270283

Part#: N54-FRBPLUS

Ships in 10 Business Days

$ 3,479.99 USD

Add to Wish List

Qty

$ 3,479.99 USD

Add to Wish List

The Vargas N54 F-RB+ kit is a ground-up re-engineering of the iconic "GC" line, focusing on thermal efficiency and structural longevity.

Vargas GC+ Turbocharger Upgrade - BMW F90 M5, F9X M8

T#:52270238

Part#: VTT-F90-GC+

Ships in 10 Business Days

$ 6,299.99 USD

Add to Wish List

Qty

$ 6,299.99 USD

Add to Wish List

The VTT GC+ Turbocharger Upgrade is the ultimate solution for BMW F9X owners looking to push the absolute limits of the S63TU4 engine.

Vargas GCMAX Turbocharger Upgrade Kit - BMW F8X S55

T#:51778127

Part#: VTT-S55-GCMAX

Ships in 10 Business Days

$ 5,249.99 USD

Add to Wish List

Qty

$ 5,249.99 USD

Add to Wish List

Vargas Turbo Technologies has completely overhauled the S55 turbocharger architecture with the GC-MAX kit, focusing on internal aerodynamics and thermal durability.

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

Vargas Silicone Inlet Pipes - Black - BMW G8X M2, M3, M4

T#:52164907

Part#: S58INTPBLK

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Upgrade your S58’s reliability and power with the VTT Silicone Inlet Pipe Kit.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 RHD ...

T#:52270267

Part#: GCLRHDBLK

Ships in 10 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

For the N54 enthusiast who demands race-car power without sacrificing the daily-driver feel, the VTT GC-Lite 2.0 is the definitive choice.

VTT F-RB Turbocharger - BMW N54 E9X 335i LHD

T#:52270282

Part#: N54-FRB-1

Ships in 10 Business Days

$ 3,199.99 USD

Add to Wish List

Qty

$ 3,199.99 USD

Add to Wish List

The VTT N54 F-RB Turbocharger Kit is the ultimate solution for 335i LHD owners who refuse to compromise between daily driveability and track-shredding power.

VTT Turbocharger Inlet Flange - 2" Sch 10 - Garrett G25/G30/G35 ...

T#:52270239

Part#: GARING25

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Unlock the full potential of your Garrett G-Series turbocharger with the VTT-FAB Precision Inlet Flange.

Vargas GC-Mid Turbocharger Upgrade - BMW B58 TU 2-port

T#:52305479

Part#: B58-GCMID-2

Ships in 10 Business Days

$ 2,409.99 USD

Add to Wish List

Qty

$ 2,409.99 USD

Add to Wish List

Engineered specifically for the B58TU 2-port platform, the VTT GC-Mid (Game Changer - Mid) focuses on volumetric efficiency and thermal management.

Vargas GC Turbocharger Upgrade - BMW F9X M5, M8

T#:51672716

Part#: VTT-F90-GC

Ships in 10 Business Days

$ 5,519.99 USD

Add to Wish List

Qty

$ 5,519.99 USD

Add to Wish List

The Vargas Turbo Technologies "GC" (Game Changer) is a ground-up re-engineering of the BMW S63R turbocharger system.

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...

T#:52129707

Part#: VTT-FAB-064

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.

Vargas Single Piece Silicone Cold Side Charge Pipe - BOV HKS - BMW EX...

T#:52270294

Part#: SILCPN54HKS2

Ships in 10 Business Days

$ 464.99 USD

Add to Wish List

Qty

$ 464.99 USD

Add to Wish List

Upgrade your N54’s breathing capabilities with the VTT Silicone Charge Pipe, specifically configured for enthusiasts running an HKS BOV.

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 335i ...

T#:52270256

Part#: GCLI335LHDBLK

Ships in 10 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

The VTT N54 GC-Lite 2.0 is the solution for BMW 335i owners seeking a massive jump in power without sacrificing the rapid response of the factory setup.

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 135, 53...

T#:52270248

Part#: GCL135BLA

Ships in 10 Business Days

$ 2,789.99 USD

Add to Wish List

Qty

$ 2,789.99 USD

Add to Wish List

For N54 owners looking to replace aging factory units or seeking a reliable path to high horsepower, the VTT GC-Lite 2.0 is the ultimate "stock location" solution.

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

Vargas Stage 3 VTT VTX-R60 - Black - BMW N54 "Limited Fitment" ...

T#:52305462

Part#: S32VTXR60BK

Ships in 10 Business Days

$ 10,859.99 USD

Add to Wish List

Qty

$ 10,859.99 USD

Add to Wish List

Transform your BMW into a true street or track monster with the VTT N54 Stage 3 VTX-R Twin Turbo Kit.

Vargas Front Coolant Plug - BMW N54

T#:51778142

Part#: VTT-N54-FCP

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Vargas Front Coolant Plug is specifically engineered to provide a leak-free solution for blocking off the unused front water ports on the engine block.

Vargas Turbo Front Drain -10 AN Adapter - BMW N54

T#:51672703

Part#: VTTSINGLEN54ADAP

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

The VTT N54 Front Drain Adapter is the definitive solution for professional-grade oil management on the BMW N54 platform.

Vargas Stage 3 VTT VTX-R63 - Black - BMW N54 "Limited Fitment" ...

T#:52305463

Part#: S32VTXR63BK

Ships in 10 Business Days

$ 10,859.99 USD

Add to Wish List

Qty

$ 10,859.99 USD

Add to Wish List

Engineered for the N54 owner seeking "World Record" caliber performance, the Vargas Stage 3 VTX-R63 Black Kit is a masterclass in turbocharger optimization.

Vargas Single Piece Silicone Cold Side Charge Pipe - BMW EXX N54 ...

T#:52270293

Part#: SILCPN54HKS1

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Upgrade your BMW's intercooler piping with the Vargas Turbo Technologies Silicone Charge Pipe, the easiest-to-install N54 charge pipe on the market.

Vargas Plug & Play Upgraded DV Kit - Single DV, Dual Port - BMW G9X ...

T#:52270292

Part#: S68DVSINGDP

Ships in 10 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The VTT S68 Upgraded DV Kit is an essential upgrade for owners of the G90 M5 or BMW XM looking to move beyond the limitations of factory hardware.

Pure Turbos NEW B58 Gen2 PURE600 Turbo Upgrade - 2-Port - BMW G-Chass...

T#:53255639

Part#: B58G2P600N-2P

Ships in 4 Business Days

$ 1,136.99

This product was last offered at the strikethrough price on
07-15-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

The Pure Turbos NEW Pure600 for the BMW B58 (Gen 2) is a precision-engineered turbo upgrade designed specifically for 2-port cylinder head applications, offering a substantial boost in performance without the need for a core exchange. This unit features a custom aftermarket inlet housing similar to the OEM design for a true plug-and-play installation, integrating seamlessly with your factory turbine manifold. Internally, the Pure600 is equipped with an upgraded billet compressor wheel and a high-flow turbine wheel, both optimized to increase exhaust efficiency and support power levels exceeding 550 wheel horsepower, depending on your supporting modifications and fuel type. Durability and reliability are central to this turbocharger’s design, which includes an upgraded bearing housing to withstand the increased stresses of high-load performance. To ensure smooth, long-term operation, every unit is VSR high-speed balanced to exacting standards. While the Pure600 can run on stock tunes or off-the-shelf maps, custom tuning is highly recommended to fully unlock its potential. This upgrade provides a streamlined path to elite B58 performance, combining robust engineering with a straightforward installation process that retains the refined drivability of your BMW.

Show More Show Less

Pure Turbos NEW B48 Gen1 Pure400 Turbo Upgrade - BMW F22/23 F3X G01/0...

T#:53326236

Part#: G1B48P400

In Stock

$ 1,136.99 USD

Add to Wish List

Qty

$ 1,136.99 USD

Add to Wish List

The Pure Turbos Pure400 for the BMW B48 is a precision-engineered performance upgrade designed for the first generation of BMW’s modular 2.0L inline-4 engine. This unit is built into a brand-new aftermarket housing that utilizes an OEM-style design, ensuring a seamless plug-and-play installation without the requirement of a core exchange or refundable deposit. The turbocharger features an upgraded Pure Turbos billet compressor wheel and a higher-flowing turbine wheel, which together significantly improve exhaust efficiency and airflow capacity. To maintain long-term reliability under the increased thermal and mechanical stresses of high-boost applications, the Pure400 is equipped with a heavy-duty upgraded bearing housing and undergoes meticulous VSR high-speed balancing. Engineered to support over 350 wheel horsepower, depending on fueling and supporting modifications, this upgrade provides a substantial power increase while maintaining the responsive, low-end torque characteristics of the original B48 engine. It is a direct-fit solution for a wide range of 2014–2019 F-series and G-series models, including the 230i, 330i, and X3 xDrive30i, prior to the Technical Update (TU) changes. While the hardware integrates perfectly with factory connections, custom tuning is mandatory to fully optimize the engine’s performance and ensure safe operation. This kit offers a robust and reliable path for 4-cylinder enthusiasts looking to achieve elite-level performance with a clean, factory-appearing finish.

Show More Show Less

Rear Turbocharger Oil Supply Line

T#:56616361

Part#: 11537558901

Special Order: No Guaranteed ETA

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

The Febi Bilstein Rear Turbocharger Oil Supply Line is built to keep oil flowing efficiently to the cylinder 4–6 turbo under demanding conditions.

Turbocharger Boost Pressure Converter

T#:56507866

Part#: 11747626350

Special Order: No Guaranteed ETA

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

This Febi Bilstein Turbocharger Boost Pressure Converter provides the precise actuation necessary to keep your BMW operating at peak boost efficiency.

Turbocharger Oil Supply Line

T#:56507857

Part#: 11428678840

Special Order: No Guaranteed ETA

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

This Febi Bilstein Turbocharger Oil Line is engineered to deliver strict OE-spec oil delivery to keep your turbocharger running cool and fully lubricated.

Pressure Converter For Turbocharger

T#:56507868

Part#: 11747626351

Special Order: No Guaranteed ETA

$ 57.99 USD

Add to Wish List

Qty

$ 57.99 USD

Add to Wish List

This Febi Bilstein replacement solenoid valve provides exact fitment and dependable performance needed to maintain optimal boost control.

Vacuum Reservoir For Turbocharger

T#:56544052

Part#: 11652247620

Special Order: No Guaranteed ETA

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Maintain crisp boost response and predictable power delivery under heavy driving conditions with the Febi Bilstein Turbocharger Vacuum Reservoir/Pressure Converter.

Turbocharger Oil Feed Line

T#:56507845

Part#: 11427585402

Special Order: No Guaranteed ETA

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

This Febi Bilstein Turbocharger Oil Supply Line provides the durability required to withstand extreme engine-bay temperatures.

Pressure Converter For Turbocharger

T#:56507869

Part#: 11658509323

Special Order: No Guaranteed ETA

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

This high-quality pressure converter valve from Febi Bilstein offers a cost-effective solution without compromising factory tolerances or reliability.

Vargas Turbocharger Replacement - BMW E8X, E9X RHD N54

T#:52305491

Part#: STK1NWRHBK

Back Ordered

$ 1,889.99 USD

Add to Wish List

Qty

$ 1,889.99 USD

Add to Wish List

The Vargas Replacement Kit is the definitive solution for BMW owners looking to replace failing turbos while also addressing their inherent weaknesses.