Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

OEM VDO Fuel Pump - E46 323i 325i 328i 330i 1999-2005
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:2781
Part#: 16146766942
Ships in 1 Business Day
$ 194.99

This product was last offered at the strikethrough price on
04-29-2026

$ 180.99 USD
Free Shipping
$ 180.99 USD
Free Shipping

Restore your fuel systems operation with this high quality OEM VDO fuel pump. This fuel pump fits the BMW E46 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci from 1999-2005. This fuel pump is located inside the fuel tank on the right side. Manufactured by VDO. Note not for 325i 325ci with M56 SULEV engine 2003-2006.

Replacement for BMW part # 16146766942, 16141184276, and 16146752499.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2005 E46 BMW 325i 325ci 325xi with M54 engine

Show More Show Less
Precision Raceworks - Corporate Logo
T#:1331979
Part#: 601-0176
In Stock
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:17704785
Part#: 13537799869
In Stock
Sale - Save 20% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping on orders $49 and up

Precision Raceworks - Corporate Logo
T#:37757295
Part#: 601-0240
Back Ordered
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:1165728
Part#: 601-0177
In Stock
$ 494.99 USD
Free Shipping
$ 494.99 USD
Free Shipping
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 550whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.
Show More Show Less
Atlantic Automotive Engineering - Corporate Logo
T#:42200953
Part#: 13517616170RKT
Back Ordered
$ 816.99 USD
Free Shipping on orders $49 and up
$ 816.99 USD
Free Shipping on orders $49 and up
This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094311
Part#: 201-0188
In Stock
$ 54.99 USD
Free Shipping on orders $49 and up

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

  • Seamless fit – Compatible with most aftermarket top mount port injection manifolds
  • Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
  • Leak-proof design – Dual-seal quick connectors for maximum fuel safety
  • High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
  • Easy installation – Direct plug-and-play with factory and aftermarket fuel lines
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161701
Part#: 101-0257
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

  • 6-micron filtration – Removes fine particles and contaminants to protect engine components
  • High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
  • Optimized fuel flow – Maintains consistent fuel delivery for peak performance
  • Durable construction – Engineered for long-lasting reliability in high-demand applications
  • Easy replacement – Simple installation for routine maintenance
  • Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as needed
  • Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Mahle - Corporate Logo
T#:302764
Part#: 13321262324
In Stock
$ 53.99 USD
Free Shipping on orders $49 and up

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Precision Raceworks - Corporate Logo
T#:10714270
Part#: 201-0247
In Stock
$ 164.99 USD
Free Shipping on orders $49 and up
NOTE: Requires a Continental Flex Fuel Sensor be utilized, will not directly replace the OE fuel line. The Precision Raceworks AN6 Fuel line upgrade is a direct replacement from the fuel filter on the driver’s side of the car to the high-pressure fuel pump. All connections are designed in-house and machined from 6061 aluminum then anodized for 100% E85 compliance. All female connectors have 2 seals (a primary and secondary seal) to guarantee no possible fuel leaks. The fuel line used by Precision Raceworks is smooth bore PTFE hose that is wrapped in a Stainless Steel braiding for protection and then a nylon braiding to protect surfaces. This type of hose is used in high-end E85 applications built all over the world. This is a better than OEM quality solution to help you achieve the needs of your high horsepower build on E85. Specifications: Fuel hose type: PTFE Smooth Bore Line Size: -6AN (1/2") Connection Style: OEM Quick Connect Connector Material: 6061 Aircraft Grade Aluminum Connects to flex fuel sensor: Yes
Show More Show Less
Mahle - Corporate Logo
T#:403354
Part#: 13327831089
Ships on Aug 17, 2026
$ 81.47 USD
Free Shipping on orders $49 and up

Ensure optimal fuel delivery for your BMW's engine with the Turner Motorsport Fuel Filter for E46 M3 & Z3 S54 3.2L Engine. Over time, fuel filters can become clogged, hindering the engine's ability to receive sufficient fuel. This can lead to various fuel-related issues such as surging, stalling, cold start problems, and decreased performance. Replacing the fuel filter with a fresh one helps address these issues and ensures smooth engine operation under various conditions.

Benefits:

  • Improves fuel delivery to the engine
  • Addresses fuel-related problems such as surging and stalling
  • Enhances cold start performance
  • Maintains engine performance under various driving conditions
  • Recommended replacement every 60,000 miles, or more frequently in regions with poor fuel quality
Show More Show Less
Precision Raceworks - Corporate Logo
T#:1331988
Part#: 601-0014
In Stock
$ 499.99 USD
Free Shipping
$ 499.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane gas or 500whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!
Show More Show Less


Bavarian Autosport - Corporate Logo
T#:2119641
Part#: 13537574132KT1
In Stock
$ 239.99 USD
Free Shipping
$ 239.99 USD
Free Shipping

MINI R52 R53 JCW Fuel Injector - Set Of 4

Upgrade your MINI with the MINI R52 R53 JCW Fuel Injector - Set Of 4, designed for enhanced performance. Whether you're tuning your W11 Supercharged engine above 200HP+ or replacing injectors in JCW engines, these OEM-designed injectors deliver reliable fuel flow and efficiency.

Key Benefits:

  • OEM design ensures perfect fit and function
  • Suitable for W11 Supercharged engines with tuned setups
  • Direct replacement for JCW engines in R52 S and R53 models
  • Features a two-hole 380cc design for optimal fuel delivery

Bavarian Autosport served the needs of BMW and MINI enthusiasts from 1974-2019. In 2019, ECS Tuning acquired the Bavarian Autosport brand, committing to continuing the tradition of excellence Bav Auto is known for. Over the years, Bav developed their own brand of parts, accessories and upgrades. A lot of these parts are engineered and built by OEMs (Original Equipment Manufacturers – companies who make original parts for BMW, MINI, and other European marques). Just as MINI, we work with a variety of manufacturers in Europe, Asia and North America. In many cases, we have sourced parts that are superior to Original Equipment.

A lot of time and resources have been put into developing and evaluating these products, as well as the companies who produce them. We stand behind every product we sell. If any product fails to meet our standards — or our customers' expectations — we won't sell it, and we're certainly not going to put the Bavarian Autosport name on it. In fact, we're so confident in the quality of these parts that we back every Bavarian Autosport brand part with a 2-year warranty.

Show More Show Less
OEM VDO Fuel Injector - N62 Engine
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:380981
Part#: 13647525721
In Stock
$ 118.68 USD
Free Shipping
$ 118.68 USD
Free Shipping

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. Restore your vehicles fuel system back to top shape with OEM VDO fuel injectors.

OEM replacement for BMW part # 13647525721 and 13537506924.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161736
Part#: 201-0405
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Precision Raceworks - Corporate Logo
T#:37892104
Part#: 601-0288
Ships in 5 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less

Control Unit Fuel Pump - Priced Each
This part must be coded to your vehicle
Bavarian Autosport - Corporate Logo
T#:19560854
Part#: 16147229173
In Stock
Sale - Save 20% $ 224.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 224.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.99 USD
Free Shipping on orders $49 and up
Bavarian Autosport - Corporate Logo
T#:639834
Part#: 13537614317
In Stock
Sale - Save 20% $ 52.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.39 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 52.99

This product was last offered at the strikethrough price on
05-03-2026

$ 42.39 USD
Free Shipping on orders $49 and up
This low-pressure fuel sensor is commonly a cause of an "Increased Emissions" warning on the idrive and for check engine (SES) lights on BMW's with the N54 6 cylinder turbo engine or the S65 V8 engine in the M3. It will also fit a limited number of cars with the N55 engine. This sensor can be traced to a number of drivability issues, including cold start running problems, misfires, stumbling, hesitations, and overall rough running. You will likely have a code for the misfires, rich condition, or for the sensor itself. In some cases, the combination of codes can bring about a limp mode. Replacing this sensor is an easy and inexpensive first step if you're having any of these issues. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:2104263
Part#: 13537528176
In Stock
Sale - Save 15% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 27.19 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 27.19 USD
Free Shipping on orders $49 and up
Direct replacement for high-pressure fuel injectors found on MINI R55, R56, R57, R58, R59, R60 and R61.
Precision Raceworks - Corporate Logo
T#:5216005
Part#: 601-0163
In Stock
$ 899.99 USD
Free Shipping
$ 899.99 USD
Free Shipping
Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away.
Show More Show Less

Mahle - Corporate Logo
T#:580988
Part#: KL9
Ships in 1 Business Day
$ 38.13 USD
Free Shipping on orders $49 and up

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Precision Raceworks - Corporate Logo
T#:1331989
Part#: 601-0056
In Stock
$ 584.99 USD
Free Shipping
$ 584.99 USD
Free Shipping
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a Walbro 535 (F90000285) fuel pump, capable of supporting up to 675whp on 93 octane pump gas or 600whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:5216002
Part#: 601-0110
In Stock
$ 868.99 USD
Free Shipping
$ 868.99 USD
Free Shipping
If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38195449
Part#: 501-0043
In Stock
$ 159.99 USD
Free Shipping on orders $49 and up
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.
Continental - Corporate Logo
T#:377088
Part#: 16147163298
Ships on Sep 1, 2026
$ 343.89 USD
Free Shipping
$ 343.89 USD
Free Shipping

This is the OEM VDO fuel pump and fuel level sensor for most E82 and E9X cars. If your gas gauge is not reading correctly, or not at all, it's probably the level sensor on this pump. Unfortunately, the level sensor is part of the pump assembly and must be replaced as a whole. This fuel pump fits nearly all E82, E90, E92, and E93 turbo and non-turbo cars.

OEM replacement for BMW part # 16147163298.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Precision Raceworks - Corporate Logo
T#:5215998
Part#: 601-0018
In Stock
$ 549.99 USD
Free Shipping on orders $49 and up
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, of supporting up to 1050whp on 93 octane pump gas or 875whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed! With an open expansion slot ready to use, just a simple Stage 3.5 or Stage 4 module is all you need to purchase to increase your fueling capabilities. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you. Stage 2 Specifications: Horsepower Supported Pump Gas: ~1050whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No *To reach the advertised ability of these fuel pumps use of the Precision Raceworks in-tank filter regulator assembly is required.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161730
Part#: 601-0316
Ships in 4 Business Days
$ 299.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW G-Series & A9x Toyota Supra Billet Tophat maximizes fuel system performance with up to three high-flow ports and 12-wire compatibility, offering versatile pump configurations to suit any setup.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:40004858
Part#: 201-0261
Ships in 9 Business Days
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!
Show More Show Less
Mahle - Corporate Logo
T#:367343
Part#: 13321740985
Ships in 1 Business Day
$ 46.05

This product was last offered at the strikethrough price on
07-02-2026

$ 41.46 USD
Free Shipping on orders $49 and up
$ 41.46 USD
Free Shipping on orders $49 and up

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Precision Raceworks - Corporate Logo
T#:5216014
Part#: 601-0207
Ships in 4 Business Days
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195408
Part#: 601-0049
In Stock
$ 299.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks High Performance Fuel Pump is designed for customers looking to run all blends of E85. This kit includes a Walbro fuel pump capable of flowing up to 50% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships with the necessary lines pre-attached to keep your installation as simple as possible! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the fuel pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to providing cool running temperatures allowing the pump to provide many years of service. Stage 2.5 (3.1 liters per minute) - Our Stage 2.5 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 675whp (Rated for 600whp on 100% E85) and is an easy DIY task.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:5216020
Part#: 601-0163-B58
In Stock
$ 899.99 USD
Free Shipping
$ 899.99 USD
Free Shipping
If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis B58 High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 900whp on 93 octane gas or 850whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~900whp Horsepower Supported 100% E85: ~850whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:8169508
Part#: 601-0116
In Stock
$ 594.99 USD
Free Shipping
$ 594.99 USD
Free Shipping
The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094337
Part#: 201-0049
In Stock
$ 99.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.
Show More Show Less
High-Pressure Fuel Pump Replacement Kit - N55
First time replacement will require T#199513 Adapter for vehicles with production date up to 12/2013
Packaged by Turner - Corporate Logo
T#:3165724
Part#: 13518604231KT2
In Stock
$ 387.99 USD
Free Shipping
$ 387.99 USD
Free Shipping
This kit includes new HPFP gaskets needed for a complete and easy install. The fuel pump is the heart of your car, pumping fuel to the engine and making your car run. If your fuel pump is broken, replace it with this original BMW part. If your fuel filter is clogged, you must replace the entire fuel pump assembly.
Show More Show Less


Bavarian Autosport - Corporate Logo
T#:639835
Part#: 13537537319
In Stock
Sale - Save 15% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Located at the rear of the high-pressure fuel rail, this pressure sensor relays fuel pressure information to the vehicle's DME/ECS and is a common source of fault codes. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:41391177
Part#: 13517588879TKT
In Stock
$ 908.60

This product was last offered at the strikethrough price on
06-03-2026

$ 808.60 USD
Free Shipping on orders $49 and up
$ 808.60 USD
Free Shipping on orders $49 and up
Designed for MINI Cooper Turbo N14 engines, this HPFP integrates into the engine bay’s fuel system to efficiently pressurize and supply fuel where it’s needed.
Mahle - Corporate Logo
T#:580985
Part#: KL35
In Stock at Vendor
$ 39.19 USD
Free Shipping on orders $49 and up
$ 39.19 USD
Free Shipping on orders $49 and up
Replacement Fuel Filter

OEM VDO Left Fuel Level Sensor -- E46 M3
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:393373
Part#: 16142229683
Ships in 2 Business Days
$ 183.99

This product was last offered at the strikethrough price on
05-07-2026

$ 182.99 USD
Free Shipping
$ 182.99 USD
Free Shipping

A failed fuel sensor may give you incorrect readings and leave you stranded on the side of the road without fuel. Restore your fuel systems operation with this high quality OEM VDO fuel level sensor. 

Replacement for BMW part # 16142229683

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Packaged by Turner - Corporate Logo
T#:303995
Part#: TEN3680FRC
Ships in 1-2 days
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping
Turner Motorsport has spent the last two decades striving for ultimate performance on the racetrack, and transferring the knowledge gained from winning races onto the street. Their line of BMW performance parts combines, high quality, great value, and most importantly, superior performance that will allow you to dial in your ride to suit your driving style and allow your BMW to live up to its full potential. This modified fuel rail cover will fit the M50 manifold, providing a completed look to your engine bay.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094305
Part#: 601-0260
Ships in 4 Business Days
$ 64.99 USD
Free Shipping on orders $49 and up
For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38195414
Part#: 601-0198
Ships in 5 Business Days
$ 1,319.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4 (5.5 liters per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket with a Walboro 450 (F90000274) fuel pump outside the bucket. This pump can support up to 1,000whp! (Rated for 950whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, slide the bucketless bracket onto the side of bucket and close the top hat you are ready to go!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161702
Part#: 101-0256
Ships in 9 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

  • 10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
  • Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
  • Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
  • Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
  • Versatile use – Perfect for daily driving, street, and high-performance applications
  • Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as necessary
  • Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094309
Part#: 201-0274
Ships in 5 Business Days
$ 24.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?
Show More Show Less

Precision Raceworks - Corporate Logo
T#:5215999
Part#: 601-0096
Ships in 8 Business Days
$ 519.99 USD
Free Shipping
$ 519.99 USD
Free Shipping
If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195447
Part#: 601-0019
Ships in 8 Business Days
$ 269.99 USD
Free Shipping on orders $49 and up
Black Magic Parts' (by Precision Raceworks) bucketless low pressure fuel pumps are designed for customers looking to run all blends of E85. The pump ships assembled with an OEM connector to plug into the factory fuel pump top hat making it quick and easy to install. Our Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161679
Part#: 201-0410
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.


Precision Raceworks - Corporate Logo
T#:38161743
Part#: 622-0270
Ships in 10 Business Days
$ 204.99 USD
Free Shipping on orders $49 and up
Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 6 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161752
Part#: 201-0148
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.
Show More Show Less