BMW Fuel System Parts

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Bucketed Low-Pressure Fuel Pump Kit - Stage 2.5v2 - BMW E9X E8X ...

T#:1165728

Part#: 601-0177

In Stock

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 550whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

T#:37757295

Part#: 601-0240

Back Ordered

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55

T#:38094311

Part#: 201-0188

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

Seamless fit – Compatible with most aftermarket top mount port injection manifolds
Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
Leak-proof design – Dual-seal quick connectors for maximum fuel safety
High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
Easy installation – Direct plug-and-play with factory and aftermarket fuel lines

Show More Show Less

Precision Raceworks Upgraded Fuel Lines W/ Ethanol Sensor Connection ...

T#:10714270

Part#: 201-0247

In Stock

$ 164.99 USD

Add to Wish List

Qty

$ 164.99 USD

Add to Wish List

NOTE: Requires a Continental Flex Fuel Sensor be utilized, will not directly replace the OE fuel line. The Precision Raceworks AN6 Fuel line upgrade is a direct replacement from the fuel filter on the driver’s side of the car to the high-pressure fuel pump. All connections are designed in-house and machined from 6061 aluminum then anodized for 100% E85 compliance. All female connectors have 2 seals (a primary and secondary seal) to guarantee no possible fuel leaks. The fuel line used by Precision Raceworks is smooth bore PTFE hose that is wrapped in a Stainless Steel braiding for protection and then a nylon braiding to protect surfaces. This type of hose is used in high-end E85 applications built all over the world. This is a better than OEM quality solution to help you achieve the needs of your high horsepower build on E85. Specifications: Fuel hose type: PTFE Smooth Bore Line Size: -6AN (1/2") Connection Style: OEM Quick Connect Connector Material: 6061 Aircraft Grade Aluminum Connects to flex fuel sensor: Yes

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58

We Price Match - Give Us A Call or Chat!

T#:39768327

Part#: 06H109311B

In Stock

$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 28.95 USD

Add to Wish List

Qty

$ 28.95 USD

Add to Wish List

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW F-...

T#:1331988

Part#: 601-0014

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane gas or 500whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161736

Part#: 201-0405

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

In Stock

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW F-...

T#:5216005

Part#: 601-0163

In Stock

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away.

Show More Show Less

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2.5 V2 - B...

T#:1331989

Part#: 601-0056

In Stock

$ 584.99 USD

Add to Wish List

Qty

$ 584.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a Walbro 535 (F90000285) fuel pump, capable of supporting up to 675whp on 93 octane pump gas or 600whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!

Show More Show Less

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 3 - ...

T#:5215998

Part#: 601-0018

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running an ethanol blend. Bring your fuel system up to par with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 3 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, of supporting up to 1050whp on 93 octane pump gas or 875whp on 100% E85, and is the perfect modular pump to get you started! Since Precision Raceworks is always looking ahead, they have designed their modular bucketless fuel pump to allow you to upgrade your fuel pump as needed! With an open expansion slot ready to use, just a simple Stage 3.5 or Stage 4 module is all you need to purchase to increase your fueling capabilities. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you. Stage 2 Specifications: Horsepower Supported Pump Gas: ~1050whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No *To reach the advertised ability of these fuel pumps use of the Precision Raceworks in-tank filter regulator assembly is required.

Show More Show Less

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

Ships in 10 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

G-Series BMW & Supra A9x Billet Fuel Pump Top Hat

T#:38161730

Part#: 601-0316

Ships in 5 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks BMW G-Series & A9x Toyota Supra Billet Tophat maximizes fuel system performance with up to three high-flow ports and 12-wire compatibility, offering versatile pump configurations to suit any setup.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E6...

T#:5216014

Part#: 601-0207

Ships in 5 Business Days

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Precision Raceworks Performance Fuel Pump - Stage 2.5 (V2) - BMW E89 ...

T#:38195408

Part#: 601-0049

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks High Performance Fuel Pump is designed for customers looking to run all blends of E85. This kit includes a Walbro fuel pump capable of flowing up to 50% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships with the necessary lines pre-attached to keep your installation as simple as possible! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the fuel pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to providing cool running temperatures allowing the pump to provide many years of service. Stage 2.5 (3.1 liters per minute) - Our Stage 2.5 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 675whp (Rated for 600whp on 100% E85) and is an easy DIY task.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW F-...

T#:5216020

Part#: 601-0163-B58

In Stock

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis B58 High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 900whp on 93 octane gas or 850whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~900whp Horsepower Supported 100% E85: ~850whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2...

T#:8169508

Part#: 601-0116

In Stock

$ 594.99 USD

Add to Wish List

Qty

$ 594.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No

Show More Show Less

BMW Secondary Pump Activation Harness - BMW E9X F22/23 F3X F8X ...

T#:38094337

Part#: 201-0049

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.

Show More Show Less

High-Pressure Fuel Pump Replacement Kit - N55

First time replacement will require T#199513 Adapter for vehicles with production date up to 12/2013

T#:3165724

Part#: 13518604231KT2

In Stock

$ 387.99 USD

Add to Wish List

Qty

$ 387.99 USD

Add to Wish List

This kit includes new HPFP gaskets needed for a complete and easy install. The fuel pump is the heart of your car, pumping fuel to the engine and making your car run. If your fuel pump is broken, replace it with this original BMW part. If your fuel filter is clogged, you must replace the entire fuel pump assembly.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

T#:37892104

Part#: 601-0288

Ships in 6 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

B58 Supra Fuel Pump Retrofit Extension Harness - F3X B58

T#:2810078

Part#: B58PUMPHARNESS

In Stock

$ 45.00 USD

Add to Wish List

Qty

$ 45.00 USD

Add to Wish List

Use this harness to run an improved "Supra" fuel pump in your B58 car. This harness allows you to run the G20 M340i/Supra Fuel pump (13518631642) on your F Chassis B58 car.

Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...

T#:589404

Part#: N54-PORTINJCONMO

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.

Show More Show Less

Fuel-It! Port Injection Kit With Intake Manifold, 950cc Injectors & F...

T#:26038558

Part#: BMW-N54-PRM-950

In Stock

$ 1,088.00 USD

Add to Wish List

Qty

$ 1,088.00 USD

Add to Wish List

Turner Motorsport M50 Manifold Fuel Rail Cover

T#:303995

Part#: TEN3680FRC

Ships in 8 Business Days

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Turner Motorsport has spent the last two decades striving for ultimate performance on the racetrack, and transferring the knowledge gained from winning races onto the street. Their line of BMW performance parts combines, high quality, great value, and most importantly, superior performance that will allow you to dial in your ride to suit your driving style and allow your BMW to live up to its full potential. This modified fuel rail cover will fit the M50 manifold, providing a completed look to your engine bay.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Ships in 5 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 4 - BMW F-...

T#:38195414

Part#: 601-0198

Ships in 6 Business Days

$ 1,319.99 USD

Add to Wish List

Qty

$ 1,319.99 USD

Add to Wish List

The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4 (5.5 liters per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket with a Walboro 450 (F90000274) fuel pump outside the bucket. This pump can support up to 1,000whp! (Rated for 950whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, slide the bucketless bracket onto the side of bucket and close the top hat you are ready to go!

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 6 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 9 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Fuel Pump Expansion Modules - Stage 3 - BMW E9X E8...

T#:38195447

Part#: 601-0019

Ships in 9 Business Days

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Black Magic Parts' (by Precision Raceworks) bucketless low pressure fuel pumps are designed for customers looking to run all blends of E85. The pump ships assembled with an OEM connector to plug into the factory fuel pump top hat making it quick and easy to install. Our Stage 3 bucketed module will add a 450 pump to your existing PR Stage 2 or 2.5 kit. This will include all necessary hardware and wiring to upgrade your pump to a stage 3 and support up to 1000whp* (Rated for 875whp on 100% E85)

Show More Show Less

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

Precision Raceworks AN6 Return Port For In-Tank Regulator-Filter V2 -...

T#:38161743

Part#: 622-0270

Ships on Aug 31, 2026

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Convert your return-less Precision Raceworks V2 E9X/E8x In-Tank Regulator / Filter assembly to a return system. Simply swap out the regulator that came with Precision Raceworks' in tank filter regulator for this fitting and pair it with any regulator system with a return and connect to the AN6 ORB port on this fitting. When used with an engine-bay-located regulator and Precision Raceworks' high flow in tank filter/regulator assembly, it allows the tank filter regulator to really shine, providing the highest flow and most stable fuel pressures the E9x/E8x community has ever seen. This kit includes Precision Raceworks' 6 Bar static micro fuel regulator. This regulator is the simplest way to move your fuel pressure regulation to the engine bay, requiring no adjustment or vacuum lines.

Show More Show Less

Precision Raceworks Port Injection Fuel Line - Plate Style PI - BMW N...

T#:38161752

Part#: 201-0148

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.

Show More Show Less

Precision Raceworks N55 "Gauntlet" HPFP Upgrade - BMW N55 3.0L ...

T#:47164974

Part#: 201-0423

Back Ordered

$ 1,660.00 USD

Add to Wish List

Qty

$ 1,660.00 USD

Add to Wish List

Introducing the N55 Gauntlet High-Pressure Fuel Pump, the latest innovation from Precision Raceworks, built to outperform and provide unmatched value for N55 enthusiasts. Engineered to flow 70% more fuel than stock and 4% more than the original Big Bore, the Gauntlet sets a new standard in high-performance fuel delivery. Whether you’re looking to maximize power or prepare for future upgrades, the Gauntlet HPFP is designed to meet your needs with exceptional performance and reliability. The Gauntlet HPFP supports up to 240 bar fuel rail pressure, providing consistent fuel delivery for even the most demanding applications. Whether you’re running pump gas, E85, or any blend in between, the Gauntlet is proven through over 60,000 miles of on-road testing and dynamic testing on HPFP test benches.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

T#:1165729

Part#: 601-0017

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

Ships in 10 Business Days

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 950cc - BMW N54/N55 3.0...

T#:38262759

Part#: 601-0188

Ships in 10 Business Days

$ 959.99 USD

Add to Wish List

Qty

$ 959.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 950cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi). This means Precision's BMP Port Injection Kit is capable of supporting builds from 500whp up to 1,000+whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Fuel Pump High Pressure Kit

T#:41391177

Part#: 13517588879TKT

In Stock

$ 908.60

This product was last offered at the strikethrough price on
06-03-2026

$ 808.60 USD

Add to Wish List

Qty

$ 808.60 USD

Add to Wish List

Designed for MINI Cooper Turbo N14 engines, this HPFP integrates into the engine bay’s fuel system to efficiently pressurize and supply fuel where it’s needed.

Complete Fuel Injector Replacement Kit - B58

T#:27171936

Part#: 13538625396KT3

Ships in 4 Business Days

$ 647.99

This product was last offered at the strikethrough price on
08-07-2026

$ 637.99 USD

Add to Wish List

Qty

$ 637.99 USD

Add to Wish List

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Basic High Pressure Fuel Pump Replacement Kit

T#:15644266

Part#: 13517616170-KT

In Stock

$ 1,678.35

This product was last offered at the strikethrough price on
06-19-2026

$ 1,677.85 USD

Add to Wish List

Qty

$ 1,677.85 USD

Add to Wish List

HPFP woes? Replacement high pressure exchange pump for the N54 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 3 - N54/55 E-Series ...

T#:403279

Part#: FILPFPK3

Back Ordered

Starting at $ 1,154.83 USD

Add to Wish List

Starting at $ 1,154.83 USD

Add to Wish List

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. This solution provides up to 300% more flow than stock and this assembly can be purchased one of three ways to meet your needs. Trade-in: (Domestic and Canada) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $150 *core deposit. Trade-in: (Euro) This option allows you to receive a rebuilt/upgraded stock bucket with two new Walbro 450 pumps, filters, and fittings to swap out your stock LPFP assembly and requires a $300 *core deposit. New Build: This option includes a new VDO LPFP bucket that is upgraded with new Walbro 450 pumps, filters, and fittings. No core deposit required but is eligible for a core refund of $50 should you elect to return your *stock bucket. (US Spec only) All three options include the following: A complete plug and play solution by simply replacing your stock bucket. However, to utilize the secondary, an additional wiring harness must be installed. Two new E85 compatible Walbro 450 pumps Two new Walbro filters A custom fitting that is tuned to optimize the venturi and pump output Spare vent tube clip Wiring harness for the secondary Flow testing prior to shipping

Show More Show Less

Fuel-It! B58 BMW High Pressure Fuel Pump (HPFP) Upgrade - Stage 1 ...

T#:17106920

Part#: BMW-B58HPFP-A01

Ships on Aug 31, 2026

$ 1,499.00 USD

Add to Wish List

Qty

$ 1,499.00 USD

Add to Wish List

Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware

Show More Show Less

Fuel-It! Low Pressure Fuel Pump Upgrade Stage 1 - N54/55 E-Series ...

T#:403249

Part#: FILPFPK1

Ships in 1 Business Day

Starting at $ 199.99 USD

Add to Wish List

Starting at $ 199.99 USD

Add to Wish List

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP). They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

SAE J30R10 E85 compatible fuel line
14ga fuel resistant wiring harness
Quick connect female bullet connectors (2)
Vent tube replacement clip
Nylon cable ties (10)
Stainless steel lock nuts (2)
10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
Pushlock pump retention fittings (2)
14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)
*Note: Walbro does not warranty this pump for E85 use. If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.
** IMPORTANT: Do NOT attempt to run this kit inline with a Stage 2 kit. The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

Show More Show Less

G8X S58 Flex Fuel Kit

T#:8061332

Part#: S58FLEXFKIT

Ships on Aug 31, 2026

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

This complete flex fuel kit installs in under 30 minutes and reads your exact E85 mixture in the Fuel-It! smartphone app or JB4 app if equipped. Features CNC machined fittings for a quick plug and play installation with nylon sleeved stainless steel braided fuel lines for life long leak free operation. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Supports stand-alone Bluetooth operation with the Fuel-It! app **For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI page option 2/3/4 input to enable.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Fuel Filter Replacement Guidelines:

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results