Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:11497328
Part#: VTT-N54-VACUUM-B
Ships in 10 Business Days
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:11497326
Part#: VTT-N54-DI-DELET
Ships in 1 Business Day
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping
Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets​ Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp
Show More Show Less
High-Pressure Fuel Pump Replacement Kit - N55
First time replacement will require T#199513 Adapter for vehicles with production date up to 12/2013
Packaged by Turner - Corporate Logo
T#:3165724
Part#: 13518604231KT2
In Stock
$ 387.99 USD
Free Shipping
$ 387.99 USD
Free Shipping
This kit includes new HPFP gaskets needed for a complete and easy install. The fuel pump is the heart of your car, pumping fuel to the engine and making your car run. If your fuel pump is broken, replace it with this original BMW part. If your fuel filter is clogged, you must replace the entire fuel pump assembly.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41391177
Part#: 13517588879TKT
In Stock
$ 908.60

This product was last offered at the strikethrough price on
06-03-2026

$ 808.60 USD
Free Shipping on orders $49 and up
$ 808.60 USD
Free Shipping on orders $49 and up
Designed for MINI Cooper Turbo N14 engines, this HPFP integrates into the engine bay’s fuel system to efficiently pressurize and supply fuel where it’s needed.

Packaged by Turner - Corporate Logo
T#:303995
Part#: TEN3680FRC
Ships in 6 Business Days
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping
Turner Motorsport has spent the last two decades striving for ultimate performance on the racetrack, and transferring the knowledge gained from winning races onto the street. Their line of BMW performance parts combines, high quality, great value, and most importantly, superior performance that will allow you to dial in your ride to suit your driving style and allow your BMW to live up to its full potential. This modified fuel rail cover will fit the M50 manifold, providing a completed look to your engine bay.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:27171936
Part#: 13538625396KT3
Ships in 5 Business Days
$ 647.99

This product was last offered at the strikethrough price on
08-07-2026

$ 637.99 USD
Free Shipping on orders $49 and up
$ 637.99 USD
Free Shipping on orders $49 and up

Packaged by Turner - Corporate Logo
T#:15644266
Part#: 13517616170-KT
In Stock
$ 1,678.35

This product was last offered at the strikethrough price on
06-19-2026

$ 1,677.85 USD
Free Shipping on orders $49 and up
$ 1,677.85 USD
Free Shipping on orders $49 and up
HPFP woes? Replacement high pressure exchange pump for the N54 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket
Packaged by Turner - Corporate Logo
T#:15744008
Part#: 13538627842-KT
In Stock
Sale - Save 26% $ 1,250.99

This product was last offered at the strikethrough price on
06-15-2026

$ 929.26 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 1,250.99

This product was last offered at the strikethrough price on
06-15-2026

$ 929.26 USD
Free Shipping on orders $49 and up
Replace your old injectors! Includes a full set of Bosch injectors, and decoupling elements.

Packaged by Turner - Corporate Logo
T#:15644274
Part#: 13517616170KT
In Stock
$ 1,783.31

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.13 USD
Free Shipping on orders $49 and up
$ 1,743.13 USD
Free Shipping on orders $49 and up
This extensive kit includes a HPFP and associated gaskets to get the job done right!

Packaged by Turner - Corporate Logo
T#:5389771
Part#: N55HPFKKT
In Stock
$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD
Free Shipping
$ 1,743.99 USD
Free Shipping
HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533485
Part#: DE-582-25A
Ships in 4 Business Days
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less
Packaged by Turner - Corporate Logo
T#:2810083
Part#: 3671725KT
Ships in 2 Business Days
Sale - Save 1% $ 1,308.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,300.85 USD
Free Shipping
Sale - Save 1%
$ 1,308.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,300.85 USD
Free Shipping
Includes Required Retrofit Harness - This is a retrofit kit that allows you to run the stock fuel pump found on the B58TU Supra engine on your F chassis B58 car. It has increased flow that will support higher horsepower levels without the need for complex fuel system upgrades. Has been tested to support 600+WHP.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:53044116
Part#: 13537531634RKT2
In Stock
New Item
Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD
Free Shipping on orders $49 and up
Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.
Packaged by Turner - Corporate Logo
T#:401622
Part#: 13517616446RKT1
In Stock
$ 1,808.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,807.99 USD
Free Shipping
$ 1,807.99 USD
Free Shipping

N54 HPFP failure is common with BMWs that use this powerplant. Our Packaged by Turner N54 High Pressure Fuel Pump Replacement Kit includes everything you need to replace your N54 HPFP.

Kit includes:

  • Genuine BMW Re-manufactured High pressure fuel pump
  • Intake manifold gasket sets  
  • Throttle body gasket 
  • Low pressure fuel sensor 
  • High pressure fuel sensor 
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5416773
Part#: N63S63HPFPKT
Ships in 1 Business Day
Sale - Save 7% $ 697.99

This product was last offered at the strikethrough price on
05-03-2026

$ 648.78 USD
Free Shipping
Sale - Save 7%
$ 697.99

This product was last offered at the strikethrough price on
05-03-2026

$ 648.78 USD
Free Shipping
Includes both fuel pumps and a new fuel pressure sensor. Solve your fuel delivery issues kit includes both fuel pumps and a new fuel pressure sensor and hardware.

Packaged by Turner - Corporate Logo
T#:5416770
Part#: 13537546245TMSKT
Back Ordered
Sale - Save 9% $ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 802.00 USD
Free Shipping
Sale - Save 9%
$ 876.99

This product was last offered at the strikethrough price on
05-03-2026

$ 802.00 USD
Free Shipping
Includes new injector, fuel rail o-ring and injector holder. A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15677496
Part#: 13537622231-KT
Ships in 1 Business Day
Sale - Save 7% $ 697.06

This product was last offered at the strikethrough price on
05-03-2026

$ 648.78 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 697.06

This product was last offered at the strikethrough price on
05-03-2026

$ 648.78 USD
Free Shipping on orders $49 and up
Solve your fuel delivery issues kit includes both fuel pumps and a new fuel pressure sensor and hardware.
Packaged by Turner - Corporate Logo
T#:56291065
Part#: 13327811227KT2
In Stock
New Item
$ 55.42 USD
Free Shipping on orders $49 and up
This fuel service kit pairs a high flow OEM replacement fuel filter with a fresh dampening ring and securing hex bolt. By replacing the filter and hardware together, you ensure fuel pressure stability

Dorch Engineering - Corporate Logo
T#:55533487
Part#: DE-582-25TS
In Stock
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51778123
Part#: VTT-S58-SINGLE-H
In Stock
New Item
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD
Limited Qty Sale
Free Shipping
The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

Packaged by Turner - Corporate Logo
T#:15710786
Part#: 13647597870-KT
In Stock
$ 1,093.99

This product was last offered at the strikethrough price on
05-12-2026

$ 898.99 USD
Free Shipping on orders $49 and up
$ 898.99 USD
Free Shipping on orders $49 and up

Refresh your old injectors with these OE fuel injectors! Get your car running its best and prevent any failures or issues prematurely!

x6 injector x6 decoupling element


Dorch Engineering - Corporate Logo
T#:55461363
Part#: DE-581-25A
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533507
Part#: DE-55-25B
In Stock
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533486
Part#: DE-582-25B
In Stock
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less


Dorch Engineering - Corporate Logo
T#:55713497
Part#: DE-581-ECA-14
In Stock
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58
Dorch Engineering - Corporate Logo
T#:55713498
Part#: DE-581-ECA-14TU
In Stock
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58
Dorch Engineering - Corporate Logo
T#:55461364
Part#: DE-581-25B
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533476
Part#: DE-55-15B
In Stock
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
The Dorch DS15B High-Pressure Fuel Pump Upgrade is the definitive choice for drivers demanding uncompromised fuel delivery under heavy load. The stock pump simply cannot keep up with the volume required for upgraded turbos
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55713510
Part#: DE-582-ECA-241
Ships in 4 Business Days
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
$ 549.00 USD
Free Shipping on orders $49 and up
This hardware package gives your BMW powerplant the ability to scale output dynamically based on your exact ethanol blend. No more draining the tank or flashing different maps at the gas station
Dorch Engineering - Corporate Logo
T#:55461365
Part#: DE-581-25C
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533509
Part#: DE-581-30A
In Stock
New Item
$ 2,399.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55713511
Part#: DE-582-ECA-242
In Stock
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
$ 549.00 USD
Free Shipping on orders $49 and up
This hardware package gives your BMW powerplant the ability to scale output dynamically based on your exact ethanol blend. No more draining the tank or flashing different maps at the gas station

Dorch Engineering - Corporate Logo
T#:55533480
Part#: DE-58-ECA-M34
In Stock
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering S58 Flex Fuel ECA Kit bridges the gap between raw power and street usability. By utilizing a heavy-duty CAN-bus architecture rather than smartphone apps

Packaged by Turner - Corporate Logo
T#:56471664
Part#: 16116768788KT2
Ships in 1 Business Day
New Item
$ 664.00 USD
Free Shipping on orders $49 and up
This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:21045518
Part#: ATK-BM-0006-BC
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:26938343
Part#: PFS-LPFP-X3/4M-N
In Stock
$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD
Limited Qty Sale
Free Shipping
$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD
Limited Qty Sale
Free Shipping
PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket
Show More Show Less


PFS Port Injection Kit - B58
Aftermarket charge pipe required
Vargas Turbo Technologies - Corporate Logo
T#:5663657
Part#: PFS-B58-PI
Ships in 10 Business Days
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller
Dorch Engineering - Corporate Logo
T#:55461367
Part#: DE-55-15A
Ships in 4 Business Days
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
Eliminate the fueling limits and maintain factory-level reliability with the Dorch Engineering DS15 HPFP Upgrade. This "Stage 1.5" pump replaces the successful DS1, engineered specifically to handle the flow demands of aggressive tuning
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569526
Part#: DE-LK-1038-PWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52164927
Part#: S58PIBLOBLANKS
Ships in 10 Business Days
New Item
$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

Dorch Engineering - Corporate Logo
T#:55533499
Part#: DE-55-25A
Ships in 4 Business Days
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55713499
Part#: DE-581-ECA-14OG
Ships in 4 Business Days
New Item
$ 549.00 USD
$ 549.00 USD
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Dorch Engineering - Corporate Logo
T#:55713521
Part#: DE-582-30B
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds
Dorch Engineering - Corporate Logo
T#:55713502
Part#: DE-581-ECA-57OG
Ships in 4 Business Days
New Item
$ 549.00 USD
$ 549.00 USD
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Dorch Engineering - Corporate Logo
T#:55569525
Part#: DE-LK-1049-PWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533510
Part#: DE-581-30B
Ships in 4 Business Days
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52164908
Part#: PFS-S58-PI-NONE
Ships in 10 Business Days
New Item
$ 949.99 USD
Free Shipping
$ 949.99 USD
Free Shipping
The PFS S58 Port Injection Kit by Vargas Turbo Technologies is the solution for BMW owners who have reached the limits of their factory injection.
Dorch Engineering - Corporate Logo
T#:55569519
Part#: DE-LK-1038-EWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.
Show More Show Less


Dorch Engineering - Corporate Logo
T#:55713505
Part#: DE-581-ECA-X34OG
Ships in 4 Business Days
New Item
$ 549.00 USD
$ 549.00 USD
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58
Dorch Engineering - Corporate Logo
T#:55569521
Part#: DE-LK-1049-EWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.