Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Among the many reasons enthusiasts flock to the S58 is its unmistakable exhaust character. BMW’s twin-turbocharged inline-six delivers a fierce, motorsport-inspired snarl at wide-open throttle—yet the factory mid-section muffles much of that personality. The stock resonator and restrictive flow path tame the soundtrack, muting the aggressive tone your G87 M2 is capable of producing.
Turner Motorsport set out to change that. Their Resonator Delete transforms the factory system with a direct bolt-on mid-section engineered to free both sound and performance. By removing the bulky OEM resonator, integrating a true x-pipe, and shedding roughly 5 lbs of unnecessary weight, this upgrade enhances exhaust scavenging, sharpens throttle response, and unleashes a deeper, more engaging tone. Best of all, it retains full compatibility with the OEM downpipes and valved rear muffler—delivering a noticeable sound improvement while preserving factory functionality and easy reversibility.
Features:
Deeper, more aggressive exhaust note with added character and minimal drone
X-pipe design promotes efficient exhaust scavenging for improved flow
Maintains factory valved muffler operation and OEM-plus refinement
Approximately 5 lb weight reduction vs. the stock center resonator
Brushed 304 stainless steel construction with clean TIG-welded seams
Design:
1.25 mm-wall brushed 304 stainless steel tubing
76.2 mm (3") diameter
304SS sleeve-style and Accuseal clamps with slip-joint adjustability
Installation:
Installation is as easy as cutting your factory exhaust, raising the new center resonator delete into position, and clamping. Click HERE for Installation Instructions. Product Development:
Our Resonator Delete/X-Pipe was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Among the many reasons enthusiasts flock to the S58 is its unmistakable exhaust character. BMW’s twin-turbocharged inline-six delivers a fierce, motorsport-inspired snarl at wide-open throttle—yet the factory mid-section muffles much of that personality. The stock resonator and restrictive flow path tame the soundtrack, muting the aggressive tone your G8X M3/M4 is capable of producing.
Turner Motorsport set out to change that. Their Resonator Delete transforms the factory system with a direct bolt-on mid-section engineered to free both sound and performance. By removing the bulky OEM resonator, integrating a true x-pipe, and shedding roughly 5 lbs of unnecessary weight, this upgrade enhances exhaust scavenging, sharpens throttle response, and unleashes a deeper, more engaging tone. Best of all, it retains full compatibility with the OEM downpipes and valved rear muffler—delivering a noticeable sound improvement while preserving factory functionality and easy reversibility.
Features:
Deeper, more aggressive exhaust note with added character and minimal drone
X-pipe design promotes efficient exhaust scavenging for improved flow
Maintains OEM valved muffler operation for factory refinement
Approximately 5 lb weight reduction vs. the stock center resonator
Brushed 304 stainless steel construction with clean TIG-welded seams
Design:
1.25 mm-wall brushed 304 stainless steel tubing
76.2 mm (3") diameter
304SS sleeve-style and Accuseal clamps with slip-joint adjustability
Installation:
Installation is as easy as cutting your factory exhaust, raising the new center resonator delete into position, and clamping. Click HERE for Installation Instructions. Product Development:
Our Resonator Delete/X-Pipe was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Why own the only V8-powered M3 if you can’t actually hear it? BMW's E9X M3 features a hefty rear muffler assembly that silences the S65's distinctive soundtrack. While full cat-back systems can require a serious financial commitment, our new Muffler Delete Kit offers an affordable, no-compromise solution that brings your M3 to life!
This system transforms the character of your S65 by replacing the restrictive factory mufflers with a free-flowing, TIG-welded stainless steel assembly designed to amplify tone, shed weight, and preserve OEM fit and finish. Our design features dual 2.5" primary tubing that flows into adjustable 3" quad tips, creating a clean yet aggressive aesthetic. Up front, factory-style V-band flanges connect directly to the OEM midpipe—meaning no cutting of factory exhaust piping. At the rear, Accuseal slip-fit connections allow perfect tip alignment within the factory diffuser, ensuring a tailored, symmetrical look every time.
FEATURES
TIG-welded dual 2.5" primary tubing transitioning into adjustable 3" quad tips for a bold, refined appearance
OE-style V-band flanges for true factory-like integration—no cutting required
Accuseal slip-fit joints for full adjustability and precise tip placement
Utilizes factory hangers for a clean, bolt-on installation with zero drilling or modification
PRODUCT DEVELOPMENT
Our Rear Muffler Delete Kit is the result of advanced engineering, testing, and quality assurance by Turner’s Research & Development team. Every stage of development employs FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping for precise fitment and design validation. Performance and durability are proven through Mustang AWD 500 SE dyno testing and Superflow SF-750 Flowbench analysis, ensuring each component meets Turner’s uncompromising standards for performance and quality.
INSTALLATION & SUPPORT
Need installation guidance? Our R&D team has you covered. A complete, start-to-finish install guide is available HERE.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Let’s be honest—what’s the point of owning a B58-powered BMW if you can’t hear it? The factory M340i and M440i rear muffler assembly is oversized, heavy, and overly restrictive, muting the deep, aggressive tone the B58 engine was designed to produce. Our Muffler Delete System is the perfect solution for enthusiasts looking to unleash that signature turbocharged inline-six sound without the cost of a full cat-back system.
Engineered and manufactured in-house, this system replaces the factory rear muffler with a free-flowing, TIG-welded 304 stainless steel setup designed to enhance tone, reduce weight, and maintain OE-level fitment and quality. At the front, 3" primary tubing mates seamlessly to your factory midpipe using a durable stainless steel sleeve clamp. At the rear axle, the primary tubing transitions to dual 2.5" adjustable tailpipe sections for a clean, yet aggressive look. These tailpipe sections merge to quad outlets, designed for compatibility with our selection of 3.5" exhaust tips, allowing you to tailor the system's appearance to your liking. Accuseal-style, slip-fit joints allow for easy adjustment, ensuring perfect tip placement inside the factory rear diffuser. The result? A more engaging exhaust note and a clean, motorsport-inspired appearance that transforms your BMW’s personality both visually and acoustically.
Features & Benefits
TIG-welded 3" primary tubing transitions to dual 2.5" adjustable tip sections for a bold, refined look Accuseal slip-fit joints offer full adjustability for precise alignment and perfect tip placement Direct-fit design connects to the factory exhaust at OE cut points using the original sleeve clamps Quad 2.5" tip outlets compatible with Turner tip options in Brushed Aluminum, Black Chrome, or Mirror Chrome Utilizes factory exhaust hangers for a clean, bolt-on installation—no cutting or drilling required Kit Contents:
Mid-Pipes (Left & Right) Crossover Pipes (Left & Right) Tail-Pipes (Left & Right) Logo Bracket & Hardware (2) Accuseal-Style Exhaust Clamps (2) Sleeve Exhaust Clamps (4) Turner Motorsport 3.5" Tips – Choose Your Finish! Product Development
Our G2X M340/M440 Muffler Delete Kit was designed, engineered, tested, and quality-inspected in-house to ensure the highest level of precision and quality through leading-edge product development technology.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
If you are bored of E53's factory exhaust and want to hear more of your German beast, our E53 muffler deletes are the perfect solution! We developed a simple yet affective way to transform your exhaust without breaking the bank. Our E53 muffler delete system is a slip fit exhaust option that you can install in your own garage with just hand tools.
Over the years your factory muffler gets filled with deposits becoming blocked up and less efficient. The build up of deposits can add weight and can even reduce flow causing build up of unwanted backpressure. You can now remove the large restrictive suitcase mufflers and a install light weight and free flowing exhaust that looks just as good as it sounds! To ensure the best driving experience, muffler deletes retain the factory center resonator to ensure the least amount of drone while still getting that low decibel roaring exhaust tone.
There are few exhaust options on the market for X5's and the ones available are expensive. With the muffler delete pipes, simply cut in front of the mufflers and get the heavy suitcases off your car. Your new muffler deletes feature dual 2.5" exhaust sections and come with the option of brushed aluminum or mirror chrome dual 3" tip exhausts that fit right at home in your factory rear valance.
Can be found in this episode of the "BUILT BY MIKE" YouTube Series
Stock vs Muffler Delete Comparison Video
Features:
Turner designed Rear Muffler Deletes - made of T304 stainless steel, 1.25mm wall thickness, CNC mandrel bent 2.5" tubing for straight-through exhaust gas routing
Tig-welded exhaust hangers that fit into the factory location for direct fitment
Stainless steel Accuseal exhaust clamps are included for a leak-proof seal
Large radius bends throughout provide smooth transitions for optimal flow
KIT Options Include:
Muffler delete sections with clamps
Dual 3.0" exhaust tips (Mirror or Brushed Finish)
Optional exhaust pipe cutter and muffler hanger tools for a DIY
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
325Ci with TSE "light" revving and exterior driving | 330i with TSE "light" stock vs. Corsa, revving | 330ci with TSE "light" revving and drive-by |
| section: | rear muffler |
| connects to: | stock exhaust section up to the rear axle |
| tip style: | 3" dual round; stainless or black (polished) |
| material: | T304 stainless steel |
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Click here for installation instuctions (E30 M3, M5 is similar).
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Introducing our Turner Performance Axle-Back Exhaust for your F87 M2 Competition! Precision-crafted exhaust that elevates your driving experience with a new level of excitement. Designed with our commitment to performance and quality, this exhaust is meticulously engineered to unleash the true potential of your M2. In tandem with performance and sound, our axle-back exhaust enhances the visual aesthetic with upgraded quad exit exhaust tips that complement the overall motorsport nature of your F87. Upgrade your driving experience with our axle-back exhaust for your M2! Unleash the power, bask in the glorious sound, and turn heads wherever you go.
Using our signature design principles this exhaust is crafted to deliver a deep, authoritative tone that reveals the true rowdy attitude of the S55. Designed to utilize the factory valve control our axle-back provides an exhilarating sound during acceleration without compromising the daily driving amenities. Our exhaust is manufactured of 1.25 & 1.5mm wall T304 stainless steel for superior durability, corrosion resistance, and aesthetics.
Designed with the customer in mind, we supply you with instructions to help make the installation DIY friendly. Your exhaust system includes all the necessary clamps and hardware for a hassle-free installation. Upgrade your M2 Comp with our new Turner Motorsport axle-back and let every drive become a statement of power and style.
Click HERE for installation instructions:
Upgrading the sound:
Our exhaust allows you to turn up the volume and let the S55 roar a hearty exhaust tone. Let's be honest, what's the point of owning a S55 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of twin-turbo S55 sound!
How our axle-back is designed:
To create a axle-back exhaust for this incredible vehicle the upgrade happens right after the factory secondary cats. We replaced the factory components with dual 2.5" free-flowing stainless steel piping. The twin pipes make their way through the center and rear of the car without the center muffler to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature F87 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and oe-style hangers the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Quad 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.
Features and Benefits:
Street/Motorsport inspiration
Controlled by factory valves
Compatible with factory mid-pipes
Center muffler delete
Quad exit with pronounced exhaust tips
17 lb weight reduction (Factory - 58lbs, Turner 41lbs)
Part Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25 & 1.5mm wall thickness, back purged and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:
Dual 2.5" free flowing mid-pipes
Valved Rear muffler
2 - Valve extension harness
Valve extension harness
Clamps and Hardware for an OEM+ install
Optional 4.0" Exhaust Tips
Product Development:
Our F87 Valved Axle-back was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
This product was last offered at the strikethrough price on
05-27-2026
The factory cast-iron exhaust manifolds originally fitted to M50, M50TU, and S50B30US-powered E36s are notorious performance bottlenecks, plagued by excessive weight and a tendency to crack over time. Our Equal Length "Shorty" Exhaust Headers offer the ultimate remedy. Engineered specifically to maximize exhaust flow and encourage exhaust gas scavenging, these headers unleash a noticeable boost in overall engine efficiency and grant your M5X that crisp, aggressive inline-six growl without sacrificing low-end torque.
Unlike restrictive, uneven OEM cast-iron manifolds, our design utilizes high-quality T304 stainless steel construction shaped by precision mandrel bending. This specialized process ensures a uniform pipe diameter throughout every bend to maximize exhaust gas velocity and eliminate internal turbulence. The flow-optimized, equal-length primary runners merge seamlessly into a heavy-duty cast stainless steel collector, creating a restriction-free transition that dramatically improves scavenging. Our refined design completely transforms your driving experience, delivering a deeper, more pronounced tone under load while remaining perfectly civilized and drone-free at cruising speeds.
Built to endure years of high-RPM track abuse and extreme thermal stress, these headers are engineered with longevity in mind. Every joint is meticulously TIG-welded for exceptional structural integrity, ensuring the tubes can handle intense heat cycling without cracking. To guarantee a permanent, leak-free seal, the headers feature thick, precision laser-cut flanges that aggressively resist warping over time. Best of all, this is a true, headache-free upgrade; they drop directly into the E36 chassis and mate perfectly with your factory mid-pipe using OEM gaskets and hardware, requiring absolutely no custom fabrication or modification.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!
Other Features Include:
3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp
Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.
Features & Specifications:
3.0" Inner Diameter
4.0" Outer Diameter
Brushed Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026