Shifter Upgrades and Components

Turner Motorsport Dual Shear Selector Rod (DSSR)

Enhance your N54-equipped 135i or 335i’s driving feel with the Turner Motorsport DSSR. Designed to give your shifter a much more precise and solid connection, this DSSR replaces the OEM selector rod, eliminating the play and deflection that come from single-shear designs. Pair it with a Turner short-shift kit for the ultimate shifting upgrade.

Think of the DSSR as a major upgrade from the single-contact OEM rod, much like riding a bike with two hands instead of one: you have stronger, more precise control over each gear change. With its dual-contact setup, the DSSR “sandwiches” both sides of the shifter and transmission, creating a direct link that feels solid, eliminating the vague and sloppy feel of the factory setup.

Key Benefits:

Enhanced Precision: Significantly reduces deflection and play, giving you a more connected feel while shifting Compatible with Factory & Aftermarket Shifters: Perfect for custom setups as well as stock configurations Durable Build: Fabricated from high-quality 303 stainless steel, offering rust resistance and longevity Complete Hardware Included: Comes with zinc-plated hardware for a secure installation Specifications:

Material: 303 stainless steel construction Compatibility: Replacement for part #25117524722 (E8X/E9X N54 models) Installation Design: Two-piece assembly with captive pins, designed for simple alignment and adjustability Fitment: Specially engineered to fit the tight N54 carrier without interference Installation Tips:

Remove your factory selector rod and take note of its orientation. Attach the DSSR to both the transmission selector joint and lower shift lever. Shift to 3rd or 5th gear for maximum access to the supplied hardware, then secure tightly.

Turner Motorsport Polyurethane Shifter Arm Bushing

Want more responsive and accurate shifts without sacrificing comfort? The Turner Motorsport Polyurethane Shifter Arm Bushing is the perfect enhancement to reduce unwanted movement and play in the shift arm assembly. Factory rubber bushings absorb vibrations for smoothness but compromise direct feedback and often wear out, leading to sloppy, imprecise shifting.

Crafted from high-performance polyurethane with a corrosion-resistant 304 stainless steel sleeve, this bushing maintains stability without stretching or wearing out like rubber. Experience the tactile feel of more precise shifts, with minimal NVH (Noise, Vibration, and Harshness) added to your drive. A must-have for any driver looking to take control of their BMW's performance.

Key Features:

Precision Control: Firmer than factory rubber for a crisp, responsive shifter feel Long-Lasting Materials: Made with durable 70a polyurethane and a 304 stainless steel mounting sleeve Easy Installation: Direct replacement—no modifications needed OEM Compatibility: Replaces BMW part numbers 25111222015 and 25111222652 Specifications:

Material: High-quality 70a polyurethane and 304 stainless steel Made in the USA: Proudly manufactured with quality materials Durability: Improved lifespan over factory rubber bushings, reducing slop and enhancing gear engagement

Turner Motorsport presents the Double Adjustable Short Shift Kit, providing a solution to the historically long throw shifters in BMWs. Turner's short shifters, with height and throw adjustability, offer a double-adjustable feature, allowing users to find their preferred driving sweet spot.

For those curious about the long shifter, Turner's rally lever extension (available separately) provides a Quick Change option, making switching between long and short levers effortless. Whether your vehicle is for track use, weekend adventures, or daily commuting, Turner's short shifter kit caters to diverse needs.

Key Benefits:

• Adjustable from a conservative short throw to an ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy in-car installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range to fine-tune shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated, 304 stainless steel shifter ball, and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability
• 22mm independent height adjustability for shift levers
• Rally Upper Shift Lever machine grooved for OEM boot compatibility

When Turner developed their short shifter, the goal was to enhance the BMW shifter assembly's precision and smoothness. Developed with Rennline, the Dual Shear Selector Rod minimizes flexibility for a more precise shift.

Turner Weighted Shift Knob - 6 Speed:

The Turner Weighted Shift Knob promises a fantastic driving experience. The added weight ensures faster engagement and an overall improved shifting experience.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• Weight: 340g (11.99oz)
• 6 Speed Coin design
• Anodized billet shift boot collar with Turner logo

Turner Polyurethane Shifter Arm Bushing:

Enhance your shifting experience with Turner Motorsport's Polyurethane Shifter Arm Bushing. Designed for crisper shifting with reduced NVH.

Features:

• Corrosion-resistant 304 stainless steel mounting sleeve
• Stiffer bushing for a crisper shifter feel
• Ready to install, no modifications required
• Replaces Genuine BMW part numbers 25111222015 and 25111222652
• Improved durability over OEM rubber
• Made in America

Upgrade your BMW driving experience with Turner Motorsport's precision-engineered performance products.

Upgrade your BMW's shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit. Say goodbye to the long factory throws, as Turner's short shifters offer height and throw adjustability, allowing you to find the perfect setting for a more exciting drive.

Don't fret about the long shifter – Turner's rally lever extension (available separately) provides a Quick Change option, effortlessly switching between long and short levers. Whether you're a track enthusiast, a weekend warrior, or a daily driver, Turner's short shifter kit caters to your needs.

Installation is a breeze compared to competitors, thanks to the custom bearing cup that enables easy installation from inside the car. Enjoy the benefits of ultra-crisp shifter feel, quicker and more precise shifts, and an overall more engaging driving experience.

Key Features:

• Adjustable between conservative short throw and ultra-short throw
• Ultra-crisp shifter feel for quick, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade your shifting experience further with the Turner Weighted Shift Knob. Crafted from billet 6061-T6 aluminum, this knob offers a solid, precise feel, enhancing overall shifting performance. With a weight of 340g, it's up to 179% heavier than stock knobs, ensuring smoother shifts and a better driving feel.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• 340g weight for enhanced shift feel
• 6 Speed Coin design
• Anodized billet shift boot collar with Turner logo

Pair these upgrades with the Turner Motorsport DSSR for E36 328 and M3 models. Designed in collaboration with Rennline, this Dual Shear Selector Rod reduces flexibility in the selector rod, resulting in more precise shifts. Machined from 303 stainless steel, it eliminates shifter slop for a positive feel.

Turner DSSR Features & Benefits:

• Reduces play in the shifter for a more positive feel
• Manufactured from 303 stainless steel for corrosion resistance
• Compatible with stock or Turner shifters
• Necessary hardware included for easy installation

Upgrade your BMW's shifting performance with Turner Motorsport – where precision meets driving pleasure.

Turner Motorsport presents the Double Adjustable Short Shift Kit, providing a solution to BMW's historically long throw shifters. Experience the thrill of driving again with Turner's height and throw adjustable short shifters, offering double adjustability for a personalized driving experience.

Wondering about the long shifter? Turner's rally lever extension, available separately, facilitates a Quick Change option, making the transition between long and short levers effortless. Whether you're a track enthusiast, weekend warrior, or daily driver, Turner's short shifter kit is tailored to suit your needs.

Installation is a breeze with the custom bearing cup, allowing easy installation from inside the vehicle. Enjoy the benefits of adjustable throw, ultra-crisp shifter feel, and a more engaging driving experience.

Key Features:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade your driving experience with Turner's Weighted Shift Knob. This 6-speed coin-designed knob enhances shifting with added weight, resulting in faster engagement and an overall improved shifting experience.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weighs 340g (11.99oz) for enhanced shift feel
• Anodized billet shift boot collar with Turner logo

Pair these upgrades with Turner's in-house engineered DSSR for E46 330i/Ci 6-Speed models. Developed in collaboration with Rennline, Turner's Dual Shear Selector Rod reduces flexibility for a more precise shift, eliminating slop in the stock shifter.

Turner DSSR Features & Benefits:

• Reduces play in the shifter for a more positive feel
• Manufactured from 303 stainless steel for corrosion resistance
• Compatible with stock or Turner shifters
• Necessary hardware included for easy installation

Revitalize your BMW's shifting performance with Turner Motorsport, where precision meets driving pleasure.

Complete your Getrag 420G six-speed manual swap with a comprehensive shifter solution engineered for precision and durability. This all-in-one kit features our double-adjustable short shifter, dual-shear selector rod, heavy-duty shifter arm, upgraded bushings, and all required installation hardware for crisp gear engagement, reduced shifter slop, and confidence-inspiring performance you'll feel with every shift!

TURNER MOTORSPORT DOUBLE ADJUSTABLE SHORT SHIFT KIT

BMWs have historically been plagued by very long throw shifters from the factory - luckily, we've developed the solution. Our short shifter system is height- and throw-adjustable, offering up to a 52% reduction in throw over stock. Double adjustability enables you to find the sweet spot that will make you excited to drive your car again. Installation of this kit is also of the easiest to tackle. Compared to the competition, a custom bearing cup allows for easy installation from inside the car (on applications that use the stock shifter arm).

Benefits:

Adjustable between a conservative short throw to ultra short throw Ultra crisp shifter feel - quicker, more precise shifts More engaging driving experience Adjustability:

Independently adjustable knob height 22mm adjustment range to fine-tune shifter throw and feel. Note: knob height also affects throw reduction to some degree Independently adjustable shifter throw Adjustable by raising and lowering the lower lever position relative to the pivot ball. Note: ball position also affects knob height by ~10mm range Combined total throw adjustment range ​32 to 52 % reduction in throw over stock E36 shifter. A throw adjustment can be done in the car without removing the shifter DSSR (109MM) - E36 420G

Like all OEM selector rods, the factory part uses single-shear attachment, allowing for deflection within the shifter linkage. The result? Vague, imprecise gear selections that detract from your overall driving experience. The dual-shear selector rod (DSSR) design spreads the torsional force of gear selections across the selector rod joint, reducing deflection for increased precision. Our DSSR is precision-machined from durable 304 stainless steel to further reduce deflection and resist corrosion.

Features:

Provides a more positive feel in the shifter by reducing play in the linkage due to minimized deflection Manufactured from 304 stainless steel for superior corrosion resistance and durability Replacement for 25112228055 (European E36 M3 Evolution) HEAVY-DUTY SHIFTER ARM - E36 420G

To cater to the six-speed swap E36 community, we designed a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, this replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and Turner Motorsport Double-Adjustable Short Throw Shifter Kit.

Features:

6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components POLYURETHANE SHIFTER ARM BUSHING

This shifter bushing is designed to remove the shifter play caused by an old, failed rubber shifter bushing. Manufacturing the bushing from polyurethane instead of rubber reduces the amount of stretch caused by the moving part through the bushing. This maintains the direct crisp feel from your shifter assembly. When your OE shifter arm bushing begins to fail, you will notice slop in shifting, potentially making it easier to miss gears, and it often causes an obvious vibration and movement from the engine RPMs.

Features:

Corrosion-resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane Stiffer bushing results in a crisper shifter feel and a more engaging driving experience. Ready to install out of the box - no modifications required Replaces Genuine BMW part numbers 25111222015 and 25111222652 Improved durability over OEM rubber Made in America Check out the "KIT CONTENTS" tab for a detailed list of everything included in this kit!

Turner Motorsport Chassis Mount Short Throw Shifter

Upgrade your BMW's shifting experience with the Turner Motorsport Chassis Mount Short Throw Shifter—the ultimate solution for precision, control, and race-inspired performance. Designed to eliminate excessive play, reduce shift throw, and enhance driver engagement, this shifter transforms your driving experience with a solid, direct feel that brings excitement to every shift.

Why Upgrade?

BMW's factory shifter assemblies are known for their vague and imprecise feel due to excessive play, soft bushings, and long throw distances. Traditional short shifters reduce shift length but often retain the factory shift carrier, which still allows flex and movement. The Turner Motorsport Performance Chassis Mount Short Shifter takes performance to the next level by completely removing the shift carrier, eliminating all bushing flex and driveline movement for unparalleled precision.

Unlike standard setups, this shifter features an elevated base that moves the fulcrum point higher, resulting in dramatically shorter throws and crisp, accurate shifts. The tall "rally-style" shift lever enhances leverage and positions the shifter closer to the steering wheel for faster gear changes. Additionally, an adjustable centering spring lets you fine-tune self-centering force for the perfect balance of resistance and smoothness.

Features & Benefits

Ultra-Short Throw – Optimized geometry and a raised fulcrum point drastically reduce shift travel for lightning-fast gear changes. Maximum Precision – Chassis-mounted design eliminates bushing flex and floating movement for a direct, race-inspired feel. Solid Shifter Engagement – Eliminates side-to-side play and imprecise gear selection for ultimate driver confidence. Adjustable Centering Spring – Customize the self-centering force to suit your driving style and preference. Premium Materials & Finish – Constructed from 6061 aluminum, 4130 steel, and 316 stainless steel with a durable black anodized finish for strength and longevity. Universal Fitment – Compatible with multiple BMW chassis using the included base plate and hardware (see "Fits These Cars" for exact applications). Race-Inspired Engineering

Designed for enthusiasts who demand the best, the Turner Motorsport Chassis Mount Short Shifter provides unmatched shift feel and precision. The spherical bearing pivot with a maintenance-free brass insert ensures durability and smooth operation, while the rugged CNC-machined construction withstands aggressive shifting and track abuse.

Take full control of your BMW’s shifting performance with Turner Motorsport’s ultimate short shifter upgrade—built for the road, perfected for the track.

Transform your BMW driving experience with the Turner Motorsport Double Adjustable Short Shift Kit. Bid farewell to the historically long factory shifters that plagued BMWs, as Turner's solution provides height and throw adjustability for a driving thrill.

Curious about the long shifter? Turner's rally lever extension, available separately, offers a Quick Change option, making transitions between long and short levers effortless. Ideal for track enthusiasts, weekend warriors, or daily drivers, Turner's short shifter kit is versatile.

Key Benefits:

• Adjustable between conservative short throw to ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy in-car installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Both shift levers offer 22mm of independent height adjustability

Upgrade your driving pleasure further with the Turner Weighted Shift Knob - 5 Speed. Crafted for enthusiasts, this knob enhances the shifting experience, adding weight for faster engagement.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• Weight: 340g (11.99oz)
• 5 Speed Coin design
• Anodized billet shift boot collar with Turner logo engraved

Pair it seamlessly with Turner's short shift kits for a complete shifter makeover, elevating your BMW's performance.

Turner Motorsport presents the Double Adjustable Short Shift Kit, a game-changer for BMWs plagued by historically long factory shifters. Turner's innovative solution provides height and throw adjustability, offering a double-adjustable feature to rediscover the joy of driving.

Concerned about the long shifter? Turner's rally lever extension, available separately, facilitates a Quick Change option, seamlessly transitioning between long and short levers. Ideal for track use, weekend adventures, or daily drives, Turner's short shifter kit suits all needs.

Key Benefits:

• Adjustable from conservative short throw to ultra-short throw
• Ultra-crisp shifter feel for quicker, precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy in-car installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated, 304 stainless steel shifter ball, and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability
• 22mm independent height adjustability for shift levers
• Rally Upper Shift Lever with OEM boot compatibility

Turner's commitment to perfection extends to the Turner Weighted Shift Knob - 6 Speed. Designed for driving enthusiasts, this knob delivers a fantastic feel and faster engagement.

Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weight: 340g (11.99oz)
• 6 Speed Coin design
• Anodized billet shift boot collar with Turner logo

For a complete upgrade, consider the Turner Polyurethane Shifter Arm Bushing, an often-overlooked enhancement for improved shifting response and reduced slop.

Features:

• Corrosion-resistant 304 stainless steel mounting sleeve
• 70a polyurethane for crisper shifter feel
• Ready to install, no modifications required
• Replaces Genuine BMW part numbers 25111222015 and 25111222652

Upgrade your BMW experience with Turner Motorsport's high-quality, precision-engineered performance products.

Turner Motorsport Doorbuster Kit: Double Adjustable Short Shifter Kit & 389mm DSSR for BMW Z3

Upgrade your BMW Z3’s shifting dynamics with this Turner Motorsport Enthusiast Bundle, which includes the Double Adjustable Short Shifter Kit and 389mm Dual Shear Selector Rod (DSSR). Enjoy enhanced control, adjustable throw, and a precise, connected feel—perfect for anyone looking to take their Z3’s performance to the next level.

TURNER DOUBLE ADJUSTABLE SHORT SHIFTER KIT

BMW’s factory shifters are often known for their long throw, but Turner Motorsport has crafted a solution that redefines the experience. This Double Adjustable Short Shifter offers customizable throw reduction—up to 52%—along with height adjustability, allowing you to dial in the exact feel you want.

A standout feature is the Quick Change rally lever extension. This lets you effortlessly swap between a taller lever, ideal for spirited driving or track days, and a shorter one, for daily use.

Benefits:

Adjustable Throw: From a slight reduction to an ultra-short throw. Crisp Shifts: More precise, quicker shifts for a connected driving experience. Easy Installation: Bearing cup assembly for installation from inside the cabin. Rally Style Option: Switch easily to a taller lever for track-focused driving. Installation and Adjustability:

Height Adjustability: 22mm range for knob height fine-tuning. Throw Adjustability: Independently adjustable throw using a set screw on the shifter ball—no need to remove the shifter. Total Adjustment Range: Up to 52% throw reduction compared to the stock E36 shifter. Design Features:

Materials: CNC-machined 4140 chromoly steel, 304 stainless steel shifter ball, Nylatron® NSM bushings. Anodized Aluminum: 6061-T6 aluminum levers and bearing cup, ensuring durability and corrosion resistance. Knob Compatibility: Compatible with OE BMW and most aftermarket knobs, with a Quick Change rally lever featuring a black Delrin knob. TURNER 389MM DSSR FOR Z3

Turner Motorsport’s 389mm DSSR is designed to provide a superior shifting experience over the factory selector rod. This Dual Shear Selector Rod (DSSR) is crafted for the Z3 6-cylinder models (replacing part #25111222780), offering better control and eliminating unwanted play.

The DSSR works by “sandwiching” the shifter’s connection points, stabilizing the entire mechanism and enhancing the direct feel of each shift. Pair it with Turner’s poly rear shifter bushing for an even more refined experience.

Benefits:

Enhanced Shift Feel: Reduces deflection and play, resulting in more precise shifts. Compatible with Factory and Turner Shifters: Matches the 389mm length for factory knob positioning. Corrosion Resistance: Made from 303 stainless steel for longevity and durability. Design Features:

Driver-Centered Lean: Maintains a 5-degree lean toward the driver for natural ergonomics. Laser-Etched Branding: Includes Turner Motorsport’s logo for a premium, authentic look. Why Choose the Turner Motorsport Short Shifter Kit and DSSR?

With this kit, you’re not only getting a fully adjustable short shifter to make your driving more responsive and engaging, but also a high-quality DSSR for reinforced stability. This combo is perfect for drivers who demand precision, control, and an elevated connection with their Z3’s transmission.

Revolutionize your shifting experience—Turner Motorsport has you covered with engineering, performance, and durability.

Upgrade your BMW shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit. Say goodbye to long factory throws and hello to a double-adjustable short shifter that brings excitement back to your driving. Turner's innovation allows you to fine-tune both height and throw, providing a customizable and engaging driving experience. Whether you're a track enthusiast, a weekend warrior, or a daily driver, Turner's short shifter kit caters to your needs.

Benefits:

• Adjustable between a conservative short throw to an ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• More engaging driving experience

Installation:

• Bearing cup assembly for easy installation from inside the vehicle
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range to fine-tune shifter throw and feel
• Independently adjustable shifter throw
• Adjustments can be done in the car without removing the shifter

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• Lower shift arm with a 10mm adjustment range
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Rally Upper Shift Lever machine grooved for OEM boot compatibility

Turner Weighted Shift Knob - 6 Speed

The Turner Weighted Shift Knob adds an extra dimension to your driving experience. With a fantastic feel and increased weight for faster engagement, this shift knob is designed to make you want to hit the road. Crafted from billet 6061-T6 aluminum with a durable anodized finish, this knob boasts precision and durability. The weighted design, at 340g, smoothens shifts for faster engagement, providing an improved overall shifting experience.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• 340g (11.99oz) for enhanced shift smoothness
• 6 Speed Coin design
• Anodized billet shift boot collar with Turner logo engraved

Turner Motorsport DSSR - E39 540i/M5 (273mm)

Take your BMW E39 540i/M5 shifting to the next level with the Turner Motorsport DSSR. Developed in collaboration with Rennline, this Dual Shear Selector Rod (DSSR) eliminates slop in the stock shifter, providing a more precise and accurate shift. Compatible with stock or Turner shifters, the DSSR is machined from 303 stainless steel for superior corrosion resistance.

Features & Benefits:

• Provides a more positive feel by reducing play in the linkage
• Minimizes deflection for a crisp shift
• Manufactured from 303 stainless steel
• Replacement for 25111222717 (E39 540i or M5 models)
• Works with stock or Turner shifters
• Necessary hardware included