Drivetrain Mounts and Upgrades

IRP Performance Polyurethane Engine and Transmission Mounts - E36 E46...

T#:401413

Part#: IRPEGS-2

In Stock

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

Solid mounts are great for an immediate transfer of power but allow for a ton of noise and vibration to be felt and heard in the cabin of the vehicle. This is great for the track where there aren't any issues with excess harshness, but as a daily driver, this can become an annoying pain in the neck.

The best middle ground is Polyurethane. Polyurethane is much stiffer than rubber and gives you the much stiffer feel you may be looking for. This allows for the increase in responsiveness, but isn't so extreme that it transfers all of the sound and vibrations into the cabin. This makes it much more comfortable for daily use while still reinforcing your driveline.

Features:

Aluminum and Polyurethane Construction
80A Durometer Rating
New Hardware

Show More Show Less

Condor Speed Shop Differential Stud Kit - 45mm - E30, E28, E36 318ti,...

T#:578193

Part#: DIFSTKT-1

In Stock

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

Condor Speed Shop took the hard work out of removing and reinstalling your differential! If you've ever taken out your diff, you know how much of a pain it is to get the bolt holes to line up during re-installation. They never seem to line up perfectly, and getting the bolts to go in can be time-consuming. Condor's diff studs are designed to make your life a little easier. The diff will line up and lift right into the holes every time. 38mm studs are used with OEM or regular subframe bushings. 45mm studs are used with the 12mm riser subframe bushings. You'll need to pull the driveshaft to drop the diff. Use thread locker during install. Recommended for street or race use. Kit includes: 4 Studs 4 Washers 4 Lock Nuts

Show More Show Less

Condor Speed Shop G260 Transmission Brace for 24v Swaps - E30 BMW ...

T#:577863

Part#: G260TBRACE

Ships in 1 Business Day

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Ultra-light aluminum G260 transmission brace for 24V engine swaps. This brace must be used if swapping a 24v motor into an e30, with the original G260 transmission. *Please note you will need to bend/twist the selector rod to get your shift lever in the correct orientation.

Show More Show Less

Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...

T#:637547

Part#: BMS-DSBB-F

Back Ordered

Starting at $ 129.00 USD

Add to Wish List

Starting at $ 129.00 USD

Add to Wish List

The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.

Show More Show Less

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case ...

T#:1316770

Part#: E9XDIFFBRACE-SM

Back Ordered

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case

The BMW E9X 335i BMS Differential Support Bracket Brace - Small Case is a high-performance upgrade designed to enhance the stability and durability of the differential mount. Turner Motorsport offers this precision-engineered brace to reduce flex and movement of the differential, ensuring improved power transfer and handling. Ideal for high-performance driving or track use, this brace helps maintain proper alignment and extends the lifespan of your differential components.

Benefits:

Enhances differential stability by reducing flex and movement
Improves power transfer and handling performance
Precision-engineered for a perfect fit and reliable performance
Ideal for high-performance driving and track use
Extends the lifespan of differential components
Made from high-quality materials for durability and strength

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...

T#:577564

Part#: S14M+T

Ships in 4 Business Days

$ 80.00 USD

Add to Wish List

Qty

$ 80.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. This kit includes Solid Transmission Mounts as well for fully solid powertrain mounting!

Show More Show Less

Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mount...

T#:577859

Part#: M20M_TRANS

Ships in 4 Business Days

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

Under hard braking the stock mounts allow the m20 to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E30. These solid UHMW motor mounts are a direct replacement for your original 1984-1991 E30 BMW 323, 325e 325es 325i 325ic 325is' OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well!

Show More Show Less

Genuine MINI Lower Engine Mount/Rubber

T#:22673

Part#: 22116783094

In Stock

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

Genuine MINI HOLDER WITH RUBBER MOUNTING

Engine Mount

T#:641903

Part#: 22118835574

Ships in 2 Business Days

6% off MSRP $ 224.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Qty

6% off MSRP

$ 224.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Genuine MINI Transmission Support Bracket / Mount

T#:49462

Part#: 22316754422

Ships Today

7% off MSRP $ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 268.99 USD

Add to Wish List

Qty

7% off MSRP

$ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 268.99 USD

Add to Wish List

Genuine MINI SPPRT BRACKET,TRANSM.,WITH R

Upper Engine Mount / Rubber

T#:5189123

Part#: 22118835572

In Stock

13% off MSRP $ 224.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

Qty

13% off MSRP

$ 224.69

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 194.99 USD

Add to Wish List

ENGINE MOUNT B46 2.0L

T#:4251507

Part#: 22118835566

In Stock

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Enhance the stability and performance of your BMW's B46 2.0L engine with the durable Engine Mount. This high-quality rubber mount, equipped with sturdy metal brackets, ensures optimal support and reduces vibrations, contributing to a smoother and more efficient driving experience.

Stability Improvement: The Engine Mount enhances overall stability for improved driving control.
Vibration Reduction: Designed to minimize engine vibrations, resulting in a smoother ride.
Durable Construction: High-quality rubber and metal brackets ensure long-lasting performance.
Engine Support: Provides crucial support to the B46 2.0L engine, optimizing its functionality.

Upgrade your BMW's driving experience with the B46 2.0L Engine Mount, a reliable component designed for stability and performance.

Show More Show Less

Engine Mount

T#:17272949

Part#: 22118835568

Ships in 3 Business Days

8% off MSRP $ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Qty

8% off MSRP

$ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Conder Speed Shop Solid Transmission Mounts - BMW F22/23 F3X RWD ...

T#:597365

Part#: TRANSIX_F2XF3X

In Stock at Vendor

$ 34.00 USD

Add to Wish List

Qty

$ 34.00 USD

Add to Wish List

These UHMW race grade transmission mounts are the ultimate solution to keep your transmission from moving under heavy load or acceleration. Transmission movement or "play" can cause missed shifts and extreme mechanical damage in some cases.

Show More Show Less

Condor Speed Shop Street Polyurethane Transmission Mount - E10 2002 1...

T#:577575

Part#: PLYE10TRANS

Ships in 3 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Condor Speed Shop Solid Motor & Transmission Mount Set - E34 535i w/ ...

T#:577962

Part#: E34M30_TRANS

Ships in 3 Business Days

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Solid UHMW 535i engine mounts for your m30 powered E34. Under hard braking the stock mounts allow the engine to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your E34. These solid UHMW mounts are a direct replacement for your original E34 535i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Condor Speed Shop Solid Engine & Transmission Mount Set - E34 525i ...

For Vehicles With Manual Transmission

T#:577960

Part#: E34M_TRANS

Ships in 1 Business Day

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Solid UHMW 525i engine mounts for your M50tu powered E34. Under hard braking the stock mounts allow the motor to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E34. These solid UHMW motor mounts are a direct replacement for your original E34 525i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes transmission mounts.

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

T#:577565

Part#: S14M

Ships in 1 Business Day

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...

T#:577966

Part#: E30_M10M_TRANS

In Stock at Vendor

$ 115.00 USD

Add to Wish List

Qty

$ 115.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well.

Show More Show Less

14mm Front Differential Bushing Upgrade

You will need to drill the diff casing & tap to M14x1.5

T#:597385

Part#: 14MME36DIFFBU

Ships in 3 Business Days

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

These E36 & E36 M3 Differential Bushings from Condor Speed Shop are designed for the street and the track. You won't have to worry about any more rubbery flex in your diff mounts during hard acceleration. They use UHMW in all their suspension bushings because they are stiff, and have almost zero deflection while also absorbing vibration. It will outlast other types of rubber and polyurethane bushings.

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

Condor Speed Shop Solid Engine Mount Set - E34 525i

T#:577959

Part#: E34M

Ships in 3 Business Days

$ 117.00 USD

Add to Wish List

Qty

$ 117.00 USD

Add to Wish List

Solid UHMW 525i engine mounts for your M50tu powered E34. Under hard braking the stock mounts allow the motor to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E34. These solid UHMW motor mounts are a direct replacement for your original E34 525i BMW OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...

T#:577964

Part#: E30_M42M_TRANS

Ships in 3 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M42 powered e30s. Under hard braking the stock mounts allow the M42 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Fitment: 1990-1991 E30 BMW 318i, 318is, 318ic

Show More Show Less

Genuine MINI Upper Engine Mount/Rubber

T#:22672

Part#: 22116782374

Ships in 3 Business Days

7% off MSRP $ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.99 USD

Add to Wish List

Qty

7% off MSRP

$ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.99 USD

Add to Wish List

Genuine MINI RUBBER MOUNTING

Genuine MINI Transmission Support Bracket / Mount

T#:49493

Part#: 22316784355

Ships in 3 Business Days

7% off MSRP $ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.99 USD

Add to Wish List

Qty

7% off MSRP

$ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.99 USD

Add to Wish List

Genuine MINI TRANSMISSION BEARING SET

Genuine MINI Transmission Support Bracket/Mount

T#:194642

Part#: 22316853453

In Stock

7% off MSRP $ 195.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 182.99 USD

Add to Wish List

Qty

7% off MSRP

$ 195.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 182.99 USD

Add to Wish List

Genuine Bmw Rubber Mounting

Genuine MINI Lower Engine Rubber Mount

T#:19593

Part#: 22116756406

Ships in 3 Business Days

6% off MSRP $ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD

Add to Wish List

Qty

6% off MSRP

$ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD

Add to Wish List

Genuine MINI ENGINE & TRANSMISSION SUSPENSION HOLDER WITH RUBBER MOUNTING.--

This item fits the following BMWs:
MINI Cooper - Mini Cooper, Mini Cooper Convt, Mini Cooper S, Mini Cooper S Convt

--.

Show More Show Less

Genuine MINI Adapter Plate For Engine Support - Passenger Side ...

T#:49360

Part#: 22116772034

Ships in 3 Business Days

7% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.99 USD

Add to Wish List

Qty

7% off MSRP

$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.99 USD

Add to Wish List

Genuine MINI ADAPTER PLATE

Genuine MINI Transmission Support Bracket / Mount

T#:49525

Part#: 22326768207

Ships in 3 Business Days

7% off MSRP $ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 268.99 USD

Add to Wish List

Qty

7% off MSRP

$ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 268.99 USD

Add to Wish List

Genuine MINI SPPRT BRACKET,TRANSM.,WITH R

IRP Performance Solid Engine and Transmission Mounts - E30 E36 E46 ...

T#:401414

Part#: IRPEGS-1

Special Order: No Guaranteed ETA

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

The middle ground is Polyurethane. Polyurethane is much stiffer than rubber, but these still let a large amount of movement in comparison to solid mounts. These are great for sporty, aggressive street driving, but for the track are not ideal.

For the track, solid mounts are great. Solid mounts give you an immediate transfer of power, at the cost of increase NVH. This is great for the track where comfort is the least of your worries and power is all that is important.

Features:

Aluminum and Polyurethane Construction
80A Durometer Rating
New Hardware

Show More Show Less

IRP Isolated Aluminum Engine Mounts - E9X, E8X (non-M)

T#:2423579

Part#: IRPEM-9XAL

Special Order: No Guaranteed ETA

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Direct replacement performance mounts. Features: CNC machined lightweight high quality anodized aluminum Replaces OE: 22116760330; 22116773744 Includes: 2 pcs. aluminum engine mounts

IRP Aluminum Differential Bushings - E82 1 M, E9X M3

T#:587016

Part#: IRPDB-9XMAL

Special Order: No Guaranteed ETA

$ 133.99 USD

Add to Wish List

Qty

$ 133.99 USD

Add to Wish List

These aluminum mounts are a direct replacement for the stock rubber bushings and have been lightened to remove excess weight. Using aluminum instead of rubber eliminates the "wind up" inherent in rubber mounts, and this deflection slows suspension & drivetrain response. The tradeoff is an increase in NVH. Features: Stiffens chassis/Improves stability Less wear of other components Better durability Provides better control of chassis geometry Replaces OE: 33312284019, 33312283384 Recommended for racing use only Includes: 1 rear aluminum bushing 2 front aluminum bushings

Show More Show Less

Genuine MINI Transmission Support Bracket/Mount

T#:49494

Part#: 22316784357

Ships in 3 Business Days

7% off MSRP $ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.99 USD

Add to Wish List

Qty

7% off MSRP

$ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.99 USD

Add to Wish List

Genuine MINI TRANSMISSION BEARING SET

Genuine MINI Engine Support Bracket - Passenger Side - (NO LONGER AVA...

T#:49359

Part#: 22116772032

In Stock

4% off MSRP $ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD

Add to Wish List

Qty

4% off MSRP

$ 123.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD

Add to Wish List

Genuine MINI ENGINE SUPPORTING BRACKET

Genuine MINI Transmission Support Bracket / Mount

T#:194641

Part#: 22316853449

In Stock

8% off MSRP $ 195.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 180.99 USD

Add to Wish List

Qty

8% off MSRP

$ 195.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 180.99 USD

Add to Wish List

Genuine Bmw Rubber Mounting

Elring Differential Axle Seal - E30 E36 E28 E34 E24 E23 E32 Z3 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:369495

Part#: 33107505602

In Stock

$ 9.64 USD

Add to Wish List

Qty

$ 9.64 USD

Add to Wish List

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
E30 318i/is 325e 325i/ix M3
E36 318i/ic/is/ti 323i/is 325i/is 328i/is M3
E28 524td 528e 533i 535i
E34 525i 530i 535i
E24 633CSi 635CSi
E23 733i 735i
E32 735i/iL
Z3 1.9 2.5 2.5i 2.8 3.0i M Coupe/Roadster

Show More Show Less

Engine Mount

T#:3239403

Part#: 22118835562

Ships in 6 Business Days

8% off MSRP $ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Qty

8% off MSRP

$ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Condor Speed Shop Engine Mount Heat Sleeve - M5X, S5X Condor Engine M...

T#:577943

Part#: E36HS

Ships in 5 Business Days

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

Condor's Engine Mount Heat Sleeves reflect up to 90 percent of radiant heat. They withstand 1,100 degrees F of radiant heat and up to 450 degrees F of direct heat. The extra protection of the heat sleeves is a perfect fit for street cars, track cars, and other high heat applications. Their mounts withstand temperatures up to 180 degrees F and do not need any heat protection during regular usage, but we recommend the extra protection of their sleeves for all vehicles with high underhood heat temperatures such as turbo and supercharged vehicles. Condor heat sleeves can be easily installed by simply slipping the sleeve around the engine mount and securing using the Velcro tabs. *LISTING IS FOR ONE HEAT SHIELD **Heat sleeve fitment is for Condor Engine Mounts only.

Show More Show Less

Condor Speed Shop Solid Motor Mount Set - E30 w/ M10

T#:577965

Part#: E30_M10M

Ships in 3 Business Days

$ 90.00 USD

Add to Wish List

Qty

$ 90.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

MINI R56 Drivetrain Mount Kit

T#:574477

Part#: 22116783094KT

Ships in 3 Business Days

$ 428.99

This product was last offered at the strikethrough price on
03-05-2026

$ 425.99 USD

Add to Wish List

Qty

$ 425.99 USD

Add to Wish List

MINI R56 Drivetrain Mount Kit is essential for restoring stability and minimizing vibrations in your MINI's engine and transmission. Designed to reduce engine movement and prevent wear on surrounding components, this kit includes the lower engine mount, upper engine mount, and transmission support mount. Over time, worn drivetrain mounts can lead to excess noise, clunking, and even potential damage to hoses and belts, making this replacement kit ideal for improved performance and durability.

Reduces vibrations and noise for a smoother driving experience
Prevents wear on surrounding components, such as hoses and belts
Complete kit includes lower and upper engine mounts, plus transmission support mount
Designed specifically for MINI R56 models with manual transmission
Ideal for reducing engine movement and enhancing drivetrain stability

Upgrade your MINI R56 with this comprehensive Drivetrain Mount Kit to maintain stability and prolong the life of critical components.

Show More Show Less

Genuine MINI Spprt Bracket,transm.,with R - 22316765337

T#:49471

Part#: 22316765337

Ships in 3 Business Days

7% off MSRP $ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 268.99 USD

Add to Wish List

Qty

7% off MSRP

$ 287.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 268.99 USD

Add to Wish List

Genuine MINI SPPRT BRACKET,TRANSM.,WITH R

Genuine MINI Shift Cable Bracket

T#:52651

Part#: 25111504207

Ships in 3 Business Days

$ 141.51 USD

Add to Wish List

Qty

$ 141.51 USD

Add to Wish List

Genuine MINI DEFLECTION LEVER

Upper Engine Mount / Rubber

T#:5189124

Part#: 22118835570

Ships in 3 Business Days

8% off MSRP $ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Qty

8% off MSRP

$ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Engine Mount

T#:2181301

Part#: 22118835564

Ships in 3 Business Days

8% off MSRP $ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Qty

8% off MSRP

$ 224.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 207.99 USD

Add to Wish List

Installation Tool - Oil Assembly Aid

T#:31589336

Part#: 83192405829

Ships in 9 Business Days

8% off MSRP $ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

Qty

8% off MSRP

$ 36.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.99 USD

Add to Wish List

IRP Aluminum Differential Bushings - E46 M3

T#:587020

Part#: IRPDB-46MAL

Special Order: No Guaranteed ETA

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

These aluminum mounts are a direct replacement for the stock rubber bushings and have been lightened to remove excess weight. Using aluminum instead of rubber eliminates the "wind up" inherent in rubber mounts, and this deflection slows suspension & drivetrain response. The tradeoff is an increase in NVH. Features: Stiffens chassis/Improves stability Less wear of other components Better durability Provides better control of chassis geometry Replaces OE: 33172282484 Recommended for racing use only Includes: 2 rear aluminum bushing 1 front aluminum bushings

Show More Show Less

Project Cars

SELECT YOUR BMW

Drivetrain Mounts and Upgrades

Sub-Categories

BMW E9X 335i BMS Differential Support Bracket Brace - Small Case

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results