Subframe

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 80A durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 80A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

For the BMW E46 M3, upgrading the rear subframe front bushings is a smart move for both performance enhancement and preventive maintenance. The rear subframe is a critical component in the E46 M3’s suspension system, and using stronger, more durable bushings helps to ensure the car’s longevity and improve its overall handling dynamics.

Features and Benefits of Upgraded Rear Subframe Front Bushings:

• Enhanced Strength and Durability: Upgraded bushings, like those from Powerflex or AKG Motorsport, are made from materials such as polyurethane or even solid aluminum. These materials are much stronger than the stock rubber bushings, which tend to wear out, crack, and degrade over time due to exposure to heat, road grime, and oils.
• Improved Handling Performance: By installing stiffer bushings, the rear subframe's movement is reduced, resulting in a more connected and responsive feel from the chassis. This leads to better handling, sharper cornering, and more precise suspension performance under load, making it ideal for track use or spirited street driving.
• Increased Rear End Stability: With stronger bushings, the subframe stays more securely mounted to the chassis, reducing the flex that can occur during hard acceleration or cornering. This helps to enhance the rear end’s stability, giving drivers more confidence, especially in high-performance driving scenarios.
• Protection Against Subframe Issues: The E46 M3 is notorious for rear subframe issues, where cracks can develop in the subframe mounting points over time. Upgrading the bushings helps distribute forces more evenly, reducing the likelihood of stress fractures and extending the life of the subframe.
• Long-Term Solution: High-quality polyurethane or solid bushings are designed to last much longer than the OEM rubber ones. They provide a long-lasting upgrade that doesn’t degrade quickly, making them a "fit-and-forget" solution for many drivers.

Installation and Considerations:

• Direct OEM Replacement: These upgraded bushings are designed to replace the factory bushings without the need for modification. However, installation can be labor-intensive, as the rear subframe must be dropped to access the bushings.
• Reinforcement Opportunity: Since the E46 M3 is known for subframe cracking, many owners opt to upgrade their bushings in combination with rear subframe reinforcement plates, which are welded to the chassis to prevent cracks from forming. This makes it an ideal time to tackle both issues together.
• Minimal Increase in NVH: Polyurethane bushings are stiffer than rubber but generally do not add a significant amount of noise, vibration, or harshness (NVH). However, solid aluminum bushings, while offering the highest performance, can introduce more NVH, which may not be ideal for daily driving.

Best Applications:

• Performance Upgrades: If you're modifying your E46 M3 for track use, autocross, or performance street driving, upgrading to stiffer rear subframe front bushings is a must for better handling and durability.
• Preventive Maintenance: Even if you're not tracking your car, replacing worn-out bushings with polyurethane or solid bushings can help prevent subframe issues and extend the life of your suspension system.

The Powerflex Rear Subframe Front Bushing Insert for the BMW E36 3 Series (1990-1998) is an essential performance upgrade designed to improve the rigidity and responsiveness of the rear suspension. This insert fits directly into the factory rubber bushings, providing enhanced handling and stability for a more enjoyable driving experience.

Key Benefits:

1. Increased Structural Rigidity: Made from high-quality polyurethane, the bushing insert significantly reduces flex in the rear subframe. This increased rigidity enhances stability during cornering and aggressive driving, resulting in improved traction and control.

2. Longevity and Durability: Unlike traditional rubber bushings that can wear out and degrade over time, Powerflex inserts are built to withstand harsh driving conditions. They resist deterioration from heat, oil, and road debris, ensuring consistent performance and durability over the life of the vehicle.

3. Enhanced Handling Performance: By minimizing unwanted movement in the rear suspension, these inserts optimize alignment and handling characteristics. This leads to more precise steering response and better cornering capabilities, providing drivers with a more connected and confident driving experience.

4. Direct Fit for Easy Installation: Specifically designed for the E36 3 Series, these inserts are engineered for a straightforward installation process. They fit directly into the existing front subframe bushings, requiring no modifications, making it an ideal upgrade for both DIY enthusiasts and professional mechanics.

5. Versatile Usage: Whether for daily driving, spirited weekend jaunts, or track applications, these inserts improve the overall performance of the rear suspension system. They help maintain tire contact with the road, enhancing grip and stability under various driving conditions.

This upgrade is perfect for BMW E36 3 Series owners looking to enhance their vehicle's rear suspension performance. The Powerflex Rear Subframe Front Bushing Insert offers a reliable solution for improving handling, stability, and overall driving enjoyment, making it a valuable addition for enthusiasts seeking a more engaging driving experience.

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 75D durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 95A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.