Find Parts That Fit Your Vehicle

Control Arm Bushings

Rubber control arm bushings control movement while offering a suitable amount of deflection for increased comfort and driveability. Swapping these to a stiffer material will reduce deflection and improve response. Turner Motorsport carries a wide variety of bushings and materials to support your individual needs.

Sort By:

FCAB Offset Delrin Race Control Arm Bushings - E30 E36 Z3 - Pair ...

T#:1457

Part#: TSU3080D30

In Stock

Sale - Save 10% $ 82.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 82.99

This product was last offered at the strikethrough price on
05-03-2026

$ 74.69 USD

Add to Wish List

These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

Show More Show Less

Turner Motorsport Thrust Arm Monoball Upgrade Kit

T#:5746398

Part#: 006309LA01-MA

Ships in 5 Business Days

Sale - Save 5% $ 1,059.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,006.99 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,059.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,006.99 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Adjustable Front Camber Bushings

T#:31522921

Part#: 193616-6H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36,...

T#:338064

Part#: 31129069035

Ships in 1 Business Day

Starting at $ 46.99 USD

Add to Wish List

Starting at $ 46.99 USD

Add to Wish List

Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster

Show More Show Less

KMAC Front Adjustable Inner Thrust Arm Bushing

T#:27205341

Part#: 193316-1H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Experience effortless caster adjustment with KMAC's premium inner thrust arm bushings.

Key Features:

1. Patented Design: Enjoy precise adjustments with a single wrench, even under load directly on the alignment rack.

2. Simplified Adjustment: Say goodbye to inaccurate multi-bolt systems and time-consuming disassembly for readjustments.

3. Extensive Adjustment Range: Benefit from the largest and strongest adjustment range available.

4. Mono Ball/Dual-Axis Bushings

5. Enhance brake and steering response with these high-performance bushings.

6. Superior Design: Our unique design surpasses traditional steel spherical bearings, offering over 2 ½ times the load-bearing and impact area.

Upgrade your vehicle's handling and responsiveness with KMAC's innovative inner thrust arm bushings.

Project Cars

SELECT YOUR BMW

Control Arm Bushings

FCAB Offset Delrin Race Control Arm Bushings - E30 E36 Z3 - Pair ...

Turner Motorsport Thrust Arm Monoball Upgrade Kit

Adjustable Front Camber Bushings

Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36,...

KMAC Front Adjustable Inner Thrust Arm Bushing

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results