Ignition

Restore your vehicles performance and smooth out rough idling issues with this ignition service kit. Includes new spark plugs, ignition coils, and dielectric grease.

Fits the following BMW's:
2011+ F10/12/13 BMW M5 M6

Bosch FR7NPP332 spark plug for N52 engines. Listed as BMW part #'s 12120032138 and 12122158253. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This spark plug fits the following BMWs:

2006+ E9X 3 Series - including 325i, 325xi, 328i, 328xi, 330i & 330xi (coupes, sedans, wagons and convertibles) ** no turbo models
2006+ E6X 5 Series - including 525i, 525xi, 528i, 528xi, 530i, 530xi, (sedans and wagons) **no turbo models
2006+ X3 SAV - including X3 3.0i & X3 3.0si
2007+ X5 SAV 6 cylinder, including X5 3.0si
2006+ Z4 Roadster & Coupe - including Z4 3.0i & Z4 3.0si

Revitalize your G Chassis B58 engine bay with the exquisite gloss carbon fiber engine cover from Turner. This carbon fiber upgrade seamlessly replaces the mundane factory plastic cover, instantly enhancing the appearance of your B58 engine. In just minutes, this Turner carbon fiber engine cover delivers a transformative aesthetic, making it one of the initial and simplest modifications for new car owners. Easily transfer the factory emblem from your original engine cover to the new carbon fiber one, marking off a key enhancement from your modification checklist.

The Turner B58 Carbon Engine cover is meticulously crafted, starting with a mold of the original engine cover to ensure optimal factory-form fitment. Constructed from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the cover is finished in a captivating gloss clear coat for UV protection and enhanced durability. Explore Turner's range of remarkable carbon fiber pieces designed to elevate your B58 engine further.

• Gloss carbon fiber engine cover for G Chassis B58 engines
• Quick and transformative upgrade for enhanced aesthetics
• Seamless transfer of the factory emblem
• Meticulously crafted for optimal factory-form fitment
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and extra durability
• Easy installation for an instant engine bay makeover

Set of 6 Blue Performance Ignition Coils

Elevate your engine's performance with Turner BMW Ignition Coils, designed with a focus on efficiency and power. Modified to increase energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The distinctive blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is crucial for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

ECS Tuning N54/N55 Cat-Back Exhaust for BMW E9X Take your 335i or 335xi to the next level with a high-performance cat-back exhaust designed to invigorate your driving experience. Constructed from premium brushed stainless steel, this ECS cat-back exhaust isn’t just about cutting weight—it’s about delivering unrestrained performance with a refined, yet powerful tone. Expect a thrilling soundtrack that underscores every shift and acceleration, giving you that much-needed connection to the road.

This exhaust system is crafted with balance in mind, providing a potent sound without the excessive drone that disrupts highway cruising. Designed for the N54 and N55 engines, it integrates seamlessly with both stock and aftermarket downpipes. Featuring twin 2.5” mandrel-bent pipes and turbo-style mufflers, this exhaust offers increased flow, weight savings, and a deep, exhilarating tone that complements the BMW’s high-output turbocharged engine.

Why Upgrade?

Better Sound and Flow: A dual 2.5” mid-pipe setup leads back to lightweight, turbo-style mufflers. Designed for unrestricted flow, the exhaust enhances horsepower, torque, and throttle response. Signature Tips: Complete with dual black chrome 3.5” tips, this system not only sounds incredible but looks the part, too. Weight Savings: Shedding 37% of the weight, this exhaust replaces the heavy factory cat-back and lightens your load to support a sportier feel. Improved Performance: Reduced backpressure for smoother, more responsive acceleration. Precision Engineering

Design Technology: Using FARO ARM laser scanning and SolidWorks 3D CAD, this system is built for an exact fit. High-Quality Materials: T304 stainless steel construction with 1.25mm wall thickness, TIG-welded for durability. OEM Fitment: Stainless steel hangers are welded in OE locations for a seamless, factory-quality installation. Adjustability: Strategic slip joints make adjustments easy, so you achieve the ideal alignment for your setup. What’s Included?

Dual 2.5” mid-pipes and rear exhaust section High-flow turbo-style mufflers Complete mounting hardware and clamps Black chrome 3.5” exhaust tips Turner Motorsport Performance Ignition Coils

Boosted Performance: Enhanced spark energy translates to a stronger and more reliable combustion cycle. Direct Fitment: Engineered for seamless installation with your BMW’s ignition system. Distinctive Turner Blue: Adds a stylish touch to your engine bay, making it look as good as it performs. Benefits at a Glance

Enhanced Exhaust Sound: Deeper, more aggressive note with minimized cabin drone. Lighter Build: 37% lighter than stock for added agility. Free Ignition Coils: Improved spark for consistent performance and fuel efficiency. Performance Ready: Fully compatible with both OEM and aftermarket setups. Turn heads, enjoy the ride, and make the most out of your BMW’s power with this ECS Tuning N54/N55 Cat-Back Exhaust and Turner Ignition Coil combo—built for enthusiasts who demand the best in performance and style.

Bosch FK7KPP332 spark plug for N62 V8 4.8L engines. Listed as BMW part #'s 12122158252 and 12120032134. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Revamp your G Chassis S58 engine bay with the impressive Turner Carbon Engine Cover. Bid farewell to the plain factory plastic cover as this carbon fiber upgrade promises to swiftly transform your engine bay's appearance. As one of the initial and straightforward modifications for new car owners, simply remove the factory engine cover and transfer the factory "M" badge and grommets onto the new carbon fiber cover. With just minutes of installation, this Turner Carbon Engine Cover elevates the aesthetics of your S58 engine.

Crafted with precision, the Turner S58 Carbon Engine Cover begins with a mold of the original engine cover to ensure an optimal factory-form fitment. Constructed from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the cover is finished with a beautiful gloss clear coat for UV protection and enhanced durability. Explore the range of other exceptional carbon fiber pieces offered by Turner to further enhance your G80 M3 or G82 M4.

• Carbon fiber engine cover for G Chassis S58 engines
• Swift and transformative upgrade for enhanced aesthetics
• Easy transfer of the factory "M" badge and grommets
• Meticulously crafted for optimal factory-form fitment
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and extra durability
• Quick installation for an instant engine bay makeover

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with Turner BMW Ignition Coils, designed with a focus on efficiency and power. Modified to increase energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The distinctive blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is crucial for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Bosch FLR8LDCU+ spark plug for M50, M52, and M62 engines. Listed as BMW part #'s 12129064617 and 12129059794. Over time spark plugs become contaminated, worn, and "fouled out". This can cause a weak or missing spark leading to issues with fuel efficiency, misfires, check engine codes, and poor idle or even direct damage to your catalytic converter. This OEM spark plug made by Bosch will restore OE spark plug operation and function, returning lost power and fuel efficiency.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

MINI N14 N18 Brisk Silver Racing QR08S Spark Plug is the ultimate choice for high-performance and racing engines, offering unparalleled conductivity and efficiency. These spark plugs, made with silver electrodes, are engineered to provide superior ignition ability, increasing engine power and ensuring optimal combustion. Silver conducts 560% more electricity and 481% more heat than platinum, and significantly outperforms iridium, making it the best material for maximizing engine performance.

• Superior conductivity: Silver electrodes provide the most powerful spark, enhancing combustion efficiency and increasing horsepower.
• Enhanced engine performance: Designed to improve ignition ability, lower required ignition voltage, and increase engine power.
• Versatile application: Ideal for supercharged, turbocharged, nitrous engines, as well as stock, modified, and high-mileage vehicles.
• Durable and reliable: Offers good resistance to fouling, easier starts, and is suitable for engines with hard-to-ignite fuels or oil consumption issues.
• Precision fit: 12mm thread, 1.05" (26.1mm) reach, 5/8" (16mm) hex, gasket seat, non-projection tip, and silver center electrode.

Upgrade your MINI's performance with the MINI N14 N18 Brisk Silver Racing QR08S Spark Plug, the perfect choice for any driving enthusiast.