Rear Control Arm

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2007 - 2010 E60 528i 528xi 535i 535ix 550
2003 - 2010 E61 Touring 530xi 
2004 - 2010 E63 6 Series Coupe 645Ci 650i 
2004 - 2010 E64 Convertible 645Ci 650i 

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2007 - 2010 E60 528i 528xi 535i 535ix 550i
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 545i 550i 
2004 - 2010 E63 6 Series Coupe 645Ci 650i 
2004 - 2010 E64 Convertible 645Ci 650i 

Rear trailing arm bushings serve the key purpose of keeping rear suspension triangulated and the vehicle moving where it's directed to. Though failure prone, even factory-fresh OEM rubber bushings allow for deflection, causing suspension geometry changes on hard launches, over bumps in the road, and during cornering. This deflection results in clunking in the rear end, a “rear steer” feeling, and uneven tire wear.

Powerflex polyurethane rear trailing arm bushings are firmer than OEM bushings, resulting in a reduction of deflection that causes these suspension angle changes, improving handling over bumps and with a proper alignment, extending tire wear.Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Trailing arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Improve your BMW's suspension and alignment precision with Godspeed Project's Rear Trailing Arms. Designed to combat poor road or track conditions, these trailing arms offer stability and reduced tire wear, enhancing vehicle handling.

Key Benefits:

• Precise alignment adjustment for stability at high speeds
• Solid spherical bushings resist wear, ensuring durability
• Heat-treated ball and hard chrome plated alloy steel construction for strength
• Stainless steel race with PTFE fabric lining provides self-lubrication, minimizing wear
• Affordable performance upgrade with increased adjustment ranges and versatility
• Solid design offers improved road feel and handling feedback

Ensure optimal performance and alignment with Godspeed Project's Rear Trailing Arms, ideal for track use to enhance suspension reinforcement.

The Powerflex Adjustable Rear Trailing Arm Bushing for the BMW E32, E34, E28, and E24 models is engineered to optimize the performance of the rear suspension system. With its adjustable design, this bushing allows for precise tuning of suspension settings, making it an essential upgrade for both daily drivers and performance enthusiasts.

Key Benefits:

1. Precision Adjustability: The adjustable feature of this bushing allows drivers to fine-tune their trailing arm positioning, enabling adjustments to camber and toe angles. This customization is particularly beneficial for those who participate in motorsport events or track days, where suspension alignment can significantly impact performance.

2. Enhanced Handling Characteristics: Replacing factory rubber bushings with high-performance polyurethane increases the stiffness and responsiveness of the rear trailing arm. This improvement results in reduced body roll and enhanced cornering stability, providing a more dynamic driving experience.

3. Durability and Longevity: Constructed from high-quality polyurethane, these bushings are designed to withstand harsh conditions and resist wear from oil, heat, and road debris. Unlike traditional rubber bushings, they offer greater longevity and performance reliability.

4. Improved Steering Response: The firmer connection provided by these bushings enhances road feedback and steering precision. Drivers will experience a more connected feel to the road, allowing for better control and confidence during spirited driving.

5. Easy Installation: Specifically designed for the BMW E32, E34, E28, and E24, these bushings are a direct fit into the existing trailing arm mounts. Installation is straightforward and requires no modifications, making it an accessible upgrade for DIY enthusiasts.

This upgrade is ideal for BMW owners seeking to enhance the performance and adjustability of their vehicle’s suspension. The Powerflex Adjustable Rear Trailing Arm Bushing offers a robust solution for improving handling, stability, and overall driving enjoyment, making it suitable for various driving conditions.

For BMW E30, Z3, E21, and 2002 models, upgrading to adjustable rear trailing arm bushings from manufacturers like Powerflex offers both improved performance and the ability to fine-tune suspension alignment. These bushings are designed to replace the factory rubber bushings, which can degrade over time and lead to imprecise handling.

Key Features and Benefits:

• Adjustable Alignment: These adjustable rear trailing arm bushings allow you to modify rear toe and camber settings. This is crucial for fine-tuning the suspension for different driving styles, especially if the car is used in motorsport applications like track days or autocross, or if the car has been lowered and needs suspension corrections.
• Superior Handling: By significantly reducing the play in the rear trailing arms, these bushings improve the car’s handling dynamics. They keep the rear suspension more rigid during acceleration, braking, and cornering, resulting in sharper, more predictable handling.
• Polyurethane Durability: Unlike the OEM rubber bushings, which wear out over time due to heat, road grime, and chemicals, these adjustable bushings are made of durable polyurethane. This material resists aging, cracking, and wear, ensuring consistent performance over a longer period.
• Reduced Deflection: Adjustable polyurethane bushings limit suspension deflection, allowing the vehicle to maintain optimal suspension geometry under load. This improves cornering performance and reduces body roll.
• Longer Service Life: Polyurethane bushings are known for their longevity compared to rubber bushings, offering a "fit and forget" solution for car owners who want reduced maintenance and better overall reliability.

Installation and Adjustment:

• Direct Fit Replacement: These bushings are designed as a direct replacement for the stock rubber bushings, offering the same fitment while adding adjustability. No major modifications are typically required, making installation easier for those familiar with suspension work.
• Alignment Precision: Once installed, these bushings allow precise adjustments to the suspension alignment, which is ideal for correcting issues that arise from modifications like lowering the vehicle or installing performance suspension components.

Ideal for:

• BMW E30 (3 Series)
• BMW Z3
• BMW E21 (3 Series)
• BMW 2002

These adjustable rear trailing arm bushings are perfect for enthusiasts looking for more control over their vehicle’s alignment and handling, whether for street driving or performance applications. They offer a great balance of increased performance, durability, and adjustability without sacrificing daily driving comfort.

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
BMW 5 Series - 525i, 530i, 545i

These SPL parts adjustable rear camber arms replace OEM part number 33326770813

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using 6061-T6 aluminum tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

These rear camber arms allow for significantly greater camber adjustment over stock, a major benefit to lowered cars that need their camber readjusted to prevent tire wear and poor handling. These camber arms also provide increased stability and predictability versus the stock camber arms with rubber bushings.

Technical Specifications:

• Lightweight Aluminum, Titanium, and Chromoly construction
• Anodized Black for corrosion protection and durable finish
• Gundrilled center hex links for maximum weight savings
• Teflon lined FK Rod Ends
• Made in the USA

Fits the following BMWs:
1992-1999 E36 BMW All Submodels
1999-2006 E46 BMW RWD Models

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Ensure precise handling and performance with Megan Racing Inc.'s reinforced and adjustable control arms, specially designed for aggressive driving and tuning. Constructed from lightweight steel-alloy, these control arms are built to withstand extreme competition while offering enhanced adjustability. Powder-coated with a 3-stage process, they provide durability and protection against the elements. Compatible with Mini Cooper F56 3-Door Hatch 2014+ and F55 5-Door Hatch 2015+ models, these control arms offer a direct replacement for rear lower arms.

• Reinforced and adjustable control arms for precise handling
• Lightweight steel-alloy construction for durability
• Powder-coated with a 3-stage process for protection against the elements
• Compatible with Mini Cooper F56 and F55 models
• Direct replacement for rear lower arms