BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.

Watch to learn more about Turner Monoball Bushings

Design:

OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:

Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness

BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.

Watch to learn more about Turner Monoball Bushings

Design:

OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:

Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness

MINI R56 Front Control Arm - Rear Bushings With Brackets offers an upgraded solution for Mini Gen 2 models (R55-R59), providing enhanced durability and performance. Featuring pre-installed Powerflex polyurethane bushings within high-quality Chassis Technology Europe (CTE) brackets, this setup is ideal for owners seeking a straightforward installation without the hassle of pressing or pulling tools.

• Designed for MINI R56 models, also compatible with R55-R59, for a precise fit
• Pre-installed Powerflex bushings offer improved handling and longevity over stock rubber bushings
• High-quality polyurethane construction withstands wear and maintains performance longer than traditional bushings
• CTE-supplied brackets simplify installation by eliminating the need for additional pressing or pulling tools
• Enhances steering response and stability, making it ideal for both daily driving and spirited performance
• Reduces maintenance time and cost with a simple bolt-on solution
• Provides a more stable and controlled ride experience, especially during cornering

The Powerflex Front Lower Control Arm Bushings for the BMW F85 X5 M and F86 X6 M are engineered to enhance the performance and dynamics of the front suspension. By replacing the factory rubber bushings with high-quality polyurethane, these bushings offer significant improvements in handling, stability, and durability.

Key Benefits:

1. Improved Handling Dynamics: The stiffer polyurethane material minimizes flex in the control arm, which enhances steering response and cornering stability. This upgrade allows for more precise handling, helping drivers navigate turns with greater confidence and control.

2. Exceptional Durability: Powerflex bushings are designed to withstand harsh driving conditions and resist wear from heat, oil, and road debris. Unlike traditional rubber bushings, which can deteriorate over time, these polyurethane bushings maintain their integrity and performance over a longer lifespan.

3. Enhanced Road Feedback: The firmer bushings provide better feedback to the driver, improving the overall driving experience. This enhanced connection between the vehicle and the road translates to increased confidence during spirited driving or challenging road conditions.

4. Easy Installation: Designed specifically for the F85 X5 M and F86 X6 M models, these bushings are a direct fit for the existing control arm mounts. This ensures a straightforward installation process without the need for modifications, making it a suitable upgrade for both professionals and DIY enthusiasts.

5. Versatile Performance: Whether used for everyday driving or high-performance applications, these bushings optimize the front suspension geometry, improving tire contact with the road and enhancing overall vehicle handling.

This upgrade is perfect for BMW F85 X5 M and F86 X6 M owners looking to boost their vehicle's front suspension performance and responsiveness. The Powerflex Front Lower Control Arm Bushings provide a reliable solution for enhancing handling, stability, and overall driving enjoyment, making them ideal for various driving styles and conditions.

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely.

The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex.

Features:

Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction
Correct ball joint angle for full articulation
Clamp design allows for easy access to lock down your alignment settings
Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends
Multiple size stainless steel roll center spacers for precise adjustment

The Powerflex Front Lower Control Arm to Subframe Bushings (Heritage) for the BMW E28 5 Series and E24 6 Series offer a balance of classic style and modern performance.

• Heritage Design: Retro-inspired look with advanced polyurethane material for long-lasting durability.
• Enhanced Handling: Reduces movement between the control arm and subframe, improving steering precision and overall stability.
• Durable Polyurethane: Stronger than rubber, resisting wear and damage from road elements.
• Easy Fit: Direct replacement for original bushings, ensuring a straightforward upgrade.

Ideal for vintage BMW owners who want to improve suspension performance while preserving the car’s classic feel.

MINI F55 to F57 Front Control Arm Front Bushings With Fixed Camber Offset are engineered to enhance wheel geometry and performance. Featuring CNC-machined aluminum outer shells with a fixed offset bore, these bushings are designed to withstand curb strikes and the extreme lateral forces from slick tires and circuit racing. The bushings are made from Black 95A durometer material with a knurled bore, offering increased stiffness (+60%) and durability compared to OE rubber bushings. This design minimizes control arm stiction and significantly reduces deflection.

• Enhanced Durability: CNC-machined aluminum outer shells with fixed offset bore provide superior strength and resilience.
• Improved Stiffness: Black 95A durometer bushings offer increased stiffness (+60%) over factory rubber, reducing deflection and control arm stiction.
• Optimized Camber: Increases negative camber by 0.75°, improving grip and wheel geometry.
• Tested Performance: Approved by the Mini Challenge in the UK for reliable, grip-focused wheel alignment.
• Advanced Construction: Knurled bore ensures a secure fit and enhanced durability under extreme conditions.

These bushings are ideal for those seeking improved handling and performance for their MINI F55 to F57.