Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

In BMWs with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

• Adds up to 10+ Horsepower
• Dramatic sound improvement
• Super fast install and removal
• Improves throttle response 
• Retains OEM airbox base as a heat shield
• Retains OEM cold air ducting
• Looks great under the hood
• Cleanable and reusable filter
• Made in the USA

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Upgraded replacement for your crankcase vent hose P#11127584128 featuring upgraded silicone, stainless steel clamps, and new OE connectors and seals.

Enhance your BMW N55 engine with our Silicone Crank Case Vent Hose, a premium replacement for the fragile, failure-prone factory hose. Over time, the stock plastic hose deteriorates due to constant exposure to heat and oil, leading to cracks and leaks. Our solution? A high-quality silicone hose engineered for superior durability and long-term reliability.

To further enhance performance, we’ve lined the hose with fluorosilicone, providing exceptional resistance to oil and chemical degradation. Designed in-house using advanced CAD modeling and 3D scanning, this hose offers a precise OEM fit while eliminating the common weaknesses of plastic construction.

Each kit includes stainless steel hose clamps for a secure, hassle-free installation. Whether you’re replacing a worn-out CCV hose or upgrading for added peace of mind, this premium solution ensures your BMW N55 runs smoothly and efficiently for years to come.

Features:

Arrives preassembled with new OE fittings and seals
Direct OEM Fit – Retains factory hose dimensions while eliminating reliability issues.
High-Performance Silicone – Resists heat-related wear for long-lasting durability.
4-Ply Fluorosilicone Lining – Superior protection against oil and chemical exposure.
Stainless Steel Clamps Included – Secure installation and extended service life.
Give your BMW N55 the reliability it deserves—upgrade to the ECS Tuning Silicone CCV Hose today!

Upgrade your BMW's air filtration system with the Turner Motorsport Exact-Fit High Flow Dry Air Filter. This direct replacement for your factory air filter offers superior airflow, allowing your engine to breathe better and enhancing both power and fuel economy. Enjoy immediate performance gains with this reusable filter, which outperforms stock paper filters and requires minimal maintenance.

Key Benefits:

• Improves engine breathing for better performance
• Enhances power throughout the power band
• Increases fuel economy
• Reusable filter for long-term savings
• Easy installation as a direct OEM replacement

Oiled versus Dry Filters:

Although both options will keep the air to your engine clean and improve airflow, there are a few differences to consider when choosing the best filter for you. Oiled filters do allow slightly better airflow than dry filters, however they require more maintenance. Oiled filters will likely get dirty faster, needing to be cleaned more regularly. When cleaning an oiled filter, it is necessary to oil them with filter oil afterwards. This filter will save you money by no longer needing to replace a paper filter.

Dry filters offer slightly lower airflow but are easier to maintain while still outperforming the OE paper filter. Dry filters can be washed with warm soapy water. There is no oiling necessary afterwards.

Both dry and oiled filters flow better than stock and can be reused.

Upgrade your BMW's performance with the BMS N54 BOV Vacuum Adapter, a plug-and-play solution that enhances engine vacuum functionality. Easily attachable to the throttle body/brake booster vacuum line, this adapter provides two extra 1/8" NPT vacuum ports, offering versatile applications like replacing vacuum lines to diverter valves, connecting boost gauges, and more.

• Quick and hassle-free installation
• Two additional 1/8" NPT vacuum ports for multiple applications
• Ideal for replacing engine vacuum lines to diverter valves
• Enables a larger diameter boost reference to aftermarket BOV
• Perfect for adding extra boost gauges and accessories
• CNC machined for precise fit and durability
• Dual internal O-rings and retaining clip for a secure, factory-like seal
• Basic kit includes adapter, two 1/8" NPT caps, and one 1/8" vacuum nipple
• BOV kit adds two push lock fittings and 1/4" line for Tial BOV installation
• Made in the USA for quality assurance

Enhance your BMW's performance and functionality with the BMS N54 BOV Vacuum Adapter – a versatile, plug-and-play solution made in the USA.

Upgrade your BMW's air intake system with Turner Motorsport's Exact-Fit High Flow Dry Air Filter! This direct replacement for the factory air filter improves engine breathing, resulting in increased power throughout the power band and enhanced fuel economy. Key benefits include:

• Higher flow than stock paper filters
• Immediate increase in performance
• Reusable design saves money on filter replacements
• Dry filter design requires less maintenance
• Easy to clean with warm soapy water
• Only needs cleaning every 50,000 miles under normal highway driving conditions

Be sure to check out the full line of filter cleaning supplies Turner Motorsport has to offer!

ECS Tuning Silicone Turbo Inlet Hose – MINI Cooper S/JCW N14 (R55-R59)

Upgrade your MINI Cooper N14 with our high-flow silicone turbo inlet hose, featuring increased internal volume for greater airflow, a smooth interior finish for an uninterrupted flow path, and more available air for your turbo to consume, resulting in enhanced performance and throttle response.

Unlike the factory plastic inlet hose, which degrades over time and was never engineered with performance in mind, the ECS Tuning replacement features a durable, 4-ply silicone construction with wire reinforcement to handle higher temperatures and boost levels. Reinforced sections help prevent flex and collapse under load, and a smooth internal profile with a counterbored outlet reduces turbulence for optimized airflow to the turbocharger.

ECS Tuning also addresses a known issue where the OEM hose can walk off the turbo inlet and ingest the included gasket, often leading to premature turbo failure. This upgraded design provides a much more secure fit and peace of mind for performance-minded MINI owners.

Product Features

Constructed from heavy-duty, 4-ply fiberglass-reinforced silicone

Designed to resist collapse, distortion, and degradation from heat, oil, and fuel exposure

Smooth interior walls and gradual taper ensure unimpeded, efficient airflow

Includes spacers/adapters to accommodate factory or common upgraded turbo sizes

Gloss black finish adds a clean, high-performance appearance to the engine bay

Stainless steel smooth-band hose clamps are included for secure installation

Engineered to handle continuous operating temperatures up to 250°F

Direct replacement for the OE turbo inlet hose—no tuning required

Kit Includes

(1) Silicone turbo inlet hose
(2) Silicone turbo inlet rings for size adaptation
(3) Smooth-band stainless steel hose clamps
Engineering and Development
Designed, tested, and quality-inspected at ECS Tuning’s in-house R&D facility in Wadsworth, Ohio. Utilizing precision tools like FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping, ECS ensures perfect fitment and long-term durability.

Installation Notes
Installation is simple and fully reversible. Remove the stock inlet hose and install the ECS silicone hose using the included clamps and spacers as needed. No permanent modifications required.

Not legal for sale or use in California on any pollution-controlled motor vehicle in accordance with the California Air Resources Board (CARB).

The S55's factory intake system is a major bottleneck, muting its aggressive twin-turbocharged soundtrack and restricting performance. Oversized airboxes, restrictive paper filters, and charcoal pre-filters choke airflow, limiting power and induction noise. The result? An underwhelming driving experience that doesn’t do the twin-turbo-six justice.

ECS aims to solve this issue with their Luft-Technik Performance Intake System—engineered to optimize airflow, amplify induction sound, and completely transform your engine bay. By replacing the factory restrictions with a high-flow design, this system unleashes the S55’s true potential, delivering sharper throttle response, enhanced turbo efficiency, and an intoxicating intake note.

At its core, the Luft-Technik intake is comprised of dual aluminum inlet tubes, designed for both strength and function. Constructed from 6061 aluminum and finished in a wrinkle black powder coat, these tubes are built to withstand high engine bay temperatures and extreme conditions. Using advanced CAD modeling, ECS engineers optimized the tubing shape to ensure perfect MAF sensor scaling, maintaining factory AFR (air-to-fuel ratio) for peak reliability and efficiency. The unique ovular profile maximizes clearance around critical engine components while allowing for the largest possible inlet diameter. The crossover tube features standoffs for secure heat exchanger hose mounting and a CNC-machined 6061-T6 billet aluminum MAF flange and vacuum port, ensuring seamless integration with factory connections.

To prevent heat soaking and maintain consistent performance, our intake system incorporates precision-cut aluminum heat shields. Finished in a durable wrinkle black powder coat, the heat shields feature a rubber edge trim that seals against the hood, preventing engine bay heat from infiltrating the air intake tract. This results in lower intake air temperatures (IATs), improved air density, and overall improved performance even under demanding conditions.

Key Features:

Aluminum Inlet Tubes 6061 aluminum construction for durability and heat resistance Wrinkle black powder coat for a sleek, OEM+ finish Optimized ovular shape for maximum clearance and airflow Gradual transitions eliminate sharp bends for smoother intake flow MAF scaling matched to factory specs for precise AFR control CNC-machined 6061-T6 MAF flange and vacuum port for OEM fitment Aluminum Heat Shields One-piece aluminum construction for durability and heat isolation Wrinkle black powder coat for a stealthy appearance and heat resistance Rubber edge molding creates a perfect seal against the hood, blocking hot air Mounts to factory locations for hassle-free installation High-Flow Dual-Cone Air Filters 8-ply cotton gauze construction for superior filtration and flow Bellmouth 3" flange inlet minimizes turbulence and maximizes efficiency Enhanced induction noise for an aggressive turbocharged soundtrack Installation & Support:

Click HERE for a guided installation tutorial!