BMW Springs

Emmanuele Design Lowering Spring Set - F80 M3

T#:555227

Part#: EMD-F80-LS

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.

Show More Show Less

Emmanuele Design Lowering Spring Set - F82 F83 M4

T#:568357

Part#: EMD-F82-LS

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.

Show More Show Less

Eibach Pro-Kit Spring Set - F87 M2 & M2 Competition

T#:402657

Part#: E10-20-035-01-22

In Stock at Vendor

10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Qty

10% off MSRP

$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

Front - 1"
Rear - .8"

Show More Show Less

MMX Performance Lowering Spring Kit - BMW G42 230i/M240i RWD ...

T#:31656075

Part#: MMR08-1702

Ships in 2 Business Days

$ 332.99 USD

Add to Wish List

Qty

$ 332.99 USD

Add to Wish List

MMX Performance Lowering Springs for the BMW G42 230i strike the ideal balance between sharper handling and a more aggressive stance, all without compromising ride comfort. With a drop of approximately 20mm at the front and 15mm at the rear, the G42 gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in. Lowering the car’s centre of gravity makes a real difference to the way it drives. Body roll is noticeably reduced, turn-in feels sharper, and overall dynamics are greatly improved, all while retaining the comfort and refinement you’d expect from a BMW. Thanks to carefully chosen progressive spring rates, low-speed ride quality remains smooth and, in fact, actually feels more composed around town. But push on and the G42’s chassis comes alive: it feels lighter on its feet, more direct, and properly responsive through the corners. Just what the 230i needed. Visually, the difference is just as striking. The lower ride height gives the car a more aggressive, purposeful stance without being over-the-top. Go any lower or firmer than these, and you risk upsetting the balance, leading to a crashy, unsettled ride. That’s why MMX Springs are engineered specifically to work in harmony with both static and Adaptive M dampers. Features: 20mm front / 15mm rear drop for a sportier stance. Sharpened handling with reduced body roll. Smooth ride quality thanks to progressive spring rates. More responsive chassis feel at higher speeds. Compatible with adaptive & static dampers. No bouncing or crashing – perfectly matched spring rates Premium Metallic Grey finish Direct fit for BMW 230i G42

Show More Show Less

Eibach Pro-Kit Performance Springs - BMW F30 335i 340i xDrive ...

T#:578367

Part#: E10-20-031-06-22

Back Ordered

10% off MSRP $ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Qty

10% off MSRP

$ 439.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Eibach's PRO-KIT delivers high-performance handling and improved appearance, without compromising ride quality. High-Performance Handling and Aggressive Good Looks Lower Center of Gravity Stop Quicker, Corner Faster Progressive Spring Design for Excellent Ride Quality Million-Mile Warranty Note: Tested with factory dampers

Show More Show Less

Eibach Pro-Kit Spring Set - E9X M3

T#:377839

Part#: 20100.140

In Stock

10% off MSRP $ 439.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Qty

10% off MSRP

$ 439.24

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 395.00 USD

Add to Wish List

Looking to lower your BMW for a sportier appearance and improved cornering, performance, and aerodynamics? This spring kit from Eibach is a perfect solution to lower the ride height without compromising the ride quality of your BMW.

With this kit, you can expect an average lowering of:

Front - .8"
Rear - .6"

Show More Show Less

MMX Performance Lowering Spring Kit - BMW F32 xDrive

T#:43784136

Part#: MMR08-0810

Ships in 2 Business Days

$ 332.99 USD

Add to Wish List

Qty

$ 332.99 USD

Add to Wish List

MMX Performance Lowering Springs deliver a perfect blend of enhanced handling and a more aggressive stance, all while preserving everyday ride comfort. Lowering the front by up to 30mm and the rear by up to 25mm, these springs give your 4-Series a more planted feel, with improved responsiveness, reduced body roll, and sharper turn-in characteristics.

Show More Show Less

Traction-S Springs

T#:2347993

Part#: LS-TS-MC-0004

Ships in 2 Business Days

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

T#:590105

Part#: ASTLS-14-2686

In Stock at Vendor

$ 242.00 USD

Add to Wish List

Qty

$ 242.00 USD

Add to Wish List

AST Suspension Lowering Springs for the 2013+ BMW i3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available. AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

Show More Show Less

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

T#:7640374

Part#: ASTLS-21-080

In Stock at Vendor

$ 461.99 USD

Add to Wish List

Qty

$ 461.99 USD

Add to Wish List

AST LOWERING SPRINGS ARE MANUFACTURED FROM A PREMIUM HIGH TENSILE CHROMIUM-SILICONE WIRE WHICH IS HANDPICKED BY AST ENGINEERS FOR ITS QUALITY AND METAL CONSISTENCY. Each spring is cold wound and then heat-treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated, and then powder coated to outlast even the life of the vehicle. FEATURES Progressive rates on most vehicles EDC Compatible (if applicable to vehicle) Each spring is blocked and computer tested prior to shipping, which reduces any settling once installed on the vehicle Most of our spring applications are TUV Certified and certificates can be provided upon request LOWERING RANGE Front: Approx. 30MM Rear: Approx. 15MM VEHICLE FITMENT Make: BMW Model: G80 M3 RWD + G80 M3 XDRIVE (AWD) Years: 2021 - On

Show More Show Less

MMX Lowering Springs - F8x M3/M4

For Vehicles Without Adaptive Suspension

T#:4565853

Part#: MMR08-1001

Ships in 2 Business Days

$ 263.99 USD

Add to Wish List

Qty

$ 263.99 USD

Add to Wish List

MMX's Performance lowering spring kit delivers the perfect blend of improved handling, enhanced looks, and maintains ride quality. The drop in ride-height makes a huge difference to the handling characteristics making the vehicle feel lighter and much more nimble. Finished in MMR blue, the lowering springs provide a drop at the front of 25mm and at the rear 15mm. Thanks to the spring rates the ride-quality remains relatively unaffected, but through corners the chassis really comes to life. Features: Lowers vehicle by 25mm front | 15mm rear Powder coated in MMR blue for a durable finish

Show More Show Less

aFe Control Lowering Springs BMW M3 (E90/92) 08-13

T#:557614

Part#: 410-503006-N

Ships in 2 Business Days

$ 376.00 USD

Add to Wish List

Qty

$ 376.00 USD

Add to Wish List

Eliminate the stock fender gap - works great with stock shocks!

Part#: MMR08-1911

Ships in 3 Business Days

$ 467.99 USD

Add to Wish List

Qty

$ 467.99 USD

Add to Wish List

MMX Performance Lowering Springs for the BMW G99 M5 Touring xDrive strike the ideal balance between sharper handling and a more aggressive stance, all without compromising ride comfort. With a drop of approximately 25mm at the front and 15mm at the rear, the G99 gains a more planted feel, offering improved responsiveness, lighter dynamics, and noticeably crisper turn-in.

SELECT YOUR BMW

Sub-Categories

Emmanuele Design Lowering Spring Set - F80 M3

Emmanuele Design Lowering Spring Set - F82 F83 M4

Eibach Pro-Kit Spring Set - F87 M2 & M2 Competition

MMX Performance Lowering Spring Kit - BMW G42 230i/M240i RWD ...

Eibach Pro-Kit Performance Springs - BMW F30 335i 340i xDrive ...

Eibach Pro-Kit Spring Set - E9X M3

MMX Performance Lowering Spring Kit - BMW F32 xDrive

Traction-S Springs

AST Suspension Lowering Springs - BMW i3/i3 RANGE EXTENDER

AST Lowering Springs - BMW G80 M3 & M3 Comp (RWD & xDrive)

MMX Lowering Springs - F8x M3/M4

aFe Control Lowering Springs BMW M3 (E90/92) 08-13

Traction-S Springs R60

MMR Height Adjustable Lower Springs - BMW G80 M3, G82 M4, G87 M2 ...

MMR Performance Lowering Springs - F87 M2

MMX Performance Lowering Spring Kit - BMW F31 RWD

MMX Performance Lowering Springs - BMW G99 M5 Touring

MMX Performance MINI Cooper R56 / JCW / GP2 Lowering Spring Set ...

MMX Performance Lowering Spring Kit - BMW F36 RWD

MMX Performance Lowering Springs - F82 M4

MMX Performance Lowering Spring Kit - BMW F31 XDrive

MMX Performance Lowering Spring Kit - BMW F32 RWD

MMX Performance Lowering Springs - BMW G90 M5 XDrive

MMR Performance Lowering Springs - F80 M3

MMX Lowering Springs - F2x M235i

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results