Sport / Lowering Springs

Emmanuele Design Lowering Spring Set - F82 F83 M4

T#:568357

Part#: EMD-F82-LS

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.

Show More Show Less

Emmanuele Design Lowering Spring Set - F80 M3

T#:555227

Part#: EMD-F80-LS

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.

Show More Show Less

Emmanuele Design Lowering Spring Kit - F87, F22, F23

T#:23218024

Part#: EMD-F87-LS

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Provides lowering of 1.3" in the front and 0.9" in the rear. Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature.

Show More Show Less

Lowering Spring Kit

T#:381342

Part#: MRLSBX507

Ships in 4 Business Days

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

The Megan Racing lowering spring kit improves your vehicle's looks and performance. Megan’s lowering springs lower the vehicle's center of gravity reducing body roll in the turns dive under braking squat during acceleration and give the car a more solid secure feel at all times. Springs manufactured from SAE 9254 cold wounded steel and spring rates carefully matched for your specific application. These springs are designed to work via your stock shock however aftermarket shocks are always recommended. Megan racing lowering springs also minimize the ugly fender gap that makes a car look "lifted” .

Show More Show Less

Dinan Performance Spring Set And Supplementary Ride Quality & Handlin...

T#:55353623

Part#: D100-0934KT2

Ships in 5 Business Days

$ 508.99 USD

Add to Wish List

Qty

$ 508.99 USD

Add to Wish List

We’ve taken two of Dinan’s most precisely engineered suspension upgrades and locked them into one ultimate chassis package.

Lowering Spring Kit

T#:381341

Part#: MRLSBF30

Ships in 4 Business Days

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

The Megan Racing lowering spring kit improves your vehicle's looks and performance. Megan’s lowering springs lower the vehicle's center of gravity reducing body roll in the turns dive under braking squat during acceleration and give the car a more solid secure feel at all times. Springs manufactured from SAE 9254 cold wounded steel and spring rates carefully matched for your specific application. These springs are designed to work via your stock shock however aftermarket shocks are always recommended. Megan racing lowering springs also minimize the ugly fender gap that makes a car look "lifted” .

Show More Show Less

Lowering Spring Kit

T#:381334

Part#: MRLSBE36

Ships in 4 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

EMD Lowering Spring Kit - BMW G80 M3

T#:35154916

Part#: EMD-G80-LS

Ships in 1 Business Day

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

After much anticipation, we are pleased to release our lowering spring kit for the BMW M3 G80 platform! Taking our experience from our highly popular F80 springs, the goal with this offering was to lower the M3 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal.

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.4"

Rear Lowering: 0.7"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

EMD Lowering Spring Kit - BMW G87 M2

T#:35154917

Part#: EMD-G87-LS

Ships in 9 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

After much anticipation, we are pleased to release our lowering spring kit for the BMW M2 G87 platform! Taking our experience from our highly popular F-chassis offerings, the goal with this offering was to lower the M2 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal.

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.3"

Rear Lowering: 0.75"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

BMW E90 Lowering Spring Kit

T#:381343

Part#: MRLSE90

Back Ordered

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

BMW E90 Lowering Spring Kit is designed to enhance both the appearance and performance of your vehicle. This Megan Racing Lowering Spring Kit significantly improves your BMW's aesthetics and handling dynamics by lowering the center of gravity, resulting in reduced body roll during turns, minimized dive under braking, and decreased squat during acceleration.

Improved Handling: Lowers the center of gravity to reduce body roll, brake dive, and acceleration squat.
Enhanced Aesthetics: Minimizes fender gap, giving your BMW a sleek and aggressive stance.
Durable Construction: Made from high-quality SAE 9254 cold-wound steel for long-lasting performance.
Precision Fit: Engineered specifically for the BMW E90, ensuring accurate spring rates and compatibility.
Optimal Performance: While compatible with stock shocks, aftermarket shocks are recommended for the best results.

Upgrade your BMW E90 with this Lowering Spring Kit from Turner Motorsport to achieve superior handling and a more aggressive look.

Show More Show Less

Lowering Spring Euro Version MR-LS-MC02 R50 R52 R53

T#:28869571

Part#: MR-LS-MC02

Ships in 4 Business Days

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

Megan Racing Performance Lowering Springs are crafted from SAE 9254 Cold Wounded Steel, renowned for its exceptional strength. With high tensile strength and a phosphate powder coating, these springs offer outstanding spring rates that resist premature sagging. The result is a spring that delivers racecar handling while maintaining smooth and comfortable ride characteristics. Carefully matched spring rates ensure exceptional handling, response, control, and balance. These springs provide a generous drop to your car while remaining streetable, offering enough clearance to avoid bottoming out. The lowered center of gravity enhances performance, stability, and appearance. (Note: Spring rates and drop amount may vary based on different vehicle applications and chassis load.) Specs: Lowering rate: Average 1.1" Front, 1.49" Rear (Note: Spring rates and drop amount may vary based on different vehicle applications and chassis load.) Spring Rates: - Front: 2.73 kgf/mm - Rear: 3.74 kgf/mm

Show More Show Less

Lowering Spring Kit - E92

T#:381344

Part#: MRLSE92

In Stock

$ 240.99 USD

Add to Wish List

Qty

$ 240.99 USD

Add to Wish List

Enhance the appearance and performance of your BMW with the Megan Racing Lowering Spring Kit.

These lowering springs from Megan Racing improve your vehicle's looks and handling by lowering the center of gravity, reducing body roll, dive under braking, and squat during acceleration. Crafted from SAE 9254 cold wound steel, these springs offer durability and precise spring rates matched for your specific BMW model. They work seamlessly with stock shocks, although aftermarket shocks are recommended for optimal performance. Say goodbye to the unsightly fender gap and achieve a sleek, lowered stance with Megan Racing lowering springs.

Improves vehicle's appearance and performance
Lowers center of gravity for reduced body roll
Enhances handling and stability
Crafted from durable SAE 9254 cold wound steel
Precisely matched spring rates for specific BMW models
Compatible with stock shocks (aftermarket shocks recommended)
Minimizes fender gap for a sleek, lowered stance

Show More Show Less

Lowering Spring Kit

T#:7624659

Part#: MR-LS-BE89

Ships in 4 Business Days

$ 222.00 USD

Add to Wish List

Qty

$ 222.00 USD

Add to Wish List

The Megan Racing lowering spring kit improves your vehicle's looks and performance. Megan’s lowering springs lower the vehicle's center of gravity, reducing body roll in the turns, diving under braking, squatting during acceleration, and giving the car a more solid secure feel at all times.

Show More Show Less

MINI R56 Lowering Spring Euro Version MR-LS-MC08

T#:28803231

Part#: MRLSMC08

Back Ordered

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Transform your Mini's handling with the MINI R56 Lowering Spring Euro Version MR-LS-MC08.

These lowering springs provide a Euro-inspired stance, enhancing both the look and performance of your Mini. Crafted with precision engineering, they offer improved handling and cornering capabilities, allowing for a more agile driving experience. With their high-quality construction and easy installation, they offer a hassle-free way to achieve a sportier appearance and superior handling.

Benefits:

Euro-inspired stance for enhanced aesthetics
Improved handling and cornering capabilities
Precision engineering for optimal performance
High-quality construction for durability
Easy installation for convenience

Show More Show Less

Project Cars

SELECT YOUR BMW

Emmanuele Design Lowering Spring Set - F82 F83 M4

Emmanuele Design Lowering Spring Set - F80 M3

Emmanuele Design Lowering Spring Kit - F87, F22, F23

Lowering Spring Kit

Dinan Performance Spring Set And Supplementary Ride Quality & Handlin...

Lowering Spring Kit

Lowering Spring Kit

EMD Lowering Spring Kit - BMW G80 M3

EMD Lowering Spring Kit - BMW G87 M2

BMW E90 Lowering Spring Kit

Lowering Spring Euro Version MR-LS-MC02 R50 R52 R53

Lowering Spring Kit - E92

Enhance the appearance and performance of your BMW with the Megan Racing Lowering Spring Kit.

Lowering Spring Kit

MINI R56 Lowering Spring Euro Version MR-LS-MC08

Transform your Mini's handling with the MINI R56 Lowering Spring Euro Version MR-LS-MC08.

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results