BMW Transmission Parts

Rein Transfer Case Fluid TF 0870 is designed to service your BMW xDrive transfer case, ensuring optimal performance and reliability. This genuine BMW fluid is essential for maintaining the efficiency of your transfer case, especially if you are nearing or exceeding the 60,000-mile mark. Using Rein Transfer Case Fluid TF 0870 helps to catch up on crucial maintenance and keep your vehicle running smoothly.

• Genuine BMW Fluid: Ensures compatibility and peak performance for BMW xDrive transfer cases.
• Optimal Performance: Helps maintain the efficiency of the transfer case, enhancing overall vehicle reliability.
• Preventive Maintenance: Ideal for vehicles approaching or exceeding 60,000 miles to ensure continued smooth operation.
• High-Quality Formulation: Designed to meet BMW's specifications for superior protection and longevity.

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

The DCT transmission in your BMW is nothing short of incredible and exhilarating, but also astronomically expensive to replace. BMW has been labeling fluids as "lifetime" for quite some time now, and as enthusiasts and owners have learned over the years, there simply is no fluid that last a lifetime.

This DCT service kit that takes the guesswork out of a fluid change . No need to track down the correct fluid and plugs, simply open the box, and get the job done the correct way. By servicing your DCT transmission, you will be assured that old, broken down fluid won't cause a several thousand dollar nightmare. We recommend this service every 40,000 miles to keep your transmission going strong for years to come.

Kit includes:

• 5 quarts of Pentosin DCTF-1 fluid
• DCT transmission cartridge and suction filters
• Drain and fill plugs

Please note: We include 5 quarts of DCT fluid because without a GT1 diagnostic tool and much more involved labor, you will not be able to replace over 5 quarts of fluid. Many elect to do this service and simply flush the fluid 5,000 miles later to ensure all fluid has been flushed, but this is not mandatory.

Both the cartridge and suction filters have their own challenges in replacing. For best results, replace both.

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es

The ZF 320z S5D is a common swap choice among BMW enthusiasts due to its reliable and robust nature. Unfortunately, it does have a weakness. The detent pins and springs that live inside of the transmission are known to wear down over time, often causing the shift lever to lean towards the 5th gear position when in neutral.

This full-service kit consists of everything you need to replace the failing detents in your ZF transmission. The kit contains only Genuine ZF components, all of which are sure to provide you with smooth shifting and operation for years to come.

This kit includes the following items:

3 Shift Pin Kits - 23117525048
2 Slide Bushings - 23117533395
2 Gearbox sealing lids - 23311224825
1 Shifter detent pin - 23311224849
1 Shifter detent pin - 23317502165
2 Lock Rings - 23317531374
3 Spring Retention Plates - 23317637524
5 Detent Drift/Punch Tools - 054834LA01AKT
Remedying the ZF's detent issue is a must for any enthusiast planning to get the most out of their transmission. Proper centering is essential for quick and smooth shifting, both being desirable features in any application. This kit is easy to install with several DIY guides existing online. A set of "drift" tools are included for proper installation.

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. 

Kit Includes:

• Automatic transmission oil pan with integrated filter 
• Oil pan gasket
• Drain plug with sealing washer
• Fill plug with sealing washer
• 7 quarts Redline D4 automatic transmission fluid

Fits the following BMWs:
E84 BMW X1 xDrive35i
​E90 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission), 330i/xi, 335i/xi
​E91 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission)
​E92 BMW 328i/xi (with GA6HP19Z automatic transmission), 335i/x
​E93 BMW 328i (with GA6HP19Z automatic transmission),  335i
E60 BMW 525i/xi, 528i/xi, 530i/xi, 535i/xi
E61 BMW 525i, 530xi, 535xi
E70 BMW X5 xDrive30i
E71 BMW X6 35iX
E82/88 BMW 128i(with GA6HP19Z automatic transmission), 135i (N54)
F01/02 BMW 740i/Li
E85/86/89 BMW Z4 3.0i/Si sDrive30i M54 N52

BMW E46 E82 E9X Differential Rebuild Kit Plus includes all the essentials to restore your differential to like-new condition. Designed specifically for BMW models, this comprehensive kit provides high-quality components that ensure optimal performance and longevity of your vehicle's differential system.

Benefits:

• Complete Restoration: Contains everything needed for a full differential rebuild, ensuring reliability and performance.
• High-Quality Components: Each part is crafted to meet or exceed OEM specifications, guaranteeing durability and longevity.
• Improved Performance: Restores smooth operation, enhancing traction and handling characteristics.
• Cost-Effective Solution: Save money by rebuilding your differential instead of replacing it entirely.