BMW Transmission Parts

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

T#:1002349

Part#: 228053410

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

N54/N55 BMW Automatic Transmission Cooler - E9X 335

T#:1347205

Part#: N54N55TRANSCOOL

In Stock

$ 444.99

This product was last offered at the strikethrough price on
06-16-2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Everyone knows that heat is the enemy of your automatic transmission. And everyone knows that higher power levels generate more transmission fluid heat. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity fender-mounted air-to-trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs inside the driverside fender providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW E chassis automatic running larger than factory turbos. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity Fitment: 2006-2011 E90 Sedan 335i/335ix 2006-2013 E90 E91 Sedan/Touring 335d (M57 diesel) 2006-2011 E91 Touring 335i/335ix 2011-2013 E92 Coupe 335is 2007-2013 E92 Coupe 335i/335ix 2006-2013 E93 Convertible 335i/335ix Compatible with both RHD and LHD vehicles. Not compatible with manual transmissions.

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

T#:1002348

Part#: 228053400

Back Ordered

$ 296.99 USD

Add to Wish List

Qty

$ 296.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

T#:1002350

Part#: 228053420

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

ECS Urethane Transmission Mounts

T#:388091

Part#: 002705ECS

In Stock

Sale - Save 10% $ 117.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 106.19 USD

Add to Wish List

Sale - Save 10%

$ 117.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 106.19 USD

Add to Wish List

A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs:
1989-1995  E34 BMW  525i 530i 535i 540i M5
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2003  E39 BMW  525i 528i 530i 540i M5
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
2008-2012  E82 BMW  128i 135i 1M Coupe
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Fall-Line Motorsports - Aluminum DCT Hydraulics Cover - Multiple BMW ...

T#:5498480

Part#: FLM-DCT-HC

In Stock

$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD

Limited Qty Sale

Add to Wish List

Like the DCT oil pan, the plastic OEM hydraulics cover is prone to fatiguing from heat cycling; not ideal considering the important parts that reside behind it. And also like it's oil pan sibling, the Fall-Line hydraulics cover uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.

Show More Show Less

E60 M5 SMG, E63 M6 SPEC Twin-Disk Performance Clutch Kit

T#:340443

Part#: SB60SST

Ships in 3 Business Days

Starting at $ 1,799.00 USD

Add to Wish List

Starting at $ 1,799.00 USD

Add to Wish List

The Super Street Twin disc clutch gives you a worry-free twin-disc clutch upgrade for the E60 M5 and E63 M6. This flywheel and clutch kit features twin carbon fiber/organic discs with a steel flywheel rated at over 900 ft-lbs of torque. Even with increased capability this clutch drives and functions almost the same as a stock clutch but with a more solid feel and better engagement. Where the stock clutch can feel weak and soft the SPEC clutch feels stronger and more capable. The SPEC flywheel included in this kit is also a superior alternative to the pricey factory dual-mass flywheel, which are known to wear out. If clutch or flywheel woes are keeping you from getting the most from your V10 this is the clutch you should be using.

The SPEC clutch upgrade for the M5/M6 gives you a true twin disc clutch setup in the SMG models. Twin disc clutches have been common in racing events for years. Our World Challenge Touring Cars were among the first to use two or three disc racing clutches in BMW applications. We found many advantages to a multi-disc setup over a single disc - greater torque capacity, less heat build-up, and longer clutch life thanks to more surface area, and less weight in the clutch discs. One of the goals from SPEC was to keep clutch operation and noise as close to stock levels as possible. They use a special blend of organic, carbon, Kevlar, and metallic materials for a strong and durable clutch that is also user friendly on the street. This kit is supplied with a billet steel flywheel that better minimizes vibrations and clutch chatter than aluminum. The SPEC flywheel is also preferred over the factory dual-mass part which can wear out over time and need replacement anyway. Clutch rebuild parts are also available to minimize consumable costs and keep your car ready to use.

More aggressive clutch materials are available. The kit comes with a carbon fiber/Kevlar/organic material that is best-suited for street use and will offer the most user-friendly feel and engagement. For more performance capability you can opt for a carbon-graphite material but it will not be as user-friendly on the street. The carbon-graphite offers tremendous torque limits (1,125 ft-lbs) but the material will result in a more abrupt clutch engagement with less usable slippage.

SPEC Clutch is one of the premier clutch and flywheel suppliers to the tuner market. They are often found on the most highly tuned import and domestic vehicles. They are recent players in the German car community with a special focus on the newer turbo BMW models with high torque output. SPEC has been proven time after time to provide superior performance, drivability, and longevity to the most hardcore enthusiasts around the globe.

E60 M5 E63 M6 SPEC Clutch Kit contents:
+ billet steel flywheel
+ twin-disc clutch plates with friction surface
+ heavy-duty pressure plate
+ heavy duty throw-out bearing

This item fits the following BMWs with SMG transmission:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6

Show More Show Less

BMW Transmission Service Kit - 135i/335i

T#:24179123

Part#: XMS230BM022EXC

Ships in 3 Business Days

$ 735.99 USD

Add to Wish List

Qty

$ 735.99 USD

Add to Wish List

Fall-Line Motorsports - Ultimate DCT Track Package - Multiple BMW Fit...

T#:5498483

Part#: FLM-DCT-PKG

Back Ordered

$ 1,999.00 USD

Add to Wish List

Qty

$ 1,999.00 USD

Add to Wish List

The Ultimate DCT Track Package. Period! Fall-Line has designed an incredible 6061-T6 aluminum oil pan and matching hydraulics cover for DCT cars. The plastic OEM parts are prone to failure from heat-cycling and use a brittle gasket that requires replacement over time. The Fall-Line parts use a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.

Show More Show Less

Fall-Line Motorsports - Aluminum DCT Oil Pan - Multiple BMW Fitments ...

T#:5498479

Part#: FLM-DCT-PAN

Back Ordered

$ 899.00 USD

Add to Wish List

Qty

$ 899.00 USD

Add to Wish List

The plastic OEM pan is prone to leaking and uses a brittle gasket that requires replacement over time. The Fall-Line pan uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.

Show More Show Less

VTT Plug And Play Wireless Xdrive Controller - BMW G01/02 G05 G06 G14...

T#:30497148

Part#: VTT-XDRIVE-CONTR

In Stock

$ 208.99 USD

Add to Wish List

Qty

$ 208.99 USD

Add to Wish List

VTT now offers the ONLY easy-to-install, plug-and-play xDrive controller on the market. This device will allow you to turn off and on your xDrive capability from the driver's seat with a remote. While other options do exist such as X-Delete, or an in-dash gauge, one is a very slow process and is not viable to use as a way to do a burnout at the drag strip, and the other is a very expensive, AND very intrusive device that requires removal of most of the dash, and installing a gauge. VTT's solution takes 30 seconds to install once you gain access to the underside of the vehicle, and can be removed just as easily.

Show More Show Less

MMX DCT Transmission Oil Cooler - E9x M3

For Vehicles with DCT Only

T#:4538241

Part#: MMR17-0202

Special Order: No Guaranteed ETA

$ 851.99 USD

Add to Wish List

Qty

$ 851.99 USD

Add to Wish List

MMX's Performance Transmission cooler is a direct upgrade for the E9x M3 DCT cooler. Perfect for upgraded vehicles such as those with superchargers or those simply needing a more reliable option over the OEM cooler. This upgraded cooler will help keep your gearbox oil temperatures in check be it on or off the track. Dimensions: Width: 30cm Height: 23cm Depth: 4cm

Show More Show Less

Transmission Oil Cooler Regulator Valve

T#:302929

Part#: 17211437772-987

Ships on Dec 23, 2026

Sale - Save 4% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.52 USD

Add to Wish List

Qty

Sale - Save 4%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.52 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

N54/N55 BMW Automatic Transmission Cooler - E9X 335

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

ECS Urethane Transmission Mounts

Fall-Line Motorsports - Aluminum DCT Hydraulics Cover - Multiple BMW ...

E60 M5 SMG, E63 M6 SPEC Twin-Disk Performance Clutch Kit

BMW Transmission Service Kit - 135i/335i

Fall-Line Motorsports - Ultimate DCT Track Package - Multiple BMW Fit...

Fall-Line Motorsports - Aluminum DCT Oil Pan - Multiple BMW Fitments ...

VTT Plug And Play Wireless Xdrive Controller - BMW G01/02 G05 G06 G14...

MMX DCT Transmission Oil Cooler - E9x M3

Transmission Oil Cooler Regulator Valve

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results