Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

TRW - Corporate Logo
T#:304215
Part#: 31102283578
Ships in 6 Business Days
$ 145.99

This product was last offered at the strikethrough price on
04-28-2026

$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping

Improve your BMW's driving experience by addressing the wear and tear caused by years on the road. The suspension takes a beating from pot holes, speed bumps, and road hazards, leading to a weakened and sloppy feel. Enhance safety and ride comfort by replacing worn components, such as the control arm.

  • Improved driving experience and ride comfort
  • Enhanced safety through the replacement of worn suspension components
  • Non-serviceable ball joints and other components addressed for prolonged lifespan
  • Control arm replacement for a better feel and handling
  • Recommended replacement in pairs for optimal performance
  • Suitable for both front and rear suspension upgrades
  • Referred to as a wishbone by BMW
  • Performance upgrade for non-M3 models, recommended to replace in pairs due to heavy-duty nature
Show More Show Less
TRW - Corporate Logo
T#:304217
Part#: 31102283577
In Stock
42% off MSRP $ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping
42% off MSRP
$ 171.03

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD
Free Shipping

Enhance your driving experience with our premium suspension upgrade for your BMW. Over time, the road can take a toll on your suspension, leading to a sloppy and weak feel while driving. Our solution? Replace the control arm – a critical component that, after years of service, may wear out. Boost safety and ride comfort with this easy upgrade.

  • Improved driving experience
  • Enhanced safety
  • Better ride comfort
  • Extended service life of replacement parts

If you're considering replacing any part of your front or rear suspension, opt for doing it in pairs (both left and right sides). This ensures optimal performance and longevity of the replacement parts. In the BMW world, it's often referred to as a wishbone.

For non-M3 models, this isn't just a replacement – it's a performance upgrade. These heavy-duty components are recommended to be replaced in pairs to maximize their efficiency and provide a seamless driving experience.

Show More Show Less
TRW - Corporate Logo
T#:304216
Part#: 31102283575
In Stock
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping
This left/driver's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401372
Part#: IRPCA-ST
In Stock
$ 233.99 USD
Free Shipping
$ 233.99 USD
Free Shipping

If you are looking for a wider range of camber adjustability in the rear of you car, the IRP Adjustable rear lower control arm is exactly what you need! Built to be much stronger than stock, these rear control arms feature inner monoball bushings and are built of steel, reducing the weight as well. These are perfect for a lowered car or for a track car that needs a greater level of rear adjustment.

Features:

  • Strong Steel Construction
  • Adjustable
  • Painted Yellow For Corrosion Protection
  • Weight Reduction
  • Monoball Inner Mount

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

SPL Parts - Corporate Logo
T#:553657
Part#: SPLTRE9X
In Stock
$ 629.00 USD
Free Shipping
$ 629.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.
Show More Show Less
SPL Parts - Corporate Logo
T#:553695
Part#: SPLRTAELF8X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

TRW - Corporate Logo
T#:395054
Part#: 31126855741
Ships in 2 Business Days
$ 133.99

This product was last offered at the strikethrough price on
03-06-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint
Delphi - Corporate Logo
T#:597001
Part#: 31122284529
In Stock
$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping
This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less

SPL Parts - Corporate Logo
T#:553775
Part#: SPLFLCAF8X
Ships in 4 Business Days
$ 719.00 USD
Free Shipping
$ 719.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

TRW M3/1M Front Control Arm Upgrade Kit - with Level Sensor Rod - BMW...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
TRW - Corporate Logo
T#:557629
Part#: 31102283577MKT1
Ships in 6 Business Days
$ 430.04

This product was last offered at the strikethrough price on
04-28-2026

$ 401.28 USD
Free Shipping
$ 401.28 USD
Free Shipping
The M3 control arm upgrade is for people who want a very serious change in the ride/handling of the car. These are the factory OEM E9X M3 upper control arms, so the ride will not be much different than a standard M3. But it is a very large jump compared to the stock E9X arms and bushings, since they are not fluid-filled and have a harder rubber compound than the stock or Meyle HD bushings. These are direct replacements for the original arms, do not require any modification to install, and will add about .75 degrees of negative camber to the front for improved handling and tire wear
Show More Show Less
TRW - Corporate Logo
T#:348950
Part#: 33322283547
Ships in 3 Business Days
$ 175.99

This product was last offered at the strikethrough price on
03-17-2026

$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe
TRW - Corporate Logo
T#:341238
Part#: 33322283548
In Stock
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Connects the spindle assembly to the rear subframe


Delphi - Corporate Logo
T#:597000
Part#: 31122284530
In Stock
$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping
This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
Genuine BMW - Corporate Logo
T#:213879
Part#: 33306852895
In Stock
14% off MSRP $ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.99 USD
Free Shipping
14% off MSRP
$ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.99 USD
Free Shipping
This bushing connects the rear control arm to the rear trailing arm.
TRW - Corporate Logo
T#:395053
Part#: 31126855742
In Stock
$ 127.99

This product was last offered at the strikethrough price on
03-10-2026

$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping
Thrust arm with ball joint

SPL Parts - Corporate Logo
T#:553663
Part#: SPLRUAF8X
In Stock
$ 809.00 USD
Free Shipping
$ 809.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

Genuine BMW - Corporate Logo
T#:360811
Part#: 31129069035
In Stock
5% off MSRP $ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD
Free Shipping
5% off MSRP
$ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD
Free Shipping
SPL Parts - Corporate Logo
T#:553689
Part#: SPLRTRF8X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

Genuine BMW - Corporate Logo
T#:198734
Part#: 31122284529
Ships in 3 Business Days
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is a an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
Genuine BMW - Corporate Logo
T#:54039
Part#: 31107836863
In Stock
2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
2% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
OEM front control arm bushing (FCAB) as used on the E85/E86 Z4M.

The front control arm bushings are a key piece of the suspension. They are constantly in motion and take abuse from impacts, potholes, rough roads, and general cornering/wheel motions. To give a quiet and smooth ride, the bushings are made of compliant rubber. But the rubber can only withstand so much abuse before they become loose and spongy. This results in vibrations and possibly a shimmy when driving. A visual inspection will usually confirm that there is too much flex in the rubber or the rubber has cracked and torn. And if you're installing new control arms, always install new bushings to avoid duplicating labor costs.

These bushings come pre-pressed into their aluminum brackets. No need to press out old and press in new bushings! Just a simple swap! Sold Individually.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:19950
Part#: 31107836862
In Stock
2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
2% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
OEM front control arm bushing (FCAB) as used on the E85/E86 Z4M.

The front control arm bushings are a key piece of the suspension. They are constantly in motion and take abuse from impacts, potholes, rough roads, and general cornering/wheel motions. To give a quiet and smooth ride, the bushings are made of compliant rubber. But the rubber can only withstand so much abuse before they become loose and spongy. This results in vibrations and possibly a shimmy when driving. A visual inspection will usually confirm that there is too much flex in the rubber or the rubber has cracked and torn. And if you're installing new control arms, always install new bushings to avoid duplicating labor costs.

These bushings come pre-pressed into their aluminum brackets. No need to press out old and press in new bushings! Just a simple swap! Sold Individually.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

SPL Parts - Corporate Logo
T#:587650
Part#: SPL-TR-F3X
Ships in 2 Business Days
$ 629.00 USD
Free Shipping
$ 629.00 USD
Free Shipping
SPL parts are engineered for maximum performance. Billet Aluminum alloy 2024 hex rods are precision CNC machined and gun-drilled to reduce unsprung weight while maintaining high strength and stiffness. Exclusive 360-degree Rotating Clamp design allows for easy access to quickly and precisely locking in your desired alignment settings.
Show More Show Less
SPL Parts - Corporate Logo
T#:587647
Part#: SPL-RUA-F3X
Ships in 4 Business Days
$ 809.00 USD
Free Shipping
$ 809.00 USD
Free Shipping
SPL Parts TITANIUM Series Rear Upper Arms greatly increase the range of rear camber adjustment for high-performance track/street applications and are a must for lowered cars to meet alignment requirements.
Show More Show Less
Genuine BMW - Corporate Logo
T#:60156
Part#: 33321090452
Ships in 3 Business Days
2% off MSRP $ 181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD
Free Shipping
2% off MSRP
$ 181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD
Free Shipping

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW RUBBER MOUNTING

Show More Show Less


Genuine BMW - Corporate Logo
T#:7712
Part#: 31129061222
In Stock
6% off MSRP $ 98.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD
Free Shipping
6% off MSRP
$ 98.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD
Free Shipping


Genuine BMW Set Rubber Mounting Eccentric
This item fits the following BMW Chassis:
E30 M3,E30

TRW - Corporate Logo
T#:341241
Part#: 33322283547KT4
Ships in 3 Business Days
$ 600.99

This product was last offered at the strikethrough price on
03-13-2026

$ 477.99 USD
Free Shipping
$ 477.99 USD
Free Shipping
These M3 rear guide rod arms are an upgrade for the non-M cars. The stock non-M arms are made from sheetmetal spot welded together at the ends. The arm tends to flex and bend under even moderate cornering loads. Factor in gripper tires and more torque and this arm is inadequate for stability and consistent handling. The M3 arms are one piece of aluminum offering greater strength and with a sealed monoball inner bushing that allows the arm to rotate (instead of twisting). 
 
Show More Show Less
SPL Parts - Corporate Logo
T#:553727
Part#: SPLRTAELE9X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping

These SPL Parts Adjustable Rear toe arms replace OEM Part number 33322406290

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined. In addition, this kit includes Eccentric lockout components. This guarantees that your toe alignment won't slip under aggressive driving due to an eccentric bolt.

Technical Specifications:

  • Gundrilled 2024 Aluminum Links to reduce unsprung weight
  • 6061 Aluminum Clamps and Heim Joint Spacers
  • Titanium Socket Head Cap Screws
  • Rotating clamp design allows for easy access to lock down your alignment settings
  • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
  • 6061 Aluminum Eccentric Lockout Washers
  • Grade 10.9 Hex Cap Bolts with Lock Nuts
  • Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Non-M
2008-2013 E8X BMW 128i 135i

Show More Show Less

Genuine BMW - Corporate Logo
T#:60223
Part#: 33321133864
In Stock
7% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD
Limited Qty Sale
Free Shipping
7% off MSRP
$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD
Limited Qty Sale
Free Shipping
Genuine BMW RUBBER MOUNTING

Genuine BMW - Corporate Logo
T#:198735
Part#: 31122284530
Ships in 3 Business Days
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is a an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
SPL Parts - Corporate Logo
T#:4538254
Part#: SPLRUAE9X
Ships in 2 Business Days
$ 809.00 USD
Free Shipping
$ 809.00 USD
Free Shipping
Get your rear camber back in spec to prevent premature tire wear and add grip.

SPL Parts - Corporate Logo
T#:553804
Part#: SPLELE9X
Ships in 2 Business Days
$ 89.00 USD
Free Shipping
$ 89.00 USD
Free Shipping

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Factory BMW eccentric bolts only allow for small toe adjustments and often slip under hard cornering, effectively changing your alignment. SPL eccentric lockout kits eliminate stock eccentric bolts - you must have adjustable rear toe arms to utilize this kit in your setup; 

Technical Specifications:

  • CNC machined from 6061 aluminum
  • CAD plated grade 10.9 hardware
  • Include washers and bolts for both sides of your vehicle.
  • Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Sub-Models
2008-2013 E82 BMW All Submodels

Show More Show Less
Genuine BMW - Corporate Logo
T#:198737
Part#: 31122284532
In Stock
22% off MSRP $ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD
Free Shipping
22% off MSRP
$ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD
Free Shipping
Genuine BMW Right Tension Strut With Rubber Mounting

TRW - Corporate Logo
T#:395055
Part#: 31126855742KT
Ships in 2 Business Days
$ 260.99

This product was last offered at the strikethrough price on
03-06-2026

$ 247.99 USD
Free Shipping
$ 247.99 USD
Free Shipping
The thrust arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement.

TRW - Corporate Logo
T#:377447
Part#: 31102283577KT1
Ships in 6 Business Days
$ 423.99

This product was last offered at the strikethrough price on
04-28-2026

$ 382.99 USD
Free Shipping
$ 382.99 USD
Free Shipping
Over the years, the road takes a serious toll on your suspension. Potholes, speed bumps, and road hazards all contribute to a sloppy, weak suspension. To give a better feel to your driving experience and improve safety and ride comfort, replace suspension components as they wear. After years of service, non-serviceable ball joints and other components begin to wear out. Because some components cannot be replaced, the only solution is the replacement of the entire arm. This OEM TRW kit includes all four front control arms for the E9X M3 / E82 1M. Replacing all four at once will provide the most service life out of replacement parts and ensure they are all performing properly. This kit is intended for installation on Halogen headlight-equipped models, as a headlight level sensor rod is not included.
Show More Show Less
SPL Parts - Corporate Logo
T#:587645
Part#: SPL-RTAEL-F3X
Ships in 2 Business Days
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
SPL Parts Rear Toe Arms for the BMW F2X/F3X increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustments allows you to maximize grip on a track car and extend tire life on a streetcar.
Show More Show Less
SPL Parts - Corporate Logo
T#:587632
Part#: SPL-RTR-G29
Ships in 2 Business Days
$ 404.00 USD
Free Shipping
$ 404.00 USD
Free Shipping
The Rear Traction Links feature gun-drilled 2024 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment.
Show More Show Less


SPL Parts - Corporate Logo
T#:587646
Part#: SPL-RTR-F3X
Ships in 2 Business Days
$ 404.00 USD
Free Shipping
$ 404.00 USD
Free Shipping
SPL Parts TITANIUM Series Rear Traction Links (RTR) increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches.
Genuine BMW - Corporate Logo
T#:360873
Part#: 33326767748
Ships in 3 Business Days
7% off MSRP $ 131.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 122.99 USD
Free Shipping
7% off MSRP
$ 131.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 122.99 USD
Free Shipping
Genuine BMW - Corporate Logo
T#:1480
Part#: 31122341297
Ships in 3 Business Days
5% off MSRP $ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 310.99 USD
Free Shipping
5% off MSRP
$ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 310.99 USD
Free Shipping
Genuine BMW
This is the factory BMW control arm upgrade used on the high-performance 330i ZHP Performance Package and offered by BMW as a sport retrofit. These arms are identical dimensions as the regular arms so they are a direct replacement. But they have all metal ball joints instead of plastic or rubber. This means they last a lot longer and are much stronger. We used these in our Grand Am and World Challenge E46 racecars with excellent performance.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

We also recommend replacing the bushings when changing the control arms. The bushings are mounted at the back of the control arm and located the arm to the frame rail on the car. The stock bushings are rubber and will wear out sooner than the control arms themselves. With the control arm off the car now is the perfect time to also replace the bushings. Alternate part number 31122282121.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:54253
Part#: 31126798107
In Stock
15% off MSRP $ 484.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 428.99 USD
Limited Qty Sale
Free Shipping
15% off MSRP
$ 484.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 428.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Wishbone, Bottom, With Rubber Mount Left -
This item fits the following BMW Chassis:
F01,F02


SPL Parts - Corporate Logo
T#:553732
Part#: SPLRLLE36
Ships in 2 Business Days
$ 404.00 USD
Free Shipping
$ 404.00 USD
Free Shipping

These SPL parts adjustable rear camber arms replace OEM part number 33326770813

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using 6061-T6 aluminum tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

These rear camber arms allow for significantly greater camber adjustment over stock, a major benefit to lowered cars that need their camber readjusted to prevent tire wear and poor handling. These camber arms also provide increased stability and predictability versus the stock camber arms with rubber bushings.

Technical Specifications:

  • Lightweight Aluminum, Titanium, and Chromoly construction
  • Anodized Black for corrosion protection and durable finish
  • Gundrilled center hex links for maximum weight savings
  • Teflon lined FK Rod Ends
  • Made in the USA

Fits the following BMWs:
1992-1999 E36 BMW All Submodels
1999-2006 E46 BMW RWD Models

Show More Show Less
SPL Parts - Corporate Logo
T#:553781
Part#: SPLFLCAE9X
Ships in 2 Business Days
$ 719.00 USD
Free Shipping
$ 719.00 USD
Free Shipping

These SPL Parts Front Lower Street Control arms replace OEM Part numbers 31122405860 and 31122405859

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

These SPL front lower control arms open up a wide range of adjustment for roll center, camber, and track width adjustment and allow for full articulation with the correct ball joint angle. Instead of using traditional jam nuts, the main arm is slotted to allow the use of pinch bolts and SPL rotating clamps on their exclusive adjuster, making it easier to lock in track width and camber specifications.

*includes headlight adjusting rod

SPL Parts Billet Lower Control/Trailing Arms Feature:

  • Lightweight Aluminum and Titanium construction
  • Electroless nickel plated 4130 Chromoly Double Adjuster for quick adjustment
  • Correct ball joint angle for full articulation
  • Rotating Clamp design allows for easy access to lock down alignment settings
  • Low friction 3 piece Teflon lined FK sphericals and Heim joints/rod ends
  • Multiple size Stainless Steel roll center spacers for precise adjustment

Fits the following BMWs:
2006-2013 E9X BMW RWD Submodels
2008-2013 E82/88 BMW All  Submodels

Show More Show Less

SPL Parts - Corporate Logo
T#:587642
Part#: SPL-FLCA-F3X
Ships in 2 Business Days
$ 719.00 USD
Free Shipping
$ 719.00 USD
Free Shipping
SPL Parts Front Lower Control Arms provide roll center, camber, and track width adjustment for the BMW F2X/F3X, and allow for full articulation with the proper ball joint angle.
SPL Parts - Corporate Logo
T#:553694
Part#: SPLRTAF8X
Ships in 2 Business Days
$ 404.00 USD
Free Shipping
$ 404.00 USD
Free Shipping
When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined.
Show More Show Less

SPL Parts - Corporate Logo
T#:553728
Part#: SPLRTAELE9M
Ships in 2 Business Days
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping

These SPL Parts rear adjustable toe arms replace OEM Part number 33322283549

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined. In addition, this kit includes Eccentric lockout components. This guarantees that your toe alignment won't slip under aggressive driving due to an eccentric bolt.

Technical Specifications:

  • Gundrilled 2024 Aluminum Links to reduce unsprung weight
  • 6061 Aluminum Clamps and Heim Joint Spacers
  • Titanium Socket Head Cap Screws
  • Rotating clamp design allows for easy access to lock down your alignment settings
  • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
  • 6061 Aluminum Eccentric Lockout Washers
  • Grade 10.9 Hex Cap Bolts with Lock Nuts
  • Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW M3
2008-2013 E8X BMW 1 M

Show More Show Less

Genuine BMW - Corporate Logo
T#:191213
Part#: 31126851693
Ships in 3 Business Days
9% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping
9% off MSRP
$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.99 USD
Free Shipping


Genuine BMW Rubber Mounting -
This item fits the following BMW Chassis:
F15,F16

Genuine BMW - Corporate Logo
T#:5077
Part#: 31102283579
Ships in 3 Business Days
9% off MSRP $ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
9% off MSRP
$ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
These are the stock replacement front control arm bushings (FCAB) for the E82 1M and E9X M3 models. These solid rubber bushings replace the inner bushing on the front upper control arm, also known as the thrust arm or tension stut (it's the arm with the outer ball joint pointing down). These are the OEM bushings with a metal sleeve insert for precise but comfortable steering feel and response. A direct replacement for the E90/E92/E93 M3 and E82 1M. Professional installation recommended since these bushings need to be 'compressed' while they are being pressed in.

This can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The solid rubber of the M3 is a better and longer-lasting bushing than the fluid-filled stock E90 bushing. These M3 bushings are a bit stiffer than the original design so the steering and handling will be sharper while maintaining M3-levels of ride comfort.

Sold per bushing (order 2 for both sides).

This item is a direct fit for the following BMWs:
2008-2012 E82 BMW 1M
2008-2012 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
This item is an upgrade for the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Show More Show Less
Genuine BMW - Corporate Logo
T#:60428
Part#: 33326792525
Ships in 3 Business Days
9% off MSRP $ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping
9% off MSRP
$ 97.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 88.99 USD
Free Shipping


Genuine BMW Trailing Arm With Rubber Bushing -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36