These upper A-arms are an adjustable version of the stock upper control arms. They feature an adjustable outer ball joint that changes the camber spec. These are great for dialing in up to half a degree of camber quickly and easily. An alignment pin conveniently sets it in the stock location. The inner bushing is a heavier-duty version of the stock rubber design. The stiffer rubber means less flex and deflection which helps in steering response and handling. Adjusting camber can help with handling and steering response. Adding negative camber is useful in spirited driving on secondary roads and even on/off ramps and can help with tire-fender clearance. This is a direct replacement for the original arm.

Replaces factory BMW part numbers 31126775967, 31126779871, and 31126779908.

Price is each

Adds 0.50 degrees of negative camber to mitigate inner tire wear and improve handling

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive
2012+ F06 BMW 640i Gran Coupe 650i Gran Coupe
2012+ F12 F13 BMW 640i 650i
2009+ F01 F02 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2014+ I12 BMW i8

The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering. 

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel. 

This control arm comes with the Meyle HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. 

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty. 

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
2007-2013 E82/88 BMW All submodels
2006-2009 E9X BMW Non-M

Revamp your Mini's front-end suspension system with this comprehensive kit, meticulously crafted to renew ball joints and control arms. Outfitted with long-lasting Meyle HD lower control arm bushings, this kit guarantees a prolonged lifespan, surpassing that of standard OEM parts. Included in this set are front control arms, front left and right middle pivot bushings, front left and right end pivot bushings, front left and right control arm bushings, along with all the necessary hardware.

Key Benefits:

• Revitalizes front-end suspension
• Meyle HD lower control arm bushings ensure extended durability
• Comprehensive set includes essential components and hardware

The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering.

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel.

This is a package of Meyle HD control arms with the HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. The BMW part numbers for these arms are 31 12 1 141 717 and 31 12 1 141 718.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty.

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 525i, 525iT, 528i, 528iT, 530i sedans and touring wagons
2000-2003 E52 Z8 Z8 - Z8 Alpina

The front control arm bushings is the Achilles heel on the E39 models. The original factory bushings are fluid filled and rely on the fluid to absorb vibration and resist deflection. When the fluid is gone the rubber left over cannot match the original bushing's strength. The left over rubber is not stiff enough to resist the movements from the suspension. The result is a lot of vibration and reduced feedback and response from the steering. 

Meyle has addressed this issue with bushings that are not fluid-filled. The bushing is made of solid rubber that will last longer than the original bushing and is a bit stiffer than new originals for better response and feel. The lack of play from the solid rubber design will mean sharper steering, restoring much of the car's precision and 'connected' feel. 

This control arm comes with the Meyle HD bushings already pressed in. This makes for an easy swap out-swap in install. These arms replace the existing stock upper control arms - otherwise known as a tension strut or strut support arm. It's the arm with the twist. 

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. All Meyle HD parts come with a 4-year, unlimited mileage warranty. 

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 540i, 540i Wagon, M5

Add negative camber to the front wheels of your BMW to increase the stock handling limitations and reduce the issues with outer tire wear during hard cornering. The increased camber adjustment allows for more responsive turn-ins and can slightly reduce the tire wear on the outer edge of the tire.

Benefits:

• Replaces front upper control arms with ones that increase negative camber up to -0.5 degrees
• Improves grip of front tires
• Evens out tire wear during aggressive cornering

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 1 point towards your Dinan badge.

Fits the Following BMW's:

2011+ F13 BMW 640i 640iX 650i 650iX 650iX 4.0 650iX 4.4
2012+ F12 BMW 640i 640iX 650i 650iX 650iX 4.0 650iX 4.4
2011 - 2016 F11 BMW 520i 523i 528i 528iX 530dX 530i 535i 535iX 550I
2010 - 2016 F10 BMW 520i 523i 528i 528iX 530i 535i 535iX 550i 550iX Hybrid 5 M5
2009 - 2016 F07 BMW 528i 535i 535iX 550i 550iX 550iX 4.0 550iX 4.4
2013+ F06 BMW 640i 640i xDrive 650i 650i xDrive ALPINA B6X
2010 - 2015 F04 BMW Active Hybrid 7 Active Hybrid 7L
2010 - 2015 F03 BMW 7 Series Sedan F01/F02 Protection versions 750LiS 760LiS
2011 - 2015 F02 BMW Long Wheelbase 740Ld xDrive 740i 740Li xDrive 750Li 750Li xDrive 760Li Active Hybrid 7
2008 - 2010 F02 BMW Long Wheelbase 740Li 750Li 750Li xDrive 760Li ALPINA B7L ALPINA B7LX
2011 - 2015 F01 BMW 740i 750i 750i xDrive
2008 - 2010 F01 BMW 740i 750i 750i xDrive ALPINA B7 ALPINA B7X

Meyle HD Lower Control Arm Bushing for Mini

Experience improved handling and responsiveness with the Meyle HD Lower Control Arm Bushing for your Mini's front suspension. If you're noticing excessive play or slow response from your suspension, it's likely due to worn-out lower control arm bushings. These bushings absorb road vibrations as your suspension moves, ensuring a smoother ride and reduced tire wear. With included bushings, installation is simplified, offering a tighter, more responsive suspension.

Benefits:

• Enhanced handling and responsiveness
• Reduces tire wear by absorbing road vibrations
• Simplified installation with included bushings
• Meyle HD parts offer durability and superior design compared to OEM parts

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

*Vehicles built before 12/2006 will also require the up dated ball joint part number 31103438623, as the control arm end where the ball joint passes through is now thicker and original ball joints are too short.

Fits the following BMWs:
12/2006-2010 E83 BMW X3