Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Fall Line - Corporate Logo
T#:27938407
Part#: FLM-G8X-1FECOTOE
In Stock
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

  • Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
  • Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
  • Simplified Setup: Eases camber adjustment and simplifies alignment processes.
  • Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
  • Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

  • G80 / G81 / G82 / G83 M3 & M4
  • F80 / F82 M3 & M4
  • G87 M2
  • F87 M2
Show More Show Less
Revshift - Corporate Logo
T#:1105927
Part#: BTA-E9X
Ships in 3 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
These billet aluminum rear trailing arms fit the BMW E9x and E8x including the M models. They are CNC machined from 6061-T6 aluminum and are protected by a black anodized hardcoat. These trailing arms replace the flimsy stamped oem part, stiffen the rear suspension, and improve the vehicle's handling. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Sidem - Corporate Logo
T#:41661231
Part#: 31108866774
In Stock
$ 224.99

This product was last offered at the strikethrough price on
05-07-2026

$ 204.99 USD
Free Shipping on orders $49 and up
$ 204.99 USD
Free Shipping on orders $49 and up
Also known as a thrust arm or tension strut, this front lower control arm features a fluid-filled bushing that dampens vibrations, giving your BMW smooth handling. If this bushing has split or cracked and leaked, a replacement control arm is your best option. This replacement control arm includes a new bushing and ball joint, ensuring your BMW's handling is restored to factory handling and feel.
Show More Show Less

Fall Line - Corporate Logo
T#:20979735
Part#: F8X/E9X-1FLCOCA
Ships on Sep 4, 2026
$ 995.00 USD
Free Shipping
$ 995.00 USD
Free Shipping
*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:578349
Part#: ADJRTAB
Ships in 3 Business Days
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
Designed specifically for those of you who prefer not to weld in toe and camber adjustment plates. If you have a lowered or track prepped BMW then you need this adjustable bushing kit. Condor's bushings feature in-car adjustability for camber and toe of up to +/- 1 degree. Their simple design allows for easy and accurate adjustment using the included stainless steel spanner wrench. Once adjusted, trailing arm bolts lock down the CNC machined center cores firmly in place. Condor's UHMW bushings and hard-coat anodized aluminum center cores will stiffen the rear trailing arms while giving you the benefit of adjustable suspension geometry.
Show More Show Less
Sidem - Corporate Logo
T#:47439421
Part#: 31102283577
In Stock
$ 89.99 USD
Free Shipping on orders $49 and up
Replacement control arm for the E9X M3 and E82 1 M Coupe, often used as upgrades for Non-M models!

Sidem - Corporate Logo
T#:47439423
Part#: 31102283575
In Stock
$ 87.99 USD
Free Shipping on orders $49 and up
This is the front upper left control arm with the outer ball joint pointing down. This replacement fits E82 1M Coupe and E90/E92/E93 M3 models. This control arm includes the inner, pressed-in bushing and outer ball joint. This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.
Show More Show Less
Sidem - Corporate Logo
T#:47439422
Part#: 31102283578
In Stock
$ 89.99 USD
Free Shipping on orders $49 and up
Replacement control arm for the E9X M3 and E82 1 M Coupe, often used as upgrades for Non-M models!

Sidem - Corporate Logo
T#:47439424
Part#: 31102283576
In Stock
$ 87.99 USD
Free Shipping on orders $49 and up
This is the front upper right control arm with the outer ball joint pointing down. This replacement fits E82 1M Coupe and E90/E92/E93 M3 models. This control arm includes the inner, pressed-in bushing and outer ball joint. This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:40917450
Part#: RTAMB-E36-E46
In Stock at Vendor
$ 265.00 USD
Free Shipping on orders $49 and up
Condor Speed Shop collaborated with Syncro Design Works to create these new Monoball Rear Trailing Arm Bushings designed for the track! While also at home on the street, these performance bushings are designed to handle the stresses of the track, offering a full range of articulation for optimal suspension geometry and a sealed design for maintenance-free operation and a long life. SDW's' own 410hp shop track/streetcar still has the original prototype bearing installed in 2009, with no measurable toe deflection. Condor RTAMBs are precision CNC machined and hard coat anodized to protect against corrosion, moisture, and salt spray. They come fully assembled and ready to install. NOTE: Professional installation recommended. These bushings must be pressed into the factory Rear Trailing Arms.
Show More Show Less
Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Sidem - Corporate Logo
T#:41661230
Part#: 31108866773
Back Ordered
$ 224.99

This product was last offered at the strikethrough price on
05-07-2026

$ 218.99 USD
Free Shipping on orders $49 and up
$ 218.99 USD
Free Shipping on orders $49 and up
Also known as a thrust arm or tension strut, this front lower control arm features a fluid-filled bushing that dampens vibrations, giving your BMW smooth handling. If this bushing has split or cracked and leaked, a replacement control arm is your best option. This replacement control arm includes a new bushing and ball joint, ensuring your BMW's handling is restored to factory handling and feel.
Show More Show Less


Fall Line - Corporate Logo
T#:28038203
Part#: FLM-E9X-1FRTAK
Back Ordered
$ 449.99 USD
Free Shipping
$ 449.99 USD
Free Shipping
Condor Speed Shop - Corporate Logo
T#:583280
Part#: S-CON-CAM-23
Ships on Sep 8, 2026
$ 184.99 USD
Free Shipping
$ 184.99 USD
Free Shipping

Swapping in E46 control arms into your E30 or E36 significantly increases negative camber by widening the track width and also gives you more clearance for more steering angle. Condor's CNC machined control arm brackets are made from solid steel and are fitted with a solid hex-shaped bushing. Designed for the street or the track, they hold the control arm steady and eliminate "shimmy" caused by stock bushings. They sharpen steering and improve overall driving feel. Comparable to the NLA Treehouse E36 & E30 Eyeball Arms.

Easiest install of any aftermarket solution
Allow clearance for E30 M50 Conversion exhaust
Street Approved, marginal increase in NVH
Easy Installation, no need for a press
CNC machined steel construction
Solid design without the maintenance of spherical bearings
Heavy-Duty replaceable UHMW insert. Don't be misinformed, UHMW is the best material for these inserts. Delrin is not self-lubricating and will crack and degrade over time.
Powder coated white for corrosion resistance
Improve caster with M3 offset geometry
Keep proper steering geometry under high loads
Made in the U.S.A.
Fitment:
E30 84-91 3 Series
E36 92-98 3 series & Z3

Note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36

Be sure to measure your control arms to determine if you need 21mm or 23mm. Meyle makes a standard e46 control arm and a Heavy Duty control arm. Most HD arms have a hex that is larger in size (23mm). Lifetime Warranty

Show More Show Less
Condor Speed Shop - Corporate Logo
T#:577566
Part#: RTAB36-OFFSET
In Stock at Vendor
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
Condor's Offset Rear Trailing Arm Bushings (RTABs) are perfect for the street and the track. They're designed to help correct rear toe-in and toe-out issues on lowered cars. To correct for toe-in: RTABs can be installed with the thick side inboard to help push the rear trailing arms towards the outsides of the car. To correct for toe-out when running minimal camber setup: RTABs can be installed with the thin sides inboard to help push the trailing arms inwards. The amount of total adjustment is purely dependent on how low your car is, but we've seen toe adjustment from 1/8” out on each side to 1/8” in on each side, which is a super nice range for the e36 rear end! They use UHMW in all of their suspension bushings because it is self-lubricating, meaning it requires no grease when installing, has almost zero deflection yet also absorbs some vibration. It will outlast other types of rubber or urethane bushings. They include black oxide plated steel plates for each RTAB to prevent lateral movement between the bushing material and the aluminum. Polyurethane and rubber bushings will deflect and slide, causing your rear alignment settings to change mid-corner. With these bushings, you won't have to worry about dynamic changes in your toe settings; the rear alignment stays in check during hard cornering, braking, and acceleration. This item fits the following BMWs: 1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe Kit includes a pair of trailing arm bushings
Show More Show Less

Fall Line - Corporate Logo
T#:28038216
Part#: FLM-E9X-1FECOTOE
In Stock at Vendor
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The standard toe link kit by Fall Line Motorsports is designed to simplify toe changes at an alignment facility while still keeping cost reasonable. The standard toe link kit keeps costs down by using a traditional jam nut design in a sturdy billet arm. Adjustable threaded rod ends turn into and out of the arm for a wide range of toe adjustment, and enable an alignment technician to easily set toe on a lowered car.
Show More Show Less

Fall Line - Corporate Logo
T#:5580972
Part#: FLM-E9X-1BLCABO
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less
Fall Line - Corporate Logo
T#:5580971
Part#: F8X-1BLCASB
Back Ordered
$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
Rubber bushings found in the latest M Cars' rear camber arms are the last weak link in an otherwise rigid suspension. Fall-Line's new lower control arm subframe cup bearings yield a significant improvement over the factory bushings; as motorsport parts, both strength and longevity were priorities—to do just that, Fall-Line boasts the largest FK spherical bearings on the market—by eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with the competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less

Fall Line - Corporate Logo
T#:5580939
Part#: FLM-F8XWUAK
In Stock
$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD
Limited Qty Sale
Free Shipping
$ 1,040.00

This product was last offered at the strikethrough price on
05-19-2026

$ 990.99 USD
Limited Qty Sale
Free Shipping
These upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine-tuning within the full-suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions.
Show More Show Less
Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Condor Speed Shop - Corporate Logo
T#:583278
Part#: CON-CAB-P
Ships in 2 Business Days
$ 195.99 USD
Free Shipping
$ 195.99 USD
Free Shipping

Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more clearance for more steering angle. Condor's conversion bushings are machined from UHMW due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change). They've designed them offset to re-center the wheel and give your e30/e36 the correct caster. They will include a stainless-steel insert that tightly presses over the hex pattern on the E46 control arms. You do not need to grind down your control arms or make any other modifications to your chassis. Please note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36.

Fitment:
Fits the following Meyle and Lemforder arms with 21-22MM Hex.

LEMFORDER ZHP - 31122282121 & 31122282122
LEMFORDER - 31126777851 & 31126777852
MEYLE HD - 31126777851 & 31126777852
*Please note that Meyle makes a standard e46 control arm and a Heavy Duty control arm. SOME HD arms have a hex that is larger in size. These HD control arms may need to be shaved 1-2 mm for proper fitment.

Show More Show Less

Fall Line - Corporate Logo
T#:27938408
Part#: FLM-G8X-1FRTAK
Ships in 3 Business Days
$ 679.99 USD
Free Shipping
$ 679.99 USD
Free Shipping
This item can function as the Rear Lower Tension Arm, as well as a Fixed Toe Arm. This SKU replaces OEM BMW Part number: 33322284534 Experience championship-level performance with Fall-Line Motorsports' precision-engineered suspension components. Crafted from aircraft-grade billet aluminum and finished with military-spec hard coat anodizing, these components are designed to elevate your driving experience to victory. Improved Handling and Durability Fall-Line's F8X / G8X lower tension arms and fixed toe arms are built to excel in motorsport conditions. Their CNC-machined, one-piece construction ensures both strength and longevity. Featuring the largest FK spherical bearings on the market, these arms eliminate rubber from critical areas, giving you ultimate control over your car's tire behavior and enhancing your confidence behind the wheel. Stainless steel spiral locks provide 360-degree clamping force for a secure fit under competition-level loads. Long-Lasting Performance Our spherical bearings outlast OEM rubber variants, sparing you the hassle of repeated replacements. While these suspension upgrades offer improved feedback and handling, they may result in a slight increase in noise, vibration, and harshness. Product Details: Compatible with all G8X and F8X M cars DMG Mori 5-Axis CNC machined 6061-T6 aluminum Full stainless bearing assembly (hats, bearing, housing, spiral locks) Sold in pairs; designed to replace rear trailing/tension arms (BMW Part Number: 33-32-2-284-534) MIL Spec hard coat clear anodizing Made in the USA Fixed toe arms retain factory Eccentric bolt adjustment
Show More Show Less
Fall Line - Corporate Logo
T#:28038190
Part#: FLM-F8X-1FWUAK
In Stock
$ 1,040.00 USD
Free Shipping
$ 1,040.00 USD
Free Shipping
From years of competitive race experience, Fall-Line has become synonymous with producing not only championship caliber race cars, but the finest suspension components that help propel them to victory. As the final piece within Fall-Line’s suite of rear suspension offerings for the F8X M2 / M3 / M4, these upper wishbones boast two major benefits: replace the OEM rubber bushings with spherical units and add valuable adjustability versus the standard, fixed arm. The new adjustment capabilities allow ultra fine tuning within the full suspension suite—the more consistent suspension geometry, amongst other benefits, results in significantly improved performance and confidence in all driving conditions. These arms are direct replacements for BMW Part No. 33322284777. The F8X cars will notice an immediate difference due to its unique subframe and chassis relationship—torsional rigidity is further improved with the addition of these arms with only marginal increases in NVH. As an added benefit, the spherical bearings will outlast the OEM rubber variants, saving the headache of repeated replacement over your ownership. Product Details: Fits all F8X M2 / M3 / M4 Motorsport clamp-style fastener for faster, more reliable alignment adjustments Long-life FK spherical bearings Made in USA Replaces OEM BMW Part Numbers: 33-32-2-284-777
Show More Show Less
Fall Line - Corporate Logo
T#:598880
Part#: FLM-F87-1BUNI
Ships in 1 Business Day
$ 423.00 USD
Free Shipping
$ 423.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M2. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M2 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M2’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M2.
Show More Show Less


Condor Speed Shop - Corporate Logo
T#:40782367
Part#: CONTROLBUSHOFF46
Ships in 2 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
$ 95.00 USD
Free Shipping on orders $49 and up
Polyurethan bushings with a offset insert for control arm.
Fall Line - Corporate Logo
T#:28038194
Part#: FLM-E9X-1BUNI
In Stock
$ 423.00 USD
Free Shipping
$ 423.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the front steering and suspension feel of the M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm. The bearing’s housing is precision machine from aluminum, to create a rigid part that allows for the M3’s thrust arm to move smoothly through its range of suspension travel. The improvement in steering and suspension feel is immediate and truly enhances the personality of the M3. *V2 improved design also incorporates hard coat clear anodized finish*
Show More Show Less
Fall Line - Corporate Logo
T#:5580954
Part#: FLM-E46-1BUNI
Ships in 3 Business Days
$ 408.00 USD
Free Shipping
$ 408.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the rear suspension feel of the E46 and E36 M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm.
Show More Show Less

Fall Line - Corporate Logo
T#:5580979
Part#: FLM-E9X-1BLTABO
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
By eliminating rubber from a critical feedback area of the car, you gain control over the tire’s behavior and thereby confidence behind the wheel at the limit. To adequately cope with competition-level load, Fall-Line bearings feature stainless steel spiral locks that offer 360 degrees of clamping force to secure the bearing from any potential movement.
Show More Show Less

Fall Line - Corporate Logo
T#:5580975
Part#: FLM-E9X-1BLTABI
Ships in 3 Business Days
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping

BMW E9X M3/E82 1M Inner Lower Tension Arm Bearing is engineered to elevate suspension performance with precision and durability. Developed by Fall-Line, known for their championship-level race cars and premium suspension components, this bearing is a significant upgrade over factory rubber bushings. Designed for motorsport applications, it incorporates FK spherical bearings for enhanced strength and longevity.

  • Superior Performance: Provides a notable improvement over OEM rubber bushings for enhanced control and feedback.
  • Durable Construction: Features the largest FK spherical bearings available, ensuring long-lasting reliability.
  • Enhanced Control: Eliminates rubber components to offer better control over tire behavior and increased driver confidence.
  • Robust Design: Equipped with stainless steel spiral locks for 360 degrees of clamping force to secure the bearing firmly.
  • Long-Lasting: Outperforms OEM rubber variants, reducing the need for frequent replacements.
  • Precision Engineering: CNC machined from high-quality materials in the USA for exact fit and superior performance.
Show More Show Less
Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Genuine BMW M Performance BMW Performance Lower Control Arm Kit ...
For RWD vehicles with sport suspension or performance package
Genuine BMW M Performance - Corporate Logo
T#:5182
Part#: 31120429578
Ships in 4 Business Days
10% off MSRP $ 602.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.99 USD
10% off MSRP
$ 602.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 539.99 USD
BMW Performance Control ...

Genuine BMW Motorsport - Corporate Logo
T#:2309
Part#: E9X-GPN-UCAB
Ships in 8 Business Days
$ 413.38 USD
Free Shipping
$ 413.38 USD
Free Shipping
These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
Show More Show Less

Fall Line - Corporate Logo
T#:28071501
Part#: FLM-E9X-1FRACTOE
Back Ordered
$ 650.00 USD
Free Shipping
$ 650.00 USD
Free Shipping
A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber. The race toe link kit by Fall Line Motorsports is designed to facilitate rapid adjustments of toe during an alignment, and combined with the tension strut will also enable adjustment of overall track. Not only does this allow for fine tuning of wheel fitment, these arms will allow an alignment shop to make quick work of car setup, even simplifying the camber adjustment process as a result. The race toe links utilize a unique clamp-style fastener system as seen in BMW’s own tie rods and Porsche Motorsport components, tightening the adjustment arm in place with no stretch of the hardware or change of alignment. Less expensive jam-nut designs limit precision and nearly guarantee an alignment change when the jam-nut is tightened. Laser cut lockout washers correctly eliminate the original BMW adjustment, eliminating any unwanted movement in the system.
Show More Show Less
Sidem M3/1M Front Control Arm Upgrade Kit - BMW E82/88 E9X Non-M ...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
Sidem - Corporate Logo
T#:53361579
Part#: 3110228357S1KT
In Stock
New Item
$ 355.99 USD
Free Shipping on orders $49 and up
Elevate your BMW's handling dynamics without sacrificing the refined ride quality you enjoy every day. This upgrade kit utilizes the front control arms originally engineered for the E90 M3 and E82 1M, providing a sophisticated enhancement to your suspension geometry and overall steering precision. While many aftermarket performance options rely on harsh polyurethane or noisy heim-joint bushings that trade comfort for track-focused rigidity, these M3 components offer the ideal middle ground for a spirited daily driver. Unlike the factory Non-M control arms that utilize fluid-filled bushings prone to cracking and leaking over time, these high-performance replacements feature solid rubber bushings. This design significantly reduces control arm deflection and sharpens front-end feedback, ensuring your vehicle feels more planted and responsive during cornering. Sidem has refined this setup even further by reinforcing key areas of the original factory design, resulting in a more durable and reliable component that stands up to the rigors of the road while maintaining a smooth, factory-plus feel.
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:579752
Part#: 51569
In Stock
Sale - Save 80% $ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD
Free Shipping on orders $49 and up
Sale - Save 80%
$ 59.99

This product was last offered at the strikethrough price on
05-03-2026

$ 12.24 USD
Free Shipping on orders $49 and up
Control arm with factory bushing for easy installation! If your control arm bushing is bad, it's worth buying this entire unit to save yourself time and money down the road.


Sidem M3/1M Front Control Arm Upgrade Kit w/ Installation Hardware - ...
Will add about .75 degrees of negative camber to the front for improved handling and tire wear
Sidem - Corporate Logo
T#:53396929
Part#: 3110228357S2KT
In Stock
New Item
$ 426.99

This product was last offered at the strikethrough price on
05-02-2026

$ 417.99 USD
Free Shipping on orders $49 and up
$ 417.99 USD
Free Shipping on orders $49 and up
Elevate your BMW's handling dynamics without sacrificing the refined ride quality you enjoy every day. This upgrade kit utilizes the front control arms originally engineered for the E90 M3 and E82 1M, providing a sophisticated enhancement to your suspension geometry and overall steering precision. While many aftermarket performance options rely on harsh polyurethane or noisy heim-joint bushings that trade comfort for track-focused rigidity, these M3 components offer the ideal middle ground for a spirited daily driver. Unlike the factory Non-M control arms that utilize fluid-filled bushings prone to cracking and leaking over time, these high-performance replacements feature solid rubber bushings. This design significantly reduces control arm deflection and sharpens front-end feedback, ensuring your vehicle feels more planted and responsive during cornering. Sidem has refined this setup even further by reinforcing key areas of the original factory design, resulting in a more durable and reliable component that stands up to the rigors of the road while maintaining a smooth, factory-plus feel.
Show More Show Less
Sidem - Corporate Logo
T#:2750687
Part#: 31126882843
Ships in 1-2 days
$ 90.99

This product was last offered at the strikethrough price on
05-07-2026

$ 88.99 USD
Free Shipping on orders $49 and up
$ 88.99 USD
Free Shipping on orders $49 and up
Genuine BMW Motorsport - Corporate Logo
T#:12075
Part#: E9X-GPN-TOE
Ships on Sep 17, 2026
$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping
These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 - two bushings for each toe arm.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:3093
Part#: E9X-GPN-FOLB
Ships on Sep 17, 2026
$ 519.80 USD
Free Shipping
$ 519.80 USD
Free Shipping
These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

Sold as a set of 4 -
2 Upper Link Outer Bushings,
2 Guide Rod Outer Bushings

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less

Genuine BMW Motorsport - Corporate Logo
T#:390410
Part#: F220033323R
Ships on Sep 17, 2026
$ 4,609.54 USD
$ 4,609.54 USD
Rubber has no place on a race car (except for tires, of course). Rubber suspension bushings are one of the first things to get swapped out for our race cars. The more solid the better when it comes to controlling the alignment and keeping your race setup consistent. We use as much solid material as the rules allow. With no deflection, solid bushings also give amazing feedback to the driver. For the M235iR, BMW had two specs for the rear control arms - stock stamped steel control arms with a rubber/neoprene bushing that is slightly stiffer than stock (2014-2015 spec) and these aluminum/stainless steel control arms with solid Heim-jointed ends (2016 spec). An additional benefit to the Heim joints is the arms are adjustable so the alignment can be perfectly dialed in. The front control arms use M3/M4 thrust arms and wishbones with sealed monoball joints. Full solid mounts and bushings will give you many setup options with razor sharp steering and chassis response. Note: 2016-spec rear control arms do not have a spring perch like the factory arms. These are for rear coil over shocks only.
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:338369
Part#: 33327749778
Ships on Sep 17, 2026
Starting at $ 198.94 USD
Free Shipping
Starting at $ 198.94 USD
Free Shipping
Designed and built in-house at BMW Motorsport, these are stock rear camber arms from the E36 M3 that have been strengthened by welding a reinforment in between the wishbones. Stiffer than the stock units and still adjustable for camber. This arm is legal in many racing classes where an aftermarket arm is not permitted. Sold individually, two required per car.

For maximum adjustment solid aluminum camber arms, you may also want to check out our TMS E36/E46 Adjustable Rear Camber Arms .

This arm does not include a bushing, but you may choose add a bushing using the drop down below. For an additional charge, you can get the bushing pre-pressed into the arm, so it is ready to install on the car (no added shop time or hydraulic press required).

Sold Individually.
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:579797
Part#: 52322
Special Order: No Guaranteed ETA
Sale - Save 20% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.59 USD
Free Shipping on orders $49 and up
Mounting bolts sold separately. Two required per ball joint.
Vaico - Corporate Logo
T#:41661234
Part#: 31106893550
Special Order: No Guaranteed ETA
$ 409.99 USD
Free Shipping on orders $49 and up
Also known as a thrust arm or tension strut, this front lower control arm features a fluid-filled bushing that dampens vibrations, giving your BMW smooth handling. If this bushing has split or cracked and leaked, a replacement control arm is your best option. This replacement control arm includes a new bushing and ball joint, ensuring your BMW's handling is restored to factory handling and feel.
Show More Show Less

Vaico - Corporate Logo
T#:41661233
Part#: 31106893549
Special Order: No Guaranteed ETA
$ 409.99 USD
Free Shipping on orders $49 and up
Also known as a thrust arm or tension strut, this front lower control arm features a fluid-filled bushing that dampens vibrations, giving your BMW smooth handling. If this bushing has split or cracked and leaked, a replacement control arm is your best option. This replacement control arm includes a new bushing and ball joint, ensuring your BMW's handling is restored to factory handling and feel.
Show More Show Less