Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:338358
Part#: 31312489795K
In Stock
Starting at $ 63.12 USD
Free Shipping on orders $49 and up
Starting at $ 63.12 USD
Free Shipping on orders $49 and up
The shock towers on the E36 and Z3 are notoriously weak. Under normal driving conditions with a stock, fresh suspension it is unlikely that you will ever have a problem. But with an upgraded street or race suspension with firm springs much of the energy from pounding the road is transmitted to the thin sheet metal in the strut tower. This pounding will cause the tower to deform or even crack. Look for 'mushrooming' or deformity around the holes for the three mounting studs at the top of the strut tower. The sheetmetal around the holes should really be flat and square. Poor shocks or stiff suspensions will actually cause this sheetmetal to pop up.

These factory BMW reinforcement plates will help disperse the energy and save you from costly repairs in the future. A strut brace also helps to prevent this but these plates are designed to reinforce the strut tower from the bottom. The install over your strut mount or camber plate and simply add thickness (strength) to the strut tower. They can be sandwiched in place and do not require welding. BMW part number 31312489795

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe. Note: some Z3 models already come from the factory with these plates.
Show More Show Less
Genuine BMW - Corporate Logo
T#:360872
Part#: 33321092247
In Stock
14% off MSRP $ 33.46

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.78 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 33.46

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.78 USD
Free Shipping on orders $49 and up
SPL Parts - Corporate Logo
T#:553657
Part#: SPLTRE9X
In Stock
$ 629.00 USD
Free Shipping
$ 629.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.
Show More Show Less

Fall Line - Corporate Logo
T#:27938407
Part#: FLM-G8X-1FECOTOE
In Stock
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping

G8X / F8X Adjustable Toe Arm Set | Fall-Line Motorsports - Standard by Turner Motorsport is crafted to enhance the alignment process for BMW enthusiasts. Made in the USA, this standard toe link kit facilitates rapid toe adjustments during alignment, and when combined with the tension strut, it also allows for precise track adjustments. Designed for easy fitment, these arms simplify wheel alignment and camber adjustment, making the setup process quicker and more efficient.

  • Enhanced Alignment: Enables fast and precise toe adjustments for improved wheel fitment.
  • Track Adjustment: Works in conjunction with the tension strut for overall track adjustments.
  • Simplified Setup: Eases camber adjustment and simplifies alignment processes.
  • Direct Replacement: Matches OEM part number 33322284534 // 33-32-2-284-534.
  • Multi-Link Suspension Compatibility: Handles dynamic changes in alignment settings effectively.

Fits:

  • G80 / G81 / G82 / G83 M3 & M4
  • F80 / F82 M3 & M4
  • G87 M2
  • F87 M2
Show More Show Less

SPL Parts - Corporate Logo
T#:26904956
Part#: SPLRLBIE9X
In Stock
$ 179.00 USD
Free Shipping on orders $49 and up

Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.

Key Advantages:

Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:

6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)

Show More Show Less
Genuine BMW - Corporate Logo
T#:1436
Part#: 33329061945
Ships in 4 Business Days
$ 63.99 USD
Free Shipping on orders $49 and up
These trailing arm bushings are the stock rubber centered bushing. Each side of the car takes one pair of bushings.

This item fits the following BMWs:
1970-1976 2002 BMW 1600 2002 2002tii
1977-1983 E21 BMW 320i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318ti
1976-1981 E12 BMW 528i
1986-1988 E28 BMW 528e
1976-9/1982 E24 BMW 630csi 633csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
Show More Show Less

SPL Parts - Corporate Logo
T#:553695
Part#: SPLRTAELF8X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less
Revshift - Corporate Logo
T#:1105927
Part#: BTA-E9X
Ships in 3 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
These billet aluminum rear trailing arms fit the BMW E9x and E8x including the M models. They are CNC machined from 6061-T6 aluminum and are protected by a black anodized hardcoat. These trailing arms replace the flimsy stamped oem part, stiffen the rear suspension, and improve the vehicle's handling. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Delphi - Corporate Logo
T#:597001
Part#: 31122284529
In Stock
$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping
This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less

SPL Parts - Corporate Logo
T#:553775
Part#: SPLFLCAF8X
Ships in 3 Business Days
$ 719.00 USD
Free Shipping
$ 719.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less
Genuine BMW - Corporate Logo
T#:213879
Part#: 33306852895
In Stock
14% off MSRP $ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.99 USD
Free Shipping
14% off MSRP
$ 90.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 77.99 USD
Free Shipping
This bushing connects the rear control arm to the rear trailing arm.
SPL Parts - Corporate Logo
T#:17804825
Part#: SPLRLCBE9X
In Stock
$ 152.00 USD
Free Shipping on orders $49 and up
These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87
Show More Show Less


SPL Parts - Corporate Logo
T#:825816
Part#: SPLRLLE46
In Stock
$ 404.00 USD
Free Shipping on orders $49 and up
These SPL parts adjustable rear camber arms replace OEM part number 33326770813 These rear camber arms allow for significantly greater camber adjustment over stock, a major benefit to lowered cars that need their camber readjusted to prevent tire wear and poor handling. These camber arms also provide increased stability and predictability versus the stock camber arms with rubber bushings. SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. These rear camber arms from SPL parts utilize gun drilled 6061-T6 Aluminum center links, clamps, and clevises, along with Blue Anodized Titanium socket head cap screws and a 360 degree rotating clamp system. This provides optimal strength, performance, durability, and adjustment simplicity. SPL's adjustment design makes it simple to lock in your alignment settings, requiring only a 3/16" allen key! Features custom 3 piece FK bearings and rod ends manufactured in Connecticut - these also utilize a teflon liner which promotes quiet operation, low friction, and smooth articulation while eliminating bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race. The liner is suited perfectly for track use, with operating temperatures ranging from -65 degrees Fahrenheit to 325 degrees. Technical Specifications: Lightweight Aluminum, Titanium, and Stainless steel construction Anodized Black for corrosion protection and durable finish Gundrilled center hex links for maximum weight savings Teflon lined FK Rod Ends Made in the USA Fits the following BMWs: 1999-2006 E46 BMW RWD Models
Show More Show Less
Genuine BMW - Corporate Logo
T#:375771
Part#: 31106763928KT
In Stock
$ 74.99

This product was last offered at the strikethrough price on
03-04-2026

$ 61.99 USD
Free Shipping on orders $49 and up
$ 61.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:21814
Part#: 33326764292
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up


Genuine BMW Eccentric Bolt - M12X1,5X125
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93


Delphi - Corporate Logo
T#:597000
Part#: 31122284530
In Stock
$ 193.99

This product was last offered at the strikethrough price on
05-07-2026

$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping
This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less

GODSPEED - Corporate Logo
T#:590480
Part#: AK-135
In Stock
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping

Maintaining optimal vehicle alignment is crucial, especially when dealing with challenging road or track conditions. To prevent excess tire wear and ensure precise vehicle handling, turn to the Godspeed Project Rear Toe Arms.

These rear toe arms offer stability at high speeds, thanks to their precise alignment capabilities. Unlike traditional rubber bushings that wear quickly, these arms feature solid spherical bushings for exceptional durability. Their heat-treated ball and hard chrome-plated alloy steel composition guarantee strength and longevity.

Not only do these rear toe arms provide cost-effective performance improvements, but they also offer extended adjustment ranges and versatility. Their solid design enhances road feel, giving you more control and confidence in your BMW's performance.

Please note that realignment is recommended after installation, and these rear toe arms are intended for "Track Use Only" due to the increased road noise and vibration caused by solid bushings.

Show More Show Less
Genuine BMW - Corporate Logo
T#:638165
Part#: 07146888626
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
Used to adjust front camber - One required per side

SPL Parts - Corporate Logo
T#:553663
Part#: SPLRUAF8X
In Stock
$ 809.00 USD
Free Shipping
$ 809.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less
SPL Parts - Corporate Logo
T#:553689
Part#: SPLRTRF8X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

Genuine BMW - Corporate Logo
T#:360811
Part#: 31129069035
In Stock
5% off MSRP $ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD
Free Shipping
5% off MSRP
$ 78.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD
Free Shipping

Genuine BMW - Corporate Logo
T#:198734
Part#: 31122284529
Ships in 1-2 days
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
This is the left front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is a an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less
Genuine BMW - Corporate Logo
T#:19950
Part#: 31107836862
In Stock
2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
2% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
OEM front control arm bushing (FCAB) as used on the E85/E86 Z4M.

The front control arm bushings are a key piece of the suspension. They are constantly in motion and take abuse from impacts, potholes, rough roads, and general cornering/wheel motions. To give a quiet and smooth ride, the bushings are made of compliant rubber. But the rubber can only withstand so much abuse before they become loose and spongy. This results in vibrations and possibly a shimmy when driving. A visual inspection will usually confirm that there is too much flex in the rubber or the rubber has cracked and torn. And if you're installing new control arms, always install new bushings to avoid duplicating labor costs.

These bushings come pre-pressed into their aluminum brackets. No need to press out old and press in new bushings! Just a simple swap! Sold Individually.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less


SPL Parts - Corporate Logo
T#:26271755
Part#: SPLFLCAG2X
Ships in 1 Business Day
$ 719.00 USD
Free Shipping on orders $49 and up
The SPL BMW G2X Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the G2X BMWs (M340i, M440i, etc) while eliminating bushing deflection resulting in sharpened steering response and driving precision. The ability to run more negative camber and a slightly wider track width greatly improves the peak lateral grip available. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber. The lower control arms come with a ride height sensor bracket to maintain factory ride height sensor location, regardless of length of the arm to keep those finicky BMW chassis electronics happy. Suitable for all uses, from daily driver to race car. Benefits Adjustable Camber, Roll Center, and Track Width Eliminates Bushing Deflection Improved Tire Life with Ideal Camber Settings Lightweight, High-Strength Construction Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes US Made, PTFE Lined FK Rod Ends Materials 6061-T6 aluminum black anodized arm, clamps, and spacers 4130 CrMo electroless nickel plated double adjuster Ti6Al4V titanium socket head cap screws 304 stainless steel roll center and knuckle spacer 5/8" 4140 CrMo stud FK PTFE-lined spherical bearings (F1 spec, self-cleaning)
Show More Show Less
Genuine BMW - Corporate Logo
T#:54039
Part#: 31107836863
In Stock
2% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
2% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 133.99 USD
Free Shipping
OEM front control arm bushing (FCAB) as used on the E85/E86 Z4M.

The front control arm bushings are a key piece of the suspension. They are constantly in motion and take abuse from impacts, potholes, rough roads, and general cornering/wheel motions. To give a quiet and smooth ride, the bushings are made of compliant rubber. But the rubber can only withstand so much abuse before they become loose and spongy. This results in vibrations and possibly a shimmy when driving. A visual inspection will usually confirm that there is too much flex in the rubber or the rubber has cracked and torn. And if you're installing new control arms, always install new bushings to avoid duplicating labor costs.

These bushings come pre-pressed into their aluminum brackets. No need to press out old and press in new bushings! Just a simple swap! Sold Individually.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
GODSPEED - Corporate Logo
T#:22591963
Part#: AK-136
In Stock
$ 180.00 USD
Free Shipping on orders $49 and up

Don't let poor road or track conditions affect your vehicle's alignment, leading to excessive tire wear and compromised handling. Improve your suspension and achieve precise alignment with Godspeed Project's rear camber arms!

These camber arms enhance stability at high speeds, thanks to their precise alignment adjustments. The solid spherical bushings resist wear and outperform conventional rubber bushings. With heat-treated ball and hard chrome plated alloy steel construction, these camber arms offer exceptional strength and durability.

This cost-effective performance upgrade provides extended adjustment ranges, versatility, and improved road feel, thanks to their solid design. It's important to note that realignment is recommended after installation, and these camber arms are ideal for "Track Use Only" due to the increased road noise and vibration caused by solid bushings.

Show More Show Less

SPL Parts - Corporate Logo
T#:587647
Part#: SPL-RUA-F3X
Ships in 3 Business Days
$ 809.00 USD
Free Shipping
$ 809.00 USD
Free Shipping
SPL Parts TITANIUM Series Rear Upper Arms greatly increase the range of rear camber adjustment for high-performance track/street applications and are a must for lowered cars to meet alignment requirements.
Show More Show Less

SPL Parts - Corporate Logo
T#:587650
Part#: SPL-TR-F3X
Ships in 1 Business Day
$ 629.00 USD
Free Shipping
$ 629.00 USD
Free Shipping
SPL parts are engineered for maximum performance. Billet Aluminum alloy 2024 hex rods are precision CNC machined and gun-drilled to reduce unsprung weight while maintaining high strength and stiffness. Exclusive 360-degree Rotating Clamp design allows for easy access to quickly and precisely locking in your desired alignment settings.
Show More Show Less
Fall Line - Corporate Logo
T#:20979735
Part#: F8X/E9X-1FLCOCA
Ships on Sep 4, 2026
$ 995.00 USD
Free Shipping
$ 995.00 USD
Free Shipping
*NOTE: ONLY FOR CARS WITH TRUE REAR COIL OVER CONVERSION - NOT COMPATIBLE WITH STOCK REAR SPRINGS* Fall-Line Motorsports has taken everything they've learned in manufacturing over the last decade to create an ultra-high-end interpretation of the G8X / F8X M2 M3 M4 and E9X M3 lower camber arm. Fall-Line's bespoke version discards the deformation-prone stamped steel arm that includes a provision for the rear coil spring in favor of 5-axis CNC machined, billet aluminum that eliminates the rear coil mount. This pair has been gorgeously crafted and pocketed (to save weight without compromising rigidity) and is hard coat black anodized for ultimate resistance to wear. So too has the hardware been given an upgrade—10.9 grade corrosion-resistant extended bolts are included to replace the inferior factory pieces. These arms represent another exciting entry into the often neglected F8X / E9X suspension arm market and add valuable peace of mind for street or motorsport duty from the undisputed champion within the BMW realm. Product Details: For all G8X, F8X, and E9X M3 cars using TRUE Rear Coil Over Conversion ONLY DMG Mori 5-Axis CNC machined, billet aluminum construction Hard coat black anodized Includes Camber Shim Set Sold in pairs
Show More Show Less

Genuine BMW - Corporate Logo
T#:60156
Part#: 33321090452
Ships in 1-2 days
2% off MSRP $ 181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD
Free Shipping
2% off MSRP
$ 181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD
Free Shipping

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW RUBBER MOUNTING

Show More Show Less
Genuine BMW - Corporate Logo
T#:7706
Part#: 31121136607
Ships in 1-2 days
6% off MSRP $ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 65.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 61.99 USD
Free Shipping on orders $49 and up
GENUINE BMW FRONT AXLE RUBBER MOUNTING ROD 31121136607.--

This item fits the following BMWs:
BMW 7 Series - 740i, 740iL, 750iL
BMW 8 Series - 840i, 840ci, 850i, 850ci, 850csi

--.
Show More Show Less

Genuine BMW - Corporate Logo
T#:7712
Part#: 31129061222
In Stock
6% off MSRP $ 98.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD
Free Shipping
6% off MSRP
$ 98.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 92.99 USD
Free Shipping


Genuine BMW Set Rubber Mounting Eccentric
This item fits the following BMW Chassis:
E30 M3,E30


Genuine BMW - Corporate Logo
T#:7952
Part#: 33326760364
In Stock
6% off MSRP $ 24.15

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.71 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 24.15

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.71 USD
Free Shipping on orders $49 and up


Genuine BMW Lock Plate - Zns3
This item fits the following BMW Chassis:
E36 M3,E46 M3,E85 Z4M,E36,E46,E83 X3,E85 Z4,E86 Z4,E89 Z4,E93

Genuine BMW - Corporate Logo
T#:3655
Part#: 31129064875
Back Ordered
6% off MSRP $ 114.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 107.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 114.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 107.99 USD
Free Shipping on orders $49 and up
SEE T#338063
Genuine BMW - Corporate Logo
T#:60223
Part#: 33321133864
In Stock
7% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD
Limited Qty Sale
Free Shipping
7% off MSRP
$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD
Limited Qty Sale
Free Shipping
Genuine BMW RUBBER MOUNTING


Dinan - Corporate Logo
T#:598376
Part#: D280-0022
Back Ordered
Sale - Save 10% $ 425.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 383.36 USD
Free Shipping
Sale - Save 10%
$ 425.99

This product was last offered at the strikethrough price on
07-31-2026

$ 383.36 USD
Free Shipping
An underrated component of a proper driver's suspension the monoball kit (tension strut ball joint kit in today's terminology), is a remnant of an era when road feel was something desirable and sought after. Drivers wanted the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M-passioned BMW experience. The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. The quietest bearings on the market are virtually noise-free so you can live with them every day. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely. Features: Improved steering responsiveness. Reduces brake shimmy. Nylon-lined bearings for quiet operation. Machined aluminum housings. Sealed bearings.
Show More Show Less
SPL Parts - Corporate Logo
T#:553727
Part#: SPLRTAELE9X
In Stock
$ 449.00 USD
Free Shipping
$ 449.00 USD
Free Shipping

These SPL Parts Adjustable Rear toe arms replace OEM Part number 33322406290

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

When lowering your vehicle, toe alignment is thrown off. These SPL adjustable toe arms offer a wide range of toe adjustment and are a significant improvement over stock, eliminating suspension deflection and increasing handling response thanks to the FK Bushings rod ends that are Teflon lined. In addition, this kit includes Eccentric lockout components. This guarantees that your toe alignment won't slip under aggressive driving due to an eccentric bolt.

Technical Specifications:

  • Gundrilled 2024 Aluminum Links to reduce unsprung weight
  • 6061 Aluminum Clamps and Heim Joint Spacers
  • Titanium Socket Head Cap Screws
  • Rotating clamp design allows for easy access to lock down your alignment settings
  • Low friction 3 piece Teflon lined FK Heim joints/rod ends made in Connecticut
  • 6061 Aluminum Eccentric Lockout Washers
  • Grade 10.9 Hex Cap Bolts with Lock Nuts
  • Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Non-M
2008-2013 E8X BMW 128i 135i

Show More Show Less
GODSPEED - Corporate Logo
T#:638015
Part#: AK-047-A
In Stock
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping

Lowering a vehicle can often lead to the OEM suspension falling out of factory specifications, resulting in compromised handling and uneven tire wear. Godspeed offers the ideal solution with their range of adjustable arms and links designed to correct camber issues and restore your vehicle's performance.

Constructed from heavy-duty steel alloy, these components are built to withstand the test of time. To further ensure durability and protect against corrosion, Godspeed employs a meticulous three-stage powder coating process. These arms and links are engineered as direct replacements for factory components, making installation straightforward with the right tools. What sets them apart is the inclusion of spherical bearings, which provide a tighter feel and superior durability compared to the rubber bushings commonly found in competitors' offerings.

Key Features:

  • Heavy Duty Steel Alloy Construction: Ensures exceptional durability
  • Spherical Bearing for Exceptional Durability: Delivers a tighter feel and enhanced longevity
  • Three-Stage Powder Coating for Corrosion Protection: Guards against corrosion for long-lasting performance
  • Adjustable Length for Camber and Track Width: Provides flexibility to fine-tune your vehicle's setup
  • Enhances Handling and Eliminates Uneven Tire Wear: Restore your vehicle's performance and tire longevity
  • A Must-Have for Lowered Vehicles: Essential for optimizing suspension geometry after lowering
  • Allows Camber Correction for Improved Handling: Offers adjustment up to +/- 3 degrees

Upgrade your vehicle's suspension with Godspeed's Adjustable Arms and Links to experience improved handling and resolve camber issues with ease.

Show More Show Less

Genuine BMW - Corporate Logo
T#:368228
Part#: 33326771828
Ships in 1-2 days
13% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 48.99 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:348551
Part#: 33326770824
Ships in 1-2 days
14% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:360879
Part#: 33326770817
Ships in 1-2 days
1% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD
Free Shipping on orders $49 and up
1% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD
Free Shipping on orders $49 and up
This OE bushing is a standard replacement for M vehicles and an upgrade for Non-M vehicles. 

Genuine BMW - Corporate Logo
T#:21813
Part#: 33326763092
Ships in 1-2 days
14% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD
Free Shipping on orders $49 and up


Genuine BMW Rubber Mounting
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

Genuine BMW - Corporate Logo
T#:1480
Part#: 31122341297
Ships in 1-2 days
5% off MSRP $ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 310.99 USD
Free Shipping
5% off MSRP
$ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 310.99 USD
Free Shipping
Genuine BMW
This is the factory BMW control arm upgrade used on the high-performance 330i ZHP Performance Package and offered by BMW as a sport retrofit. These arms are identical dimensions as the regular arms so they are a direct replacement. But they have all metal ball joints instead of plastic or rubber. This means they last a lot longer and are much stronger. We used these in our Grand Am and World Challenge E46 racecars with excellent performance.

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

We also recommend replacing the bushings when changing the control arms. The bushings are mounted at the back of the control arm and located the arm to the frame rail on the car. The stock bushings are rubber and will wear out sooner than the control arms themselves. With the control arm off the car now is the perfect time to also replace the bushings. Alternate part number 31122282121.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less

Genuine BMW - Corporate Logo
T#:198735
Part#: 31122284530
Ships in 1-2 days
8% off MSRP $ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
8% off MSRP
$ 319.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 292.99 USD
Free Shipping
This is the right front lower control arm (also called a wishbone by BMW) for the F80 M3, F82 M4, and F83 M4. This can also be used as an upgrade on the F22 2-series and F3X 3/4-series. The M3/M4 control arm features a sealed inner and outer ball joints that are superior to elastometer rubber. The ball joints on the M3/M4 wishbone give a more precise feel and allow the control arm to move freely without resistance and with minimal deflection. When used on the F22/F30/F32 3/4-series they all 0.5 more degree of negative camber by pushing the bottom of the wheel out. And these are a little bit lighter than the stock F22/F3X control arms. This is a an ideal upgrade for track and autocross cars that need more negative front camber.
Show More Show Less

GODSPEED - Corporate Logo
T#:600123
Part#: AK-034
In Stock
$ 180.00 USD
Free Shipping
$ 180.00 USD
Free Shipping
These are a cheap, performance addition that give you greater adjustment ranges and versatility as well as more positive feedback of road feel thanks to their solid design.
Genuine BMW - Corporate Logo
T#:198737
Part#: 31122284532
In Stock
22% off MSRP $ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD
Free Shipping
22% off MSRP
$ 319.52

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.77 USD
Free Shipping
Genuine BMW Right Tension Strut With Rubber Mounting
SPL Parts - Corporate Logo
T#:4538254
Part#: SPLRUAE9X
Ships in 1 Business Day
$ 809.00 USD
Free Shipping
$ 809.00 USD
Free Shipping
Get your rear camber back in spec to prevent premature tire wear and add grip.