Find Parts That Fit Your Vehicle

BMW Control Arm Replacements & Upgrades

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Meyle Front Control Arm Bracket - E30 E36 Z3
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:178014
Part#: 31121136532MY
Ships on Sep 9, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Restore precise steering feel and eliminate unwanted noise. This Meyle bracket includes pre-pressed bushings for a straightforward installation, directly replacing worn components.
Meyle - Corporate Logo
T#:178013
Part#: 31121136531MY
Ships on Sep 9, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Restore precise front-end feel and handling with this Meyle HD Front Left Control Arm Bushing and Bracket assembly. Engineered for durability, it includes the bracket and mounting hardware for a straightforward, performance-oriented replacement.
Show More Show Less
Meyle Steel Front Control Arm - Right - E30
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:378631
Part#: 31121127726
In Stock
$ 93.99 USD
Free Shipping on orders $49 and up
$ 93.99 USD
Free Shipping on orders $49 and up
Includes ball joints

Meyle Rear Lower Control Arm - E36, E46, E83, Z4
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:369355
Part#: 33326770813
Ships on Sep 9, 2026
$ 44.99 USD
Free Shipping on orders $49 and up
Complete including bushing

Meyle - Corporate Logo
T#:362103
Part#: 33326767748
Ships on Sep 9, 2026
$ 243.99

This product was last offered at the strikethrough price on
08-17-2026

$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
Pressed into rear wheel carrier
Control Arm - Right
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36303273
Part#: 33326867538
In Stock
$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 83.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 83.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
The front control arm links the suspension to the vehicle's chassis, ensuring accurate wheel alignment, stability, and optimal handling. It facilitates smooth suspension movement while reducing vibrations, enhancing comfort and driving control.
Show More Show Less

Meyle Front Lower Control Arm - Left - BMW F22/23 F3X RWD
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36337185
Part#: 31126852991
In Stock
$ 92.99 USD
Free Shipping on orders $49 and up
Failed control arms often cause vibrations and shaking felt through the steering wheel, which may intensify with speed or braking. Additional symptoms include suspension noise, misaligned steering, and accelerated tire wear.
Show More Show Less
Verkline - Corporate Logo
T#:22525950
Part#: WAS-422
In Stock
Sale - Save 21% $ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD
Free Shipping on orders $49 and up
Verkline is excited to introduce their Rear Upper Adjustable Lateral Straight Links, the culmination of an extensive development and testing process. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, FEA (Finite Element Analysis) testing, and rigorous road trials. Now, enthusiasts have the opportunity to elevate their driving experience with these high-performance parts. Notable Advantages: Bump Steer and Anti-Squat Adjustability: Users can fine-tune their vehicle's bump steer and anti-squat characteristics for enhanced handling precision. Extended Camber Adjustment Range: These links provide a broader camber adjustment range, offering greater flexibility for alignment customization. Enhanced Strength and Rigidity: Verkline's design boasts increased strength and rigidity, resulting in an overall improvement in handling performance. Consistent Geometry: With no rubber components to flex, these links maintain consistent geometry during alignment adjustments, ensuring accuracy. Efficient Weight Design: Despite the additional functionality, these links maintain a weight profile similar to OEM components. Key Features: Bolt-In Kit: Installation is seamless, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying installation. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure durability and lightweight performance. Premium Motorsport Uniballs: These components feature high-quality motorsport uniballs for reliable and high-performance articulation. Uniball Rubber Boots: Protect against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything needed for installation is included, making setup efficient and straightforward. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. Included Components: Four T45 lightweight steel arms (two pairs) Thin locking nuts High-quality motorsport uniballs Spacer sleeves for assembling the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces the following part numbers: 33326878631 / 33326878632
Show More Show Less

Meyle Rear Track Strut - BMW F22/23 F3X
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:35998377
Part#: 33326792533
Ships in 2 Business Days
$ 74.99

This product was last offered at the strikethrough price on
03-20-2026

$ 52.99 USD
Free Shipping on orders $49 and up
$ 52.99 USD
Free Shipping on orders $49 and up
The rear track strut connects the spindle to the rear portion of the rear subframe.

Verkline - Corporate Logo
T#:22525951
Part#: WAS-423
Ships in 10 Business Days
$ 849.00 USD
Free Shipping on orders $49 and up
Verkline proudly introduces their Rear Upper Adjustable Lateral Bent Links, the result of a comprehensive development and testing program. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with these high-performance parts. Key Advantages: User-Friendly Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings, enabling precise alignment adjustments for improved handling. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these links maintain unaltered geometry during alignment adjustments, ensuring precision. Efficient Weight Design: Despite the added functionality, these links maintain a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications, ensuring a hassle-free setup. Pre-Assembled Wishbone: The wishbone comes pre-assembled with a predefined length, simplifying the installation process. CNC Machined Arm: Expertly crafted from 6082 T6 aluminum, these arms offer superior strength and durability. High-Quality Motorsport Uniballs and Spherical Bearings: These components feature top-tier uniballs and spherical bearings, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum wishbones (camber arms) Two pairs of CNC machined high-strength steel adjustment turnbuckles Thin locking nuts High-quality motorsport uniballs and spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33326881199
Show More Show Less
Verkline - Corporate Logo
T#:22525953
Part#: WAS-410
Ships in 10 Business Days
$ 1,199.00 USD
Free Shipping on orders $49 and up
Verkline is pleased to present the Front Adjustable Caster Arm, a product that has undergone extensive development and rigorous testing. This cutting-edge component is the result of a comprehensive process, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with this high-performance caster arm. Key Benefits: Effortless Caster Adjustability: Enthusiasts can easily fine-tune their caster settings using a turnbuckle jackscrew, allowing for precise alignment customization. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, delivering improved handling performance. Consistent Geometry: With no rubber components to flex, this caster arm maintains unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings for convenience. Efficient Weight Design: Despite offering additional functionality, this caster arm maintains a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings: These bearings provide increased articulation capability, ensuring reliability. Wishbone Protection: Designed to prevent extensive side-swinging, reducing the risk of collisions with the knuckle or steering rod. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (caster arms) Two pairs of CNC billet 6082 aluminum arm mounts Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts Four high-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Caster Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less
Verkline - Corporate Logo
T#:22492998
Part#: WAS-424
Ships in 2 Business Days
$ 599.00 USD
Free Shipping on orders $49 and up
Verkline proudly offers a top-notch solution for BMW G20, G29, and Supra A90/A91 enthusiasts – our high-performance rear spring wishbone bushings. These precision-engineered components have undergone meticulous development, including 3D laser scanning, CAD design, FEA testing, and demanding road trials, ensuring uncompromising quality. With this kit, you can effortlessly upgrade the second bearing (number 13 on the picture) from rubber to uniball, perfectly complementing the factory uniball (mount number 18 on the picture). Enjoy a wide array of benefits, including: Augmented strength and rigidity for unmatched handling performance Maintain precise geometry during alignments by eliminating rubber deformation Key Features: A user-friendly bolt-in kit, requiring no vehicle modifications Pre-assembled inserts for a hassle-free installation Includes a specialized tool for easy insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with top-quality motorsport spherical bearings A comprehensive kit with all necessary components for straightforward mounting Compatible with OEM wishbone and upright components What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for upright and arm assembly A tool for easy insert replacement Printed installation instructions Fits these BMW models: BMW G20 BMW G29 Toyota Supra A90 / A91
Show More Show Less


Tension strut ball joint kit
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:23284050
Part#: D280-0019
Back Ordered
11% off MSRP $ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 519.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 519.99 USD
Free Shipping on orders $49 and up
Verkline - Corporate Logo
T#:22525957
Part#: WAS-412
Ships in 10 Business Days
$ 499.00 USD
Free Shipping on orders $49 and up
Verkline is proud to unveil their Front Bump Steer Adjustable Tie Rod Ends, the culmination of extensive development and rigorous testing. These cutting-edge components have undergone a meticulous journey, which includes 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with these high-performance tie rod ends. Key Advantages: User-Friendly Length Adjustability: Enthusiasts can easily fine-tune the tie rod end's length to achieve optimal corner weights without sway bar preload, ensuring even suspension heights. Enhanced Strength and Rigidity: Verkline's design guarantees increased strength and rigidity, resulting in improved handling performance. Replaceable High-Quality Uniballs: In case of ball joint wear, there's no need to replace the entire tie rod end. Verkline utilizes easily obtainable, high-quality uniballs for convenience. Noteworthy Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Links: The tie rod ends arrive pre-assembled, simplifying the installation process. Robust Full-Length Pins: Precision-machined from high-strength steel, these pins ensure durability and reliability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, these turnbuckles offer superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Sway Bar and Coil-Over Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front tie rod ends Two pairs of CNC machined Cr-Mo upright pins Thin locking nuts High-quality motorsport spherical bearings Set of pin spacers for bump steer adjustment Printed installation instructions Automotive enthusiasts can now experience the precision and performance of Verkline's Front Bump Steer Adjustable Tie Rod Ends, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. These components are designed to be compatible with OEM sway bars and coil-over setups, providing versatility for various vehicle configurations. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less
Meyle - Corporate Logo
T#:5691205
Part#: 33326861126
Ships on Sep 9, 2026
$ 105.99 USD
Free Shipping on orders $49 and up
Bushings wear out over time, becoming weaker and more likely to transmit excess movement to nearby suspension components. Eliminate this suspension slop with a brand new control arm from Meyle!

Meyle Steel Front Lower Control Arm - Left - E32, E34
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579401
Part#: 31121139991
Ships on Sep 9, 2026
$ 67.99 USD
Free Shipping on orders $49 and up
Includes bushing and ball joint

Front Straight Control Arm - Left
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376675
Part#: 31121141961
Ships on Sep 9, 2026
$ 80.99 USD
Free Shipping on orders $49 and up

Brand: Meyle 

 

This is the Front Left Lower Control Arm for BMW E39 540i 540i Wagon & M5. The lower control arms include the ball joint and bushing.

This item fits the following BMWs:
1997-2003 E39 5 Series BMW 540i, 540i Wagon, M5

Show More Show Less
Meyle - Corporate Logo
T#:5691206
Part#: 33326861125
Ships on Sep 9, 2026
$ 105.99 USD
Free Shipping on orders $49 and up
Bushings wear out over time, becoming weaker and more likely to transmit excess movement to nearby suspension components. Eliminate this suspension slop with a brand new control arm from Meyle!

Meyle Front Lower Control Arm - Right - BMW F22/23 F3X RWD
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36100107
Part#: 31126852992
Ships on Sep 9, 2026
$ 92.99 USD
Free Shipping on orders $49 and up
Failed control arms often cause vibrations and shaking felt through the steering wheel, which may intensify with speed or braking. Additional symptoms include suspension noise, misaligned steering, and accelerated tire wear.
Show More Show Less
Meyle - Corporate Logo
T#:36201625
Part#: 33326867537
Ships on Sep 9, 2026
$ 102.99 USD
Free Shipping on orders $49 and up
The rear trailing arm links the chassis to the rear suspension, ensuring stability and accurate wheel alignment. It is essential for maintaining smooth handling, enhanced ride comfort, and reliable suspension performance.
Show More Show Less

Rear Upper Control Arm - Right
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36201622
Part#: 33326777426
Ships on Sep 9, 2026
$ 90.99 USD
Free Shipping on orders $49 and up
Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This item fits the following BMWs: BMW 5 Series - 525i, 530i, 545i
Show More Show Less

Meyle - Corporate Logo
T#:579402
Part#: 31121139992
Ships on Sep 9, 2026
$ 67.99 USD
Free Shipping on orders $49 and up

Control arms begin to wear over time, leading to sloppy control of your vehicle. Anything from knocking, steering vibration, or even loss of vehicle control could occur. An OEM replacement from Lemförder is the perfect option to restore control and suspension quality.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Meyle Front Control Arm - Left - E38
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:361250
Part#: 31121142087
Ships on Sep 9, 2026
$ 82.99 USD
Free Shipping on orders $49 and up
Complete control arm with bushings and ball joint. This is the straight control arm
Meyle Front Lower Control Arm - Right - E60
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:378643
Part#: 31122347965
Ships on Sep 9, 2026
$ 112.99 USD
Free Shipping on orders $49 and up
Control arm with ball joint. Found in the rear position


Meyle Front Lower Control Arm - Right - E53
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376279
Part#: 31126760276
Ships on Sep 9, 2026
$ 72.99 USD
Free Shipping on orders $49 and up
Ball joint faces upward
Front Straight Control Arm - Right
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376678
Part#: 31121141962
Ships on Sep 9, 2026
$ 86.99 USD
Free Shipping on orders $49 and up
This is the Front Right Lower Control Arm for BMW E39 540i 540i Wagon and M5.

This item fits the following BMWs:
1997-2003  E39 5 Series  BMW 540i, 540i Wagon, M5
Show More Show Less
Meyle Front Control Arm - Right - E38
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:361251
Part#: 31121142088
Ships on Sep 9, 2026
$ 98.99 USD
Free Shipping on orders $49 and up
Complete control arm with bushings and ball joint. This is the straight control arm

Meyle Aluminum Front Lower Control Arm - Right - E32, E34
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:380388
Part#: 31121139988
Ships on Sep 9, 2026
$ 60.99 USD
Free Shipping on orders $49 and up
$ 60.99 USD
Free Shipping on orders $49 and up
Includes bushing and ball joint

Meyle Rear Control Arm - Right - G05 X5, G06 X6, G07 X7
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:26238421
Part#: 33306878030
Ships on Sep 9, 2026
$ 125.99 USD
Free Shipping on orders $49 and up
If your control arm is bent or the bushings are worn out, replace it with this Meyle control arm to restore handling and ride quality to your BMW.
Verkline - Corporate Logo
T#:22525955
Part#: WAS-411
In Stock
$ 999.00 USD
Free Shipping on orders $49 and up
Verkline proudly presents their Front Adjustable Camber Arm, a product that has undergone a thorough development and testing program. These state-of-the-art components have followed a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts have the opportunity to elevate their driving experience with this high-performance camber arm. Key Advantages: Effortless Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings using a turnbuckle jackscrew, enabling precise alignment adjustments. Roll Center Adjustability: These camber arms offer roll center adjustability with spacers, providing greater control over the vehicle's handling dynamics. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these camber arms maintain unaltered geometry during alignment adjustments, ensuring precision. Replaceable Spherical Bearings and Uniballs: In case of ball joint wear, there's no need to replace the entire arm. Verkline utilizes easily obtainable, high-quality spherical bearings and uniballs for convenience. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying the installation process. Robust Pin and Adjustment Sleeve: Precision-machined from high-strength steel, these components ensure long-lasting durability. CNC Machined Arm: Crafted from 6082 T6 aluminum, the arm offers superior strength and performance. High-Quality Spherical Bearings and Uniballs: These components feature top-tier spherical bearings and uniballs, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Robust, Adjustable Xenon Sensor Mounting: Designed for versatility and durability, offering compatibility with xenon sensors. Complete Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle, Subframe, and Xenon Sensor Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum front wishbones (camber arms) Two pairs of CNC machined Cr-Mo upright pins Two pairs of CNC machined Cr-Mo adjustment turnbuckles Thin locking nuts High-quality motorsport spherical bearings and uniballs Lightweight aluminum spacer sleeves for easy assembly of the arm in the front subframe Set of pin spacers for roll center adjustment Adjustable xenon sensor mounting Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can now experience the precision and performance of Verkline's Front Adjustable Camber Arm, allowing them to enhance their vehicle's handling and alignment for a more controlled and responsive driving experience. To optimize roll center, it's recommended to add spacers on the front toe link, which can be achieved using Verkline's bump steer adjustable tie rod ends. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91
Show More Show Less

Meyle - Corporate Logo
T#:5691212
Part#: 31106878081
In Stock
$ 242.99

This product was last offered at the strikethrough price on
05-07-2026

$ 132.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 242.99

This product was last offered at the strikethrough price on
05-07-2026

$ 132.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
The road can take a serious toll on your suspension. Pot holes, speed bumps, and road hazards all contribute to a sloppy and weak suspension. After years of service, the control arm's non-serviceable ball joints can begin to wear out, causing the steering to not feel as tight, as well as steering wobble and clunking when turning. To give a better feel to your driving experience, change components as they wear to improve safety and ride comfort. If replacing any part of your front or rear suspension, it is best to either do it in pairs (both left and right sides), or examine parts that are prone to failure. This will provide the most service life out of replacement parts and assure they are all performing properly.
Show More Show Less
Ball Joint Outer - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:592352
Part#: 31109803662
Ships in 1 Business Day
$ 33.37

This product was last offered at the strikethrough price on
03-09-2026

$ 32.12 USD
Free Shipping on orders $49 and up
$ 32.12 USD
Free Shipping on orders $49 and up

Alta Performance - Corporate Logo
T#:29002071
Part#: AMPSUS112
In Stock at Vendor
$ 216.99 USD
Free Shipping on orders $49 and up

MINI R Chassis Positive Steering Response System (PSRS) w/Urethane Bushing

Engineered for Mini Cooper R Chassis owners seeking improved handling, this system offers a host of benefits:

  • Enhanced steering response for precise control
  • Reduced body roll for better cornering performance
  • Urethane bushings for improved durability and reliability
  • Easy installation with included hardware
Show More Show Less

Meyle - Corporate Logo
T#:54388483
Part#: 31126864822
Ships in 2 Business Days
New Item
$ 193.99

This product was last offered at the strikethrough price on
06-18-2026

$ 190.99 USD
Free Shipping on orders $49 and up
$ 190.99 USD
Free Shipping on orders $49 and up
When you're chasing the perfect line or just looking for maximum feedback through the steering wheel, worn suspension components are your worst enemy. Factory front control arms are notorious for developing play in the inner bushings and ball joints, leading to a loose front end, dynamic alignment changes under braking, and a numb steering feel.
Show More Show Less
Trailing Arm Bushing
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594605
Part#: 33326763092
Ships in 2 Business Days
$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up
As your vehicle ages, rubber components begin to break down, allowing excess movement in the components that require a firm mounting point the most. If your rear end feels loose, or wanders over bumps, your rear trailing arm bushings may be to blame.
Show More Show Less
Rogue Engineering - Corporate Logo
T#:35829340
Part#: RE_E9X_CAMNO
Ships in 8 Business Days
$ 595.00 USD
Free Shipping on orders $49 and up

Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

Key Features:

These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

Show More Show Less


Rogue Engineering - Corporate Logo
T#:34885415
Part#: RE.ARCA.2.RE
Ships in 8 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
Meyle - Corporate Logo
T#:56724721
Part#: 31106879543
Ships in 2 Business Days
New Item
$ 238.99 USD
Free Shipping on orders $49 and up
$ 238.99 USD
Free Shipping on orders $49 and up
Maintain the legendary chassis dynamics of your modern BMW with the MEYLE HD Front Lower Right Control Arm. When pushing your G2X BMW to the limit on backroads or at the track, weak or worn factory suspension components can severely compromise turn-in sharpness and braking stability. MEYLE’s High Durability line takes the factory BMW design and beefs it up, re-engineering the internal components of the ball joint and utilizing higher-grade rubber in the bushings to reduce unwanted deflection under heavy lateral loads. The result is a highly reinforced, track-ready aluminum control arm that keeps your suspension geometry locked in, giving you the confidence and steering precision you demand from the ultimate driving machine.
Show More Show Less
Rear Guide Link - Right
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594475
Part#: 33326775084
Ships in 1-2 days
$ 105.99 USD
Free Shipping on orders $49 and up
Triangulates the front of the rear carrier to the subframe

Control Arm With Bushing
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36201616
Part#: 31106878082
Ships in 3 Business Days
$ 259.99

This product was last offered at the strikethrough price on
05-07-2026

$ 252.99 USD
Free Shipping on orders $49 and up
$ 252.99 USD
Free Shipping on orders $49 and up
The control arm links the suspension to the chassis, maintaining proper wheel alignment and stability. Its built-in bushing minimizes vibrations and enables smooth motion, enhancing ride comfort and handling performance.
Show More Show Less

Meyle - Corporate Logo
T#:50066861
Part#: 31106883115
In Stock
New Item
$ 162.99 USD
Free Shipping on orders $49 and up
Replaces bent or broken control arm
Control Arm Bushing
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:5944217
Part#: 31126855509
Ships on Sep 9, 2026
$ 14.99 USD
Free Shipping on orders $49 and up
Rebuild your front suspension with a brand trusted by enthusiasts worldwide to keep your ultimate driving machine handling exactly as it should.

KMAC - Corporate Logo
T#:31423675
Part#: 195026K
Special Order: No Guaranteed ETA
$ 480.00 USD
Free Shipping on orders $49 and up

MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms - Pair are designed to enhance the handling and performance of your MINI. These high-duty camber adjustable lower arms are crafted for competition use, featuring durable chrome-moly tubing and high-quality bushings. They provide precise camber adjustment to optimize wheel alignment and handling characteristics, making them ideal for track or spirited driving.

Key benefits of the MINI 2nd and 3rd Gen Rear Competition HD Camber Adjustable Lower Arms - Pair include:

  • Enhanced Handling: Allows for precise camber adjustments to fine-tune wheel alignment for improved handling and stability.
  • High-Duty Construction: Made from chrome-moly tubing for superior strength and durability under high-stress conditions.
  • Improved Performance: Designed for competition use, these arms are built to withstand rigorous driving demands.
  • Durable Bushings: Equipped with high-quality bushings to ensure reliable performance and longevity.
  • Optimized Alignment: Facilitates better alignment adjustments, contributing to enhanced driving dynamics and tire wear.
Show More Show Less
Control Arm Bushing
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36303297
Part#: 3146100013
Ships on Sep 9, 2026
$ 21.99 USD
Free Shipping on orders $49 and up
A control arm bushing minimizes vibrations and facilitates smooth motion between the control arm and the vehicle's frame or suspension, improving ride comfort and handling stability.

Meyle - Corporate Logo
T#:362101
Part#: 33326770749
Ships on Sep 9, 2026
$ 28.99 USD
Free Shipping on orders $49 and up
Attaches to rear ball joint and rear wishbone assembly

Meyle - Corporate Logo
T#:36100122
Part#: 3147110004
Ships on Sep 9, 2026
$ 27.99 USD
Free Shipping on orders $49 and up
Within as few as 50,000 miles, the rear control arms on your vehicle can begin to creak, groan, and compromise stability on the road. Worn bushings in the control arms may fail to maintain proper alignment, causing your vehicle to "wander" at highway speeds due to excessive play. Replacing the control arm bushings is the only way to restore your vehicle’s original ride quality and handling performance.
Show More Show Less
Meyle Rear Control Arm - Left - E38, E52
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362099
Part#: 33326770059
Ships on Sep 9, 2026
$ 83.99 USD
Free Shipping on orders $49 and up
High quailty replacement for your vehicles suspension
Meyle - Corporate Logo
T#:40309023
Part#: 33326883340
Back Ordered
$ 124.99 USD
Free Shipping on orders $49 and up
Restore the performance and comfort of your BMW’s suspension with the Meyle - Rear Upper control arm - right and enjoy sharper handling, better ride quality, and long-term dependability.