Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

JT Design - Corporate Logo
T#:3666
Part#: JTD909
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401369
Part#: IRPRTM-P
In Stock
$ 110.00 USD
Free Shipping
$ 110.00 USD
Free Shipping

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

Meyle Upper Strut Mount - E36, Z3, Z4
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:375473
Part#: 31336779613
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Should be replaced each time shocks are replaced due to this being a wearing item

SPL Parts - Corporate Logo
T#:17804825
Part#: SPLRLCBE9X
In Stock
$ 152.00 USD
Free Shipping on orders $49 and up
These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87
Show More Show Less
Front Differential Bushing - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:362591
Part#: 33171090389
In Stock
$ 28.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up

IRP - Individual Racing Parts - Corporate Logo
T#:587022
Part#: IRPRSM-90B
In Stock
$ 195.00 USD
Free Shipping
$ 195.00 USD
Free Shipping
The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
Show More Show Less
Revshift - Corporate Logo
T#:582005
Part#: PTABE6GREEN
Ships in 1 Business Day
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a standard 10mm pin diameter
Revshift - Corporate Logo
T#:1105924
Part#: RSM-E6-10MM
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
Show More Show Less

Rear Differential Mount - Front Position
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594515
Part#: 33316792873
Ships in 2 Business Days
$ 41.99

This product was last offered at the strikethrough price on
05-07-2026

$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up
Over time bushings deteriorate and become ineffective. Replace them to reduce noise and harshness. Priced Each. Two required for complete service.
Revshift - Corporate Logo
T#:582007
Part#: PSBE36GREEN
Ships in 3 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Meyle Front Control Arm Bracket - E30 E36 Z3
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:178014
Part#: 31121136532MY
Ships on Dec 24, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Restore precise steering feel and eliminate unwanted noise. This Meyle bracket includes pre-pressed bushings for a straightforward installation, directly replacing worn components.


Meyle Rear Subframe Bushing - E39
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579247
Part#: 3003331104
Ships on Dec 24, 2026
$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up
Used on all four corners of rear subframe.
Revshift - Corporate Logo
T#:582006
Part#: PTABE30GREEN
In Stock
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Meyle - Corporate Logo
T#:178013
Part#: 31121136531MY
Ships on Dec 24, 2026
$ 42.99 USD
Free Shipping on orders $49 and up
Restore precise front-end feel and handling with this Meyle HD Front Left Control Arm Bushing and Bracket assembly. Engineered for durability, it includes the bracket and mounting hardware for a straightforward, performance-oriented replacement.
Show More Show Less

Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:582008
Part#: PSBE36BLACK
Ships in 2 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Rear Subframe Bushing - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:599854
Part#: 33316758259
In Stock
$ 47.99

This product was last offered at the strikethrough price on
03-23-2026

$ 36.99 USD
Free Shipping on orders $49 and up
$ 36.99 USD
Free Shipping on orders $49 and up
The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
Show More Show Less

Front Upper Strut Mount - Priced Each
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:10128436
Part#: 31306785962
Ships in 2 Business Days
$ 87.99

This product was last offered at the strikethrough price on
05-07-2026

$ 85.99 USD
Free Shipping on orders $49 and up
$ 85.99 USD
Free Shipping on orders $49 and up
Replace your worn-out mounts whenever servicing your suspension to maintain comfort and performance.
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a larger 12mm pin diameter
Revshift - Corporate Logo
T#:1105925
Part#: RSM-E6-12MM
Ships in 2 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
Show More Show Less

Revshift - Corporate Logo
T#:1105916
Part#: PSB-E3095A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105909
Part#: RBK-E3095A
Ships in 5 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105899
Part#: FBK-E36C95A
Ships in 5 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts - Corporate Logo
T#:13957906
Part#: SPL-RKB-F3X
Ships in 1 Business Day
$ 169.00 USD
Free Shipping on orders $49 and up
These Rear Traction Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. The folks at SPL use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment.
Show More Show Less


Upper Strut Mount / Bearing - 2002, 2002tii, E21 320i
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:359655
Part#: 31331110195
Ships on Dec 24, 2026
$ 40.99 USD
Free Shipping on orders $49 and up
This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber and it can shorten the life of your shocks.
Show More Show Less
Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:367404
Part#: 31336752735
Ships on Dec 24, 2026
$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Direct replacement strut mount with integrated bearing for precise steering feel.
Meyle Rear Upper Strut/Shock Mount - E60 E63 E65 E66
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579352
Part#: 3147410000
Ships on Dec 24, 2026
$ 32.99 USD
Free Shipping on orders $49 and up

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high-quality Meyle replacement to ensure a tight, noise-free ride.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Meyle Front Inner Ball Joint - E30
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:592190
Part#: 31121126253
Ships on Dec 24, 2026
$ 20.99 USD
Free Shipping on orders $49 and up
Front lower ball joint from control arm to lower sub frame

Meyle Rear Upper Shock Mount - BMW F22/23 F3X F48 F39
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:8677200
Part#: 33506791706
Back Ordered
$ 34.99 USD
Free Shipping on orders $49 and up
Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a Genuine BMW replacement to ensure a tight, noise-free ride. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Front Upper Strut Mount - 5 Bolt
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36201619
Part#: 31306881929
Back Ordered
$ 84.99 USD
Free Shipping on orders $49 and up
One often overlooked piece is the upper strut bearing and mount. This is the top mount for your struts and provides a solid platform for your front suspension. If worn, the bearings within this mount make noise, there is slop from worn rubber, and it can shorten the life of your shocks. To get the most out of your new suspension setup, it's recommended that you replace all parts that are known to fail. Not only will this make your new setup more effective, it will provide a better ride, proper tire position, and make all of your parts last longer.
Show More Show Less

SPL Parts - Corporate Logo
T#:587636
Part#: SPL-CRB-F3IX
In Stock
$ 413.00 USD
Free Shipping
$ 413.00 USD
Free Shipping
SPL Parts FKS Series Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
SPL Parts - Corporate Logo
T#:553806
Part#: SPLCRBE9X
Ships in 1 Business Day
$ 413.00 USD
Free Shipping
$ 413.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

Revshift - Corporate Logo
T#:1105926
Part#: ASB-E9X
Ships in 5 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
Show More Show Less

Revshift - Corporate Logo
T#:1105932
Part#: PSB-E3480A
Ships in 1 Business Day
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts - Corporate Logo
T#:587639
Part#: SPL-CRBN-F3X
Ships in 1 Business Day
$ 359.00 USD
Free Shipping
$ 359.00 USD
Free Shipping
SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction.
Show More Show Less
Revshift - Corporate Logo
T#:1980634
Part#: FBKOFFSET
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components


SPL Parts - Corporate Logo
T#:587638
Part#: SPL-CRBN-F3IX
Ships in 1 Business Day
$ 359.00 USD
Free Shipping on orders $49 and up
SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
Revshift - Corporate Logo
T#:1105904
Part#: PSB-E46M
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

SPL Parts - Corporate Logo
T#:587637
Part#: SPL-CRB-F3X
Ships in 1 Business Day
$ 413.00 USD
Free Shipping
$ 413.00 USD
Free Shipping
SPL Parts FKS Series Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less

Revshift - Corporate Logo
T#:1105922
Part#: PSB-318TI95A
In Stock
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105914
Part#: RBK-E3095A12MM
Ships in 7 Business Days
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105918
Part#: PSB-E30IX95A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105917
Part#: PSB-E3012MM95A
Ships in 7 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:47199273
Part#: PSB-E9X-95A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
JT Design - Corporate Logo
T#:1386
Part#: JTD909-75-KIT
Ships on Sep 1, 2026
$ 32.00 USD
Free Shipping on orders $49 and up
The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).
Show More Show Less