Find Parts That Fit Your Vehicle

BMW Suspension Bushings & Mounts

Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Sub-Categories

Sort By:

BMW E9X Front Upper Strut Mount - Priced Each
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:594663
Part#: 31336775097
In Stock
$ 46.99 USD
Free Shipping on orders $49 and up
The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.
Price is per mount. Left and Right are the same.

This item fits the following BMWs:
2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
Show More Show Less
OEM Sachs Rear Shock Mount - E39 525/528/530/540i (w/o EDC)
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:369231
Part#: 33521091710
In Stock
$ 47.99

This product was last offered at the strikethrough price on
04-30-2026

$ 28.99 USD
Free Shipping on orders $49 and up
$ 28.99 USD
Free Shipping on orders $49 and up
While replacing rear shocks it is a good idea to inspect / replace these mounts as the rubber can wear and crack over time. This mounts at the top of the rear shock and is held into the chassis with 3 bolts.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401369
Part#: IRPRTM-P
In Stock
$ 110.00 USD
Free Shipping
$ 110.00 USD
Free Shipping

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension. 

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

SPL Parts - Corporate Logo
T#:17804825
Part#: SPLRLCBE9X
In Stock
$ 152.00 USD
Free Shipping on orders $49 and up
These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:587022
Part#: IRPRSM-90B
In Stock
$ 195.00 USD
Free Shipping
$ 195.00 USD
Free Shipping
The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
Show More Show Less

OEM Sachs Upper Front Strut Mount - E39 540i M5, E52 Z8
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:348794
Part#: 31331091708
Ships in 1 Business Day
$ 91.64 USD
Free Shipping
$ 91.64 USD
Free Shipping
This is the front shock mount that connects the top of the front shock to the body of the car. Sold Individually.
Revshift - Corporate Logo
T#:582005
Part#: PTABE6GREEN
Ships in 1 Business Day
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a standard 10mm pin diameter
Revshift - Corporate Logo
T#:1105924
Part#: RSM-E6-10MM
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.
Show More Show Less

Revshift - Corporate Logo
T#:582007
Part#: PSBE36GREEN
Ships in 3 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582006
Part#: PTABE30GREEN
In Stock
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
$ 79.99

This product was last offered at the strikethrough price on
08-12-2026

$ 72.99 USD
Limited Qty Sale
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582015
Part#: PCABE30BLACK
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less


Revshift - Corporate Logo
T#:582008
Part#: PSBE36BLACK
Ships in 2 Business Days
$ 159.99 USD
Free Shipping
$ 159.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3
For shocks with a larger 12mm pin diameter
Revshift - Corporate Logo
T#:1105925
Part#: RSM-E6-12MM
Ships in 2 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.
Show More Show Less
Revshift - Corporate Logo
T#:1105916
Part#: PSB-E3095A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105909
Part#: RBK-E3095A
Ships in 5 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105899
Part#: FBK-E36C95A
Ships in 5 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts - Corporate Logo
T#:13957906
Part#: SPL-RKB-F3X
Ships in 1 Business Day
$ 169.00 USD
Free Shipping on orders $49 and up
These Rear Traction Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. The folks at SPL use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment.
Show More Show Less

Genuine MINI - Corporate Logo
T#:414735
Part#: 31126757551
Ships in 2 Business Days
13% off MSRP $ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 95.68

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.10 USD
Free Shipping on orders $49 and up
Genuine MINI - Corporate Logo
T#:193089
Part#: 33506867478
Ships in 2 Business Days
9% off MSRP $ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
9% off MSRP
$ 130.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping
Genuine Mini Guide Support

OEM Sachs Trailing Arm Bushing Pair - E30 E10 E12 E21 E23 E24, E28 52...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:370564
Part#: 33329061945
Ships on Jan 18, 2027
$ 46.99 USD
Free Shipping on orders $49 and up

OEM quality rear suspension bushing replacement. This bushing is a common cause of noise in the rear.

Bushing Diameter: 30MM


Genuine BMW Motorsport - Corporate Logo
T#:12076
Part#: E9X-GPN-SUBFRAME
In Stock
$ 800.00 USD
Free Shipping
$ 800.00 USD
Free Shipping
The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

Price is for the set of 4 mounts.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
SPL Parts - Corporate Logo
T#:587636
Part#: SPL-CRB-F3IX
In Stock
$ 413.00 USD
Free Shipping
$ 413.00 USD
Free Shipping
SPL Parts FKS Series Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
Genuine MINI - Corporate Logo
T#:22938
Part#: 33526754124
In Stock
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
Genuine MINI RIGHT GUIDE SUPPORT


Genuine MINI - Corporate Logo
T#:55350
Part#: 31356778827
In Stock
4% off MSRP $ 32.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.60 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 32.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.60 USD
Free Shipping on orders $49 and up
Genuine MINI STABILIZER SUPPORT
Genuine MINI - Corporate Logo
T#:22937
Part#: 33526754123
In Stock
27% off MSRP $ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping on orders $49 and up
27% off MSRP
$ 130.83

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping on orders $49 and up
Genuine MINI LEFT GUIDE SUPPORT
SPL Parts - Corporate Logo
T#:553806
Part#: SPLCRBE9X
Ships in 1 Business Day
$ 413.00 USD
Free Shipping
$ 413.00 USD
Free Shipping
SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.
Show More Show Less

Revshift - Corporate Logo
T#:1105926
Part#: ASB-E9X
Ships in 5 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Revshift billet aluminum subframe bushings completely replace the oem rubber bushings on the BMW E82, E90, E91, E92, and E93 including the M3, 1M, and XI models. These bushings solid mount the rear subframe reducing wheel hop and improving the vehicles handling capabilities. The two piece bushing design sandwiches the subframe locking it in place. It will not shift on the bushings while driving like the one piece designs allow. They are CNC machined at Revshift in the USA from 6061-T6 billet aluminum.
Show More Show Less

Revshift - Corporate Logo
T#:1105932
Part#: PSB-E3480A
Ships in 1 Business Day
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts - Corporate Logo
T#:587639
Part#: SPL-CRBN-F3X
Ships in 1 Business Day
$ 359.00 USD
Free Shipping
$ 359.00 USD
Free Shipping
SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction.
Show More Show Less

Revshift - Corporate Logo
T#:1980634
Part#: FBKOFFSET
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components
SPL Parts - Corporate Logo
T#:587638
Part#: SPL-CRBN-F3IX
Ships in 1 Business Day
$ 359.00 USD
Free Shipping on orders $49 and up
SPL Parts FKS Series Non-Adjustable Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less

Revshift - Corporate Logo
T#:1105904
Part#: PSB-E46M
Ships in 7 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:582014
Part#: PCABE30GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
SPL Parts - Corporate Logo
T#:587637
Part#: SPL-CRB-F3X
Ships in 1 Business Day
$ 413.00 USD
Free Shipping
$ 413.00 USD
Free Shipping
SPL Parts FKS Series Front Caster Rod Bushings replace the stock flexible rubber bushings with low friction, articulating Spherical Bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under load to improve braking and handling feedback.
Show More Show Less
Revshift - Corporate Logo
T#:1105922
Part#: PSB-318TI95A
In Stock
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
$ 89.99

This product was last offered at the strikethrough price on
07-30-2026

$ 81.99 USD
Limited Qty Sale
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less


Revshift - Corporate Logo
T#:1105914
Part#: RBK-E3095A12MM
Ships in 7 Business Days
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105918
Part#: PSB-E30IX95A
Ships in 7 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105917
Part#: PSB-E3012MM95A
Ships in 7 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:47199273
Part#: PSB-E9X-95A
Ships in 1 Business Day
$ 249.99 USD
Free Shipping on orders $49 and up
Revshift polyurethane subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93, including the M3, 1M, and XI models. These bushings securely mount the rear subframe, reducing wheel hop and improving the vehicle's handling capabilities. The two-piece bushing design sandwiches the subframe, locking it in place. It will not shift on the bushings while driving, like the one-piece designs allow. They are entirely made at Revshift in the USA from our proprietary polyurethane formula and CNC-machined billet aluminum cores.
Show More Show Less

Revshift - Corporate Logo
T#:582013
Part#: PCABE30M3
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582012
Part#: PCABE30M3GREEN
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Genuine MINI - Corporate Logo
T#:54178
Part#: 31122167245
Ships in 2 Business Days
8% off MSRP $ 118.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.38 USD
Free Shipping
8% off MSRP
$ 118.29

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.38 USD
Free Shipping
Genuine MINI SET, CONTROL ARM BALL JOINTS
Genuine MINI - Corporate Logo
T#:21784
Part#: 31126783443
Ships in 2 Business Days
6% off MSRP $ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 80.99 USD
Free Shipping on orders $49 and up
Genuine MINI BALL JOINT

Genuine MINI - Corporate Logo
T#:4469688
Part#: 31128831645
Ships in 2 Business Days
9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
9% off MSRP
$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping

Genuine MINI - Corporate Logo
T#:3239439
Part#: 31128831646
Ships in 2 Business Days
9% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
9% off MSRP
$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
Genuine BMW Motorsport - Corporate Logo
T#:2309
Part#: E9X-GPN-UCAB
Ships in 8 Business Days
$ 413.38 USD
Free Shipping
$ 413.38 USD
Free Shipping
These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

Price is for the pair of bushings.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2011 E91 BMW 328i - Wagon
2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
Show More Show Less
Genuine MINI - Corporate Logo
T#:195113
Part#: 33536863755
Ships in 8 Business Days
11% off MSRP $ 35.98

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 35.98

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.99 USD
Free Shipping on orders $49 and up
Genuine Bmw Set, Spring Base, Lower