This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.

Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

MINI R50 R52 R53 M7 Stage I Suspension Kit

MINI R50 R52 R53 M7 Stage I Suspension Kit is the ultimate upgrade for Mini R50, R52, and R53 models seeking improved handling and performance. Engineered by M7, this Stage I Suspension Kit includes carefully selected components to enhance the driving experience of your Mini. With its premium quality construction and precise fitment, this suspension kit offers improved stability, cornering ability, and overall responsiveness.

Key Benefits:

• Enhanced handling and performance for Mini R50, R52, and R53 models
• Carefully selected components engineered by M7 for optimal performance
• Premium quality construction ensures durability and reliability
• Precise fitment for easy installation and hassle-free maintenance
• Improved stability, cornering ability, and overall responsiveness for a thrilling driving experience

Upgrade your Mini R50, R52, or R53 with the MINI R50 R52 R53 M7 Stage I Suspension Kit to elevate your driving experience to the next level. Invest in this high-quality suspension kit to unlock the full potential of your Mini.

M7 R60/R61 Monster Strut Tower Brace (STB)

A high-performance upgrade designed to enhance the handling and stability of your Mini R60/R61 model. Engineered by M7, a trusted name in Mini performance parts, this strut tower brace reinforces the chassis structure, reducing flex and improving cornering stability. Its durable construction and precise fit ensure long-lasting performance, while its sleek design adds a sporty aesthetic to your Mini. Experience improved handling and driving dynamics with the M7 R60/R61 Monster Strut Tower Brace.

• Enhances handling and stability
• Reinforces chassis structure for reduced flex
• Improves cornering stability
• Durable construction for long-lasting performance
• Sleek design adds sporty aesthetic