Center Support Bearing

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E36 E46 Z...

T#:4988548

Part#: BMW04A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier - Street Bushings - BMW...

T#:4744858

Part#: BMW01A0-S

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The stock center support bearing carrier is engineered to minimize noise, vibration, and harshness (NVH) in the cabin by loosely securing the center bearing with a soft rubber bushing. However, this design allows the driveshaft to move off-center during launches and shifts, reducing throttle response and causing drivetrain oscillations. Over time, the rubber bushing can sag or dry rot, leading to misalignment of the driveshaft.

Prevent or fix this common problem with JXB Performance's Driveshaft Center Support Bearing Upgrade! This upgrade features a simple yet highly effective 2-piece design that makes installation and bushing replacement effortless. The stock carrier is cut away, and the JXB bushings securely "clamp" the driveshaft bearing in place, ensuring constant driveshaft alignment.

The Street bushing option from JXB is the most popular choice, offering a significant improvement over the stock design while keeping NVH levels minimal.

Note: Some light NVH, such as a soft hum, may occur at certain speeds. However, with a modified exhaust or open windows, it’s unlikely to be noticeable.

Installation is straightforward and doesn’t require removing the driveshaft. The 2-piece design clamps directly onto the OEM bearing, though removing the old carrier will require a cutting tool.

Need replacement or additional bushings? See T#4799658 for replacement street bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E70/71 F1...

T#:6076533

Part#: BMW12A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E81/82/88...

T#:4744864

Part#: BMW01A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - G20 3-Series,...

T#:6076534

Part#: BMW13A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Center Support - 26128615621

T#:36676178

Part#: 26128615621

In Stock

Sale - Save 20% $ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 52.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 52.79 USD

Add to Wish List

The drive shaft support bearing is essential for stabilizing the drive shaft and ensuring smooth, efficient power delivery. Over time, the rubber mount surrounding the bearing can degrade, leading to excessive drive shaft movement and noticeable vibrations.

If you notice a thudding or clunking noise during acceleration, especially coming from beneath the center console, a failed center support bearing is likely the cause. Bremmen Parts provides a reliable and affordable replacement solution, designed to restore your BMW’s performance and driving comfort.

Show More Show Less

Driveshaft Carrier Spare Bushing Set - Track

Spare bushings only - does not include new carrier assembly

T#:4799659

Part#: BSH04A1

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

Driveshaft Carrier Spare Bushing Set - Street

Spare bushings only - does not include new carrier assembly

T#:4799658

Part#: BSH04A0

Ships in 5 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E39 540i ...

T#:6061694

Part#: BMW06A0

Ships in 1 Business Day

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Meyle Driveshaft Center Support - E36, E39, Z3

We Price Match - Give Us A Call or Chat!

T#:359503

Part#: 26121226731

Back Ordered

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Replacement center support bearing for the driveshaft from Meyle. Often the cause of annoying vibrations and clunking noises during take-offs.

This item fits the following BMWs:
Manual Transmission
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325is 325ic 328i 328is 328ic
12/94-1995 E36 BMW 325i Sedan
1997-2003 E39 BMW 525i 530i

Automatic Transmission
1992-1998 E36 BMW 318ti 323is 323ic 328i 328is 328ic
1998-2003 E39 BMW 525i 528i 530i
1999-2002 Z3 BMW Z3 2.5i Z3 3.0i

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E60/61 E6...

T#:22394036

Part#: 4744865TCKTS6J5G

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E30 RWD (...

T#:6061687

Part#: BMW03A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E60/61 E6...

T#:4744865

Part#: BMW02A0

Ships in 1 Business Day

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW F01/02 7-...

T#:6076536

Part#: BMW14A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E85/E86 Z...

T#:18070238

Part#: 7687533TCKHMEMIR

In Stock at Vendor

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade

T#:25772541

Part#: 4507854PDKNGJY2Q

Ships in 5 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E85/E86 E...

T#:7687533

Part#: BMW15A0

In Stock at Vendor

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6151348

Part#: BMW13A0-T

Ships in 5 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

Meyle Driveshaft Center Support Bearing - E30 88-91, E30 M3, E32, E34...

We Price Match - Give Us A Call or Chat!

T#:579239

Part#: 3002612191/S

Ships on Dec 22, 2026

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Replacement center support bearing for the driveshaft. Often the cause of annoying vibrations and clunking noises during take-offs.

This item fits the following BMWs:
1988-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1989-1995 E34 BMW 525i 530i 535i M5
1988-1994 E32 BMW 735i 735il

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E30 3-Ser...

T#:6061699

Part#: BMW09A0

In Stock

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade

T#:25540331

Part#: 4488208PDKVXXZYU

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW F10 M5, F...

T#:6061697

Part#: BMW08A0

In Stock

Sale - Save 19% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD

Add to Wish List

Sale - Save 19%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 242.84 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E3 E10 E1...

T#:6061700

Part#: BMW10A0

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E65 E66 7...

T#:6061690

Part#: BMW05A0

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E60 M5, E...

T#:6061696

Part#: BMW07A0

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Driveshaft Center Mount

We Price Match - Give Us A Call or Chat!

T#:36032351

Part#: 26127501257

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Center driveshaft support with an integrated bearing securely pressed into a rubber mount.

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6061652

Part#: BMW08A0-T

Ships in 5 Business Days

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

Driveshaft Center Support Bearing Carrier Upgrade - BMW E46 (AWD) 3 S...

T#:34382132

Part#: BMW17A0

Ships in 4 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Driveshaft Center Support Bearing Carrier Upgrade - BMW E46 (AWD) 3 S...

T#:34382135

Part#: BMW17A0SH

Ships in 4 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

Driveshaft Center Support Bearing Carrier Upgrade - BMW E46 (AWD) 3 S...

T#:34382133

Part#: BMW17A0-H

Ships in 4 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6151351

Part#: BMW12A0-T

Ships in 6 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

JXB Driveshaft Center Support Bearing Carrier Upgrade - BMW E53 X5 ...

T#:6076532

Part#: BMW11A0

Ships in 8 Business Days

Starting at $ 299.99 USD

Add to Wish List

Starting at $ 299.99 USD

Add to Wish List

The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.

Show More Show Less

Toyota Supra A90/A91 Driveshaft Center Support Bearing Carrier Upgrad...

T#:56471630

Part#: TYT01A0-B

Ships in 9 Business Days

$ 329.99 USD

Add to Wish List

Qty

$ 329.99 USD

Add to Wish List

Driveshaft Center Support Bearing

We Price Match - Give Us A Call or Chat!

T#:594530

Part#: 26121227997

Special Order: No Guaranteed ETA

$ 47.99 USD

Add to Wish List

Qty

$ 47.99 USD

Add to Wish List

Center support bearings help to add some support to the driveshaft in a BMW. Because it is designed to be a two piece system, bracing needs to be added to the center to keep your driveshaft in line and tight. If you are noticing excessive vibration or gear noise in your vehicle, it may be time to replace the support bearing.

Show More Show Less

Meyle Driveshaft Support - E39

We Price Match - Give Us A Call or Chat!

T#:4908047

Part#: 26121229431

Special Order: No Guaranteed ETA

$ 135.99 USD

Add to Wish List

Qty

$ 135.99 USD

Add to Wish List

Quality Meyle Replacement Propeller shaft/ Driveshaft support.

Meyle Drive Shaft Center Support Bearing - BMW E70 E71 F15 F16 F25 ...

T#:55497401

Part#: 3002612113

Special Order: No Guaranteed ETA

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Engineered to maintain strict driveline alignment, this Meyle Drive Shaft Center Support Bearing mitigates harmonic resonance and rotational deflection across two-piece driveshaft assemblies. Constructed with an OE-grade vulcanized rubber cushion and a high-load-capacity, pre-greased ball bearing, it effectively isolates the chassis from drivetrain NVH (Noise, Vibration, and Harshness). Installing this precision-manufactured component ensures optimal torsional stability, reducing premature fatigue on adjacent universal joints and transmission output seals.

Show More Show Less

OEM Schaeffler Driveshaft Center Support Bearing

T#:41965066

Part#: 6006-2RSR

In Stock

$ 13.99

This product was last offered at the strikethrough price on
08-07-2026

$ 12.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 13.99

This product was last offered at the strikethrough price on
08-07-2026

$ 12.99 USD

Limited Qty Sale

Add to Wish List

Center support bearings help to add some support to the driveshaft in a BMW. Because it is designed to be a two piece system, bracing needs to be added to the center to keep your driveshaft in line and tight. If you are noticing excessive vibration or gear noise in your vehicle, it may be time to replace the support bearing.

Show More Show Less

Driveshaft Center Mount

T#:44733239

Part#: 26127501257

In Stock

Sale - Save 13% $ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 16.52 USD

Add to Wish List

Qty

Sale - Save 13%

$ 18.99

This product was last offered at the strikethrough price on
05-03-2026

$ 16.52 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results