Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Maintain your driving machine's optimal performance with regular maintenance. BMW's recommended oil change intervals vary depending on driving habits. For enhanced performance, an oil change every 5,000 miles is advised for aggressive or city driving, while a maximum of 10,000 miles is recommended otherwise.
This comprehensive kit includes:
Ensure your BMW operates flawlessly with this premium service kit from Turner Motorsport.
Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.
One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.
Comprehensive Kit Includes:
Valve Cover Gasket Set Profile Gasket (HPFP) 2x O-ring (Camshaft Position Sensor) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.
All the hardware you need to remove and replace your front and rear suspension with new coilovers.
This Kit includes the following items:
FRONT
Front strut mount bolts - QTY 8
Front strut mount nuts - QTY 2
Front sway bar end links nuts - QTY 2
Front strut pinch bolts - QTY 2
Front strut pinch bolt nuts - QTY 2
REAR
Lower shock mounting bolts - QTY 2
Lower shock locking nuts - QTY 2
Upper shock mounting bolts - QTY 6
The Akrapovic Rear Wing Forged Carbon Fiber - G20 G80 G82 G83 is a premium aerodynamic upgrade designed for BMW M3, M330i, M340i, and other compatible models. Crafted from lightweight, handcrafted chopped carbon fibre and finished with a high-gloss lacquer, this rear wing combines striking aesthetics with motorsport-inspired performance. The swan neck design, supported by CNC-machined aluminium brackets, ensures an optimal balance between weight reduction and structural strength. High-grade titanium reinforcements at pivot points enhance durability, while the aerofoil design maximizes downforce and minimizes drag for superior handling. Fully adjustable to three levels, this wing allows drivers to customize their setup for peak performance. ABE approved with KBA 31882 type certification, it is road-legal and features an understated Akrapovič monochrome logo on each side for a refined touch. Optimized using computational fluid dynamics (CFD), this wing ensures minimal air turbulence and noise, making it a perfect fit for BMW G20 and G80models.
Upgrade your BMW with the Akrapovic Rear Wing Forged Carbon Fiber and experience the perfect blend of cutting-edge aerodynamics and premium craftsmanship.
The Akrapovic Rear Carbon Wing - BMW G20 M330i M340i G80 M3 is a high-performance aerodynamic upgrade designed for BMW M3, M330, M340i, and other compatible models. Crafted from lightweight, handcrafted carbon fibre and finished with a high-gloss lacquer, this rear wing combines stunning aesthetics with motorsport-inspired functionality. The wing features a swan neck design mounted on CNC-machined aluminium brackets, optimized for the perfect balance between weight and performance. High-grade titanium reinforcements ensure structural stability at pivot points, while the aerofoil design maximizes downforce and minimizes drag. Fully adjustable to three levels, this wing allows drivers to fine-tune their setup for optimal performance. Approved with ABE and KBA 31882 type certification, it is both functional and road-legal. The understated Akrapovič monochrome logo on each side adds a touch of sophistication to this high-performance accessory.
Upgrade your BMW with the Akrapovic Rear Carbon Wing and experience the perfect blend of motorsport performance and premium design.
If your engine has higher mileage, don't neglect rod bearing replacement! These bearings are sandwiched between the connecting rod and crankshaft journal and are prone to failure due to overheating, lack of lubrication, or general wear. Replace your rod bearings and prevent a spun bearing.
Starting with ACL’s high-performance bearing shells, our Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.
Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.
Kit includes:
Turner Motorsport WPC-Treated Race Series Rod Bearing Shells (8) Genuine BMW Connecting Rod Bolts (8) Assembly Lube (4 oz.)
Packaged by the enthusiasts at Turner Motorsport, this kit contains all the necessary hardware and gaskets that are needed when replacing your intake manifold.
Due to weak plastic construction and subpar flow, the B58 intake manifold is a common replacement component. If you're planning an intake manifold replacement, choose this kit for a seamless installation with new gaskets and Genuine BMW hardware.
Click "kit contents" for a detailed list of included components!
Featuring BFI Stage One 65A Billet Aluminum Engine Mounts and Installation Hardware!
From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.
To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 65A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.
To aid in replacement, the enthusiasts at Turner Motorsport have packaged these mounts with all associated hardware. This ensures a smooth and comprehensive installation, free of stress caused by broken or lost hardware!
Features:
Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 65A durometer bushings are geared toward the spirited driving enthusiast who wants better control over motor movement without sacrificing excessive vibrations. Choose BFI Stage 1 for a quality mount that eliminates drivetrain movement without adding excessive NVH.