BMW Drivetrain Parts for BMW 3 Series G20 (2019+)

Servicing your rear differential at regular intervals is important to ensure you maintain both performance and a long lifespan. Over time, the differential fluid can break down, lose its lubricating properties, and become contaminated with metal shavings and debris. Regularly replacing the fluid ensures that the gears and limited slip differential clutch packs are adequately lubricated, reducing wear and tear. Regular maintenance also helps identify potential issues before they become major problems.

This kit includes Genuine BMW differential fluid designed specifically for your M Sport differential and a brand new fill plug. The factory plugs include a rubberized seal that compresses over time and may not seal properly when reused.

One unique aspect of performing this service is the removal of the lower differential temperature sensor. Unlike many typical BMW differentials, this differential does not use a traditional drain plug and instead uses the temperature sensor as a drain plug. This sensor is removed to drain the differential fluid and is replaced before refilling. If you'd like to replace this sensor as well (not included in this kit), please see our recommended items or search BMW part number 33107847469.

NOTE: This kit includes 3 500ml bottles of diff fluid. BMW claims that only 1 Liter of fluid is necessary, but we found that 2 500ml bottles were insufficient. The third bottle included also allows for a minor flush of the old differential fluid before refilling.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This seal is found where the driveshaft connects to the differential.

Genuine BMW Shaft Seal - 50X78X10/15
 

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5,E63,E65,E70 X5,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F30,F32,F33,F36
 

Designed to absorb driveline vibrations and isolate the cabin from noise, vibration, and harshness (NVH), OE drivetrain mounts feature rubber inserts. While these inserts provide excellent sound and vibration absorption, they tend to deteriorate as your vehicle ages.

Fortunately, the enthusiasts at Turner Motorsport have created an all-inclusive kit for replacing all three drivetrain mounts and associated hardware.

This kit includes:

Engine Mount - Left Engine Mount - Right Transmission Mount Hex Bolts Torx Bolts Star Socket Screws Refer to the kit contents tab for part numbers and position information.

If you're seeking a high-quality, comprehensive kit to service all drivetrain mounts, look no further than this Genuine BMW service kit from Turner Motorsport.